Why can't I transfer files from my MacBook Pro to my external HD?

Hello,
I was transferring files from my macbook to my Buffalo HD-PNTU3 when it was accidentally removed improperly; Once I plugged it back in I could no longer transfer any files the cursor would turn into the round banning icon and wouldn't take the command.
After reading some posts in the community I tried repairing disk permissions in Disk Utility but it was in vain. Any propositions?
Thank you in advance,
Likolette

Hello Likolette,
Thanks for using Apple Support Communities.
From your post I see that you're unable to move files to your external hard drive ever since it was unplugged before being ejected.  To start troubleshooting this issue, I'd like you to please repair the disk using Disk Utility.
Disk Utility 12.x: Repair a disk
Cheers,
Alex H.

Similar Messages

  • Why can't I add files from my MacBook Pro to my external hard drive?

    I re-named my external hard drive on my PC, and now I cannot add files from my Mac to the hard drive. How can I add files again? Do I need to reformat my hard drive?

    Since you mention you used the external harddrive with your 'PC', I assume that it was NTFS formatted. By default Mac cannot write to NTFS only read it.
    To make sure: go to. Disk Utility (while the drive is mounted), select the drive and look at 'Format'. That should tell you the format type of the drive.
    If you are looking for third party solutions, try:
    http://www.macupdate.com/app/mac/24481/ntfs-3g
    http://www.paragon-software.com/home/ntfs-mac/
    However, know that they are not supported by apple and won't be the best solution. The best cross platform solution would be to reformat the drive with exFat (you can do this through disk utility), just make sure you backup your data before doing this. Both Windows and Mac can write to exFat and it does not have file size limitations as Fat32.

  • Why can't i transfer music from my Macbook Pro to my iPhone 5.

    Hey guys.
    I was wondering how i'm able to put music from the itunes on my Macbook Pro to my iPhone 5.
    when i connect the usb it says
    The iphone " insert name " cannot be used because it requires iTunes version 10.7 or later. Go to www.itunes.com to download the latest version of iTunes.
    i downloaded the latest itunes to no effect.
    any advice would be so appreciated, i just got my iphone today. music is the only thing i really want on it.
    thank you in advance.

    Hello Likolette,
    Thanks for using Apple Support Communities.
    From your post I see that you're unable to move files to your external hard drive ever since it was unplugged before being ejected.  To start troubleshooting this issue, I'd like you to please repair the disk using Disk Utility.
    Disk Utility 12.x: Repair a disk
    Cheers,
    Alex H.

  • How can I transfer files from my macbook pro to my ipad w/ retna display via my USB,  I can't get maverick or icloud to load on my macbook.

    I just bought a new ipad and would like to transfer files from my macbook pro.  I cannot get icloud to work on my Macbook.  I cannot get Maverick to load on my macbook.

    if I plug my ipad to my macbook nothing happens except it charges.  no screen prompt like I would expect.

  • How do I transfer files from a Macbook pro to an Ipad 3?

    How do I transfer files from a Macbook pro to an Ipad 3?

    You can use 3rd party apps in conjunction with Files Sharing in iTune. Different types of file need different apps.
    http://support.apple.com/kb/HT4094

  • Auto sync is not working. How can I manually transfer music from my macbook pro iTunes to iphone 5?

    Auto sync is not working. How can I manually transfer music from my macbook pro iTunes to iphone 5? My iMatch is turned on and I can direct downlad my music to the iPhone from the Cloud; however, I want to direct import All of my music from iTunes to my iPhone 5 via the connecting USB cable and it is not working. Yes, I have tried restarting both devices, and no autosync is not working nor is is it providing the avaialbile option to select music in iTunes on my Mac to then sync. Please help. Thanks

    Please disregard. I figured it out. Answer for anyone else running into this problem: You have to turn off iTunes Match on both devices. Apparently, if you activate iTunes Match it deactivates your abiltiy to direct sync.

  • Best way to transfer files from old Macbook Pro to new one?

    I just got a new Macbook Pro from Apple...YEEEEAAAHHHH! 
    So....
    What's the best way to transfer files from old Macbook Pro to new one?  I know Migration assistant, but is there a recommended way?  I don't want to put do a system restore or transfer everything from the old laptop, but I do want to move important things like photos, music, documents and such over.  Any suggestions on best way to do this?
    Another question, perhaps subquestion.  If I have, say, an older version of iPhoto but a newer version of one on my new Macbook Pro, will it still transfer photos no problem?
    Just looking for hints from the experts so this puppy is set up in the best way possible.

