Why cant I figure out this WRT54GS???!!

Eariler I wrote on this perticular router about connecting it to the internet wirelessly instead of wired to a ethernet jack. I have gone nowhere! I try to install the software, but it always stops at a password. there is 5 letters or digets or whatever already entered in which I had no part of entering! thats as far as I have come. Can anyone give me a walkthrough on connecting to someone elses' wireless Internet through my non-wired router???

I think that the reason you are having problems is that WRT54GS was not designed to do what you are asking. The device is designed to receive a wired internet signal, filter it, then broadcast a local wireless G network. You are asking for a device to receive a wireless G network signal. It might be possible to do the conversion, but I doubt it. There is probably too much hardwiring in the box to make the conversion possible with firmware and/or settings.
Instead of the WRT54GS, it sounds like you really want a WET54G (wireless G ethernet bridge). This will connect to a wireless G system and give you a wired LAN port. If you need more than one wired port, connect the WET54G to a 4 or 8 port switch.
Alternatively, if you just have one or two computers that you want to connect to a wireless network, you could install a wireless G adapter in the computer. For example, a desktop computer could use a WMP54G, a laptop could use a WPC54G. Or either system could use a WUSB54G.
Hope this helps.

Similar Messages

I have an apple id but ı can not use it for sign in to itunes connect account while publishing my ibook document. Why ı can not login? What can ı do to figure out this problem?

I have an apple id but ı can not use it for sign in to itunes connect account while publishing my ibook document. Why ı can not login? What can ı do to figure out this problem?

As note already on the iBA forum [ AppleID for ibooks publishing ], you need two IDs. You can't use your developer ID.
If you already signed up for books with that ID, you need to talk to Apple to straighten things out.

How do i automate volume on an audio track??? why cant i figure this out.

in logic 8 i cant figure out how to automate volume for an audio track. With midi its fine i just use the hyper editor but with audio i just cant get it figured out. I want to mute the portions of a vocal track where there are no vocals.

Go to your key commands window and find out how
to view volume automation.
Then press that button and automate away.

Have a look see what you can do .why cant anyone help with this is it that complicated?

HERE IS WHAT I HAVE DONE.
All i am trying to do is insert a simple piece of audio what
am I doing wrong. Is it my browser pluginfolder? I dont think so
because flash shockwave mp3 mp4 midi wave avi mpeg wma quicktime
realtime everthing plays outside dreamweaver is it dreamweaver
plugins? I have downloaded flash and shockwave from this site via
manually install plugins from websit preview in design view. Is it
that my folders are just not configured correctly? Why do i get
these errors please please please help some one has to know...
here is what i have being doing .
1. Made a folder and called it webwork.
2 Made a folder and called it imagies
3 made a folder and called it media. I have put the media
folder in the imagies folder the imagies folder in the web folder
so Im left with one main folder.
4 I have defined dreamweaver site as follows. local
rootfolder (webwork) c/documentsandsettings/myusername/webwork
default imagies folder
c/documentsandsettings/myusername/webwork/imagies
5 on starting a web page I call it my webwork1.html and save
it.
6 I import a converted media file from flash encoder put it
in the media folder along with an none converted media file just to
see .
7 I goto insert media shockwave or insert plugin or insert
flash( look in webwork imagies media select the file (my tune)
8 When I try to play this in design view i get the error
message (unable to find media that handles this media type
dreamweaver looks in both the configuration/plugins folder and the
plugin folders of each of your web browsers)so i copy my web
browser plugin folder and put it in my webwork media folder still
nothing
9 When I view it on my browser the media icon(shockwave)
disapears and the puzzel icon appears (plugin) when i click the
plugin no plugins are found
10 When i do this process through flash button paper or text
and load it up to my web browser it downloads the tune and plays
away via my plugin winamp5?
11 All I want to do is to emmbed a tune so you have the
option of playing it stopping it (but not downloading it to listen
to) why cant this work for me? Is there a fault with the browser or
dw8 or me.
system windows 2000xp
browser firefox 1.5 plugins all
PLEASE HELP I HAVE TRIED ALL FOR TWO WEEKS
for one on one and 10mins of
your time please mail me

