Why cant I send an email with my iphone4 using bellsouth?

Anyone know why I cant send an email anymore with the iphone4 using the bellsouth email?

I have a bellsouth, yahoo, gmail, and work account. Last time I went into the apple store they updated it with the cwmx.com that they were using and few months that dropped. Then I searched around and found the AT&T SMTP server that was working fine and now its down. Is there a way to convert the bellsouth account without having to send all my contacts the famous email "I have changed email accounts"?

Similar Messages

Why cant i sync me iphone with my labtop using wifi keeps saying "ADMIN- PC"?

Why cant i sync me iphone with my labtop using wifi keeps saying "ADMIN- PC"?

Make sure you are logged in as the admin on the laptop, not another user account.

Sending an email with text Content using SMTP Adapter.

I am trying to send an email Message with the .txt attachment using SMTP adapter. I am getting an XML input and I am mapping the input Schema to Flat File Schema. I am trying to Send this Flat File(.txt attachment) in the Email. But I am receiving it as
HTML format only.
The Expression in the Message Transform is,
     SMTPUtils.Part.SetContentType(OutgoingFlatFile_Msg.BodyFlatFile,"text");
     OutgoingFlatFile_Msg(SMTP.EmailBodyTextCharset)="UTF-8";
     DynamicEmailPort(Microsoft.XLANGs.BaseTypes.Address) = "mailto:[email protected]";
     OutgoingFlatFile_Msg(SMTP.CC) = "[email protected]";
     OutgoingFlatFile_Msg(SMTP.Subject) = "TESTMAIL";
     OutgoingFlatFile_Msg(SMTP.From) = "[email protected]";
     OutgoingFlatFile_Msg(SMTP.SMTPHost) = "smtp.org";
     OutgoingFlatFile_Msg(SMTP.SMTPAuthenticate) = 0;
The Email attachment is HTML format,
<?xml version="1.0" encoding="utf-8"?><ns0:Root xmlns:ns0="http://SampleSMTPEmail.OutgoingFlatFile"><Record><CustomerID>Cus001</CustomerID><OrderID>Ord001</OrderID></Record></ns0:Root>
How to attach the .txt file to the email.

Have you tried the following steps:
Create the message (“msgEnvelope”) as a Multi-Part message, with the required message in the Message Body Part (“Attachment”)
Set the following properties of the Envelope Message:
msgEnvelope(SMTP.Subject) = <Email Subject>;
msgEnvelope(SMTP.From) = <Sender Email>;
msgEnvelope(SMTP.SMTPHost) = <Email Host name>";
// This is the default value
msgEnvelope(SMTP.SMTPAuthenticate) = 0;
// Set the message text included in the email
msgEnvelope(SMTP.EmailBodyText) = <Text in body of email>;
// Important - This is required if the EmailBodyText is set
msgEnvelope(SMTP.EmailBodyTextCharset) = "utf-8";
// A value of '1' means include Message Body Part as email attachment
msgEnvelope(SMTP.MessagePartsAttachments) = 1;
Set the following properties of the Message Body Part (“Attachment”):
// Important - Change this MIME type if not sending a Text file
msgEnvelope.Attachment(Microsoft.XLANGs.BaseTypes.ContentType) = "text/plain";
// Set the Filename of the attachment
msgEnvelope.Attachment(MIME.FileName) = <Physical name of the attachment>;
Set the following property on the Dynamic Send Port:
// We set the Email Address on the Port itself
Dynamic_Send_Port(Microsoft.XLANGs.BaseTypes.Address) = <recipient email address>;
http://biztalktalk.wordpress.com/2008/08/28/sending-attachments-through-a-dynamic-send-port/
If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.

