Why can't I use 'Control and Arrow' to zoom with Leopard?

Hi guys,
I've lost the ability to quick track zoom since installing Leopard. When I press Control and one of the four vertical or horizontal arrows, the Spaces icon shows and shoves my Logic out of the way.
I hope that there's some way to disable this function so it will enable me to use my beloved Zoom again.
Please help!!!

3-D is very memory intensive.
System requirements | Photoshop
Mac OS
Multicore Intel processor with 64-bit support
Mac OS X v10.7, v10.8, or v10.9
2 GB of RAM (8 GB recommended)
3.2 GB of available hard-disk space for installation; additional free space required during installation (cannot install on a volume that uses a case-sensitive file system or on removable flash storage devices)
1024x768 display (1280x800 recommended) with 16-bit color and 512 MB of VRAM (1 GB recommended)**
OpenGL 2.0–capable system
Internet connection and registration are necessary for required software activation, membership validation, and access to online services.*
** 3D features are disabled and some Mercury Graphics Engine enhanced features may not work with less than 512 MB VRAM. Read the Help article.
Bottom line, you don't have enough VRAM
Nancy O.

Similar Messages

Why can't I use my mid 2010 macbook pro with 8GB memoir and NVIDIA GEForce GT 330M 256MB to run 3D in photoshop CC?

Why can't I use my mid 2010 macbook pro with 8GB memoir and NVIDIA GEForce GT 330M 256MB to run 3D in photoshop CC?

3-D is very memory intensive.
System requirements | Photoshop
Mac OS
Multicore Intel processor with 64-bit support
Mac OS X v10.7, v10.8, or v10.9
2 GB of RAM (8 GB recommended)
3.2 GB of available hard-disk space for installation; additional free space required during installation (cannot install on a volume that uses a case-sensitive file system or on removable flash storage devices)
1024x768 display (1280x800 recommended) with 16-bit color and 512 MB of VRAM (1 GB recommended)**
OpenGL 2.0–capable system
Internet connection and registration are necessary for required software activation, membership validation, and access to online services.*
** 3D features are disabled and some Mercury Graphics Engine enhanced features may not work with less than 512 MB VRAM. Read the Help article.
Bottom line, you don't have enough VRAM
Nancy O.

Why can't I use iMessage and Facetime on my iPhone4(iso5.1.1)?

Why can't I use iMessage and Facetime on my iPhone4（iso5.1.1）？

in settings where you have them turned on, does it say waiting for activation ?

Why Can't I use the trial version of AE with Mavericks?

Why Can't I use the trial version of AE with Mavericks?

You will be able to do so when we release the After Effects CC (12.1) update very soon:
http://adobe.ly/AE_CC_12dot1_details
The After Effects CC (12.0.1) patch for Mac OS X v10.9 (Mavericks) is a very focused update that is just meant to get subscribers through the few days between Mavericks being released and the full After Effects CC (12.1) update being released:
http://adobe.ly/AE_CC_1201_Mavericks

Why can't I use face time on iPad 2 with 3g iOS 6.0.1

why can't I use face time on ipad2 with 3g and ios 6.0.1

Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
Using FaceTime and iMessage behind a firewall
http://support.apple.com/kb/HT4245
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
Unable to use FaceTime and iMessage with my apple ID
https://discussions.apple.com/thread/4649373?tstart=90
 Cheers, Tom

Can I run hardware test and repair a disk with Leopard using 10.3 DVD

Hi,
I'm trying to decide whether to partition and clone Leopard to my external or partition and install Tiger on the external.
My iMac came with 10.3.6 install and hardware test DVD's and they (Comp USA) gave me a Tiger drop-in DVD. I upgraded to Leopard through a family pack DVD (when I told my friend I would by one of the install's I thought I would get a DVD, but you only get an install license, oh well). By the way, Leopard runs great in my rev A iMac G5.
I'm trying to figure out which os to use on the external as a safe-boot incase something happens. If I clone Leopard onto a partition for backup/boot, can I still use the Disc Repair (not permissions) and Hardware Test from the 10.3 or Tiger DVD's to maintain that permission should something bad happen? The way I see it, i'll be able to repair permissions on both the main and external drives using Leopard's disc utility, but I'm not sure if I can repair a Leopard disk or do Hardware Test on that disc using an earlier version of OSX install/Hardware Test DVD's.
Will earlier versions of OSX repair a Leopard disk and be able run Hardware Test?
Thanks for the help,
LowBb
Message was edited by: LowBb

