Why can't I start up Age of Empires lll

Hi all
Can anyone tell me why I can't run the new Age of Empires lll on my iMac? has this thing really that old and cannot support this game? My nine year old is anxious to start. Here is what it says when I try to launch the game:
"Age of Empires lll requires a CPU running a 1150 MHz of faster."
-or-
"Your main video card must have at least 64MB of VRAM to play Age of Empires lll"

Hello Bitti and welcome to discussions,
I am sorry - Your computer is just not up to the job!
System Requirements:
G4/G5 or Intel processor running at 1.4GHz or faster
Mac OS X v10.3.9 or higher
512MB RAM
64 MB Video Card (with support for hardware T & L). 56K dial-up Internet access or LAN for online play
Regards
Ian

Similar Messages

Hard drive failure (why can't I start up with boot disk)?

Running OS 10.4.6. I was getting flashing question mark at startup. Tried starting with Disk Warrior holding down "C" key. Got Apple logo, but then screen frooze with horizontal lines across screen.
Rebooted, held mouse to eject disk. Tried TechTool Pro disk. Would not boot from that either (got circle with slash logo I think).
Finally was able to boot with Tiger install disk.
Ran disk utility from Tiger disk. My internal hard drive showed up in red letters and said "failing"
OK.....I can understand that.....I guess my hard drive crashed (on my 2 year old Powerbook...oh well)
But, why can't I start up with any of my boot disks (Disk Warrior, TechTool) only the Tiger install disk. Also the Panther and Jaguar disks will NOT start it...only the Tiger disk works. One more thing I'm wondering....I connected my external firewire drive that has a boot partition on it that I have started up with in the past....and it won't boot my laptop either.
Any ideas? Thanks for any insight. Guess I'll head to the genius bar tomorrow. At least my extended warranty is still good (I think).
Powerbook G4 17 1.5 ghz Mac OS X (10.4.6)

Here is what the outcome was:
I took my Powerbook into Apple Genius bar (still under 3 yr. AppleCare), he determined that my hard drive had crashed. He shipped it for me to be repaired.
It came back with a message attached saying that the source of the problem was my 3rd party RAM, which was a 1 GB module. The note said that the memory had been removed...and that in some cases like this the removed memory will be sent back to the customer and will be in the box somewhere. I checked and it wasn't there. The "Get Info" for my system said I was now running on 512 mb instead of the usual 1.5 GB. The note said that this 3rd party RAM had caused the hard drive to fail, so the hard drive had been replaced.
I ordered a new 1GB RAM module from Apple for $300, didn't want to take a chance on 3rd party again. But....when it arrived, I went to install it....and my 1GB 3rd party module was in the slot....it just wasn't pushed all the way in I guess. I pushed it in firmly, closed up the computer, started it, and the "Info" read 1.5 GB again. I ended up removing the 512mb module and replacing that with the new 1GB one I bought from Apple. So now I have 2GB of memory and and extra 512 that I can't use. It has been running fine ever since (more than 2 months)
Can bad RAM really make a hard drive go bad?
I wonder why they said they had removed the RAM, but it actually had not been removed (at least not completely)
Powerbook G4 17 1.5 ghz Mac OS X (10.4.7)

Why can't i start my program?

why can't I start my program?

I don't know. Why can't you?
(We need more information than a single line question!!)

Why can't i start my oracle 9.2.0.1.0 under Redhat linux 8.0??

When i installing oracle, after copying the files, it telled me "install successfully" , but when it in the procedure: "Linking Oracle9i Database 9.2.0.1.0", it stop and auto exit.
But I think i should have installed finish. So I try to start it. As below:
sqlplus /nolog
SQL> connect / as sysdba
ERROR:
ORA-09925: Unable to create audit trail file
Linux Error: 2: No such file or directory
Additional information: 9925
ORA-01031: insufficient privileges
How can I start it?
Is that because I hadn't set the value of "/proc/sys/kernel/sem" before I install oracle? It's original value is "250 3200 32 128", I don't know what it should be under Redhat Linux 8.0.
Can anybody help me?
thanks.

