Why cannot control iPhone through USB in Honda or Yamaha

My wife and I have two iPhone 5s and two iPads at 8.1.3 that can no longer be controlled when plugged into usb devices such as my 2014 Honda Odyssey and my Yamaha receiver.  The song titles appear and I can scroll but will not play the music after clicking using the Honda or Yamaha controller.  Only way to play music is through the iphone/ipad.  Everything worked fine up until iOS 8.  Obviously a pain and safety issue if I can't select songs from my vehicle system and have to resort to looking at the iPhone instead.

Check to see if there is a software update for the Honda. I just got a software update the other day for my Hyundai, although it was working just fine with my phone. I've read of other problems with Honda and the iPhones. It seems what I remember on a couple of threads is they were working on updates. You can search here to see if you can find anything on the threads, but they also seemed to be geared more towards Bluetooth.

Similar Messages

  • Connecting iPhone through USB hub

    I have a weird problem. When I connect the iPhone through a USB hub, nothing happens. It doesn't synchronize, it doesn't charge. When I connect the iPhone directly to the computer, with the same cable, it works as supposed.
    The weird thing is, I have been connecting the iPhone successfully through this (powered) hub for half a year. But suddenly it doesn't work. Everything else connected through the hub works fine.

    You're going to want a USB hub that comes with an AC adapter: the iPhone will draw as much power from the port as it reasonably can, and prefers up to 1 A (USB spec is 500 mA) at 12 V to charge as quick as possible. This tends to lead to undervolt situations on the bus when other devices suddenly draw more (a mouse wakes up, a HD spins up, et cetera).
    I use my iPhone 3G with a dock on a USB hub that's powered, and have had minimal issues. This isn't an endorsement, just FYI.

  • Cannot install IPhone 4 USB Driver, Phone stuck in "Connect to iTunes" mode

    Hi.
    I have the new Iphone 4 - for 2 days, and i can't install the Iphone 4 USB drivers. I tested the cable, the OS.. everything and now after reset i can't use my phone since its stuck in connect to Itunes mode.
    Every time i try to connect the USB, Windows recognize it as "unknown device" with (Code 43). If i try manually to select the Driver from common/apple/drivers the error is (Code 10).
    Tested the 2G and seems its connected without any problem and windows recognized the phone, but its not recognizing my Iphone 4 (tested on 2- Windows 7 OS), found some topic that Reset can help such issues, and now im stuck with Phone that have only emergency calls.
    Using latest iTunes , and ver 4.0.2
    Please help!!!!

    Same problem. This worked for me
    http://www.youtube.com/watch?v=nQnb4wIxNFg&feature=fvwrel

  • Honda stereo cannot control iPhone 5 music via USB

    I have a 2012 Honda Fit with the stock stereo. I have been able to play the music off of my iPhone 5 when connected to the car stereo via the USB/Thunderbolt cable. It seems after I upgraded to iOS 8 that I can no longer hear or control the iPhone from the car stereo's controls. I can see on the display that it playing song 14/401 (or whatever number) but no music.
    I am able to use my Plantronics Bluetooth ear bud to answer & make phone calls.
    The phone is able to charge while plugged in & I am able to sync with iTunes on my desktop PC.
    Is this a Honda Issue or Apple not providing compatibility with the car stereo?
    Anybody else having this issue?
    Thanks!

    I have tried all the suggestions above.
    Restoring, Reseting, Unpairing etc...
    It "works" for a little time, but after a couple hours or so it starts failing again.
    All the fixes reported are temporary solutions, we need a definitive solution

  • HT1688 why is the iphone 5 usb charger always breaking?

    i have two iphone 5 and both usb chargers are broken. I would like to know why ? I think is that maybe they made the wires differently because it seems that it breaks so easily and i have had ipods and iphones before that werent like that.