Connect the iPod to your computer and restore via iTunes
iTunes: Restoring iOS software

Help me figure out this script

Hey Guys,
This is the first time EVER posting a blog, so bear with me
if i'm a bit slow. My problem is that i'm just getting into Flash,
just got Flash CS3, and I downloaded a pre-made menu from
istockphoto.com. The thing is I can't figure out how to get the
buttons to link to another scene in Flash. Can anyone help out? and
if i'm not posting enough info let me know what I need to do.
Thanks for your time.
Alx.
Here's the action script, where do I change the script to
play the next scene of my movie?
on (release) {
getURL("#");
on (rollOver)
if (_root.link != 5)
gotoAndPlay(2);
} // end if
on (releaseOutside, rollOut)
if (_root.link != 5)
gotoAndPlay(21);
} // end if
on (release)
if (_root.link != 5)
_parent["but" + _root.link].gotoAndPlay("s2");
_root.link = 5;
} // end if
}

on (release) {
getURL("#");
//if you click the button this script is attached to, it will
take you to "#" in your browser.
on (rollOver)
if (_root.link != 5)
gotoAndPlay(2);
} // end if
//The above script says that if the _root variable "link"
does not = 5, to gotoAndPlay(2) of the current movieclip.
on (releaseOutside, rollOut)
if (_root.link != 5)
gotoAndPlay(21);
} // end if
same thing as above, but for releaseOutside, or rollOut, and
it will play 21.
on (release)
if (_root.link != 5)
_parent["but" + _root.link].gotoAndPlay("s2");
_root.link = 5;
} // end if
on click, this button will will go to _parent.butx (where x
is _root.link) .gotoAndPlay(frame "s2") -- if _root.link does not =
5. make sense? It then sets the _root variable "link" to 5.
so you have two on(release) button functions, which isn't
right. Also, I've never used two on statements in the same shot ---
on(releaseOutside, rollOut) does that work properly?
so if you want to gotoAndPlay a certain scene, you can just
change a bit of the script. -- think you can figure out where with
my explanations? Or did I just make it more confusing.

Trying to figure out this setup...

I currently have an Airport Express (AX) from a few years back. I'm interested in getting the new Airport Extreme (AE) for improved range and speeds, guest network, etc.
My cable internet enters my house right by my home theater. So, I have the modem there plugged into my AX. My Mac across the room gets wireless from the AX (along with our iDevices), and sends Airplay back to the AX which is connected to my stereo.
If I put in an AE after my modem, it will then put out the network for my Mac, and I will have my AX right next to it for Airplay. Does it make sense to have the AE and AX next to each other? Is there any easier way to setup Airplay? I feel like it's a waste to have the AX right there, rather than using it somewhere else in the house to extend the network, but I can't figure out a better setup.
Thanks for any and all help!!!
Brian

Do you mean connect the AE and AX via ethernet?
Yes
Is Airplay then going through the AE to the AX?
AirPlay goes through the main router first before it reaches the AX, no matter whether you are using wireless or Ethernet to connect.
Will the wireless on the AX then be disabled somehow, since the AE will be putting out the network?
There's no reason to have two routers that are close together both putting out a wireless signal, so the wireless on the AX would be disabled to avoid the potential for wireless interference that is likely to occur when two wireless routers are in close proximity.

Autorun.dll, why cant you stay out of this

I have been trying to upgrade all the non-domain computers before the domain ones and when I try to do that I keep getting erorr "autorun.dll is missing or corrupt" code:0x7e and if you are wondering about my previous thread this morning I was so stressed that I passed out (but I am a strang person so back on topic) and its only on the compaq presario cq57 pcs I have ran SFC/scannow and a hard drive check on reboot
This topic first appeared in the Spiceworks Community

A reset should help. Tap and hold the Home button and the On/Off button at the same time for approximately 10-15 seconds, until the Apple logo reappears. After the logo reappears, release both buttons and await restart.

I keep getting different errors when i try to upgrade why? i have been 5 hours trying to figure out this ? im soo freaked

help please.
im on firmwere 4.3.5 im trying to go up to 5.0...