Yes, that seems to be the case, but I didn't do good enough research when he asked if I wanted a license for Leopard. For some reason, I had it in my mind that a Family pack came with multi DVD's for people. Maybe that's why he sold me a license so cheap. I thought I was getting a bargin, you get what you pay for.
So, I have the hardware test DVD's that came with the iMac and the Tiger drop-in is just an upgrade with no Hardware Test, you are correct.
But: (let me make sure I have this right) I should not use the 10.3 DVD's or the Tiger drop-in to repair a disc (not permissions) on a hard drive running Leopard. Is this what you are saying? I kind of thought this would be the case. If it is, I'm going to install MY stuff that I have the DVD's for on the external as an emergency boot disc.

Why can't I use command+alt+arrows to switch between tabs correctly anymore?

I used to be able to use the method of command+alt+left or right arrows to switch between tabs. For example: I could be playing an online game, and be clicking things inside of the box on the screen that the game was on, use the method, and easily switch to another tab. Now, however, it doesn't let me switch between tabs unless i click outside of the game area.

Don't forget that there are many "pieces" to internet access that must all be set to make manual IP selection work, namely:
1) Your IP address
2) The addresses of your DNS servers
3) The default route via which packets leave your network ("router" in Network->TCP/IP)
4) Your subnet mask
As mentioned above you also need to assign an address from outside the DHCP pool that is on the same subnet, as at least some routers will refuse to route traffic that seems to originate from IP addresses that fall within the DHCP pool over which it has control if it did not yet assign that IP address to a client.

Why can't i use wifi and bluetooth at the same time?

I recently bought a Philips docking speaker that has bluetooth connectivity for streaming music wirelessly from my Ipod Touch. The bluetooth/speaker works great, but, my Touch won't allow me to be online AND use the bluetooth at the same time. This is really annoying when you want to listen to music and check your emails. Am I doing something wrong?? Any help would be gratefully received.

I can use by BT headphones while my iPod is connected to the internet via wifi with no problems. I am uncertain how the Philips' system works. Does it have its own BT transmitter/receiver or doe it use the iPods to stream to its speaker?

Why can't I use 'control-S' in dashboard?

I've always liked the 'control-S' function, where you select a word or paragraph and Mac reads it aloud.
However there seems to be a malfunction ever since I'm using Mac OS Lion.
In dashboard > dictionary, whatever I select there's no voiceover.
It happens only in Dashboard. Dictionary in desktop speaks fine.
Once in a blue moon it works, but most of the time it just doesn't.
Please help, it's hyper irritating.

Welcome to the Apple Discussions. You should be able to add edited photos from iPhoto to an iWeb page. How are you adding them and to what type of page?
OT

Why can't I use SIRI and dictation on my iPad2 with release 6.1?

Why is SIRI and dictation not available on Ipad2? I have the latest release of IOS 6.1.

Siri requires at least an iPad 3.
Here's an explanation of what features require which hardware.
iOS 6: Which software features does my iPhone, iPad, or iPod touch support?

WHY---------???? WHY can't I use my bluetooth for voice commands with the driods?

I purchased a droid1 and found out very quickly that my bluetooth COULD NOT BE USED WITH THE DROID OR VOICE COMMANDS-----IT IS NOT A HANDS FREE DEVICE!! I paired my bluetoot with the droid and expected to make calls as I did with my OLDER phone but NOPE-----IT WILL NOT WORK-------YOU HAVE TO "TOUCH" THE DROID TO MAKE A CALL BEFORE YOU CAN TALK VIA BLUETOOTH! WHAT ARE THESE PEOPLE THINKING? A basic function (AND LEGAL) like voice command calling wasn't put into these driods? PLeaase..........what--why-----how-----could they overlook such a basic and legal requirement (MOST STATS REQUIRE HANDS FREE OPERATION)..............I'm baffled and extremely disappointed because I can not use any of these 'smartphones'=droids.
Be very careful before you buy one without being informed of this flaw--------the DROIDS are not HANDS FREE DEVICES--------sadly.