How to send an email with an attachment using webdynpros

Hi Friends,
i have a table and a toolbar button (send) when i click on that button i have to send an email for the selected row from the table with an attachment. please let me know step by step in detail.
Thanks,
Mahesh.Gattu

Hi Mahesh,
I observed one thing that the mail was waiting in the system. In SCOT transaction we can see that the mail was waiting.
And also we need to add one more parameter to the function module call i.e.       commit_work                = 'X'
After adding this parameter also in my scenario the mail was in waiting state in SCOT transaction.
In Scot transaction, i have created a job sheduled for the INT, selected varient INT and set the peroid 1 min.
After performing this, the mail functionality was working in my application.
Sample code:
METHOD onactionsend_mail .
For API
DATA: ls_maildata TYPE          sodocchgi1,
        lt_mailtxt TYPE TABLE OF solisti1,
        ls_mailtxt TYPE          solisti1,
        lt_mailrec TYPE TABLE OF somlrec90,
        ls_mailrec TYPE          somlrec90,
        sent_to_all TYPE          sonv-flag.
DATA: l_current_controller TYPE REF TO if_wd_controller,
        l_message_manager    TYPE REF TO if_wd_message_manager.
ls_maildata-obj_name = 'Test mail Subject'.
ls_maildata-obj_descr = 'Test mail Description'.
ls_maildata-obj_langu = sy-langu.
ls_mailtxt-line = 'Test mail Subject 2'.
APPEND ls_mailtxt TO lt_mailtxt.
CLEAR ls_mailtxt.
ls_mailtxt-line = 'Test mail Description 2 '.
APPEND ls_mailtxt TO lt_mailtxt.
ls_mailrec-receiver = '[email protected]'.
ls_mailrec-express   = 'X'.
ls_mailrec-rec_type = 'U'.
APPEND ls_mailrec TO lt_mailrec.
CALL FUNCTION 'SO_NEW_DOCUMENT_SEND_API1'
    EXPORTING
      document_data              = ls_maildata
      commit_work                = 'X'
    IMPORTING
      sent_to_all                = sent_to_all
    TABLES
      object_content             = lt_mailtxt
      receivers                  = lt_mailrec
    EXCEPTIONS
      too_many_receivers         = 1
      document_not_sent          = 2
      document_type_not_exist    = 3
      operation_no_authorization = 4
      parameter_error            = 5
      x_error                    = 6
      enqueue_error              = 7
      OTHERS                     = 8.
IF sy-subrc <> 0.
ENDIF.
ENDMETHOD.
You can also refer the thread (regarding email was waiting) Re: email status waiting.
Best regards,
Suresh

Send email with multiple attachments using MS outlook

Hi,
Is it possible to send an email with multiple attachments using MS outlook. (Using activex)
Regards,
Neha

nehrnul wrote:
Hey thanks for the reply. I'll try that way also.
but currently my requirement is to send email using MS Outlook. And I found 1 solution using invoke node
Regards,
Neha
That' "requirement" sounds like it was written by someone who is trying to drive the design of the application. Without knowing your personal situation it's hard for me to say, but if I had to guess I would say the real requirement is to send an email with multiple attachements, and the person giving that requirement thought sending it through Outlook would be the best way. You should get clairification on what the real intend of that requirement is.
Unofficial Forum Rules and Guidelines - Hooovahh - LabVIEW Overlord
If 10 out of 10 experts in any field say something is bad, you should probably take their opinion seriously.

Why can I not attach a document to an email? Every time I want to send an email with a document attached to it, an error notice pops out. It tell me that the file is being used even when it is not. How can I fix this issue?

Why can I not attach a document to an email? Every time I want to send an email with a document attached to it, an error notice pops out. It tells me that the file is being used even when iall other programs are closed. How can I fix this issue?