I followed the directions here
http://www.puschitz.com/OracleOnLinux.shtml
Using this I was able to get 9201 installed on both SuSE8.1 and RedHat8.0.
On RH8, You have to hand modify the ins_ctx.mk per his instructions and up the value in /proc/sys/kernel/shmmax per his instructions. I did not hit the binutils issue. Other failures are probably missing rpms, as he describes.

Why can't modify the vlan aging time

4506-1#sh mac add aging-time
Vlan    Aging Time      Configured Aging Time
Global Vlan Admin Age: 300
   1    300             300
100    300             300
300    300             300
500    300             300
501    300             300
502    300             300
503    300             300
600    15              300
I don't do any aging time Settings, why aging time is 15? I don't have change to take effect.

Duplicate post of Why cisco WS-C4506-E Switches High CPU?

Why can't I start DBA STUDIO on my computer?

My computer's OS is MS windows 2000 advanced server and it has 4 cpu and 2GB RAM.I start my dba studio and work on it normally these days until this morning the problem came.I click the menu "DBA STUDIO" in the start menu,the certain picture didn't come out and so I couldn't go into the program.
By the way,I had start the services before that.I also tried the way so as restarting my computer and the services.
Thank u in advance!

If you've activated fast user switching, more than one account can be logged in at the same time. There would be a menu item showing your user name to the left of the Spotlight menu.

Why can´t I start my Movie? Error (-42110)

Hello,
when i wanna start my rented movies, there is a error!
Error -42110 .
I have this problem since 3 months.
I paid for 3 movies, i didn´t see one!
Can anyone help me?
maxi

Perhaps try the "Error 3001," "-42110," or "5103" section in the Specific Conditions and Alert Messages: (Mac OS X / Windows) section of the following document:
iTunes: Advanced iTunes Store troubleshooting

Why can't I start my iphone?

I can not start my iphone, what can I do?

