Why can't i use wifi and bluetooth at the same time?

I recently bought a Philips docking speaker that has bluetooth connectivity for streaming music wirelessly from my Ipod Touch. The bluetooth/speaker works great, but, my Touch won't allow me to be online AND use the bluetooth at the same time. This is really annoying when you want to listen to music and check your emails. Am I doing something wrong?? Any  help would be gratefully received.

I can use by BT headphones while my iPod is connected to the internet via wifi with no problems. I am uncertain how the Philips' system works.  Does it have its own BT transmitter/receiver or doe it use the iPods to stream to its speaker?

Similar Messages

  • Can my ipad use wifi and bluetooth at the same time?

    Hi
    I can stream radio via wifi radio apps and play through earphones. I can connect to my bluetooth speaker and play music stored on my ipad ok.
    When I connect up to my bluetooth speaker and try to stream the radio app it plays for a couple of seconds then stops for 20 seconds then plays for 2 seconds and carries on start, stop, start (I guess it's buffering or something?).
    Is it not possible to listen to a radio app and stream it to a bluetooth speaker at the same time?
    Any suggestions welcome

    Thanks for confirming it should work man.
    A quick check of the talktalk forum and it's my talktalk D-link 2780 router. It's a known problem.
    It all works ok on next doors router so Off to PC World for a decent router.
    Thanks again.

  • Using wifi and bluetooth at the same time

    Hello,
    I have a MacBook Pro bought in 2014 and since the latest updates of OS X (10.10.2) I very often face a drop on wifi efficiency when bluetooth is as well enable on the laptop. Even worse, it sometimes becomes completely frozen; as soon as I disable bluetooth it becomes again ok.
    One of the biggest consequences is to choice in between using Mac mouse or wifi
    Does somebody face same issue ?
    Thanks

    Hi UnoDosTres, welcome to the HP Forums. I understand that you are looking for a link to a page you once found with miscellaneous drivers. Also you are getting a keyboard delay when typing.
    I have no idea where this link you are looking would be, but I can possibly provide a link to your products driver page. To obtain this information, and keyboard troubleshooting steps, I need more information about your system.
    What is the model or product number? What version of Windows is installed?
    Guide to finding your product number
    Which Windows operating system am I running?
    TwoPointOh
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • I have an iPad 2 (wifi 3G). Is it correct to use wifi and 3G at the same time ? Or one at time depending on connectivity? Thanks.

    I have an iPad 2 (Wifi + 3G). Is it correct to use the Wifi and 3G at the same time, or one at a time, depending on connectivity? Thanks in advance.

    Your iPad will use wifi first if available. If wifi is not available, it will use 3G.
     Cheers, Tom

  • Streaming wifi and bluetooth at the same time is it possible in air play from iPod

    Streaming bluetooth and wifi at the same. Is it possible?

    You are not able to send the music to two different streams, you can use the bluetooth and wireless at the same time but for different tasks.
    The best way I have seen for what you are attempting, is to buy a wired splitter and two bluetooth transmitters, and have each transmitter broadcast bluetooth sound to the two different locations.
    I have not found any other way except when using itunes on a desktop computer which allows the selection of multiple output destinations.

  • Why can't I run Safari and Skype at the same time without making my computer freeze up?

    I can't believe I can't run Safari and Skype at the same time without my computer freezing up, it's a MacBook Pro with Mac OS 10.6.8 and it has an Intel Core 2 Duo CPU with 2.2 Ghz and 2 Gb of RAM. Is this a hardware problem or a software problem?

    I haven't gone to the trouble of actually testing to see which uses more CPU power, but Firefox has been faster than Safari on every Mac I've ever owned.
    To see CPU usage by process, open the terminal (in Utilities) and enter 'top' at the command line. You might have to expand the window as processes don't appear in any logical order.
    It could also be hardware-related: I have late 2009 mini with similar specs and it pinwheels easily.