Windows 7 includes DirectX 11 in its baseline and it is not necessary to install another version of it. Your problems may be caused by the installation of the version of DirectX you installed. Uninstall the one you installed and see if you
still have the errors.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ”

Why cant adobe put out anything without a bug?

I have had problems with anything adobe since I first owned a computer 15 yrs ago! I'm not saying i'm a computer expert but after 15 yrs I know just maybe a little! That said I'm wondering if these people who work at adobe are required to get stoned before coming to work! Something is going on there that seems to prevent the big brain from getting in the way of the little brain. In case you have never heard this comparison, if we can send a man to the moon then why in god's name cant adobe make a problem free program? problems downloading , problems freezing( ok well they did fix that problem!), problems not uninstalling previous versions( why th hell do i have to worry about this?), problems with flash player allowing me to play online games and causing my browser to freeze(I guess they havent fixed this one yet!), problems, problems problems! If I had a dollar for every hour I've spent trying to fix adobe problems on my computer I could retire on that instead of my union movie pension! All's I can say is there must be some good **** going around over there at adobe because their brains are made out of the same stuff as the name of the place where they work.

I don't know; I never had the slightest problem ever since I started using Adobe products some 17 years ago.

Please help me figure out this symbol on my 8520 homescreen

Hey everyone, I have a blackberry curve 8520 from Iwireless. I recently went to Wisconsin from Iowa and when I got back on my homescreen at the top left is a 3 next to a circle that has a white arrow in it pointing southwest and on the northeast side of the circle there is a red dot on the end of the arrow.
What is this symbol and how do I get rid of it? Pleas someone help me I've been trying to figure it out for over a week now with no luck.
Thank you so much,
Desirae

Hi there, if memory serves, that is likely indicating that there is an update for one or more of your applications that you downloaded from BlackBerry App World.
You can view the actual messages by going to the main Messages folder (if you don't see it, then it may be hidden - it can be exposed by going to the home screen, press the BB Menu button and select Show All). If you can't find the messages by scrolling through, then press the BB Menu button and select View Folders. This will give your a view of all applications which are able to leave notifications. You can search through these and find it there.
Once you've viewed the messages, the icon should disappear.
I hope that helps!
If you want to thank someone for their comment, do so by clicking the Thumbs Up icon.
If your issue is resolved, don't forget to click the Solution button on the resolution!

Can someone help me figure out this problem in my program?

i cant get it to determine a winner, can someone help me? heres the program
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
public class TicTacToe implements ActionListener {
     private JFrame window = new JFrame("Tic-Tac-Toe");
     private JPanel inputPanel = new JPanel();
     private JPanel boardPanel = new JPanel();
     private JButton button3 = new JButton("3 by 3");
     private JButton button4 = new JButton("4 by 4");
     private JButton button5 = new JButton("5 by 5");
     private JLabel label = new JLabel ("Click a button to choose game board size:");
     private JButton buttons[][];
     private int boardSize=0;
     private int count = -1;
     private String letter = "";
     private boolean win = false;
     public TicTacToe(){
     window.setSize(500,500);
     window.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
     inputPanel.add(label);
     inputPanel.add(button3);
     inputPanel.add(button4);
     inputPanel.add(button5);
     button3.addActionListener(this);
     button4.addActionListener(this);
     button5.addActionListener(this);
     inputPanel.setSize(500,200);
     window.add(inputPanel,"North");
     //Make The Window Visible
     window.setVisible(true);
     public void actionPerformed(ActionEvent a) {
          if(count==-1){
               letter="-";
               count=0;
          else{
          count++;
          if(count % 2 == 0){
               letter = "O";
          } else {
               letter = "X";
          if (a.getSource() == button3) {
               boardSize=3;
          else if (a.getSource()== button4){
               boardSize=4;
          else if (a.getSource() == button5){
               boardSize=5;
          if ((a.getSource() == button3)||(a.getSource()==button4)||(a.getSource()==button5)){
               button3.setEnabled(false);
               button4.setEnabled(false);
               button5.setEnabled(false);
               buttons = new JButton[boardSize][boardSize];
               for(int i=0; i<boardSize; i++)
                    for (int j=0; j<boardSize; j++){
                         buttons[i][j] = new JButton();
                         boardPanel.add(buttons[i][j]);
                         buttons[i][j].addActionListener(this);
               boardPanel.setSize(300,300);
               boardPanel.setLayout(new GridLayout(boardSize,boardSize));
               window.add(boardPanel,"Center");
          JButton pressedButton = (JButton)a.getSource();
          pressedButton.setText(letter);
          pressedButton.setEnabled(false);
          if(win == true){
               JOptionPane.showMessageDialog(null, letter + " wins the game!");
               System.exit(0);
          } else if(count == (boardSize*boardSize) && win == false){
               JOptionPane.showMessageDialog(null, "The game was tie!");
               System.exit(0);
     }