    Just one comment on this:
    ‘If I have, say, an older version of iPhoto but a newer version of one on my new Macbook Pro, will it still transfer photos no problem?’
    the problems are ALWAYS in the reverse way, when you have the newest (or a newer) version of a given app, and wish to transfer its library to an older version.
    Otherwise, see the link to Pondini.
    I have been using Martin Jahn’s iBackup, with which I have become accustomed and works fine. It also makes daily backups. Its advantage over other apps is that you may add whatever you wish to save, beside its default settings (which you may delete or cancel, of course, even if not recommended); it also has a friendly interface and easily customizable. Of course, this is a personal view, you may try other methods as well, or other backup apps. All are good if you are satisfied and correspond to your needs.

  • HT3263 I am trying to transfer files from my MacBook Pro (using Mac OSX 10.6.8) to MacBook Air (Mac OSX 10.7.4) using Migration Assist via WiFi connection.  The two macs cannot find each other.  any suggestions

    I am trying to transfer files from my MacBook Pro (using Mac OSX 10.6.8) to MacBook Air (Mac OSX 10.7.4) using Migration Assist via WiFi connection.  The two macs cannot find each other.  any suggestions

    Try this article - http://support.apple.com/kb/HT4889.
    If it doesn't help, post back in this thread.
    Best of luck,
    Clinton

  • Trying to copy ANY file from my MacBook Pro to an external hard drive spins for 45 minutes then fails. I hate this computer and WISH I never would have wasted my money. Any ideas? WD My Passport 2TB Drive, had to buy a program to make the POS write

    Trying to copy ANY file from my MacBook Pro to an external hard drive spins for 45 minutes then fails. I hate this computer and WISH I never would have wasted my money. Any ideas? WD My Passport 2TB Drive, had to buy a program to make the POS read files. Copies that would take seconds from a Windows based machine never complete. I have to close the transfer or shut off the machine half the time. Worst computer I have EVER owned, crashes non-stop, constantly freezes, and seems like EVERY operation is more complicated with this thing. Literally, my 1997 Compaq was FAR MORE reliable and user friendly.

    This is one of the messages I keep getting; The Finder can’t complete the operation because some data in -- File Whatever -- can’t be read or written.(Error code -36)
    I have copied things to the hard drive in the past, but it has always been incredibly slow, and now just seems to freeze and fail

  • I am unable to copy files from my macbook pro to my external hard disk.

    I am unable to copy files from my macbook pro to my external hard disk. I tried to copy a movie 800mb in size to my EDD and  it shows the loading box and it says zero kb loaded out of 800mb and sometimes it loads a a few kb of the file, then after a while it ejects my hard disk and gives a message saying you should have ejected it properly. and it sometimes gives this message
    "The Finder can’t complete the operation because some data in “....” can’t be read or written.
    (Error code -36)".
    This happens with a range of files if they are more than a few mb in size, so I am pretty sure its not the file problem. It also occurs sometimes when i try to copy from my EDD to my mac.
    I have tried everything. I formatted my EDD to MS-DOS (FAT) format because i need to use it with mac and windows. I tried resetting The SMC and the PRAM and NVRAM. I tried verify and disk repair on disk utility. But the same thing happens over again and it is really frustrating. The problem doesnt happen with my PC.
    My EDD is an  Apollo 320GB hard drive from Imation.
    Also are there any particular EDD brands that may not have this issue with MACs and can be used on mac and PC?
    Thanks in advance!

    Hey guys,
    So this is follow up from my debarkle with the EDD. I found out my problem with copying files from Mac to EDD and vice versa was a result of a not so good EDD ( i had an apollo hard drive from imation) that was not very compatible with macs. So i did my research and found out that the best hard drives were Western Digital and Seagate. I bought the newest western digital EDD 1TB and formated it to FAT32 and guess what...no problems so far. The only problem is that FAT32 format doesn't copy files larger than about 4 gigs so i couldnt copy a movie from my brothers computer onto my EDD that was 1080p. You could probably resolve that by partitioning a small part of your hard drive in ExFAT? but yeah, hopefully that helped guys.
    Aaisha

  • I am trying to transfer files from my MacBook Pro to my iMac using migration Assstance and they cannot find one another.  My MacBook Pro uses Migration Assistance 1.0.6 and my new iMac uses 10.5.3.  What can I do to allow sharing?

