Why can't I send imesseges from America to Britain?, Why can't I send imesseges from America to Britain?

I sent messages to my friend in Britain one night but the next morning i can't send any imessages to her.

What happens when you try?

Similar Messages

I'm staying at my house in Peru, South America. From my PC laptop I can see my neighbor's wifi service network, but I also have my mini iPad and I can not figure out why I can't get any wifi connection from my area. Is there a setting I need to do?

I'm staying at my house in Peru, South America. From my PC laptop I can see my neighbor's wifi service network, but I also have my mini iPad and I can not figure out why I can't get any wifi connection from my area. Is there a setting I need to do?

Yes, I did try to go on my settings>wifi and was waiting for any wifi signals to pick up, but nothing shows up. But on my PC I get a whole list of networks to choose from. Regarding my neighbor, I already have her password that is why I was able to get it on my PC, the problem is that the mini Ipad is not picking any signal neither can it locate me when I go to maps.

I own osx mountain lion with messages.When i go to create a new message i dont undrestand why you can send it to their email.also is it possible to send a message from my mac to another mac that has mountain lion. MacBook, OS X Mountain Lion, help me

I own osx mountain lion with messages.When i go to create a new message i dont undrestand why you can send it to their email.also is it possible to send a message from my mac to another mac that has mountain lion.
MacBook, OS X Mountain Lion, help me

The recipient needs to have Messages set up with the e-mail. Check the image below:
Hope it heps.
JP

I can send SMS from my online number why can't I g...

I can send SMS from my online number why can't I get his texts back? If I pay for the skype calling and online number this should work too.

Maggie143 wrote:
I can send SMS from my online number why can't I get his texts back? If I pay for the skype calling and online number this should work too.
Hello,
Skype doesn't support receiving SMS messages.
TIME ZONE - US EASTERN. LOCATION - PHILADELPHIA, PA, USA.
I recommend that you always run the latest Skype version: Windows & Mac
If my advice helped to fix your issue please mark it as a solution to help others.
Please note that I generally don't respond to unsolicited Private Messages. Thank you.

Why can't I send a text to a contact from my I-pad but can send to that contact from my I-phone?

Why can't I send a text to a contact from my I-pad but can send to that same contact on my I-phone

Are you saying you are successful in sending text messages to Android users from your iPad? I doubt you can do that as iPad does not SMS, which is what a cell phone does, but iPad is not a cell phone. The Message App in iPad was designed to let you send messages to other iOS based devices.
There are Apps you can get from the App Store, like TextFree, which will assign a number to your account, but from iPad you can text all your contacts regardless of type of device. You will however need to let everyone you message with know what number a message would come from as it won't come from your cell number.

I can no longer send picture e-mails from my ipod. Why?

I use to be able to send pictures from the Photos app to my e-mail. Now when I try & send them, I never get them. I also tried sending them to the Facebook mail, but again- never get them. No error message pops up on my ipod. Any suggestions?

Oh my goodness! Thank you sooo much! This worked. I can now stop sending the business e-mails from my personal account - ha ha. Since you helped me with this, maybe you can help me with one more thing. I haven't been able to attach to e-mails in this account for quite awhile now, just been using a jump drive, since a previous automatic update. I didn't obsess over it due to the fact that I could still send e-mails. Any more help you can provide is greatly appreciated!
By the way, you also put it in terms I could understand. I'm not computer illiterate, just not as up to date as I should be. Step-by-steps help alot! :D

How do I block unsolicited e-mail(s) from unsolicited senders? Why isn't there an auto option that simply pops up and asks if you wish to block this sender from future e-mails? I am so tired of my e-mail address being sucked out of a friends address book,

How do I block unsolicited e-mails from the sites that have stolen my e-mail address from a friends address book, and send me non-stop horrid e-mails. Why is there no pop-up to ask if "want sender blocked", to easily solve this problem? Seems like it would be such an easy solution to what must be a universal problem with these e-mail pirates.

