Why can't touch and drag icons on flash websites? Maybe a possible future update?

Hello, I use Firefox 23 with Adobe Flash Player 11.1 plug in. One of my favorite flash sites to visit is the pokemon and the pokemon global link website. I can't touch and drag in this browser utilizing flash. The icons respond to me selecting them, but I am unable to drag them. It makes it very difficult to utilize these sites. I have no problem doing this in my dolphin browser. I'm a HUGE Firefox fan and I would like to get rid of dolphin browser completely. Is there a way to touch and drag on flash sites? Could this be applied to a future update possibly?
9/16/2013 Update: It Has Been A Week Now With No Response -Please Advise
***I Don't Get It***If no one can help me here then where can I forward this? Is there an actual tech support here or is this just another social forum? I would like to contact technical support. -Please Advise

Hi barb, well for one thing the vs of Flash Player is the old one. You need to update to the latest version which is 10.0.42.34.
The first link should be http://www.gourdlamps.com/presentations; that one and the other one work fine for me.
It could be that those two websites have updated to 10.0.42.34.
Here is the Adobe Uninstaller that you download and put on your Desktop http://kb2.adobe.com/cps/141/tn_14157.html
This is the Installer link for IE and you will SAVE this to your Desktop
http://fpdownload.macromedia.com/get/flashplayer/current/install_flash_player_ax.exe
Then go to this thread and follow my instructions, except use the links I gave you. The procedures are the same.
Before you do any of this, take a look at the Uninstall article and the last two NOTES. They are very important when uninstalling IE. The last NOTE: Use the "See Details" If you see the old version of 10.0.32.18 still there, follow those instructions in that NOTE.
Thread: http://forums.adobe.com/thread/561702?tstart=0  (If you have a problem with the link, look for the thread
"NPSWF32.dll error...." on the first page of the Flash forum.)
Also one other difference is after Adobe confirms you have the 10.0.42.34 installed, you would go to the manage add ons
and look for Shockwave Flash Object.....ActiveX Control......Flash10d.ocx ...... make sure that is listed and it is Enabled.
Java: If you have any old Java entries in your Add/Remove, Remove them via the Add/Remove process, wait until the entry no longer appears and when you are finished, Reboot. You can do this and install the Java before Uninstalling & Installing. Link to Java JRE 6 update 18 : http://java.sun.com/javase/downloads/index.jsp
If you have any questions, just post back.
Thanks,
eidnolb

Similar Messages

  • Can't Click and Drag Icons/Files

    Hi,
    I  am  having  issues  with  my  Macbook Pro  13inch  trackpad.
    I  can't  click  anything  and  drag  any  icons/files  as  I  usually  could. I  also  cannot  select  and  highlight  texts  too.
    Earlier  I  was  advised  by  someone  on  Apple  Discussions  Community  to  clean  the  trackpad  for  about  2  min  with  a 
    dampcloth. Later,  it  seemed  to  work  as  usual  but  after  3  weeks  I'm  facing  the  problem  yet  again.
    Anyone  has  a  solution  for  this  problem ?

    If the issue is with pressing the trackpad to click, if that is what you mean by clicking and dragging issues, more often than not it will be an issue with the trackpad itself and you may need a repair. The trackpad can be replaced on your Mac.

  • Why can't my mouse drag icons?

    I'm able to highlight and open files on my desktop but I can't drag them. Just happened yesterday, I was moving files onto my computer from an external HD, might have something to do with it.

    By mouse do you mean your trackpad or are you using a USB mouse?
    If external, then see if you have the same problem with your trackpad.
    If trackpad, are you having trouble keeping the drag going? If so, see the "origami" solution.
    Identify the model of MacBook you have and "mouse" for the best answer.
    -Ken

  • Why can't i drop/drag a playlist to my iphone icon in itunes?

    Why can't I drop/drag a playlist to my iPhone icon in iTunes?  If I try to manually sync, it says my phone is synced to another library and will be erased/synced with the library on my computer, which I don't want to do.  There are some songs on my current computer that would be deleted.  Do I have to completely try to rebuild the playlist?  I thought when I removed it from my phone last year, but saved it to my computer, I would just be able to drop/drag it to add it back on this year.

    You do it all the time with what from your MBP?
    You have manually manage music and video selected under the Summary tab for your iPhone sync preferences with iTunes?

  • Why can I no longer drag and drop in iMovie 11?

    Why can I no longer drag and drop in iMovie 11? This means I can't select transitions, titles, or even move clips within the project. Never had this problem before.

    Serious bugs in iM 11 with numerous lock-ups and crashes.  I shouldn't have upgraded -- now I'm pulling out my hair trying to complete a video project with it.
    Apple is losing their way.

  • Why Can I no longer drag and drop songs into Itunes playlists?

    Why can I no longer drag and drop songs into itunes playlists.  Was working fine then just stopped???

    found solution, thanx everyone

  • Why can't I place disk icons on my desktop?