I had the same shock when purchasing 2 new Droids less than a month ago. The store rep emphatically told me that Bluetooth dialing worked but of course that was wrong. The Froyo 2.2 version corrects that -- if you haven't received an update notice from Verizon you can get it here: http://www.droid-life.com/2010/08/03/manual-android-2-2-update-for-motorola-droid/ and do it yourself. it's pretty simple.

Why can't I navigate back and forth in iTunes with gestures anymore?

In leopard, with any app that has a back/forward navigation available (iTunes, AppStore), you could swipe three fingers to move back and forth. Now, in Lion, you can only swipe back/forward in safari (default is two fingers, which is fine with me)... What gives? Is there a way to turn this feature back on?
It's kind of annoying that one has to click the little [<][>] buttons to move back and forth anymore instead of swiping. With all these improvements, why remove the ones that worked before?
I still enjoy my Lion, however.

In something that I've chosen to file under "how messed up is this?", iTunes Store seems to support 3 finger swiping to move forwards and backwards and two finger scrolling in all directions. iTunes itself also supports two finger scrolling in all directions and three finger swiping to go backwards, but not forwards - if it helps I've attached my trackpad settings
There's one particular finger gesture I'd like to make at Apple for releasing this half thought-through operating system on the general public...(and after the confusing time I just had trying to navigate "Duplicate" and "Save a version" and other such nonsense when using Preview to convert the screenshot Grab just gave me, I'll double that Gesture)

Why can I not use Premiere Elements 12 on PC with Windows 8.1 when the vidio is done with the same software on a PC with Windows 7?

I have made a Video on one PC with Premiere Emements 12 and want to continue on a PC with the same Premiere Elements 12 on and Windows 8.1. The systen wants other Codec.
What can I do?
By the way with Magix is it possible to work on both PC.

Vaihingen
How did you go about transferring the Premiere Elements 12 project on Windows 7 64 bit to Premiere Elements 12 on Windows 8.1 64 bit.
Therein is what I believe is your problem. You in all likelihood do not have a codec problem of any kind, rather Premiere Elements 12 project on Windows 8.1 64 bit with disconnect between it source media and the project file. Here is how it goes.
When you import a file into Premiere Elements project, what you have in Premiere Elements is a copy of the original which is still at its hard drive save location. But the project must trace back to that original on its hard drive save location.
You may have the project.prel (project file) opening in Premiere Elements 12 on the second computer, but what I suspect to be the case is that you do not have the project media on that second computer.
If so....On the first computer, archive the project with File Menu/Project Archiver and its Copy Project option. Transfer the resulting saved Copied Folder to a USB Flash Drive which will be used to transfer the Copied Folder to the second computer. In the second computer, open the Copied Folder, right click the project.prel file in the Copied Folder, select Open With, and then Premiere Elements 12.
Did you set up disc menu in the Premiere Elements 12 Windows 7 64 bit project?
Please review and consider the above and let us know if any or all of that applies to your situation.
Thank you.
ATR

Why can't i use my flagged pictures in sreensaver with mountain lion

in the previous OS i was able to sellect my flagged pics in iphoto to use in my screensaver also it would put a diffrent pic on my two screens. Now with mountain lion i can't figure out how to do either of these things. Has anyone elce had this issue?

Apple appears to have significantly changed the Screen Savers tab in System Preferences. I was able to select the Flagged smart album (or any other iPhoto album for that matter) by selecting the type of slideshow (from the 'Slideshow' section). Then selected the "Source" popup menu box, selected "iPhoto Library..." then selected the Flagged (or whatever iPhoto album/event you want). Then select the "Choose" button and you are done.

Hi, why can't I use my old e-print address with my new printer?cc=NL

I have a newer photosmart 5510 model and had to install it again. But when I tried to connect to the eprint centre it only worked when I removed my old printer. But than I couldn't use the emailaddress because I got the message it already existed... How do I change this? I used the same login.

Hi,
My suggestion: change the old one to a different one then try again. Or you can do using this order:
1. Add a new printer (now you have 2),
2. Remove the old printer, (now only new one)
3. And then Change the new printer to the old email address.
Hope this helps.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Why can't I use 'Control and Arrow' to zoom with Leopard?

Similar Messages

Maybe you are looking for