It is frontiernet.com that would need to block the emails.
You can setup a Mail "Rule" to send email you do not want into the trash, or a spam folder, etc...
In fact, there is a Mail -> Message -> Mark -> as Junk Mail, which will train Mail to reconize junk mail and start to automatically move it to a junk mail folder.
You can put this option on the Mail toolbar via Mail -> View -> Customize Toolbar, and drag the "Junk" icon to your Mail Toolbar.
But of course Junk takes training. You can create a Rule to trash the emails you do not want right away via Mail -> Message -> Add Rule, or Mail -> Preferneces -> Rules

Why can I not print to my HP CM1415fnw from my Mac, but I can from my PC?

Why can't I print from my Mac 10.6.8 to my newly purchased HP CM1415fnw (supposedly air print enabled) but I can print to it from my PC? I thought mac's we're supposed to be easier and this printer is not discoverable wirelessly on my mac or iPad/iPhone/Ipod, but it is from my PC? I can only print from the mac/iPad/iPhone/iPod to this printer IF the wired cable is installed. Seems like HP has the problem, but the mac can't even pull up the printer's web page unless there is a wired ethernet connection. Yes, it is working just fine wirelessly with my PC's on the network.

Go to the Apple contact page and the first section should say something like "To purchase by phone, please call..."
Call this number and order a Snow Leopard DVD.
http://www.apple.com/??/contact/
replace the ?? with your country's address code, e.g. http://www.apple.com/uk/contact/
or if you are from America it's simply http://www.apple.com/contact/

Andriod and windows phones have an option in whatsapp to send songs then my question is why not from ios ?

andriod and windows phones have an option in whatsapp to send songs then my question is why not from ios ?

ok thanks
but there should some app by which it can be send

RS-485: PC can send/receive data from PCI card, but LabVIEW can only send to card.

I have a master/slave setup with a 2-wire RS-485 connection via a StarTech PCI2S485 card http://www.startech.com/product/PCI2S485-2-Port-PCI-RS-422-485-Card-with-DB9. A Vista PC running LabVIEW 2010 is acting as the master to 6 slave devices. I am running a driver VI supplied by the company that made the slaves.
I've used a terminal program called Termite to monitor the ports during operation and have concluded that both the PC and the slaves are sending correct data packets (i.e. correct protocol and reasonable data). Termite indicates that the slave's response is being received by the PCI card, but the problem is that LabVIEW simply isn't reading the response from the card. Each time the driver VI is run it returns a "timeout waiting for slave to respond" error.
The VI and slaves I am using are designed for both RS-232 and 485 communication. I've verified the VI to run in 232 mode on a different COM port. I also wrote a simple VI using the VISA functions to test the ports on the PCI card, but I've had the same results. Hardware connections have been looked over carefully, but the fact that the card actually sends a correct message and receives a correct message indicates a different problem.
Any idea why LabVIEW can talk to the PCI card but can't hear it? Is there anything I can do about this, or does LabVIEW generally not like StarTech's PCI2S485 cards?
Thanks,
Tim