    Why can't I place disk icons on my desktop?
    I installed OSX Lion, version 10.7.1 from the App Store onto the internal disk of my MacBookPro which was cloned to an external FW800 GoFlexDesk drive. I booted from that external drive, ran the disk utility to erase and then repartition my internal drive so that I would have a "clean" installation of Lion. My disk icon (for the internal drive) does not even show in Finder windows. In Snow Leopard I showed my internal drive, my Time Capsule drives, and any external drives on my desktop as icons. Now these do not even show in Finder. I know they are there, because if I choose the path view option, they are shown when I pick "All My Files" under favorites. I can navigate backwards in the path bar, but still they do not actually allow me to select them or drag them to the desktop. In Snow Leopard, it was an option to show disks on desktop in general system preferences, but I find that option no where in Lion! What simple little thing am I missing?

    PilotShawn wrote:
    What simple little thing am I missing?
    Finder > Preferences > General > Show these items on the Desktop?

  • Why can't I simply drag music from my external hard drive to my ipod classic?

    Why can't I simply drag music from my external hard drive to my ipod classic using my mac?

    downpat wrote:
    So after I get my music put on my computer, then moved to my ipod, do I have to delete music from itunes  to free up space?
    Not a good idea.
    What you could do, is have the Library content on the external hard drive and simply tell your iTunes programme to look on the hard drive for your music etc.. However, once you set that up, that hard drive needs to be connected and ready to read, before you start the iTunes programme. If it isn't ready, iTunes will simply go back to the default location for the music, find nothing and then you'll be back here saying that you've lost your Library.

  • Why can't I delete added mailboxes on my iPad mini since iOS 8 update? Every time I try to delete an old mailbox that I added it boots me right out of mIl completely. I want to clean up and get rid of old unused mailboxes?

    why can't I delete added mailboxes on my iPad mini after the ios8 update?

    The mail app is crashing on you for some reason. Close the mail app and reset your iPad.
    In order to close apps, you have to drag the app up from the multitasking display. Double tap the home button and you will see apps lined up going left to right across the screen. Swipe to get to the app that you want to close and then swipe "up" on the app preview thumbnail to close it.
    Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
    If that doesn't help, you can also try resetting all settings. You will not lose any data, but most of the device settings will have to be entered in the settings app again. Settings>General>Reset>Reset all Settings.

  • Touchpad Synaptics: Touch-and-drag while scrolling

    Say there's text you want to highlight, but it spans more than the current amount displayed on your screen. On a touchpad, I do the touch-and-drag gesture (tap once, then drag with touchpad) until I highlight all of the text. However, if the text is large, then merely putting the mouse at the bottom of the screen makes for considerbly slow scrolling. Normally on Windows, I would instead apply a second finger to drag up and down, which would scroll the screen at a desired faster rate.
    Is there an equivalent that you can do in Linux? The TapAndDragGesture in synaptics allows for the touch-and-drag feature, but it doesn't allow for the extra one where you can apply the second finger to scroll up/down while still highlighting. I haven't found any other alternatives that allow one to highlight while scrolling relatively fast. (LockedDrags doesn't do this either.)

    nil wrote:
    Say there's text you want to highlight, but it spans more than the current amount displayed on your screen. On a touchpad, I do the touch-and-drag gesture (tap once, then drag with touchpad) until I highlight all of the text. However, if the text is large, then merely putting the mouse at the bottom of the screen makes for considerbly slow scrolling. Normally on Windows, I would instead apply a second finger to drag up and down, which would scroll the screen at a desired faster rate.
    Is there an equivalent that you can do in Linux? The TapAndDragGesture in synaptics allows for the touch-and-drag feature, but it doesn't allow for the extra one where you can apply the second finger to scroll up/down while still highlighting. I haven't found any other alternatives that allow one to highlight while scrolling relatively fast. (LockedDrags doesn't do this either.)
    This topic isnt really something normally answered in the Arch forums. Im not saying people wont answer (as I myself am going to), but generally this is something better for upstream developers to consider as opposed to Arch users. Just trying to point you in a more productive direction for the future Many times if you ask something like this Archers will just ignore you so you get the point..
    That said, my touchpad on Arch works exactly as you describe desiring. I double-tap 1 finger to initiate the highlight function, then move down to select more text of course. If I reach the end of the visible page, I can simply swipe my second finger and it will initiate vertical scrolling without affecting text selection. FWIW, I switched to xf86-input-synaptics-git in the AUR for multitouch, and that is how it works for me.
    I do not have edge scrolling or sustained scrolling enabled on my system as it drives me nuts. When I really want to select a ton of text quickly, Ill initiate by holding the left touchpad mouse button down, then two-finger scrolling up or down. That is the easiest way for me..

  • User selecting multiple UIButtons with touch and drag

    I am wondering if it's possible to have a user touch and drag across multiple buttons so that I can tell which buttons have been selected.
    This is similar to to a matrix of buttons in OS X. If a user clicks and drags over a number of buttons, there is an array that can be read to see which were 'selected'. I don't see a UIMatrix and Embed Objects In menu in Interface Builder while in iPhone development only gives a View selection.
    Thanks!

