Why can't I use wifi on my time capsule after putting in a static ip address

We were assigned a static ip address, but when I enter it in the time capsule, wifi stops working. What's going on?

So do any computers get internet now?
Where have you put the static IP.. ? Please post a few screenshots. If this is your public IP just xxx out the last few digits.
Is the DNS and gateway actually correct and working?
Is this a fibre service? You still haven't answered the fundamentals..
The TC will have issues with any setup where the gateway address (what Apple call router) and the IP address are not in the correct subnet. This is a problem that often happens with fibre. Other OS like your computers are not affected, so when plugged in directly work fine.. but the TC is strict.. it must have the network correct or won't work.

Similar Messages

  • Why can't i use wifi on my iphone 4s after i downloaded IOS7

    why can't i use wifi on my iphone 4s after i downloaded IOS7?
    thankful for answer!

    Well, there are probably dozens of possible answers based on the nature of the problem, so a little more information would be useful.
    Is the WiFi switch greyed out? If so, see: http://support.apple.com/kb/TS1559
    Is the problem with only one network? If so, reboot the router by removing all power from it for about 30 seconds. Even if other devices still work on that router (the router and iPhone may have gotten out of sync on the time remaining on the iPhone's IP address lease).
    If the WiFi switch is not greyed out, but the phone doesn't find any networks, go to Settings/General/Reset - Reset network settings.
    If that fails, go to Settings/General/Reset - Reset All settings.
    And if the problem is not described in this message please provide more information.

  • Why can't I use wifi when the LTE is active?

    Why can't I use wifi when LTE is active?

    did you turn wi fi on in settings?

  • I have used Airport Time Capsule with my iMac for several years. I recently purchased a MacBook Air and when it tried to backup to Time Capsule it couldn't because Time Capsule is full. How can I now use the 3TB Airport Time Capsule to back up both?

    I have used Airport Time Capsule with my iMac for a couple years. I recently purchased a MacBook Air and when it tried to backup to Time Capsule it couldn't because Time Capsule is full. How can I now use the 3TB Airport Time Capsule to back up both the iMac and MacBook Air? I don't mind losing earlier backups. I have excluded some items from backing up, but since the Airport Time Capsule is full, I can't even begin to back up the MacBook Air.

    On your Mac.......
    Open Finder > Applications > Utilities > AirPort Utility
    Click on the Time Capsule icon, then click Edit in the smaller window that appears
    Click on the Disks tab at the top of the window
    Click Erase Disk
    On the next window that appears, select the Quick Erase option, then click Erase
    The operation will only take a few minutes.
    Now you are ready to start new backups of both Macs.  Back up one Mac first, then back up the other.  Do not try to back up both Macs as the same time.

  • Why can I not view photos from my Time Capsule on Apple TV?

    All of my media files are on my Time Capsule and I have no difficulty watching movies or listening to music through Apple TV.  I am however, not able to view any photos from my Time Capsule in Apple TV.  If I select a Time Capsule folder either part of my iTunes media files or not, I just receive a message on screen with Apple TV to say that it is loading from my library and this can message does not change, even after 24 hrs.
    Having looked on the Apple support pages they tell me that I can do what I am trying to do, but for some reason I am only able to see photos in Apple TV that are in folders on my MacBook and not my Time Capsule.\
    A solution would be extremely welcome?

    If you are using Safari then you can't as Safari doesn't support the uploading of content, but there are a number of Facebook apps which you should be able to use to upload photos e.g. the 'official' Facebook app

  • So you CAN or CANNOT use external drive with Time Capsule...

    I was posting earlier and was told you CAN'T plug an external HDD into a Time Capsule and have it be recognized (some said you had to plug it into a USB hug first.) 
    Then I find this  - http://www.brighthub.com/computing/mac-platform/articles/48709.aspx
    Then before posting this I find others that say you CAN.  So what's the deal?  Can I or can I not plug in a USB  external HDD and have access to it?