Tim359 ha scritto:
I have a master/slave setup with a 2-wire RS-485 connection via a StarTech PCI2S485 card http://www.startech.com/product/PCI2S485-2-Port-PCI-RS-422-485-Card-with-DB9. A Vista PC running LabVIEW 2010 is acting as the master to 6 slave devices. I am running a driver VI supplied by the company that made the slaves.
I've used a terminal program called Termite to monitor the ports during operation and have concluded that both the PC and the slaves are sending correct data packets (i.e. correct protocol and reasonable data). Termite indicates that the slave's response is being received by the PCI card, but the problem is that LabVIEW simply isn't reading the response from the card. Each time the driver VI is run it returns a "timeout waiting for slave to respond" error.
The VI and slaves I am using are designed for both RS-232 and 485 communication. I've verified the VI to run in 232 mode on a different COM port. I also wrote a simple VI using the VISA functions to test the ports on the PCI card, but I've had the same results. Hardware connections have been looked over carefully, but the fact that the card actually sends a correct message and receives a correct message indicates a different problem.
Any idea why LabVIEW can talk to the PCI card but can't hear it? Is there anything I can do about this, or does LabVIEW generally not like StarTech's PCI2S485 cards?
Thanks,
Tim
RS232 interface consist of 2 indipendent communication crossed lines between 2 devices (9DSub connector: Pin 2-RX Pin 3-TX pin 5-Gnd)
RS485 interfaceis a bus, shared between 2 or more devices. (like ethernet or CAN Bus)
This means that an incorrect use of the bus can lead to a "packet collision" if 2 or more devices try to send a message on the bus at the same time or at least their messages, partially "overlap"
About 10 years ago I have used a PCI 2 RS485 port: I remember that I have to change the status of RTS serial control line to switch between transmit and receive mode.
This can be done using the serial VISA property:
Serial Settings --> Modem Line Settings --> DTR State
or using the VI
<LabVIEW dir>\vi.lib\Instr\_sersup.llb\serial line ctrl.vi   (LV 8.6.1)
The result was that the slave device connected, send me the response after few nanosec. causing the lost of the answer.
because LabVIEW use more than some nanosec. to change RTS property after sending message on the 485 bus calling a VISA Write.
So for me there was 2 possibilities:
- use 2 RS485 port (1 for transmit 1 for receive echo transmit included)
- use this converter
         http://www.advantech.com/products/ADAM-4521/mod_2E78D425-8B08-43F6-81B0-1B924E53E075.aspx
this converter, after sending a message on the bus, electronically switchs back to receive mode without losing a byte.
But the question is :
what does it means
"RS-485 mode supports Auto Transceiver turn around (ATTA)"
of your card?
bye

I called apple tech support cause my iphone 5 charger just stopped working. Aplle tech support said they can send me a new charger but why do they need credit card information if i have only had the the charger for 2 months and i have 1 year warranty?

I called apple support because my iphone 5 charger stopped working and they said they would send me a new charger but why do they need credit card information if every apple product has 1 year warranty?

Hi CryyCorr33
Sound like they did what is called an express replacment. What apple does is they put a hold on your Credit Card for the amount of the cord because they are sending you the cord first. Then, once you receive the new cord in about 2-3 days, you'll put the defective cord in the box and ship it back out and when they receieve the defective one, they'll be able to remove that hold from you card.
I believe the reason behind the hold on your card is incase you don't return your defective one to them so they can find out the cause of the issue.
An Apple Retail Store could swap them out for you in store incase you happen to be near one. This requires no hold.
Hope this helps

I am new to mac. just purchaased it 3 weeks ag along with MS office for mac, i notice that all my outlook email are in this finder folder, can i delete these email files from this location? why are they there anyway?

I am new to mac. just purchaased it 3 weeks ag along with MS office for mac, i notice that all my outlook email are in this finder folder, can i delete these email files from this location? why are they there anyway?

