Why cant i print my e print report

why cant i print my settings for eprint.im connected to a network.it will not register the printersemail address

Hey dciciarelli!
Sorry to hear you're having a problem! What kind of printer do you have and what error message are you getting? In the mean time, here are some general things you can try. Power cycle your printer by unplugging it for about 30 seconds and then plugging it back in. If that doesn't work, try manually printing the page. This can be done either by going to Setup->web services->Printer email address, or by going to the ePrint button on the touchscreen and selecting print report/information page.
If you tell me the model of printer I can provide you with more detailed assistance.
Hope this helps!
If I have solved your issue, please feel free to provide kudos and make sure you mark this thread as solution provided!
Although I work for HP, my posts and replies are my own opinion and not those of HP.

Similar Messages

How to develop/print a report wider than 8.5 inches, why cant we landscape

Hi All Gurus,
I am new to Oracle Reports. I have a problem, I have a report that has rows longer than normal A4, A5, A6 paper width, so report lines either tend to go on next page or on next line of the same page. Also Oracle Report is not allowing me to print report in landscape mode, why this limitation ? I am wondering, cuz in older character based tools (Foxpro, Informix-4GL), we could easily print wider reports on a line printer which always had a capacity of 132 characters (and in condensed mode, 224 characters). So only small (and very simple) reports were printed on regular paper of 80 characters (8.5 inches wide), but for almost all real use reports we were able to use 132 (224 in condensed) characters paper.
How can we do this ith Oracle GUI report builder?. Why are we limited to 80 character paper size? why cant we print report in landscape mode? It is not, in any case, allowing me columns that go beyond 80 characters (8.5 inches) on a line. If this is an Oracle limitation, I would say Oracle Reports cannot be used for actual reporting, it is just a fancy with GUI and colors!!!!!
Can anybody answer my questions? please tell me an immediate solution.
Thanks in Advance

You can go to Object Navigator, under Layout Model, click the Main Section icon to open the property, change to Width from 8.5 to 11 and Height from 11 to 8.5. Do the same for Header/Trailer Sections if needed.
At report printing, choose Landscape Orientation.
DC

Why cant i print from my ipad using airport express but i can print from my mac using the express

why cant i print from my ipad using airport express but i can print from my mac using the express

Because your printer has to be Airprint compatible and connected to WiFi. There are applications, such as Printopia, that will allow you to print through your computer.

Trying to print from Macbook 10.4.11 using Brother DCP-J125 printer from usb getting messagge on screen The process " Ratsterobrother 145 " terminated unexpectedly on signal 5. Why cant I print from computer?

Trying to print from Macbook OS X 10.4.11 computer to a newly purchased printer which is a Brother DCP-J125 connected through USB.
When I try to print Iget a message saying : The process " Rasterobrother 145 " terminated unexpectedly on signal 5. What does this mean? Why cant I print? What does this message mean? Is it from my computer or from my printer?
Any help or advice would be appreciated.

Trying to print from Macbook OS X 10.4.11 computer to a newly purchased printer which is a Brother DCP-J125 connected through USB.
When I try to print Iget a message saying : The process " Rasterobrother 145 " terminated unexpectedly on signal 5. What does this mean? Why cant I print? What does this message mean? Is it from my computer or from my printer?
Any help or advice would be appreciated.

Why cant i use air print with my hp deskjet 3050

why cant i use air print with my hp deskjet 3050

The HP Deskjet 3050A J611 is AirPrint compatible.
If it is not working for you, try restarting your router as well as the printer. Power them down, wait a moment or two, then power them back up again. It should work.

Why cann't my application print my report?

My Labview programe can work well until I use the tool "Building a Stand-Alone Application or Shared Library" .I want to change my program to be a *.exe file. The matter is that my printer can not print the report.what can I do?
I use Labview 6.02.
I am hunger for your answer.

Hi.
I experienced almost the same problem. I could run and print report on my computer with FDS Labview 6.0.2, but after distribution of stand alone application I received error message: "oleautomg.cpp line 364" and no printed report. I am using W98 on both computers.
I contacted NI, but they did not give me any useful advice. So I temporarily solved this problem by creating Excel report with minimized window, so user does not see anything on the screen. I am still looking for solution to work through normal report. On my opinion application builder does not pick up some *.dll that is necessary to print standard report.
Hope you will find some good solution and post it in here.
Good luck,
Peter.

Why cant I print a pdf file?