    The link that you posted is a bit out of date, but the information in the article is correct.
    You can connect an external USB drive to a Time Capsule (or AirPort Extreme) if the following conditions are met:
    The drive is formatted in Mac OS Extended (Journaled). Most store bought drives are pre-formatted for Windows in a format called NTFS which will not work the Time Capsule. You have to use Disk Utility on your Mac to re-format the drive to work correctly with the Time Capsule.
    Use a powered USB hub as the USB port on the Time Capsule is a bit under powered and it will not supply enough current for some drives. As a general rule....use a powered USB hub....even if the hard drive has its own power supply.
    At times, I have had 3 drives from differerent manufactures all hooked up simultaneously into a powered USB hub which in turns connects to the USB port on the Time Capsule. No problems at all.
    There are never any guarantees, but if you follow the guidelines, chances are good that your drive will work just fine.

  • HT4259 Can I not use this Apple Airport Time Capsule with my Netgear AC router to for a mesh basic service set?

    I just purchased a 2 TB Airport Time Capsule...I guess I to excited to fully look into things
    my intent was to simply provide good internets to my downstairs and hopefully out to the garage. The plan was to Buy this Airport TC and form up a MBSS (Mesh Basic Service Set) which is basicaly and Extended Service Set..but without the wires.
    I see guides to do it, however I see no guide including an Apple product communicating with another brand...
    any help would be appriciated
    I currently have a NETGEAR R6200 AC router upstairs in my office, I seem

    Apple uses proprietary settings that are designed to only allow other Apple devices to connect to "extend" a network wirelessly.
    Occasionally, we do see a post from a user who claims to have beat the system, but unfortunately it never seems to provide any details on exactly how this was accomplished.
    If you find a way, please let us know.

  • Why can't i use wifi and bluetooth at the same time?

    I recently bought a Philips docking speaker that has bluetooth connectivity for streaming music wirelessly from my Ipod Touch. The bluetooth/speaker works great, but, my Touch won't allow me to be online AND use the bluetooth at the same time. This is really annoying when you want to listen to music and check your emails. Am I doing something wrong?? Any  help would be gratefully received.

    I can use by BT headphones while my iPod is connected to the internet via wifi with no problems. I am uncertain how the Philips' system works.  Does it have its own BT transmitter/receiver or doe it use the iPods to stream to its speaker?

  • Why can't I use old Airport Express this week after power outage?

    After purchasing a new Airport Express station, my older one was also able to work (the older is Model A1084). It connected "under" the tree of the new Express in the new Airport Utility (under OS 10.10.1 Yosemite).  I could see the same hierarchy on my iMac and iPhone with the Airport Utility.  More importantly, I could stream music to speakers connected to the older Express Station.
    But after a power outage last night, I had to turn off all devices.  The Wi-fi network is up and running EXCEPT for the older Airport Express.  When I try to connect it I get the message "The Airport Express named (Name) cannot be set up by this software.  Go to apple.com/support/airport for more informat
    1. Is is possible to get the older version of the Utility software installed so I can set up this older device?
    2. If it worked two days ago, why would it stop with the power outage?
    Thank you!

    1. Is is possible to get the older version of the Utility software installed so I can set up this older device?
    Unfortunately no, at least not on the newer OS X versions. Basically since OS X Lion, Apple stopped supporting the older 802.11g AirPort base stations. You would to use either a pre-Lion Mac or a Windows-based PC to administer these older base stations.
    2. If it worked two days ago, why would it stop with the power outage?
    Not sure how you were able to administer the Express using v6.x of the AirPort Utility before. It shouldn't have been possible.

  • Why can't I use the adobe illustrator on under armor web page?

    Why can't I use the adobe illustrator on the under armor web page?

    Website address?
    If Flash is required to use the app on the website, Flash is not supported with iOS devices and Adobe recently announced they will no longer be supporting Flash with any mobile device.