    Make sure you are only pulling and pushing the lightening connecter by the plastic connector itself.  Never pull the wire (actually, this goes for any kind of connector or plug - never handle the wire cord itself, always just the end connector).  You should push the connector straight in, or pull it straight out.  I have 6 lightening cables for my iPhone 5 and iPad retina (couple at home, in the car, at work, briefcase and backpack) and have no issues with any of them.

  • Why cannot charge iphone 4 after updating to ios 6.1.2

    After i have updated my iphone 4 software version to ios6.1.2, it cannot be charged using the charger adapter that is from the box that also contains the iphone. It was charging fine after the update. How to i solve this problem when it is left with 33% or less?

    The Basic Troubleshooting Steps are:
    Restart... Reset... Restore from Backup...  Restore as New...
    Restart / Reset
    http://support.apple.com/kb/ht1430
    Backing up, Updating and Restoring
    http://support.apple.com/kb/HT1414
    If you try all these steps and you still have issues... Then a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is the Next Step...
    Be sure to make an appointment first...

  • While charging through usb port i am getting small shock at the edges of my iphone 5??why is this?

    I am getting small shock when charging my iphone 5 through usb port?why is this??any solutions??

    Bring the phone and USB cable to Apple for evaluation

  • I am using windows 7 starter,just downloaded itunes 10.5.2,while install getting prompt,cannot read ipodservice.exe,and after install itunes is not read iphone or ipod while plugging in through usb cable. Any ideas ,whats going wrong?

    I am using windows 7 starter,just downloaded itunes 10.5.2,while install getting prompt,cannot read ipodservice.exe,and after install itunes is not reading iphone or ipod while plugging in through usb cable. Any ideas ,whats going wrong?

    problem solved.
    I phone 4s screen froozen

  • Why is my iphone 3g drawing too much power through USB?

    I'm getting an error that my iPhone 3G is drawing too much power through USB and the computer shuts the port down. I've tried it on PC & Mac, same thing both times. Won't charge on wall charger or iHome either... I've tried turning on/off & resetting, but still won't charge. Ideas?

    just wondering ... did anyone figure out the problem where when you plug the iPhone into the computer it says that the USB Device is drawing too much power? any help would be appreciated.

  • When bluetooth headset is connected to iphone,I can't hear iphone ringing aloud when I have a call or a text. Do i really have to wear the bluetooth headset all the time in my ear to know when I have a call or a message? Why it doesnt ring through iphone?

    when bluetooth headset is connected to iphone,I can't hear iphone ringing aloud when I have a call or a text. Do i really have to wear the bluetooth headset all the time in my ear to know when I have a call or a message? Why it doesnt ring through iphone but it rings through the bluetooth headsets?
    In other phones, you can hear the phone ringing and if it was connected to bluetooth, you could pick up the call from the bluetooth headset.
    Here with iphone, if its connected to bluetooth headset, it only rings through the headset, which means that if you dont have the headset in the ear all the time, you cannot know that you have an incoming call or message.
    Any ideas - solutions - comments please?

    I'm having the same problem. I had a plantronics 975 (which I lost, sadly). When connected, the ringer would always be routed through the bluetooth and the iPhone's external speaker. When in silent mode, the iPhone would only vibrate, but I could still hear the ringer in the bluetooth.
    I just bought a new Plantronics Voyager+. Now when it's connected, all sounds are routed to the earpiece - including the taps, etc. The iPhone's speaker doesn't ring at all, unless the bluetooth is disconnected or powered off. I'd really like to be able to hear both, like I was before. This is an iPhone 3G running iOS 4 (latest version, not sure what it is exactly). Haven't updated software/firmware in between bluetooths, just changed the earpiece.

  • Can i control mt iPhone through i cloud using my laptop

    can i control mt iPhone through i cloud using my laptop

    scrapman26 wrote:
    i was told it can take between 5 and 72 hours for the carrier unlock is done.
    And have you waited that long? If not, then that's why it's not done yet.