You never even do anything that tries to set "win" to true. So you haven't even tried determining a winner. We aren't here to do your work for you.

Help, I just can't figure out this code or what to do to make it work

ok, what i'm trying to do is the following: I created a class called Enrollement, in that class I put in an array of 30 objects to hold the places of 30 names that I used Scanner to bring in from a text file. Ok, that part of the code alone works fine. After that, I know want to write a function that will count the number of times each letter (a-z) appears in the first and last names in the class that are held in that array. I have been working on this for a while making changes doing a bunch of stuff but i keep getting errors with the second part that I honestly don't know how to fix or what i'm doing wrong. I am very new to Java. IF/when anyone responds, please dumb down your answers as much as possible so that I can understand what you are saying, I just have no idea what the errors mean or how to make this program work. my code is below:
import java.util.Scanner;
   import java.io.File;
    class Enrollment{
       public static void main(String [] args)throws Exception{
         Person [] name = new Person [30];
         Scanner sc = new Scanner(new File("names.txt"));
         while (sc.hasNext()){
            String lastName = sc.next();
            String firstName = sc.next();
            sc.nextLine();
            System.out.println("Name: " + firstName + " " + lastName.substring(0,lastName.length()-1));
       public int chararcterCount(char c){
         int count = 0;
         for(int i = 0;i<30;i++){
            Person p = Person ;
count = count + p.charCount(c);
return count;
public static void main(String [] args)throws Exception{
Enrollment e = new Enrollment();
e.print();
System.out.println("Letter a appears " + e.characterCount('a') + times);
keeps telling me that public static void main.... is already defined and i know that but once i delete that part from program i just keep getting more errors later and i just have no clue how to make this all work

the program is supposed to count the number of times
a certain letter appears in the first and last names
of the class.I was asking about the particular code snippet you posted, not about the program.
....p.charCount is supposed to count the
number of times that character appears, or at least
that's what i want it to do, Does it do that? Did you test it? You should write a main method that just constructs a Person object and then call its charcount method for vairous characters--one that appears zero times, one time, and multiple times--and see if you get the right results.
i'm not too sure of the
rules aorund here and i don't know if this is taboo,
but would it be possible tot talk to you in real time
on AOL Instant Messenger or somethingNo, most people here (myself included) will not do that. It denies others the chance to learn from your problem, and prevents others who might help you from participating in the conversation.

Can't figure out this NullPointerException

Hi I posted yesterday that I was making an infix to postfix converter for school and I thought I had it finished and all good when i compiled a testapp for it and got this:
Exception in thread "main" java.lang.NullPointerException
     at myStack.push(myStack.java:14)
     at inToPost.translate(inToPost.java:14)
     at itpTest.main(itpTest.java:5)Here is the code that is creating this error:
Method Push in myStack:
public void push(String str)
          Node newTop = null;
          newTop.item = str; // Line 14
          newTop.next = top;
          top = newTop;
     }method translate in inToPost
public void translate(){
          String token;
          inFile.open("data.txt");
          while(!inFile.eof()){
               token = inFile.readString();
               token.trim();
               if(token.compareTo("open") > 0){
                    theStack.push("open"); //Line 14
               else if(token.compareTo("close") > 0){
                    gotRightPar(token);
               else if(token.compareTo("plus") > 0 || token.compareTo("minus") > 0){
                    tokenIsOp(token, 1);
                    break;
               else if(token.compareTo("times") > 0){
                    tokenIsOp(token, 2);
               else if(token.compareTo("pow") > 0 || token.compareTo("goob") > 0){
                    tokenIsOp(token, 3);
               else
                    output = output + " " + token;
          inFile.close();
     }Can someone give me some insight on maybe why this is happening.
I read the API on this error but I don't see why I would have a problem.
As always thanks in advance for the help!