http://www.apple.com/support/iphone/assistant/phone/#section_1

Why can't I start most windowMakers ecxept xfce4

This is my kde err:
xsetroot: unable to open display ''
xset: unable to open display ""
xset: unable to open display ""
xset: unable to open display ""
xsetroot: unable to open display ''
startkde: Starting up...
startkde: Running kpersonalizer...
kwin: cannot connect to X server
kpersonalizer: cannot connect to X server
kpersonalizer: cannot connect to X server
kpersonalizer: cannot connect to X server
kpersonalizer: cannot connect to X server
kpersonalizer: cannot connect to X server
kpersonalizer: cannot connect to X server
kpersonalizer: cannot connect to X server
kpersonalizer: cannot connect to X server
kpersonalizer: cannot connect to X server
kpersonalizer: cannot connect to X server
kpersonalizer: cannot connect to X server
kpersonalizer: cannot connect to X server
kpersonalizer: cannot connect to X server
kpersonalizer: cannot connect to X server
kpersonalizer: cannot connect to X server
kpersonalizer: cannot connect to X server
kpersonalizer: cannot connect to X server
kpersonalizer: cannot connect to X server
kpersonalizer: cannot connect to X server
kpersonalizer: cannot connect to X server
when i start other wms like openbox, fluxbox, they return:
cannot open display ''
I can only run xfce4, and I think my xorg.conf is correct as you can see below:
Section "ServerLayout"
Identifier "XFree86 Configured"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "PS/2 Mouse" "CorePointer"
# Serial Mouse not detected
# USB Mouse not detected
EndSection
Section "ServerFlags"
Option "AllowMouseOpenFail" "true"
EndSection
Section "Files"
RgbPath "/usr/X11R6/lib/X11/rgb"
ModulePath "/usr/X11R6/lib/modules"
FontPath "/usr/X11R6/lib/X11/fonts/misc:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/misc"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi"
FontPath "/usr/X11R6/lib/X11/fonts/PEX"
# Additional fonts: Locale, Gimp, TTF...
FontPath "/usr/X11R6/lib/X11/fonts/cyrillic"
# FontPath "/usr/X11R6/lib/X11/fonts/latin2/75dpi"
# FontPath "/usr/X11R6/lib/X11/fonts/latin2/100dpi"
# True type and type1 fonts are also handled via xftlib, see /etc/X11/XftConfig!
FontPath "/usr/X11R6/lib/X11/fonts/Type1"
FontPath "/usr/share/fonts/ttf/western"
FontPath "/usr/share/fonts/ttf/decoratives"
FontPath "/usr/share/fonts/truetype"
FontPath "/usr/share/fonts/truetype/openoffice"
FontPath "/usr/share/fonts/truetype/ttf-bitstream-vera"
FontPath "/usr/share/fonts/latex-ttf-fonts"
FontPath "/usr/X11R6/lib/X11/fonts/defoma/CID"
FontPath "/usr/X11R6/lib/X11/fonts/defoma/TrueType"
EndSection
Section "Module"
Load "ddc" # ddc probing of monitor
Load "GLcore"
Load "dbe"
Load "dri"
Load "extmod"
Load "glx"
Load "bitmap" # bitmap-fonts
Load "type1"
Load "freetype"
Load "record"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "keyboard"
Option "CoreKeyboard"
Option "XkbRules" "xfree86"
Option "XkbModel" "pc105"
