Why can't I see recently imported images in my grid view?

I"m using Elements 12.  I recently imported new images and normally I can see the images in the grid view.  However, I cannot see these new images unless I click on each individual image to open the file.  All prior imported images are viewable in the grid view.

No, that just shows the carrier. I am looking for the setting>general>carrier tab from where you can select the carrier you want to connect to either automatically or manually. The previous iPhone 5 had it, Apple exchanged the set as it had a hardware problem and it's missing from the new set. Want to get it back

Similar Messages

  • Why can't I see recently uploaded photos in my grid view?  I have to click on the hourglass image to see each photo individually.

    Until recently, each time I upload photos from my camera or other source, I've been able to see the thumbnails in my "grid" view.  However, the most recent uploads only appear as hourglass thumbnails.  When I click on each thumbnail, the photo appears, but when I return to the grid view, only the hourglass thumbnails of the recently loaded photos show.  Photos loaded earlier appear as normal thumbnails in the grid view.
    Help!!

    If you want to control the size of the photos select them in iPhoto and export to a desktop folder using the various size options available during export - then attach to your e-mail from the folder
    LN

  • Why can't I draw over imported images?

    If someone could explain to me (in simple terms-I've only been using flash since friday and I don't know the names ofthings properly yet) why I can't draw over impoted images? I've animated something on paper and scanned in the frames. When I import them to flash it either deletes the line as soon as I draw it, or if I create a new layer the drawing stays in all frames, not just one. Pllllllease help, I'm desperate!

    When you create a new layer, you can use keyframes to display the image in just one frame. Add a keyframe just after the frame where the image should not be displayed. So rightclick in that frame, and click add keyframe. Then in the new keyframe you can remove the image.
    I believe you can use Flash to convert bitmap images to vector images, but I haven't used that function since Flash 2, so I don't know if that still exists. The result might be useless though if the images is too complex. But if it's okay, then you can edit the image itself. Otherwise draw on a layer on top of the image.

  • Why can't I see a preview image when opening files in InDesign?

    I have "Always save preview images with documents" checked in File Handling, also with Save As. But I can only see the CS3 ID icon in my folders on the desktop, and when opening a file in InDesign. I'm running 10.4.11. Shouldn't I be able to see a preview image of the first page of an InDesign file?
    Thanks!

    i think those preview images means that indesign saves a lowres image of every placed image inside indd. So you can open your indd in some other computer and see all placed images even if you don´t have all the original linked hires images transferred with indd.
    If you want to see your documents first page as document icon, use Bridge to browse your files. It recognizes a content of indd files and show first page as icon. .

  • Why can't I see the whole image?

    I can not see the whole image in the viewing area. All I get is a partial rectangular section, with the rest being either white, or checkerboard. It doesn't matter what size the image is, nor how many layers, or even whether I use the 32 or 64 bit versions of the software. I even have the same problem when I create a new image from scratch. It doesn't matter whether I reboot the system either.
    I am using Windows Vista, on a two year old machine, but it does have a powerful processor, and 4GB of RAM. I've checked the system resources, and the CPU is only 25% occupied with 2GB or RAM to spare... so what gives?

    You need an updated display driver.
    Go to the web site of the maker of your video card (not Microsoft), and locate their current release for your hardware and OS.  Download and install, and it will almost certainly solve this issue.
    -Noel

  • Why can't I see these results in the results grid

    If I run the pl/sql below as a script F5 I can see the results of the "select * from TestOutput", but If I execute it with F9 I don't see any results in the results grid. Anybody know why? Thanks in advance for any help.
    CREATE TABLE TestOutput (val1 varchar2(50), val2 varchar2(255) , numval1 NUMBER, numval2 NUMBER);
    DECLARE
    SomeText VARCHAR2(255);
    BEGIN
    SomeText := 'Hello';
    INSERT INTO TestOutput VALUES ('yadayada', SomeText, 1, 1);
    INSERT INTO TestOutput VALUES ('yadayada', SomeText, 2, 2);
    INSERT INTO TestOutput VALUES ('yadayada', SomeText, 3, 3);
    END;
    select * from TestOutput;
    drop table TestOutput;

    I think that you he is executing all the commands of a time, selecting everything and click in F9 or F5.
    If he will be this, this behavior is correct.
    Ps.:
    F5 - scripts.
    F9 - alone statements (not to be that they are separate for semicolons).