  • Use wifi and 3g in the same time

    Hi all,
    i've bought a car device through which i can send music from my iphone/ipad via airplay.
    The problem is that once i activate wifi and connect to the car-device wireless network my iphone try to use that network for all the other tcp/ip sessions ( email, whatsapp, imessage, etc )...and it doesn't work because the device is not connected to internet.
    I'm looking for a workaround for use both connection (wifi for airplay and 3g for all the others protocols)
    Multipath TCP seems to be implemented only for SIRI at the moment.
    Thanks in advance
    L

    this afternoon i'll check this workaround.
    https://discussions.apple.com/thread/3703817?start=0&tstart=0
    i'm not sure it works...but i'm not sure that no solutions exists.
    Why you're so sure ?

  • Using WiFi and 3G at the same time

    If I am hooked up to wi-fi, but my cell/3G connection is still active, is there a way to ensure that I'm maximizing my wi-fi use and minimizing depletion of my data plan?
    Comment edited to start new discussion.
    Message was edited by: Admin Moderator

    Duplicate post - please see:
    https://community.verizonwireless.com/message/1051215#1051215
    Message was edited by: Admin Moderator

  • My Ipad mini does not see my printer. my wife's ipad2 does. We both use IOS8 and upgraded at the same time. How can I remedy this?

    My Ipad mini does not see my printer. my wife's ipad2 does. We both use IOS8 and upgraded at the same time. How can I remedy this?

    OK great info!
    I found 2 possible ethernet to USB adapters:
    By "Plugable":  USB 2.0 to ethernet LAN wired network adapter - seems this will work, but I'll contact Plugable.
    2. Apple USB Ethernet Adapter
    Easily connect your MacBook Air computer to an Ethernet network with the Apple USB Ethernet Adapter. Small and light, it connects to the USB 2.0 port of your MacBook Air and provides an RJ-45 connector that supports 10/100BASE-T performance.  BUT NOT SURE IF THIS WILL WORK ON ANYTHING BUT a MacBook Air…
    One person commented: 
    This little gem used to be the device of choice for adding a second Ethernet interface to a Mac Mini Server and I'd been using one that way for about a year. After doing a software update to 10.6.6 it stopped working. Forewarned is forearmed – it appears that Apple is finally enforcing the MacBook Air system requirement.
    Thanks for any additional comments.
    Best regards,
    Steve Schulte
    Sunday 6 January 2013

  • Can we use exceptions and conditions at the same time?

    can we use exceptions and conditions at the same time? Are there any dependencies between exceptions an conditions?

    Exceptions are used when there are some mistakes , or exceeds the supposed values, we can highligt that in different colours for enabling the validator to notice easily. In this we are giving conditions for considering the value as exceptions. suppose, if the values is out of the range -1 to +1 then exception.
    But conditions can be considered as the restrictions given in measure level also. So please elaborate what you meant by conditions

  • Using Wifi and Cellular/LTE at same time

    Does using Wifi and Cellular/LTE at same time cause more battery drain then just using one of them at a time?
    Just on wifi, I get 6 hours and 43 minutes of usage and 1 day on standby. Is that considered good?

    When you are playing online game, most of your Bandwidth is consumed by Xbox. May because of this you are not able to access the net on your PC. What you could is, Disable the firewall on that PC, login to the setup page for this route and enable QoS on it, under “ Gaming and Application” Tab. And set higher priority for the IP address of your PC.

  • I cannot use data and voice at the same time.

    I cannot use data and voice at the same time.
    I am on Wifi (connected) and at the same time I am on a voice call. when I switch to my RSS feed reader it does not sync it comes out with a message cannot connect to internet, I thought it is a problem with the feed reader application, IE 10 behaves the same I cannot browse when I am on a voice call.
    This is a very basic issue, am I missing something? Please help.
    My Model is lumia 820 with the latest portico update.
    TIA
    Sandeep

    I am aware that packet data via EDGE and voice cannot happen at the same time, surprisingly when I am on voice call I cannot connect to internet via Wifi too

  • IPad turn on wifi and 3G at the same time

    If my iPad turn on the wifi and 3G at the same time, which data will my device use? The wifi or the 3G?

    Ie.. At home if your in settings, wifi, connected to your home wifi....3G will not be used. As soon as you leave your house(car etc) 3G takes over until your connected to another wifi hotspot. To keep your data usage down, turn off 3G when you don't want to use it, or limit use by checking for wifi if your going to be in a location for a while.