Option "XkbLayout" ""
Option "XkbVariant" "nodeadkeys"
EndSection
Section "InputDevice"
Identifier "Serial Mouse"
Driver "mouse"
Option "Protocol" "Microsoft"
Option "Device" "/dev/ttyS0"
Option "Emulate3Buttons" "true"
Option "Emulate3Timeout" "70"
Option "SendCoreEvents" "true"
EndSection
Section "InputDevice"
Identifier "PS/2 Mouse"
Driver "mouse"
Option "Protocol" "auto"
Option "ZAxisMapping" "4 5"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "true"
Option "Emulate3Timeout" "70"
Option "SendCoreEvents" "true"
EndSection
Section "InputDevice"
Identifier "USB Mouse"
Driver "mouse"
Option "Device" "/dev/input/mice"
Option "SendCoreEvents" "true"
Option "Protocol" "IMPS/2"
Option "ZAxisMapping" "4 5"
Option "Buttons" "5"
EndSection
# Auto-generated by Archie mkxcfg
Section "Monitor"
Identifier "Monitor0"
Option "DPMS" "true"
# HorizSync 28.0 - 78.0 # Warning: This may fry very old Monitors
HorizSync 28.0 - 71.0 # Warning: This may fry old Monitors
VertRefresh 50.0 - 160.0 # Very conservative. May flicker.
# VertRefresh 50.0 - 62.0 # Extreme conservative. Will flicker. TFT default.
# Default modes distilled from
# "VESA and Industry Standards and Guide for Computer Display Monitor
# Timing", version 1.0, revision 0.8, adopted September 17, 1998.
# $XFree86: xc/programs/Xserver/hw/xfree86/etc/vesamodes,v 1.4 1999/11/18 16:52:17 tsi Exp $
# 640x350 @ 85Hz (VESA) hsync: 37.9kHz
ModeLine "640x350" 31.5 640 672 736 832 350 382 385 445 +hsync -vsync
# 640x400 @ 85Hz (VESA) hsync: 37.9kHz
ModeLine "640x400" 31.5 640 672 736 832 400 401 404 445 -hsync +vsync
# 720x400 @ 85Hz (VESA) hsync: 37.9kHz
ModeLine "720x400" 35.5 720 756 828 936 400 401 404 446 -hsync +vsync
# 640x480 @ 60Hz (Industry standard) hsync: 31.5kHz
ModeLine "640x480" 25.2 640 656 752 800 480 490 492 525 -hsync -vsync
# 640x480 @ 72Hz (VESA) hsync: 37.9kHz
ModeLine "640x480" 31.5 640 664 704 832 480 489 491 520 -hsync -vsync
# 640x480 @ 75Hz (VESA) hsync: 37.5kHz
ModeLine "640x480" 31.5 640 656 720 840 480 481 484 500 -hsync -vsync
# 640x480 @ 85Hz (VESA) hsync: 43.3kHz
ModeLine "640x480" 36.0 640 696 752 832 480 481 484 509 -hsync -vsync
# 800x600 @ 56Hz (VESA) hsync: 35.2kHz
ModeLine "800x600" 36.0 800 824 896 1024 600 601 603 625 +hsync +vsync
# 800x600 @ 60Hz (VESA) hsync: 37.9kHz
ModeLine "800x600" 40.0 800 840 968 1056 600 601 605 628 +hsync +vsync
# 800x600 @ 72Hz (VESA) hsync: 48.1kHz
ModeLine "800x600" 50.0 800 856 976 1040 600 637 643 666 +hsync +vsync
# 800x600 @ 75Hz (VESA) hsync: 46.9kHz
ModeLine "800x600" 49.5 800 816 896 1056 600 601 604 625 +hsync +vsync
# 800x600 @ 85Hz (VESA) hsync: 53.7kHz
ModeLine "800x600" 56.3 800 832 896 1048 600 601 604 631 +hsync +vsync
# 1024x768i @ 43Hz (industry standard) hsync: 35.5kHz
ModeLine "1024x768" 44.9 1024 1032 1208 1264 768 768 776 817 +hsync +vsync Interlace
# 1024x768 @ 60Hz (VESA) hsync: 48.4kHz
ModeLine "1024x768" 65.0 1024 1048 1184 1344 768 771 777 806 -hsync -vsync