Thanks Jeff, I was not aware that a template could be multi-page. (All the existing templates were 1 page)
But it worked, saving me some steps. When I was finished I renamed the document, and locked it.
Then tried to save it but could not because it was locked. I closed it, went to my Spread Sheet Folder ,
to find it, it was not there. The Finder could not find it either.
So I start over again.
I opened up Numbers and it showed my personal Numbers template folder, it contained both my new
original 4 page template and the vanished saved document!
I tried to delete the template containing these document data and could not - I had to go to the Library/Application Support/Numbers to physically remove it from this folder. Then I started over again. I Finally found out how to make it work: I can now "save as", and then lock, and it will go to place where I want it to be saved and locked.
The secret is: Click on the document title in the menu bar, and it opens up "Save as...", which works the same as in OS 10.4.11, and you can pick the place you want for saving. Once done that, you can then lock the document in the same pull down menu, and then close it.
I also found later that I can delete a template from its folder, by letting Numbers open the templates,
clicking on the one I want to remove, then go to the "Numbers Menu/File/Move to...", select "Desktop"
and from there the selected template can then be thrown into the Trash from there.
It appears now that the real fault of the Numbers software is that the "Save as" command is not available in the "Edit" or "File" pull-down menus, but hidden behind the title of the document.

On my mac why does it take so long to send a Email with an attachment, on my mac why does it take so lone to send a Email with an attachment

on my mac why does it take so long to send a Email with an attachment, on my mac why does it take so lone to send a Email with an attachment

It depends on the size of the attachment and the speed of your internet connection.
Next time you send an email with an attachment do these two things:
In Apple Mail (I assume you are using Apple Mail), under the Window menu select Activity. Arrange the Activity window so you can see it.
Then open the separate application located in the Utilities folder called "Activity Monitor" and arrange it so you can see it at the same time as the Activity window in Mail.
In Activity Monitor program, select the tab labeled "Network." Watch the "Data sent/sec" portion. Then send your email, while watching the Mail Activity window and also the Activity Monitor program window Data sent/sec area.
You should see the mail being sent with a progress bar in the Mail Activity window and also you should be able to see how many bytes/sec or KB/sec or MB/sec your internet connection is giving you in the Activity Monitor window.
Example: my internet provider gives me about 20 Megabits per second download and 5 Megabits per second upload. To convert these to Megabytes per second (Activity Monitor shows things in bytes, not bits), simply divide by 10 (not the exact thing to do, but close enough). So I get 0.5 Megabytes per second upload speed. When I send a file that is 5 Megabytes in size, it takes about 10 seconds if I am getting the full upload bandwidth. If I am getting less than that (which sometimes happens), it will take proportionately more time. Either way, you can see what is happening with these two windows.
If your internet provider is supposed to give you, say, 5 Megabits/sec upload (0.5 Megabytes/sec), but you see only say, 5 KB/sec (=0.005 Megabytes/sec), sent in Activity Monitor, then your emails are taking a long time because you are getting only abut 1/100 the speed you should be. You might want to check with your internet provider about that.

HT1338 Why when trying to change my apple ID password apple won't send the email with the change instructions?

Why when trying to change my apple ID password apple won't send the email with the change instructions?

There is a contact link.
Apple ID Support

HT201320 Why can i not receive email with my icloud account but I can send it out only

Why can i not receive email with my icloud account but I can send it out only

Hi Nortarian,
The article below will walk you through the troubleshooting steps for email on your iPad:
iOS: Unable to send or receive email
If you are unable to send or receive email, try the following steps:
Restart the iOS device.
Tap Safari and attempt to load a webpage to ensure that the device has Internet access. If you're unable to load a webpage, try the Wi-Fi assistant.
Try an alternative Internet connection.
If your email is provided by your Internet provider, try connecting from the home network.
If your iOS device has an active cellular data plan, try to disable Wi-Fi: Tap Settings > Wi-Fi and turn off Wi-Fi.
If not, try a different Wi-Fi network.
Log in to your email provider's website to ensure that the account is active and the password is correct.
Delete the account from Settings > Mail, Contacts, Calendars and then add the email account again on the iOS device.
Hope this helps ....
- Judy

TS4268 why cant i send imessage with my iphone number

why cant i send imessage with my iphone number,my number is there but I can't click it I can only use my emails

Without more informnation
iOS: Troubleshooting Messages
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting | iLounge Article

I can send tv shows from my ipad to my apple tv without any issues. Why cant i do the same with a movie rental?

I can send tv shows from my ipad to my apple tv without any issues. Why cant i do the same with a movie rental? Or how do i do the same with a movie rental?