  • HT5569 How do I print using a wireless printer when I'm using wifi for Internet at the same time

    I can't figure out how to print via wifi when I'm using wifi for Internet at the same time please help

    You need to have your printer & ipad connected to the same wifi router.  ( This would be my best guess. )
    Robert

  • My SB Audigy 2 card can't use headset and musicamplifier at the same time

    Hi, i just bought a SB Audigy 2 [D400] and i have downloaded drivers and programs. I run Windows XP SP2.
    The soundcard works fine but it is very very annoying that i physically have to change the jack in the green=line out jack from headset to musicamplifier when i want to use my musicamplifier and change back the jack in the green=line out from musicamplifier to headset when i just want to use the headset/headphones .
    In the shop they told my that i can connect both amplifier and headset at the same time and then with creative software control whether there is sound in the headset or in the amplifier. But i can't simple get it work.
    I tried to use the green to the amplifier and the headset/speakers in the black (line out 2) and then with creative speaker settings softeware choose headphones but still the ampliefier receive the sound and no sound in the headphones. Why? In fact no matter what configuration i try the headphones doesn't work.
    But if i change the jacks so headset is in the green line out then only headset is working and the amplifier doesn't work no matter i put it in sort=line out 2 jack or orange=line out 3 jack.
    Can somebody here tell me if it is possible or not to connect both headset and external amplifier and control by software which to play? and how?
    please help, thx.
    Michael

    If you can have an ASIO compatible music playing system, then it might be possible to have system like you wish when using Creative Audigy 2 card. Since ASIO bypasses Windows Audio System, you can use both 'drivers' (ASIO - WDM/MME/DS) side by side.
    Say you want to play a game (using headset /w mic) and someone other like to listen music at the same time. With ASIO capable system you can output your music for example to "center L/R (stereo) channels" and same time output sounds from other source (using MME/DS/WDM drivers) to normal output channel (Front L/R). Only thing is, you need to set your speakersystem to 4 or 6 (depending which other channel you're using) (and for better 'balance' to adjust "angle" on THX console. You get the THX console by installing Audigy 2 Zs software).
    Try for example http://img332.imageshack.us/img332/463/djs9mo.jpg[/img] width="406" alt="Image Hosted by ImageShack.us" >
    Another option:
    Say you want to play music through external amplifier and play game online with your headset + microphone (eg. others but you listen the music, you play games)
    --> try free http://img332.imageshack.us/img332/4589/tbp7rz.jpg[/img] width="406" alt="Image Hosted by ImageShack.us" >
    If you use ASIO on BeatPort Player you can select L/R individually from the list(s). Same rules as described earlier.
    = You can play from 2 different sources simultaoneusly (ASIO + WDM/MME/DS) to two different outputs without disturbance. The other (WDM/MME/DS) source is set 'automatically' output to (Audigy) "green" port, and the other (ASIO) to "black" or "orange" port (as set).
    .jtpMessage Edited by jutapa on 09-5-2005 05:30 AM

Maybe you are looking for

  • Possibility of launch of  a sub query in a query

    Hi developers, I have an urgent problem! I have created a query to calculate with a formula an indicator but if I effectue a drill down for customer I have a correct result while when I drill down for country the rows compact the value and the result

  • Computer crashed-all info lost. Re-installed iTunes,

    Computer crashed and had to re-install everything. I did not make a backup disc of the iTunes library, which contained alot of uploaded CD's, that we no longer have. In order to sync new music we would have to competely erase the ipod content and wil

  • Create new database in XE via GUI console

    I would liek to know if it possible to create a new database in Oracle 10g Express Edition via the GUI Web console other than the existing XE database? If not, is there another way via SQL?

  • Write data on Next Month

    Hello, I'm trying to get the next month's value from a variable named &V_FIRST_FORECAST. So, let's say if my first forecast is "Oct", I want a function to return the next month "Nov" and write on it. And also I want it to be dynamic if I want to writ

  • X11vnc: cannot use host name in Windows

    Hi, i cannot find my host name if i start x11vnc. It works if i write on Windows XP "Real VNC Viewer" IP adress. When i start x11vnc The VNC desktop is: asus:0 But if i write to Real VNC Viewer "asus" or "asus:5900", it doesn't work but if i write "1