# 1024x768 @ 70Hz (VESA) hsync: 56.5kHz
ModeLine "1024x768" 75.0 1024 1048 1184 1328 768 771 777 806 -hsync -vsync
# 1024x768 @ 75Hz (VESA) hsync: 60.0kHz
ModeLine "1024x768" 78.8 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
# 1024x768 @ 85Hz (VESA) hsync: 68.7kHz
ModeLine "1024x768" 94.5 1024 1072 1168 1376 768 769 772 808 +hsync +vsync
# 1152x864 @ 75Hz (VESA) hsync: 67.5kHz
ModeLine "1152x864" 108.0 1152 1216 1344 1600 864 865 868 900 +hsync +vsync
# 1280x960 @ 60Hz (VESA) hsync: 60.0kHz
ModeLine "1280x960" 108.0 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync
# 1280x960 @ 85Hz (VESA) hsync: 85.9kHz
ModeLine "1280x960" 148.5 1280 1344 1504 1728 960 961 964 1011 +hsync +vsync
# 1280x1024 @ 60Hz (VESA) hsync: 64.0kHz
ModeLine "1280x1024" 108.0 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync
# 1280x1024 @ 75Hz (VESA) hsync: 80.0kHz
ModeLine "1280x1024" 135.0 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync
# 1280x1024 @ 85Hz (VESA) hsync: 91.1kHz
ModeLine "1280x1024" 157.5 1280 1344 1504 1728 1024 1025 1028 1072 +hsync +vsync
# 1600x1200 @ 60Hz (VESA) hsync: 75.0kHz
ModeLine "1600x1200" 162.0 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
# 1600x1200 @ 65Hz (VESA) hsync: 81.3kHz
ModeLine "1600x1200" 175.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
# 1600x1200 @ 70Hz (VESA) hsync: 87.5kHz
ModeLine "1600x1200" 189.0 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
# 1600x1200 @ 75Hz (VESA) hsync: 93.8kHz
ModeLine "1600x1200" 202.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
# 1600x1200 @ 85Hz (VESA) hsync: 106.3kHz
ModeLine "1600x1200" 229.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
# 1792x1344 @ 60Hz (VESA) hsync: 83.6kHz
ModeLine "1792x1344" 204.8 1792 1920 2120 2448 1344 1345 1348 1394 -hsync +vsync
# 1792x1344 @ 75Hz (VESA) hsync: 106.3kHz
ModeLine "1792x1344" 261.0 1792 1888 2104 2456 1344 1345 1348 1417 -hsync +vsync
# 1856x1392 @ 60Hz (VESA) hsync: 86.3kHz
ModeLine "1856x1392" 218.3 1856 1952 2176 2528 1392 1393 1396 1439 -hsync +vsync
# 1856x1392 @ 75Hz (VESA) hsync: 112.5kHz
ModeLine "1856x1392" 288.0 1856 1984 2208 2560 1392 1393 1396 1500 -hsync +vsync
# 1920x1440 @ 60Hz (VESA) hsync: 90.0kHz
ModeLine "1920x1440" 234.0 1920 2048 2256 2600 1440 1441 1444 1500 -hsync +vsync
# 1920x1440 @ 75Hz (VESA) hsync: 112.5kHz
ModeLine "1920x1440" 297.0 1920 2064 2288 2640 1440 1441 1444 1500 -hsync +vsync
# Additional modelines
ModeLine "1800x1440" 230 1800 1896 2088 2392 1440 1441 1444 1490 +HSync +VSync
ModeLine "1800x1440" 250 1800 1896 2088 2392 1440 1441 1444 1490 +HSync +VSync
# Extended modelines with GTF timings
# 640x480 @ 100.00 Hz (GTF) hsync: 50.90 kHz; pclk: 43.16 MHz
ModeLine "640x480" 43.16 640 680 744 848 480 481 484 509 -HSync +Vsync
# 768x576 @ 60.00 Hz (GTF) hsync: 35.82 kHz; pclk: 34.96 MHz
ModeLine "768x576" 34.96 768 792 872 976 576 577 580 597 -HSync +Vsync
# 768x576 @ 72.00 Hz (GTF) hsync: 43.27 kHz; pclk: 42.93 MHz
ModeLine "768x576" 42.93 768 800 880 992 576 577 580 601 -HSync +Vsync