You're a total dumb ass:
public void push(String str)
          Node newTop = null; // newTop is null
          newTop.item = str; // Line 14; it's still null here.
          newTop.next = top;
          top = newTop;
     }Set newTop to point to a non-null Node.
%

A genious needed to figure out this code!!!!!

i have three points in the following code which i can't work it out
import java.awt.*;
import java.awt.event.*;
import java.applet.* ;
public class Hangman extends Applet implements ActionListener, ItemListener
/* problems
* 1) should replace all occurences of letter not just 1
* 2) no of guesses should not be allowed to be <0
* 3) win/lose message should be in color
// CONSTANTS
private static final int EASY = 0;
private static final int MEDIUM = 1;
private static final int HARD = 2;
private static final int BEGINER = 9;
private static final int INTERMEDIATE = 8;
private static final int ADVANCED = 7;
private static final int ANSWER = 26;
private static final int RESET = 27;
private static final int STRING_NOT_FOUND = -1;
private String[][] WorkingArray = new String[][]{
new String[]{"CAT","WREN","MOUSE","GERBIL"},
new String[]{"ROSE","GRASS","WILLOW","RAGWORT"},
new String[]{"SHIRT","JACKET","SANDALS","TROUSERS"}
private Button[] Keys = new Button[28];
private CheckboxGroup Diff = new CheckboxGroup();
private Checkbox[] Levels = new Checkbox[]{
new Checkbox("Beginner",true,Diff),
new Checkbox("Intermediate",false,Diff),
new Checkbox("Advanced",false,Diff)
private Panel Keypad = new Panel(new GridLayout(4,7));
private Panel P = new Panel(new FlowLayout());
private Label Title = new Label("Guess The Word");
private Label Prompt= new Label ("Guesses Remaining");
private TextField Word =new TextField(24);
private TextField Message = new TextField(24);
private TextField Guesses = new TextField(3);
private String LongWord = " ";// Long Word
private String ChaGuess = " ";// Guessed Charactor
private String s = " " ;
private int[] Level_Values = new int[]{9,8,7,} ;
private int Pos = 0 ;
private int LPos = 0 ;
private int NoOfGuesses = 9;
private int NoOfChars = 0 ;
private int WordLen = 0 ; // length of current word
private int ArrayIndex = 0;// Array, currently in use
private int ElementIndex = 0;// element, currently in use
public void init() { // build gui and register components for events
this.add(Title);
this.add(Word);
this.add(P);
this.add(Keypad);
this.add(Message);
// add radio buttons to gui and register for events
for (int x = 0 ; x < Levels.length ; x++){
Levels[x].addItemListener(this);
this.add(Levels[x]);
public void start (){
validate();
public void stop(){
invalidate();
public void destroy(){
public void actionPerformed( ActionEvent Click){
int LastPos = 0 ;
try { // handle button events
if (Click.getSource() == Keys[RESET]){
// Hide Messages and clear TextFields
Message.setVisible(false);
Word.setText("");
LongWord = " " ;
// Enable Letters
for (int x = 0 ; x < RESET ; x++){
Keys[x].setEnabled(true);
}// for
// Get Word to Display
ElementIndex = (int)(Math.random()*4); // random no between 0 - 3
WordLen = WorkingArray[ArrayIndex][ElementIndex].length();
NoOfChars = WordLen ;
for (int x = 0 ; x < WordLen; x++){
LongWord = LongWord +"-" ;
} // for
Word.setText(LongWord);
NoOfGuesses = Level_Values[ArrayIndex] ;
Guesses.setText(LongWord.valueOf(NoOfGuesses));
} // if
else if (Click.getSource() == Keys[ANSWER]){