I can no longer print a pdf file. I cannot figure out what the problem is. How can I check to make sure Adobe and Reader downloaded and installed correctly?

Please provide some details: operating system, Reader version, online PDF? Browser? Error message?
You write "a PDF"; so it's only one PDF you cannot print? Is printing allowed in the document properties?

Report intermittently not printing in HP printer

Hi All,
We are currently facing an issue printing a report in HP printers.
We have a report developed in oracle report 6i and this report is in pdf format and registered in oracle apps 11.5.4.
There are few occassions where running this report (thru concurrent manager) doesn't print to HP printers but the concurrent program finishes successfully (completed - normal in view concurrent request) and the log says that the program has been executed successfully without error and output is being printed on the printer but in contrary nothing is actually printed.
The output is being produced and can be viewed in the view concurrent request screen and when you reprint it still nothing appears on the printer.
We just notice that the HP printer flashes its lights, as if something is being printed, and finishes with nothing on the printer as well as in the printer server queue.
Please note that this behaviour is intermittently happening in HP printer but not in other printers. Before, we are using Lexmak printer and this problem is not being encountered.
Has anybody faced similar issue with HP printer before? or anybody could give us a hint on why this is hapenning?
Any thoughts would be greatly appreciated.
Brett
brettcowie

Hello andreatf, and welcome to the HP Forums, I hope you enjoy your experience!
I see you are experiencing ink issues. I would like to help.
I would recommend performing a power reset. Disconnect the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug the printer back in. Ensure you plug the printer directly to a wall outlet. Make sure to bypass any sort of surge protector or power bar.
I would also recommend following the steps in this document on Troubleshooting Print Quality Issues.
Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

Printing of XML publisher report

Hi All,
This is in regards to the printing of XML publisher report in Oracle E-Business Suite.
we have a XML Publisher report in Oracle EBS,which generates the output in PDF without any issues. But the same output is printed in XML Tags when it goes to the printer.
Can you please throw some light why this is happening only for this particaular report,other XML reports in the system does not have this problem.
Thanks in Advance for your help.

I do not think it is possible to send all the pages to one tray and send only the last page to a different tray. However, you may review the following notes:
Note: 357402.1 - How to Print the Output to a Different Paper Size Using XML Publisher Delivery Manager?
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=357402.1
Note: 394130.1 - How To Enable Printer Options Such As Duplex Printing Or Tray Selections For Bitmap Concurrent Programs
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=394130.1

REPORT VIEWER- PRINT BUTTON- NOT PRINTING ONLY IN SOME MACHINES

I built a project in VS2008(VB.Net) and it uses RDLC reports...When ive published my software i tried and it works fine and can print successfully on my machine but when i tried on the target machine i can export to pdf but i cant print the files directly
using the print button on the report viewer...What is the problem? Thanking you in advance.

Hello,
Which browser did your used in the target machine? The issue may happens when you use none-IE browser.
The ClientPrint control of the Report Viewer control is based off of ActiveX and is not designed to work in none-IE browsers. This is a known issue in Report Viewer control.
To workaround this issue, you can try to use custom control or ActiveX control to get the print option enabled for the Report Viewer.
Reference:http://www.codeproject.com/Questions/608046/Reportplusviewerplusprintplusbuttonplusisplusnotpl
Regards,
Fanny Liu
Fanny Liu
TechNet Community Support

Print Button of SSRS report is not display report in IE11

Hello All,
We are running on SSRS 11.0.0.0, .net framework 4.5, SQL server 2012.
Everything is working fine in IE9, IE10, now our client has updated their browser to IE11. In IE11 the print button in SSRS report is not showing. We have tried browser file,
it will show print button in IE11 but it is not functional. we have also tried to change browser mode to IE 10 or IE 9 (using <meta http-equiv="X-UA-Compatible" content="IE=8" />) but it didn't work in IE 11.
Some forum suggested to change framework to 4.5.1 but i
cant change framework now. so please suggest some alternatives to achieves the functionality.