    It seems this is being done by others. However, right now, I'm tracking the touch location and manually figuring out which button is under the drag. I let the underlying view be the user interaction and turn off the interaction on the UIButtons themselves. Yet, this seems to task the processor quite a bit and it takes too long to highlight the UIButtons.
    It's such a simple thing for OS X, I can' believe they dropped this functionality on the iPhone. Can anyone please give some hints as to something to try here.
    Thanks.

  • I have created a site with iWeb. I have replaced the iWeb Nav bar with a vertical one I made myself. Problem is, my top button disables itself if it overlaps into the "hidden" nav bar area. I can cmd click and drag it into this area, but then all the rest

    I have created a site with iWeb. I have replaced the iWeb Nav bar with a vertical one I made myself. Problem is, my top button disables itself (and the animation doesn't work) if it overlaps into the "hidden" nav bar area (indicated by a blue rectangle). I can cmd click and drag it into this area, but then all the rest of my site is pushed down the page. Don't know what to do about this. I don't know how to bring the rest of the page up without dragging it also into the designated nav bar area. Also, by doing this, is it affecting my site in ant way? see my site here at www.steveburrowsimages.com
    The home page is with it all draged into the nav bar area and the about page is with is outside the nav bar area (notice that the top button does not animate or work as a button.
    Getting confused here. Anyone got any ideas?

    Well, you made a good start with SEO by getting rid of the iWeb default navigation since it doesn't help the spiders and, out there in the real world, there are more people than you would think with javascript turned off in their browsers.
    One of the downsides of iWeb is that it doesn't allow for the alt attribute in the img tag. Its well worth adding these to give you extra keywords even if you have captioned all your images. Use iWeb SEO Tool for this...
    http://www.iwebformusicians.com/Search-Engine-Optimization/Tags.html
    iWeb, just like most drag and drop software, creates a huge amount of code which causes the pages to load slowly in the browser. Running you files through an optimizer will help to reduce this problem and further reduce the size of image files even beyond the initial optimization you do before loading them into iWeb...
    http://www.iwebformusicians.com/Search-Engine-Optimization/Optimize.html

  • Can't click and drag tracks to regular playlists, etc. in iTunes 10.4

    Can't click and drag tracks to regular playlists, etc.--I'm using iTunes 10.4 on Lion.  Thanks.

    Well, I don't see any mention of an updated Lion drivers on Wacom's site, but heres a link to the driver download page and a link to their online community.
    Drivers | Wacom Americas
    Wacom Community
    WTH.

  • Why are the movie and television icons missing from my Apple TV menu?

    Why are the movie and television icons missing from my Apple TV menu?

    likely because it does not have a working connection to the internet
    check the settings and maybe reenter the wifi pasword

  • Why can I download and install CS6beta but the program does not activate???

    Why can I download and install CS6beta but the program refuses to be activated on the idiotic grounds that either I am not connected to the internet or my computer clock is not showing the right time?  If in New Zealand we're not allowed to use the beta, why does Adobe not have the decency and courtesy of telling us so and why instead of feeding us with those stupid putoffs???    

    I had a note from PS Pattie ; I can't find it here.  Anyhow, these were her questions and my answers:
    Q:Did you download from this location?  http://labs.adobe.com/technologies/photoshopcs6/
    A: Yes
    Q:Did you select TRY and enter your Adobe ID?
    A: I was then asked to "Sign in". I pressed the sign and got the following reaction:
    Please connect to the internet and retry. Either your computer is offline or the clock on your computer is set incorrectly, causing a connection error.  An internet connection is required. Please connect to the internet or adjust your clock and try again.  If this problem persist, please contact Customer Support.  I did so and was told "This page is not available"
    Q: Did you try to download again and install?
    A:  Yes, three times – each time 1.71GB.  I tried many other devices; none worked.
    gw

Maybe you are looking for

  • I need help with the boot setup in BIOS

    I am trying to reinstall windows 7 back onto my sister's laptop, The BIOS Version is 3.5  I went to the boot order to put the cd/dvd rom in the first boot order and then the notebook hard dive second, selecting f 10 to save and exit. When the compute

  • Automatic mailing to vendor

    Hi all, Reg: Automatic mail has to sent to the vendor. After the vendor code is created at that time itself the mail has to send to the Mail ID which is specified in the vendor master with the code and general details. Regards gvr

  • Coldfusion MX7 error with file upload

    Hi all,         I am using coldfusion mx7 server. While upload an excel file with(97-2003) format, I am getting the following error:  Unable to construct record instance, the following exception occured: null I am getting this error when I enters som

  • Acrobat Reader X sometimes prints heavy black hoizontal lines.

    About 30% of the time Adobe Reader X prints heavy black horizontal lines across many sections of the page.   The lines start close to the left edge of the page and continue to the right side of the page, introducing more and more lines until the bloc

  • Cashflow statement

    hi any experts know any standard report for cash flow statement in sap?how can systmen produce this report? richard