# 768x576 @ 75.00 Hz (GTF) hsync: 45.15 kHz; pclk: 45.51 MHz
ModeLine "768x576" 45.51 768 808 888 1008 576 577 580 602 -HSync +Vsync
# 768x576 @ 85.00 Hz (GTF) hsync: 51.42 kHz; pclk: 51.84 MHz
ModeLine "768x576" 51.84 768 808 888 1008 576 577 580 605 -HSync +Vsync
# 768x576 @ 100.00 Hz (GTF) hsync: 61.10 kHz; pclk: 62.57 MHz
ModeLine "768x576" 62.57 768 816 896 1024 576 577 580 611 -HSync +Vsync
# 800x600 @ 100.00 Hz (GTF) hsync: 63.60 kHz; pclk: 68.18 MHz
ModeLine "800x600" 68.18 800 848 936 1072 600 601 604 636 -HSync +Vsync
# 1024x768 @ 100.00 Hz (GTF) hsync: 81.40 kHz; pclk: 113.31 MHz
ModeLine "1024x768" 113.31 1024 1096 1208 1392 768 769 772 814 -HSync +Vsync
# 1152x864 @ 60.00 Hz (GTF) hsync: 53.70 kHz; pclk: 81.62 MHz
ModeLine "1152x864" 81.62 1152 1216 1336 1520 864 865 868 895 -HSync +Vsync
# 1152x864 @ 85.00 Hz (GTF) hsync: 77.10 kHz; pclk: 119.65 MHz
ModeLine "1152x864" 119.65 1152 1224 1352 1552 864 865 868 907 -HSync +Vsync
# 1152x864 @ 100.00 Hz (GTF) hsync: 91.50 kHz; pclk: 143.47 MHz
ModeLine "1152x864" 143.47 1152 1232 1360 1568 864 865 868 915 -HSync +Vsync
# 1280x960 @ 72.00 Hz (GTF) hsync: 72.07 kHz; pclk: 124.54 MHz
ModeLine "1280x960" 124.54 1280 1368 1504 1728 960 961 964 1001 -HSync +Vsync
# 1280x960 @ 75.00 Hz (GTF) hsync: 75.15 kHz; pclk: 129.86 MHz
ModeLine "1280x960" 129.86 1280 1368 1504 1728 960 961 964 1002 -HSync +Vsync
# 1280x960 @ 100.00 Hz (GTF) hsync: 101.70 kHz; pclk: 178.99 MHz
ModeLine "1280x960" 178.99 1280 1376 1520 1760 960 961 964 1017 -HSync +Vsync
# 1280x1024 @ 100.00 Hz (GTF) hsync: 108.50 kHz; pclk: 190.96 MHz
ModeLine "1280x1024" 190.96 1280 1376 1520 1760 1024 1025 1028 1085 -HSync +Vsync
# 1400x1050 @ 60.00 Hz (GTF) hsync: 65.22 kHz; pclk: 122.61 MHz
ModeLine "1400x1050" 122.61 1400 1488 1640 1880 1050 1051 1054 1087 -HSync +Vsync
# 1400x1050 @ 72.00 Hz (GTF) hsync: 78.77 kHz; pclk: 149.34 MHz
ModeLine "1400x1050" 149.34 1400 1496 1648 1896 1050 1051 1054 1094 -HSync +Vsync
# 1400x1050 @ 75.00 Hz (GTF) hsync: 82.20 kHz; pclk: 155.85 MHz
ModeLine "1400x1050" 155.85 1400 1496 1648 1896 1050 1051 1054 1096 -HSync +Vsync
# 1400x1050 @ 85.00 Hz (GTF) hsync: 93.76 kHz; pclk: 179.26 MHz
ModeLine "1400x1050" 179.26 1400 1504 1656 1912 1050 1051 1054 1103 -HSync +Vsync
# 1400x1050 @ 100.00 Hz (GTF) hsync: 111.20 kHz; pclk: 214.39 MHz
ModeLine "1400x1050" 214.39 1400 1512 1664 1928 1050 1051 1054 1112 -HSync +Vsync
# 1600x1200 @ 100.00 Hz (GTF) hsync: 127.10 kHz; pclk: 280.64 MHz
ModeLine "1600x1200" 280.64 1600 1728 1904 2208 1200 1201 1204 1271 -HSync +Vsync
EndSection
# Auto-generated by Archie mkxcfg
Section "Device"
Identifier "Card0"
Driver "nv"
VendorName "All"
BoardName "All"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultColorDepth 16
SubSection "Display"
Depth 1
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 32
Modes "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "DRI"
Mode 0666
EndSection