  • I just upgraded to Lightroom CC5 from 4, and the card will only download 1 image from my recent shoot of 10 images. Why can't I see the other images?

    Lightroom 5 will only download one image from my card, when I shot 10. Iphoto doesn't have a problem with it. I never had this problem with Lightroom 4.

    Sort by capture time and the images won't be "scattered all over the place".
    Just show "NEW" photos in the import.
    As Jim said, reformat your card after all your backups are done and verified.

  • Why can't I see my iPhone images in Finder?

    5-6 year old iMac with 10.6.8
    iPhone 4
    Yes, I can import into iPhoto, but since I do my editing in Picasa I'd rather just drag or import straight from Finder. Yes, I can start messing with iCloud but really all I want is to see any files or images on my iPhone in the Finder so I can simply and easily access them.
    I'm starting to get really sick of my iMac and its OS, not being able to do this is one of the reasons that's pushing me further and further toward just building my own Windows PC instead of dealing with compatibility and access/forced application usage issues.
    Cheers,
    PL

    Did you try to use Image Capture?
    If you do not have iPhoto installed on your computer, you can import pictures from the device using Image Capture:
    Connect the iOS device to the computer.
    If Image Capture does not open automatically, you can navigate to your Applications folder and open Image Capture from there.
    Choose the location to which you'd like to import pictures.
    Click Options.
    Click the Options tab if it isn't already selected.
    Enable the option "Delete items from camera after downloading".
    Note: Deleting photos after importing helps to reduce Camera Roll size, and it improves backup and restore times. You may choose Keep Photos if you wish to import the photos to additional computers.
    Click OK.
    Click Download All.

  • Why can't i see my imported photos in lightroom?

    When I import photo's to Lightroom 5.7.1, they are not visible, but I do see that the correct number of images have been imported into the program.

    Terrific, Frank!
    I just knew, if somebody here can solve a tricky Trash problem, it would be you.
    I am trying to explore your solution a bit for future similar cases:
    Finding the Trash in the "Albums" section is disconcerting, since it is behaving more like a project - at least, it is  supposed  to be containing images like a project and not referencing them like an album.
         So, where is the actual Trash container?
    Experimenting with quitting Aperture and then removing the " trashAlbum.apalbum", I found that Aperture does recreate it, when running a "Repair database". Rebuild does not seem to be necessary, if there is not an issue with the library. But without rebuilding or repairing, even adding items to the Trash or emptying the Trash did not recreate this album. Probably Aperture did still hold a cached version. I could not restart the system  before launching Aperture again, because I had a backup running.
    Inside this folder are two folders Albums and Folders
    Just for the sake of completeness - my "Database" folder is showing a lot more folders inside:
    Albums, apdb, Faces, Folders, History, Places, Vaults, Versions, VersionGroups, Volumes
    plus propertylists:  ActiveWebPublishingAccounts.plist, BigBlobs.apdb,
    DataModelVersion.plist, Faces.dbHistory.apdb, ImageProxies.apdb, KeywordSets.plist,
    Keywords.plist, Library.apdb,  Properties.apdb, tmSync.plist, ZoomLevelCache.plist
    -- Léonie

  • Silly question but why can't I see my rejected images

    I'm sure there's a really easy solution to this. When I reject an image with an 'x' it disappears from my viewer. I know it's still in the same project because I can see it in the 'Rejected' project folder and check its master location. What I want to do is look at my rejects alongside my other rated images in the same project. Is there a quick filter option I've clicked without realizing?
    Thanks in advance...

    Another approach is to set up a Smart Album with Rating is X (slider to left) selected; then you can look at your rejects anytime.
    To make the point even clearer, you can name the album "Rejects [Rating = X]" or similar.
    iMac Intel Duo   Mac OS X (10.4.7)  

  • Why can't I see recent history, not just last maonth??

    I would like to see all my browsing history, not just last month or part of the current month??? How can I set this??

    You can enter a common character like a colon (:) in the search bar in the Bookmarks/History Manager (Library) to see all history items.

  • Why can't I see recent sent messages on my Macbook Air?