Personally I think the iOS devices are poor at reconnecting - Airplay establishes that a link is available but when the iPhone/iPad has been away from the house and rejoins the network i think AppleTV already thinks it's connected with a different IP address and fails to recognise it has joined the network again with new credentials.
Something along those lines anyway.
I find that a combination of restarting AppleTV, router and iOS device tends to fix it, but not for everyone.
AC

Why can't I send an email with attachments?

I've been trying to send an email with a biology review on it so that my mom can print it out but it keeps telling me that I can't send the email. The exact message is "To send this message, delete the current attachments and attach them again." I've done that ad it's still not working and giving me the same message. What do I do??

jo1retired,
Being able to send and receive email on your smartphone is one of the more important pieces to having a phone. We can certainly help you get everything up and running on the phone for you. Have you ever been able to send email from your cell phone? Do you have any other email accounts on the LG phone? Please share some additional information so that we can assist.
CandiceH_VZW
Follow us on Twitter @VZWSupport

Issue in sending the email with XL attachment in ECC version

Hi,
I have an issue with sending the email with XL attachment. My program is sending a mail to the receiver with XLS as attachment. Recently we have migrated from 4.6B to ECC version. Same code was worked in 4.6B.But it is not working in ECC version.When i try to open the attachment, i get a Dialog Box with the following message
"The file is not in a recognizable format.
1. if you know the file is from another program whih is incompatible with Microsoft excel,click cancel,then open this file in its original application
2.If you suspect the file is damaged, click help for more information about solving theproblem.
3.if you still want to see what text is contained in the file, click OK.Then click the text import wizard. "
when i click OK, the excel sheet is opening with all required data.
Can anyone kindly tell me why this is happening.
I am also attaching part of the coding related to this requirement.
*&      Form BUILD_XLS_DATA_TABLE
      text
--> p1        text
<-- p2        text
FORM build_xls_data_table.
DATA: w_total(13),
w_clabs(13),
w_cinsm(13),
w_ceinm(13),
w_cretm(13),
w_cspem(13),
w_cumlm(13),
w_exp_date(8),
w_v_totalp(13),
w_min_rem(8),
w_ersda(10),
w_hsdat(10),
w_vfdat(10),
w_ship_date(10),
w_plnmg(13),
   w_mhdrz(4).
CLEAR: w_total, w_clabs, w_cinsm, w_ceinm, w_cspem, w_exp_date,
w_v_totalp, w_min_rem, w_ersda, w_hsdat, w_vfdat, w_ship_date,
w_plnmg, w_mhdrz.
w_total = it_batch1-total.
w_clabs = it_batch1-clabs.
w_cinsm = it_batch1-cinsm.
w_ceinm = it_batch1-ceinm.
w_cspem = it_batch1-cspem.
w_cumlm = it_batch1-cumlm.
w_cretm = it_batch1-cretm.
w_exp_date = it_batch1-exp_date.
w_v_totalp = it_batch1-v_totalp.
w_min_rem = it_batch1-min_rem.
w_plnmg = it_batch1-plnmg.
w_mhdrz = it_batch1-mhdrz.
CONCATENATE it_batch1-ersda6(2) it_batch1-ersda4(2)
              it_batch1-ersda+0(4) INTO w_ersda SEPARATED BY '.'.
CONCATENATE it_batch1-hsdat6(2) it_batch1-hsdat4(2)
              it_batch1-hsdat+0(4) INTO w_hsdat SEPARATED BY '.'.
CONCATENATE it_batch1-vfdat6(2) it_batch1-vfdat4(2)
              it_batch1-vfdat+0(4) INTO w_vfdat SEPARATED BY '.'.
CONCATENATE it_batch1-ship_date6(2) it_batch1-ship_date4(2)
              it_batch1-ship_date+0(4) INTO w_ship_date SEPARATED BY '.'
CONCATENATE
it_batch1-werks it_batch1-mtart it_batch1-matnr it_batch1-maktg
it_batch1-prdha it_batch1-prctr it_batch1-ktext it_batch1-dispo
it_batch1-charg it_batch1-lgort it_batch1-herkl w_clabs
w_cinsm w_ceinm w_cretm w_cspem
w_cumlm w_total it_batch1-meins it_batch1-v_spr_unit
w_v_totalp it_batch1-waers w_plnmg it_batch1-meins
w_ersda w_hsdat w_vfdat w_exp_date
   w_ship_date w_mhdrz w_min_rem it_batch1-zlifer
   it_batch1-doknr it_batch1-dokar it_batch1-doktl it_batch1-dokvr
           INTO L_STRING SEPARATED BY CON_TAB.
              INTO l_string SEPARATED BY cl_abap_char_utilities=>horizontal_tab.
WHILE l_string <> space.
    CALL FUNCTION 'TEXT_SPLIT'
      EXPORTING
        length       = 255
        text         = l_string
        as_character = 'X'
      IMPORTING
        line         = it_attach
        rest         = l_string.
    IF l_string = space.
   CONCATENATE IT_ATTACH CON_CRET INTO IT_ATTACH.