  • IOS8 music control through usb in car (Jeep & Volvo)

    after updating both mine and my wife's iPhone5's and to iOS8 our in car controls started working intermittently for actually starting, skipping, pausing, etc.. playback of our iPhones both in my 2011 Volvo S40 and her 2014 Jeep Cherokee (through USB connection, which previously worked with no issue).
    we then upgraded our phones to iPhone6's and same issue (after updating to one the next small iOS8 updates the issue was slightly less intermittently, but still sporadic and very unreliable; 8.1.3 update made no difference).
    control works perfectly through bluetooth streaming in her Jeep, however.
    I assume there were changes made to the music playback control (trickplay) mapping in iOS8, is there a ticket out to fix this or is the issue even know?
    Are others having the same issue?

    I went here: https://rsur.extra.chrysler.com/rsur/Uconnect.do
    You have to have a flash drive to install the image to and plug the USB into your Jeep.  Haven't tried that yet but will tonight.

  • IPhone 4S only shows up in iTunes when connected to the laptop through USB, even though wifi sync has been enabled

    Why will my 4S only show up in iTunes when it is connected to the laptop through USB? Even though I have ticked the box for the wifi sync and had no problems with it being plugged into the wall and still showed up in iTunes up until a few days ago. Help please !

    Connect your iPhone to your computer and click on it, you should see an option under options for 'sync with this phone over wi-fi' unclick it and it should stop connecting over wifi.

  • Iphone internet through usb

    Is there a way to connect my iPhone to the Internet through the USB cable?
    I have an ADSL Internet connection, and cannot figure out how to connect to the Internet from my iPhone through the USB cable (supplied with each iphone).
    Thanks

    If you get a wireless router to create a wi-fi or wireless network at home with your wireless router connected to your ADSL modem (which will be connected to the modem via Ethernet), you can access your ADSL internet connection via wi-fi with your iPhone.

  • 2009 Honda Pilot - Random Iphone / Ipod USB Integration issue

    I just purchased the Iphone 3g. Everything worked great for 1 week. Now, when I plug in Iphone to USB in my new 2009 Honda Pilot, I get this message: This accessory is not made to work with Iphone. Would you like to turn on airplane mode to reduce audio interferance? Yes or No. Then, I get a message on my radio display which reads: Device not supported.
    This is random. It will work fine one day, then the next time I plug it in, I get all these messages and I cannot listen to my Ipod with my Iphone plugged into the USB cable in the 2009 Honda Pilot. Please Help... this is SOOOOO frustrating. email [email protected]

    I needed to restored a few times and it started working again

Maybe you are looking for

  • Generic GRE not working (ver 4.1.3.55)

    Hi everybody. I'm testing in Lab a configuration for one customer. It's a basic environment with : DATA CENTER (wccp) 1 WAEs 7341 and 1 Cat6506 routers BRANCH (inline) 1 WAE 574. Optimization works with l2-redirect and gre return in DATA CENTER !! It

  • How to send converted PDF direct to a printer

    Hi, I have a .net app that calls LiveCycle ES2 service in order to convert an EPS into a PDF. My question is does anyone know how once the PDF has been generated to have LiveCycle ES2 send it directly to a printer? Also, is there any way to set the p

  • Regarding  std report for puchase order

    Iam workig on the Std report on 0pur_c01 cube. when i opend std qurery based on that cube for item. we have so many queries. in report i can see the prices of vendor , bur for some prices i can see the value as 'x' what that x means

  • Upgrading to FCE4?

    Hi all, I just got an HDR-SR12 Sony Handycam for Christmas and I'm trying to get started editing. I have FCE v3.5 and from what I understand, I need to upgrade to FCE4 to edit the HD footage from the camera. On the Apple store website, it says that I

  • Can't see USB printer option in Cisco Connect

    Just fired up an e4200 router and was realy easy and everything working great HOWEVER I can a Canon MP490 printer that I have connected to the router via USB and Cisco Connect is only showing Wireless Printers as a connection option!! I am on a MAC u