    My recent sent messages do not show in my sent mail list

    Downloading the iPad app into iTunes would not have any effect on your MacBook Air as it is an iPad app. iPad apps won't install or run on a MacBook as the iPad and MacBook have 2 different operating systems. Some developers offer 2 versions of an app with similar capabilities (one for iOS iPad and one for OS X Mac) but it appears there is no Mac app for it.
    I did try using their website http://www.readwritethink.org/parent-afterschool-resources/games-tools/timeline- a-30246.html#overview and was able to save from there on my MacBook Air using Safari version 8.0

  • Why can't I see the imported video if the event appears in my event library

    I have imported a single video file from my hard drive containing a rugby game (1,4 GB). A window appears in IMovie indicating that it is importing the video and that it will be over in x minutes. Then, the new event appears in the the event library but no video appears. I have selected the all clips option, so it is not a matter of having made that mistake. I have opened the finder and the clip appears there within the imovie files, but I have not been able to edit it. PLEASE HELP.

    I have imported a single video file from my hard drive containing a rugby game (1,4 GB). A window appears in IMovie indicating that it is importing the video and that it will be over in x minutes. Then, the new event appears in the the event library but no video appears. I have selected the all clips option, so it is not a matter of having made that mistake. I have opened the finder and the clip appears there within the imovie files, but I have not been able to edit it. PLEASE HELP.

  • Why can't i see the chart i created in CR Viewer in SAP?

    Can anyone give me a hint on this? thanks.  i already tried using print preview in Crystal Reports 2008 and the chart appear but when using the CRystal Reports Viewer the chart i created does not appear.
    Edited by: Michael Litiatco on Jun 12, 2009 9:00 AM

    Hi,
    Not only charts, if you have any images like logo of the company will not be visible but when you export your report to any of the format there you find your charts, strange!!! Try exporting your report and see.
    I assume you are using .NET Infoview.
    Here is a solution,
    It is a .Net version mismatch, change the version from 1.x to 2.x for crystalreportviewers115 virtual directory.
    Steps
    1. Right-click My Computer and click Manage.
    2. Navigate to Services and Applications > Internet Information Services (IIS) Manager > Web Sites > Default Web Site.
    3. Right-click crystalreportviewers115 and then click Properties.
    4. On the ASP.NET tab, choose a 2.0.x version from the ASP.NET Version list.
    5. Click the Apply button and then click OK.
    6. Right-click businessobjects and click Properties.
    7. On the Virtual Directory tab, click the Configuration button.
    8. Check the path of the mappings and note the version number (in the path ...\Framework\vX.X...)
    9. Repeat steps 2 to 5 for crystalreportsviewers115.
    If the paths for businessobjects and crystalreportviewers115 are different, change one or the other so that they point to the same version of .NET Framework.
    10. Stop and restart the Default Web Site
    Hope this helps,
    Thanks
    -Azhar

  • I imported 635 images into an iPhoto album so that I can share them via a photo-stream. However, iPhoto says there are only 600. When I try to add the missing images it says they are already there. Why can i not see these images in iPhoto?

    I imported 635 images into an iPhoto album so that I can share them via a photo-stream. However, iPhoto says there are only 600. When I try to add the missing images it says they are already there. Why can i not see these images in iPhoto?

    Generally I would not use Facebook for sharing any photos, it compresses the photos substantially, and when you have shadows and dark colours you get visible "bands" where there should be subtle gradients, ie at sunsets and sunrises.
    It sounds like you are using two methods to upload to Facebook:
    1. Sharing from within Aperture, which basically syncs Facebook with your Aperture album, so any changes made at either end gets synced, hence the deletions from Albums, although the original file should still be in your library, just removed rom the album. It is like a playlist in iTunes.
    2. Exporting pics and uploading to Facebook from the browser.
    I am not sure how method 1 gets compressed, but I know that uploading hi-res jpegs to Facebook using method 2 results in poor quality images.
    I wouldn't even bother comparing option 1 or 2, and they will both be poor images once you view them on Facebook, as opposed to viewing uploaded images on proper image sharing / hosting sites.
    Your problem is not with Aperture, it is using Facebook for showing your work.
    If you export pics form Aperture at high res jpegs or TIFFs your images will be fine.
    If you insist to use Facebook as your way to share your work, then your workflow should be this:
    1. Right click images you want to share.
    2. Select Export version.
    3. Export as 100% size and ensure the export settings are set at 100% quality.
    4. Upload this pic into Facebook.
    This will get you the best image size and resolution on Facebook.
    See how you go.

Maybe you are looking for