      CONCATENATE it_attach cl_abap_char_utilities=>cr_lf INTO it_attach.
      APPEND it_attach.
      CLEAR it_attach.
    ELSE.
      APPEND it_attach.
      CLEAR it_attach.
    ENDIF.
ENDWHILE.
move l_string to it_attach .
CONCATENATE it_attach cl_abap_char_utilities=>cr_lf INTO it_attach.
APPEND it_attach.
CLEAR it_attach.
ENDFORM.                    " BUILD_XLS_DATA_TABLE
*&      Form SEND_FILE_AS_EMAIL_ATTACHMENT
      text
--> p1        text
<-- p2        text
FORM send_file_as_email_attachment.
DATA:w_length TYPE i.
DATA: w_cnt TYPE i,
          w_sent_all(1) TYPE c,
          w_doc_data LIKE sodocchgi1,
          gd_error    TYPE sy-subrc,
          gd_reciever TYPE sy-subrc,
          t_attachment LIKE solisti1 OCCURS 0 WITH HEADER LINE.
Fill the document data.
w_doc_data-doc_size = 1.
Populate the subject/generic message attributes
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name = 'SAPRPT'.
w_doc_data-obj_descr = text-034 .
w_doc_data-sensitivty = 'F'.
Fill the document data and get size of attachment
CLEAR w_doc_data.
DESCRIBE TABLE it_attach LINES w_cnt.
DESCRIBE TABLE it_message LINES w_cnt.
READ TABLE it_message INDEX w_cnt.
w_length = STRLEN( it_attach ).
w_doc_data-doc_size =
     ( w_cnt - 1 ) * 255 + STRLEN( it_message ).
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name   = 'SAPRPT'.
w_doc_data-obj_descr = text-034.
w_doc_data-sensitivty = 'F'.
CLEAR t_attachment.
REFRESH t_attachment.
t_attachment[] = it_attach[].
describe the body of the message
CLEAR t_packing_list.
REFRESH t_packing_list.
t_packing_list-transf_bin = space.
t_packing_list-head_start = 1.
t_packing_list-head_num = 0.
t_packing_list-body_start = 1.
***Start of changes by 501507008 on 29.01.2009
t_packing_list-obj_descr = 'MAIL BODY'.
***End of changes by 501507008 on 29.01.2009
DESCRIBE TABLE it_message LINES t_packing_list-body_num.
t_packing_list-doc_type = 'RAW'.
APPEND t_packing_list.
Create attachment notification
t_packing_list-transf_bin = 'X'.
t_packing_list-head_start = 1.
t_packing_list-head_num   = 1.
t_packing_list-body_start = 1.
DESCRIBE TABLE t_attachment LINES t_packing_list-body_num.
t_packing_list-doc_type   = 'XLS'.
t_packing_list-obj_descr = text-034.
t_packing_list-obj_name   = 'filename'.
t_packing_list-doc_size   = t_packing_list-body_num * 255.
APPEND t_packing_list.
Add the recipients email address
CLEAR t_receivers.
REFRESH t_receivers.
LOOP AT it_adr6.
    t_receivers-receiver = it_adr6-smtp_addr.
    t_receivers-rec_type = 'U'.
    t_receivers-com_type = 'INT'.
    t_receivers-notif_del = 'X'.
    t_receivers-notif_ndel = 'X'.
    APPEND t_receivers.
ENDLOOP.
CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
   EXPORTING
     document_data              = w_doc_data
     put_in_outbox              = 'X'
     sender_address             = ' '
     sender_address_type        = ' '
     commit_work                = 'X'
   IMPORTING
     sent_to_all                = w_sent_all
   TABLES
     packing_list               = t_packing_list
     contents_bin               = t_attachment
     contents_txt               = it_message
     receivers                  = t_receivers
   EXCEPTIONS
     too_many_receivers         = 1
     document_not_sent          = 2
     document_type_not_exist    = 3
     operation_no_authorization = 4
     parameter_error            = 5
     x_error                    = 6
     enqueue_error              = 7
     OTHERS                     = 8.
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
    EXPORTING
      document_data                    = w_doc_data
     put_in_outbox                    = 'X'
commit_work                      = ' '
IMPORTING
sent_to_all                      =
new_object_id                    =
tables
        packing_list               = t_packing_list
        contents_bin               = t_attachment
        contents_txt               = it_message
        receivers                  = t_receivers
contents_hex                     =
object_para                      =
object_parb                      =
   exceptions
     too_many_receivers               = 1
     document_not_sent                = 2
     document_type_not_exist          = 3
     operation_no_authorization       = 4
   parameter_error                  = 5
   x_error                          = 6
   enqueue_error                    = 7
   OTHERS                           = 8.
IF sy-subrc <> 0.
ENDIF.
ENDFORM.                    " SEND_FILE_AS_EMAIL_ATTACHMENT

