Why cant I import my Nikon D800E NEF files - just started recently - "unable to copy a file"

Why cant I import my Nikon D800E NEF files in LR 4.3 - just started recently -I have been doing the same thing for months and never had a problem. "unable to copy a file to location"

Thanks, but no I do have plenty of space. What I just did was to move the NEF files off of my card and into the location I wanted them. I then just did an import move to the same location. This is just all very odd because it always had worked fine in the past. I do appreciate you trying to help.

Similar Messages

  • Why CS6 cann't open Nikon D800E NEF raw file?

    Why CS6 cann't open Nikon D800E NEF raw file?

    The Nikon D800 was supported from ACR version 6.7 / 7.1. But CS6 shipped with 7.0, so if you've never updated ACR (or reinstalled from disc), they won't open.
    Other than that - have you used an older version of Nikon Transfer or View NX? These will corrupt the NEF header so that ACR can't read them.
    There's a fix here: http://owl.phy.queensu.ca/~phil/exiftool/fix_corrupted_nef.html

  • Why cant i import ringtone?

    why cant i import ringtone?

    Maybe it is just to long. You can import ringtones up to 40 sec. If it's longer, it will appear in iTunes but not on your iPhone.

  • Why won't Lightroom 4.4 import my Nikon D7000 NEF RAW files?

    Why won't Lightroom 4.4 import my Nikon D7000 NEF RAW files?
    I even downloaded the latest Adobe DNG converter and converted all the NEF files to DNG then tried to import to lightroom - it didn't even recognise them??? What the...

    Keith_Reeder wrote:
    It's not a "wrong" error message - it's true, as far as it goes, and it's completely unrealistic to expect error messages to be fully diagnostic - they're a starting point.
    Not wrong?
    Let us have a look at the error message:
    "The following files were not imported because they could not be read"
    This clearly gives the user the impression that there is a reading error where you want to copy the files from. Is that the actual error?
    No, the actual error is that the file could not be written at the destination.
    It is possible that it is not factually wrong because Lightroom first make a failed copying attempt without giving an error message, then still assumes that the files have been copied and tries to import them, and THEN makes a failed import attempt from the destination and gives the error message. But that would never be anyone's first guess when they experience that error message.
    A much better error message would be: "The following files were not imported because they could not be copied to the destination folder."

  • Why cant i import Canon CR2 RAW pic into iPhoto?

    Anyone know why cant I import Canon CR2 RAW pic into iPhoto???

    Although all Canon RAW files are are suffixed CR2, they are not all the same. In fact, each model of Camera produces a different RAW. What camera do you have? Is it in the Supported List?
    http://support.apple.com/kb/HT1475
    Have you applied all the Camera RAW updates?
    Regards
    TD

  • Why cant I open D90 and D70 NEF files in photoshop7?

    Why cant  I open D90 and D70 NEF files in photoshop7?

    I suppose you are using Photoshop Elements 7 ?
    If so, you may have a problem similar to the one in this thread :
    http://forums.adobe.com/message/5565719#5565719

  • Edit in Photoshop CS6 doesn't work with Nikon D800E NEF files in LR 4.1 RC

    The "Edit in Photoshop CS6" menu item or shortcut (cmd+e) doesn't work for NEF files from a Nikon D800E in Lightroom 4.1 RC.  What happens is that LR looks like it goes through all its normal paces, and launches Photoshop, and the CPU spins, but then nothing happens in Photoshop, the image never opens.
    This works fine for NEF files from other cameras.

    Set up CS6 as an secondary editor, and then it will use LR's built-in ACR to process the files, instead of the external ACR with CS6. The external ACR 6.7 also processes D800, just not ACR 7 just yet.
    Bob Frost

  • Why cant i import my movie into iMovie?

    Ok so i am doing this school project and i recorded some film on my camera and then i imported the movies into iphoto. so my plan was to take those movies and move them into imovie.. but when i go to import, and i go to where my movies are, the computer wont let me physically press the movies so that they are highlighted. i kinda need to know why it wont let me import these movies b/c i need these movies to finsh my school project which is due nxt week. thanks so much!

    i kinda need to know why it wont let me import these movies b/c i need these movies to finsh my school project which is due nxt week. thanks so much!
    Since you clips were imported to iPhoto, I assume they were recorded on a digital camera which may use and number of audio and video compression formats. Since a file must contain "edit" compatible formats to be imported by iMovie '08, if the audio and/or video is incompatible, the file will not import. So, the first step is to open your clip in the QT Player and check the "Inspector" window to see what compression formats they contain. Once you know that, you can determine how best to convert the incompatible format(s) to compatible ones.

  • HT2688 why cant i import with home sharing?

    i have set up home sharing on 2 windows laptops but the import button is not active??? its very frustrating coz my partner has things on her i pod i want. please help thanks

    Why do you need to import via HomeSharing, simply copy the files from one comptuer to another.