are you using "startxfce4" and "startkde"?
if so startxfce4 is smart enough to start X when you run it, starkde doesn't. so choices are, use something like GDM which starts X and presents a login inscreen which you can pick the WM to use. OR edit the .xinitrc file in your home folder and at the end of the file replace the uncommented "exec ____" (generally like windowmaker or fluxbox) with "exec startkde" or "exec openbox" then use "startx" to launch.
also
for future reference the term is windowmanager, WindowMaker is a specific windowmanager.

Why can't I start my computer?

After 4 years. Now when I try to start my Stationary Window 7, I get a error message that it can't find any operating system on my computer. So how can I make it find it and start again or do I have to move over to Linux. I have program I don't want to lose
that I work with and have no chance to re-install, becouse I can't find all the codes I paid for. Please Help Me

This is an EXCELLENT question. I finally got my Power PC running again, (since apple no longer supports PPC's AT ALL it takes longer when something goes wrong with everything out of stock), and I'm totally frustrated that I can't either put a ton of short videos in a play list and have it randomly play JUST LIKE a bunch of music. ***? how ******** is it that they didn't say "let's let music and videos play together in a play list if someone wants, the visualizer will just go blank (or play lava lamp type ****) while the musics on till the next vid in the cue..." or AT LEAST let a playlist comprised ENTIRELY of movies only play if there's some BIG ISSUE with the music/movie mix playlists, wtfe. This is just frustrating and OBVIOUS.

Why can't I start Mac after installing Windows using boot camp???

I'm new to Mac.... Have installed Windows 7 through Bootcamp... Well, I tried to at least!! I can now only get into Windows every time I start the mac up.... What have I done wrong - and how do I fix it!?!

Flying kiwis wrote:
Thanks Vinmar.... I can't see anything down on the bottom fit of my screen, apart from the time, date, connectivity, speaker volume etc. am I looking in the wrong place??
The restart in Mac OS X icon (a grey diamond) will only appear after you've installed the Boot Camp drivers. If you installed the drivers, try clicking on the sideways triangle to show any hidden system tray icons. You can also use the boot camp control panel to restart in Mac OS X.
For how many partitions you have, you should be able to see those in the Disk Utility application in Mac OS X or the Disk Management app in Windows. Be careful not to delete any of them. If you want to remove a partition, I'd use the Boot Camp Utility to do that. Nore as well that OS X 10.7 and above add a hidden recovery partition to your drive that you won't see in Disk Utility but will see in the Windows app.
Hope this helps.
Cheers,
Vinmar

Why can´t I start writing directly when I open a new pages document?

I have always been able to open a document in pages and start writing directly but now I can´t and I don´t know what happend. I must have done something wrong. Can someone help me?

Hej, Ellen från Karlskrona!
You have started a Page Layout document instead of a Word Processing document. Open the template chooser and look in the left column. There you will see the two types of documents.

TS1717 Why can I not start Itunes? I keep getting a message that it stopped working/was stopped because of DEP, and I can't get DEP off to launch itunes.

I have Itunes installed on my PC, but now I can no longer open it. If I open it, I get the same message each time: Itunes has stopped working, a problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available. As soon as I close that message by clicking on "Close Program" which is my only option, I get a second message stating that to help protect my computer, Data Execution Prevention has closed Itunes. So I read up on help section and attempted to turn off DEP for Itunes, but I get the message that I cannot turn it off for this program. I attempted to repair, uninstall, reinstall Itunes and I keep getting the same message. I also logged in as a guest on my computer as a site suggested and see if the problem exists there as well, it does, it gives me the same message. Please help!
Thanks!
N

You're welcome! Glad you got things sorted out.

Why can't I start a conversation with Firefox Hello?

When I click on the hello icon the popup shows up but then nothing happes when I click on start converstation or when I try to register or login, the buttons seem to be dead.

''philipp [[#answer-686244|said]]''
<blockquote>
could you restart firefox, and immediately afterwards open the browser console (ctrl+shift+j), then try to click on the hello > start a conversation button and see what kind of errors/log messages show up in the browser console?
then please copy those entries, paste them into a service like http://pastebin.mozilla.org/ and put the link here into the forum. thank you!
</blockquote>
Done that with a fresh profile.
https://pastebin.mozilla.org/8538771

Why can't I start the Time Machine Application?

This is the first time I tried to restore files using time machine. But there is a question mark over the Time Machine Icon. When I click on it nothing happens at all. I cannot start Time Machine. The HD was connected and I backed up some files just a few minutes ago.
Would appreciate some help.

Look in the Applications folder for the Time Machine application. If you don't find it there, then do a Spotlight search for it in case you moved it.

Why can't I start up Age of Empires lll

Similar Messages

Maybe you are looking for