Cherry63 wrote:
I am talking about the icon on the docking row, that's the guy with the smily face. When you click on him it brings up a bunch of files of what I seem to have store/created on my Imac. There are hundreds of emails and some other documents. I tried to delete a few of them when I first got the MS office but it did not like that, it said it have to rebuild oulook. Why cant i delete these files? is this Apple version of Window outlook PST files?
These file extenssions are listed as
olk14_message or even or ccontact. I wish I could send a screen print but I dont see that on the key board. Maybe I should have stuck with windows..
Oh the ...olk14_message's. Do not delete them behind Outlooks back, i.e., from the finder. Those are the various messages that you sent, received, or deleted in Outlook. They are indexed by Outlook so if you delete behind Outlook's back Outlook will get confused trying to access those messages.
You can delete them however using Outlook itself. In outlook select a mailbox (Drafts, Sent Items, Deleted Items, etc.) by clicking on the mailbox on the left. It will show you the messages in that mailbox. You can now select all or selected items in that mailbox. The click the Edit menu and select Delete. You will get a dialog asking if you really want to delete the selections. Answer "Delete" and the messages will get deleted.
The olk14_message's you are seeing are the actual messages shown the Outlook mail boxes. When you actually delete them the way I just described the corresponding olk14_message files will also be deleted.
Note Outlook's Deleted Items mailbox is where all deleted messages go when you click the Delete tool in the Outlook toolbar. Thus using the Delete tool from the toolbar does not permanently delete the messages. So if you been using that for months or years you are going to have a very large Deleted Items mailbox. And every one of those items in there is going to have a corresponding olk14_message file for that message.
So if those olk14_message files you are seeing are from the Deleted Items mailbox you can get rid of all those corresponding olk14_message files by selecting all the messages in Deleted Items and using the Edit menu's Delete.
Alternative ways to the Edit/Delete to do the permanent delete is select (all) the messages to delete and control (right) click to bring up the Outlook contextual menu and select Delete from it.
Finally if you use the Delete tool in the toolbar for messages selected in the Deleted Items mailbox you will be able to permanently delete those too. It's an exception since using the tool on the Deleted Items means there's no place to put those messages except to "oblivion".
So, in summary, using the Delete tool in the toolbar on messages in every mailbox except the Deleted Items mailbox just moves messages to the Deleted Items mailbox. But using the Delete tool on items in them Deleted Items mailbox permanently deletes the selected items in there. And only permanently deleting items removes the corresponding actual ...olk14_message files.

My SMTP setting is gone from my iPhone and I can't send emails. How do I fix it?

Hi,
My SMTP setting is gone from my iPhone and I can't send emails. How do I fix it? Under my email settings the whole server part is missing and I don't know why it's gone or how that happened.
How do I fix it?
Thanks

Delete the account and re-add it.
Standard troubleshooting steps from the manual are restart, reset, restore as new. Which ones have you tried???

Why can't I send a text with imessenger but I can send a picture

I have upgraded to ios5 on my ipad2 and I cannot send a message through imessenger but I can send a picture. The send button is not lit up when I type a message.

Care to elaborate? I don't want to have to type each name individually. I would like to select the group and have the message sent to everyone in that group. As far as I can tell, this is not currently an option on iPhone. I don't understand why.
To clarify, I understand that I can send a message to a group of people. I want to be able to select a pre-created group from my contacts and send a message to everyone in that group.

I cannot open iCal because of a problem. Can anybody help me? The computer will not allow it to open and sends a message to apple each time. The icon has gone from the dock, but ical works on my iPad and I am afraid to sync it with my computer.?

I cannot open iCal because of a problem. Can anybody help me? The computer will not allow it to open and sends a message to apple each time. The icon has gone from the dock, but ical works on my iPad and I am afraid to sync it with my computer in case it wipes everything .

I have the exact same problem. I have not changed anything. This is probably a bug or something that has gone bad with Mac OS X (10.7.2). I have not found any solution for this on the web.
MacBook Pro, Mac OS X (10.7.2).

Why does iTunes/iPhone 4S insist it can't find a song on my PC or my phone when it is on both? This is resulting in me being unable to use the ringtones I created from these songs, but I can still play the songs.

OK, so I'm clearly a newb. I thought if I asked a question, it would post, and now I'm being told to post a comment, so I'm asking the same question again. Sorry I sound like an idiot. I'm new to this apple/mac stuff.
Why does iTunes/iPhone 4S insist it can't find a song on my PC or my phone when it is on both? This is resulting in me being unable to use the ringtones I created from these songs, but I can still play the songs.

If you have added the ringtone file correctly to iTunes, it will appear under iTunes 'Tones' library.
If you don't find Tones library in iTunes, go to iTunes menu EDIT/PRFERENCES under GENERAL tab, check the Tones Box under Library source to display Tones library in iTunes.
iTunes accepts only m4r file as ringtone and has to be less than 40secs.

Why can't I send imesseges from America to Britain?, Why can't I send imesseges from America to Britain?

Similar Messages

Maybe you are looking for