  • TS2446 why cant i purchase any of this app , i just redeem my accounts .. =(

    please i need help ..
    i just purchased $100 to my account , but why cant i use it , if i cant use it then why when i redeem there is no notification that tells i have a log in info ,
    what a bummer ..
    i can redeem it but i cant use it ..
    please give me the solution
    best regards,
    Regi Fiandisa

    Check the App Store and see if the app is updated to work with iOS 7 because while it is obviously running in iOS 7, it may not be updated for iOS 7.

  • Why when i connect my phone to my laptop do my recent photos load as image files and not jpeg

    why is it that when i connect my phone to my laptop my recent photos load
    as image files and not jpeg as they used to.Is this another issue with ios 8

    Thank you. I did that and made sure my phone was open to the camera roll. I was able to locate the import command and the photos appeared. Thanks so much!

  • Why do I get a CATCHA code every time I try to send an e mail-just started recently

    why do I get a CATCHA code every time I try to send an e mail on safari-just started recently

    It's likely that AT$T is recognizing that version of Safari as not compliant with their anti-spam or security requirements for their webmail application. Assuming you are running OS X "Snow Leopard" that Safari version is the latest one. That's annoying because I am not aware of any noteworthy security improvements in subsequent Safari releases, and AT$T ought not to treat it any differently.
    Your alternatives are to upgrade your Mac's operating system, which has certain minimum hardware requirements, or simply use your Mac's Mail application. Or, just use Firefox when you want to use webmail. Otherwise you'll have to put up with their silly Captcha annoyances.
    To add your AT$T email account to Mail, start here: http://www.apple.com/support/macosx/mailassistant/
    To upgrade OS X start here: http://www.apple.com/osx/how-to-upgrade/

  • Why cant I import M4V or FLV files into my I-Movie video? Please HELP!

    I just got the new Mac Desktop and REALLY hate that I cant drap and drop videos into the newer (i-Life11) -Imovie like I was used to since 2010. Seems to only work for photos. Is there a way around that?
    So I am making a church youth group video where I have spent HOURS trying to get parts of Youtube videos into the video to show them.  I have 2 forms saved on my desktop thanks to the software -   i have a FLV video and a M4V - both converted.  The Imovie already has plenty of clips that are M4V in them so I know it will take that form.  It just wont let me import them..they are there but are not accesible (they are 'faded') under the File/Import/Movies/Desktop  or File/Movies/RealPlayerDownloads.  They aren't darkened and  and I cant do anything with them.
    What am I doing wrong?
    HELP please.   Thanks for input. 
    Frustrated volunteer who has spent too many hours on this!!!
    Keri

    Use MPEG Streamclip to convert them to DV. In the case of the FLV file, this requires installing Perian.
    (71091)

  • Nikon D800E NEF to see...

    After several days of painful surfing around the topic, I understood that
    - Photoshop 5 with an updated Adobe Camera Raw 6.7 won't open D800 NEF files IF they were downloaded via Nikon Transfer because
    - probably Nikon Transfer corrupted the files.
    Now, the question is what to do with these files if once downloaded this way???
    Thanks,
    Zoli

    Thanks Jim,
    DNG didn't work either. I also used ViewNX to convert NEF to TIF but as you wrote this is not the best solution. However, I could see the pictures at least...
    But! I've just found a nice solution and I can now recommend it for everyone who will face the same stupid problem: http://owl.phy.queensu.ca/~phil/exiftool/fix_corrupted_nef.html
    Here you can find a software to fix Nikon Transfer's corruption, it worked to me, and this is great!
    Zoli

  • Why cant I import mp3s

    I have a cd with about 100 mp3s on it that I cant seem to import onto itunes. The cd doesnt show up at all in the source window and when I go to import, it cant find the files on the cd to import, even though they are definitely on the cd. How do I import them? They are all mp3 files.
      Windows XP  

    Try File > Add To Library...

Maybe you are looking for

  • Macbook Pro 13" Screen Distortion and Flickering

    Hi Guys, please help me if you can, got this problem where the screen keeps flickering and distorting... got a couple of videos here, need some help!. http://www.youtube.com/watch?v=3k5Dqj1KlnY http://www.youtube.com/watch?v=XhthT9XHIus&feature=chann

  • ***Cant Scroll through fonts using arrow keys

    when trying to preview different fonts in AI i am unable to scroll through them using the arrow keys, it just doesnt move... can anyone tell me whats wrong? im sure its pretty simple but i have no idea how to fix it...if it can be fixed... oh im usin

  • SAP for i5 in Italy

    Hi to everybody, I'm looking to sameone in Italy that could help me to understand when is reasonable to install SAP on i5. And, if possible, let me take a look to it!!! Thanks to all could answer me. Regards and ciao Mauro Toso

  • IPv6 autoconfigured address breaks curl

    I get error messages when upgrading packages from AUR using yaourt like this: curl error: Couldn't connect to server Turns out that just running curl gives this: $ curl http://aur.archlinux.org/ curl: (7) Failed to connect to aur.archlinux.org port 8

  • Firefox 4 Deployment with customized user settings?

    Hi folks, I want to deploy FF 4.0 with customized user settings, but where is the "localized" folder for my prefs.js file? In FF 3.6.x we've extracted the setup.exe file and with sources we deployed our customized firefox. Now in FF 4.0 there are som