    How does one transfer Files from an old MacBook Pro to a new iMac?

    10.5.3 is at least part of the problem.  You need to apply the latest updates to that mac.
    See How do I set up a new Mac from an old one, its backups, or a PC?  Select the appropriate link and follow the instructions carefully.

  • Why can't I upload photos from my Macbook pro to my iphone 5

    I can't find a way to upload photos from my Macbook pro to my iphone 5

    You sync them via iTunes.  Read the manual

  • Why won't my keynote files from my MacBook pro show up on my iPad 2 via iCloud?

    Hey anyone who can offer assistance,
    I recently upgraded my MacBook pro early 2011 from snow leopard to mountain lion in order to utilize iCloud and am experiencing an issue syncing presentations from my MacBook to my iPad 2.  The presentations simply don't show up on my iPad. I have gone through all the normal steps of making sure that iCloud is turned on on both the devices as well as confirming the documents and data tab is switched on in iCloud on both devices.  I then drag and drop presentations into the iCloud folder (within keynote) on my MacBook pro and keynote confirms it has been uploaded to iCloud.  Then when I open keynote on my iPad it is not there.  I am connected to the internet on both devices as well.  Thanks for any help you can offer.

    I am a doofus. All I needed to do was go into settings, click on keynote and turn iCloud on in keynote.

  • Why can't I transfer files from usb internal hdd on my mac?

    I am trying to restore a back-up (not via time-machine) from an external HDD dock, I've put an internal HDD in there.
    I'm constantley confronted with this error: "The finder can’t complete the operation because some data in "8A5A0887.MOV" can’t be read or written. (Error code -36)".
    I've tried to check the do not read/write radio button, but it's not even on. I'm afraid my disk is broken but I need those files really bad. Any ideas on transfering the files from the HDD?

    looks like the file is corrupt

  • How can I transfer files from my macbook pro hard drive to another target drive

    The hard drive on my Macbook is corrupted and so I am trying back up files from the hard drive on my Macbook to a target disc so that I can wipe the hard drive on my Macbook and re-install the system software. I am only able to access the Macbook via disc utilities using the start up system DVD. Is there a way of accessing the files while I'm in disc utilities so that I can transfer to the target disc?

    Some MacBooks have Firewire, while others do not.  See this tip:
    https://discussions.apple.com/docs/DOC-2502
    If both of yours have Firewire, you can use the Target Disk mode described at the end of the tip.  Otherwise, you'll need to pull the hard drive out of the machine that it is in, and put it in a 2.5" hard drive case that supports the ports that are on the other machine.
    Note, if you can't read the data on the other machine, using a data recovery tool to a hard drive at least as large with no data on it is recommended.  This tip explains how to do data recovery:
    https://discussions.apple.com/docs/DOC-1689

Maybe you are looking for

  • Is there a way to create a file merge that updates from the original source file if changes are made?

    I have thousands of PDF documents that are merged with other files. I'll give an example so it's easier to understand. File #1 may be merged (or in a portfolio) with Files #2 and #3 but also in another merge (or portfolio) with Files #3 and #4. If I

  • Photoshop on Windows or Mac? What system is better?

    Hi I'm thinking on buying new laptop mostly to create stuff in Photoshop, sometimes After Effects videos and to update my community blog [link removed by moderator] My friend is saying that I should buy Mac Book because it will work better and faster

  • Using AI Sample Clock to Trigger Counter Samples

    My basic question is:  Is the ai\SampleClock signal only active while an analog input task is running? The details are: I have an X-series PCIe-6321 multifunction DAQ card.  It is controlling a SCXI chassis and has a SCXI-1180 and SCXI-1302 so I can

  • Query giving wrong results

    Below is the query thats giving me wrong results ...can anyone help me figure where i am going wrong :( SQL> select count(*) from t where source='LP1.1';   COUNT(*)         69 SQL> select count(*) from tblspring where line_a='LP1.1';   COUNT(*)      

  • Pass word for airport

    i can not remember my password for my wifi