  • Devices (iPad, iPhone) no longer can maintain wifi connectivity with time capsule

    My iPad and iPhone can no longer maintain wifi connectivity with time capsule.   Time capsule has connectivity to internet via Macbook, but not other devices.  This started after upgrade of devices to s/w 6.0.  Does anyone know if that could impact connectivity?

    Yes, this is often reported with iOS 6.. there are definitely more wireless problems.
    I recommend you reset the TC in the following ways.
    1. Change all names to SMB type.. ie short, no spaces and pure alphanumeric.. that includes the TC itself, wireless and hard disk. I recommend a different name for 5ghz so you can force clients to that band without auto voodoo affecting it.
    2. Use WPA2 Personal security only.. 8-12 character pure alphanumeric passkey.
    3. Lock the wireless channels.. particularly for 2.4ghz.. pick one of the channels, out of 1, 6, 11 as these are the only ones that do not overlap.. test each in turn for the best and most stable. TC should pick the best itself but that is voodoo and I am preferring to run the system without black arts.

  • HT4061 Why can't I use face time on 3G internet

    Why can't I use FaceTime on 3G internt

    This feature will only be available when the new update ios6 comes out in sept or october and will only be for the iphone 4s or the new ipad if havent got one of these devices then facetime will only work over wifi the reason apparently the older devices are unable to handle it requires more processing power.

  • Why can't I use facetime on 3G ?

    Hello guys,
    U know, facetime is really amzaing...
    But only wifi....
    Why can't I use that on 3G ?
    Anybody knows that ?
    Regards,

    http://developer.apple.com/wwdc/
    You are not talking to Apple here... we are all just users like you and have no inside knowledge of why FT is not operable over 3G, except for what Apple has said about the subject. I suspect it's a bandwidth issue.

  • Why can't I use the iPad as my smartphone?

    My basic question is,why can't I use the IPad as my smartphone? Ipad is doing everything what a smartphone does, except the calling facilities. Since IPad can connect to the Internet(WiFi), and via VOIP services like skype or yahoo, we can very well connect to any mobile or landline phone. So what I'm asking is, Ipad can very well provide some User interface as phone does and internally it can use the VOIP to connect to phones. Share your views.

    My basic question is,why can't I use the IPad as my smartphone?
    You can as long as you don't want to make calls over a mobile phone network as the iPad doesn't have the hardware to make calls that way.
    At least we'll be able to recognise you on a call:

  • Why can't I use data connection for FaceTime on iPhone 4

    My iPhone 4 says I have to use wifi in order to use my FaceTime and I was wondering why can I just use my AT&T data connection instead.Every other iPhone could use their FaceTime but the 4 cant.We have an update to be able to use both ?

    As already provided:
    "I believe AT&T requires that you be on one of the "shared" data plans in order to do FaceTime over cellular. If so, either change your plan or complain to AT&T, as this has nothing to do with Apple."

Maybe you are looking for

  • How do i send a single spreadsheet via email?

    I have a single spreadsheet i want to send. Just that spreadsheet though, not the entire file or the other spreadsheets in that file.

  • When opening a sealed file, are the Autosave-File and Temp-Files encrypted?

    Hi, when opening / editing a sealed file (e.g. a MS Word document), are the Autosave-File and Temp-Files encrypted?

  • How to add music to new itunes!! HELP! :C

    Hi, I updated the to the new itunes. I really don't like it. Anyway i was dragging all my music into the music tab on itunes and when i drag it into there it links? How can i add music to my itunes? Please Help! c

  • Dec. whse Status - Inboud delivery (EWM)

    Hi guys, I have a problem with an inbound delivery in the fact that the "Dec. whse" status has been updated in delivery header but I do not use EWM. This is likely a problem with the Idoc I received via the goods receipt interface we are using. I wou

  • MP will not boot from CD

    I'm trying to upgrade to SL from Tiger but the system will not boot from the CD. It reconizes the cd And launchs giving the install option. When install is selected I get a screen with only a restart option. After restart it comes back to the origina