Word.setText(WorkingArray[ArrayIndex][ElementIndex]);
Guesses.setText(" ");
// Disable Letters
for (int x = 0 ; x < RESET; x++){
Keys[x].setEnabled(false);
}// for
}// else if
else{
//event came from a letter
// get object from awt.event, cast to button to use label
ChaGuess=( ((Button)Click.getSource()).getLabel() );
LPos = WorkingArray[ArrayIndex][ElementIndex].indexOf(ChaGuess) ;
Pos = WorkingArray[ArrayIndex][ElementIndex].lastIndexOf(ChaGuess);
if (Pos == STRING_NOT_FOUND){
--NoOfGuesses ;
Guesses.setText(LongWord.valueOf(NoOfGuesses));
if (NoOfGuesses == 0 ) {
Message.setVisible(true);
Message.setText("You Lose");
} //if
else {
if (LPos == Pos){
LongWord = (LongWord.substring(0,Pos )
+ ChaGuess + LongWord.substring(Pos+1,WordLen));
--NoOfChars;
LastPos = Pos ;
else {
LongWord = (LongWord.substring(0,Pos )
+ ChaGuess + LongWord.substring(Pos+1,WordLen));
--NoOfChars;
Pos = WorkingArray[ArrayIndex][ElementIndex].indexOf(ChaGuess,LPos+1) ;
if ( Pos != STRING_NOT_FOUND) {
LongWord = (LongWord.substring(0,Pos )
+ ChaGuess + LongWord.substring(Pos+1,WordLen));
--NoOfChars;
Word.setText(LongWord);
if (NoOfChars == 0 ) {
Message.setVisible(true);
Message.setText("You Win");
}// end of try block
catch ( Exception E ){ // catches all exceptions
finally {
invalidate(); // mark window as needing to be redrawn
validate(); // redraw window
} // actionPerformed
public void itemStateChanged(ItemEvent Check){
// handle checkbox events
if (Diff.getSelectedCheckbox() == Levels[EASY]){
ArrayIndex = EASY ;
else if (Diff.getSelectedCheckbox() == Levels[MEDIUM]){
ArrayIndex = MEDIUM ;
else if (Diff.getSelectedCheckbox() == Levels[HARD]){
ArrayIndex = HARD ;
Guesses.setText(s.valueOf(Level_Values[ArrayIndex]));
invalidate();
validate();
public Hangman() {
char Tit = 'A';
String ButtonTitle = "A" ;
// construct keyboard and register for ActionEvents
for (int Cnt = 0;Cnt< Keys.length ; Tit++, Cnt++){
ButtonTitle = ButtonTitle.valueOf(Tit);
Keys[Cnt] = new Button(ButtonTitle);
Keys[Cnt].setEnabled(false);
Keys[Cnt].addActionListener(this);
Keypad.add(Keys[Cnt]);
Guesses.setText(ButtonTitle.valueOf(NoOfGuesses));
Guesses.setEditable(false); // make TextField ReadOnly
Word.setEditable(false); // make TextField ReadOnly
Message.setVisible(false);
P.add(Prompt);
P.add(Guesses);
Keys[ANSWER].setLabel("Answer");
Keys[RESET].setLabel("Reset");
Keys[RESET].setEnabled(true);
}// Hangman1
you help is appreciated

You do not need a genious man! You just need somebody who is willing to do your work :)

Trying to figure out this error

I have a Flex website that I created and I'm getting the
following error when I try to call to my ColdFusion RemoteObjects:
[RPC Fault faultString="Send failed"
faultCode="Client.Error.MessageSend"
faultDetail="Channel.Connect.Failed error
NetConnection.Call.Failed: HTTP: Failed: url: '
http://reevespro.com/flex2gateway/'"
I haven't a clue where or to fix. And I have no idea why it's
trying to call flex2gateway, the directory doesn't exist. Anyone
have a clue?
Thanks

Hi,
If you are using the ColdFusion adapter for BlazeDS/LCDS,
please open remoting-config.xml and see which channel your Remoting
destination is using. In services-config.xml, you should be able to
find channel used above configured. You should be modifying the end
point URL of the channel.
Hope this helps.

Why cant I figure out this WRT54GS???!!

Similar Messages

Maybe you are looking for