Hi,
could you tell me which opeion should i select in SCOT under INT node. I have tried with diffrent options. but no luck.
SAPscript/Smart Forms - No Conversion
ABAP List                     - No Conversion
Business Object/Link     - No Conversion
RAW Text                     - No Conversion

Why cant i send videos?

my boyfriend has the original droid and can send up to 1min long videos thru text. i have the droid 2 and cant send videos in any format thru text. and i can only send certain ones to emails. so why cant i send them by text? and they are short videos. less than 30 secs.

Within the camera, before you record your video, go into settings and make sure you have the video length and quality set to the "for MMS" settings. Are you taking these steps below to send a video through text?
From the home screen, touch the applications tab (located at the bottom of the display).
Touch Gallery.
Touch a gallery (e.g. All videos).
Touch and hold a video.
Touch Share.
Text messaging
If presented, touch Yes.
To resize, touch Menu.
Touch Resize.
Touch one of the following options then touch OK:
176x144
320x240
Touch Menu.
Touch Done.
Touch No.
From the To field, enter a 10-digit mobile number .
As the number is entered, a matching contact may appear and can be selected at any time.
Alternately, touch the contacts icon (located on the right-side of the To field), touch a contact, touch the appropriate mobile number then touch OK.
Repeat this step as necessary to add additional recipients.
To add a subject, touch Menu.
Touch Add subject.
Enter a subject.
From the Enter message here field, enter a message.
Touch Send.
Here is a link for additional information. Click here http://support.vzw.com/clc/devices/knowledge_base.html?id=34758#messaging

Why cant i send my messages

Why cant i send my messages

Messages only works with other iOS devices and with Mac computers running Mountain Lion or Mavericks. In addition to that, the other person that you want to message with must already be registered and set up to use messages on their device. You cannot add them on your own from your device, they have to set it up first on their own.
If those conditions have been met, try this. Go to Settings>Messages>Show Subject field>Off.

Why cant I send an email with my iphone4 using bellsouth?

Similar Messages

Maybe you are looking for