Hello Pinakin,
I recommend that you post your question in SSRS or IE related forums.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Lion 10.7.5 cant connect to printer via Buffalo print server

Hi everyone,
I'm at my wits end with this one having spent over 20 hours on it.
I have a Macbook Air running Lion 10.7.5 and a Macbook running OSX 10.6.8. I have a Photosmart 8050 printer attached to a Buffalo Linkstation Live LS-CH1 running firmware 1.60 (the latest version for this model). The Linkstation has a printserver which is attached via USB to the printer, the Linkstation is attached to a wireless router, for amound other things, wireless printing.
The long and the short of my problem is, I can get the Macbook running 10.6.8 to print without a problem, works fantastic, but I can not get the Air running 10.7.5 to print through the print server even though the printers are installed the very same way on both machines. The error from the print que is "unable to connect to printer" even though it seems to connect successfully to the Linkstation, as in my setup a username and password must be entered to access the printer, even though a user is logged in to the file server. Not to get confused, I am 99% convinced the problem is with the Macbook Air running 10.7.5.
I installed the printers using the Windows method, Workgroup -> Linkstation -> Printer then selecting the HP 8000 series driver version 5.0.4. I have also tried every other install method available, however as I understand it, this is the recommended method for this print server setup.
I have checked the network setup, driver versions and even though it does not seem to cover my printer have GutenPrint 5.2.9 installed.
The printer does work when connected directly to USB however.
If anyone has any idea why I cant get the Macbook Air running 10.7.5 to print via the print server on the Linkstation when 10.6.8 works perfectly, then please HELP!
Thank you

Power Cycle
Power off the router. Unplug it from the wall. Wait for few minutes.
Connect the router back to to the wall.
Power the router back on. Wait until all lights are lit properly. It will take a while.
Restart the computer.
Start up in Safe Mode.
http://support.apple.com/kb/HT1455

Printing of Character Mode Reports on 3 tier on Dev 6i

Has anyone done character mode printing of reports on Dev6i? We are facing problem of REP: 3002. We have already loaded Orarrp on server and client and also tried changing the service property from log on as System Account to Log on as Administrator and also vice-versa, but nothing seems to work.
Any help will be appreciated.
Plz repond to email: [email protected]
B.Suryaprakash

The first thing to do is to make sure that you can print a character mode report on the server box just using the rwrun60 executable.
If you can do this then you should take a look and make sure that the user that's started the reports server has access to the printer that you're trying to print to (you seem to have changed from the localsystem log on to Administrator, but are you sure that Administrator can access those printers).
I think that orarrp is a red herring here - and I'm not sure why you're trying to set it up.
Hope this helps,
Danny

Cannot print to XPS when report contains sub-reports

I've got a simple .NET app that generates a Crystal Report based on data being pulled from a SQL database. The report itself contains 3 sub-reports.
I've found that I cannot print the complete report to the Microsoft XPS Documet Writer. Whenever I try, I get the following messages after clicking Save. Note that one message consistently occurs:
Crystal Report Windows Forms Viewer
The operation was canceled by user
OK
Further testing has uncovered that if i click on any of the sub-reports within the viewer I can print without issue.
Has anyone seen this before?

Don,
Thanks for your reply. They are not OnDemad sub-reports, and unfortunately I do not know how to set the log on for each report. However, I do believe I've found the cause of this issue...
The report I'm having problems with is a check report that uses a MICR font. If this particular font is displayed on the main report, either as an object on that main report or on a sub-report, the print to XPS will fail. What's interesting is that if the font is in the sub-report and I print just the sub-report itself, the print completes without error.
I'm not sure whether this is a Crystal error or an issue with the XPS driver. Either way, I believer we will be looking for another font to use. But, it would be helpful to know why this happens.
Thanks
Kyle

Printed XML Purchase Order Report - Printing blank Blanket PO page

Hi,
When printing the xml report of a Blanket PO Release, the release lines and headers print first but the last page is a page for the primary blanket PO (PO Num without any releases attached). This page does not contain any information in the header or line fields therefore it is a waste of paper. Looking into the XML code the blanket PO page is pulled in the same manner as the Release lines, against G_Headers. I'm going to look into the Reports Developer SQL to see if I can find something but I would rather not mess with the configuration of the SQL if I did not have to.
Any ideas on how to get rid of this extra unnecessary page?
Thanks,
-Steve

Hi,
RDBMS : 11.2.0.1.0
Oracle Applications : 11.5.10.2
OS: Unix
The issue can be reproduced.
The report in question has had customization but the blank page prints in the Printed Purchase Order Report(Portrait) seeded function as well. From what I see the SQL might be able to modified based off of the input paramet "Print Blanket PO". When this is selected "No" the Blanket header is printed with no lines (that's where the blank PO page is coming from). When selected Yes the blanket header with all the blanket lines are printed. So I may be able to go in and change how that input parameter changes the output, unless there is a better way.
-Steve

Why cant i print my e print report

Similar Messages

Maybe you are looking for