Why cant i use a bought call-tone bought through I-tones for calling tones for just one of my contacts?

What makes you believe that you can't? To set a custom ringtone (or SMS tone) for a contact, go to that contact entry, tap the Edit button in the upper right. You can then edit both ringtones and SMS tones for that contact.

Similar Messages

Why cant I use the txt alert tone I downlowded for my incoming txt msgs?

I downloaded an alert tone to use for incoming txt msgs but for some reason It as gone to ringtones & I cannot use it as my recieved txt msg tone no longer, is there any way of changing this?

I downloaded an alert tone to use for incoming txt msgs but for some reason It as gone to ringtones & I cannot use it as my recieved txt msg tone no longer, is there any way of changing this?

In contacts number why - symbol is used in between numbers it's becom very difficult for me to copy the contacts number

As you can see in below pictur there is - in between numbers so is there any ways I can remove it

Hi Ruth
Welcome to the community.
I have edited there is no need for you to do so.
I can have this looked into for you, to resolve it once and for all.
Please send us an email using the contact us form in my profile you can click on the link for this form in the section 'About Me'.
Thanks
Stuart
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry that we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)

Why cant i make a FaceTime call from iMessage on the iPad

why cant i make a FaceTime call from iMessage on the iPad

Because you make a FaceTime call from FaceTime on the iPad.
On a Mac, you can start and iChat conversation from the Messages app and maybe that is what you are talking about. iChat can still be used in Mountain Lion in order to have a face to face conversation with other Mac users that are not running ML and therefore do not have FaceTime.

Why cant i use turn by turn navigation on my iPad 3 ?

Why cant i use turn by turn navigation? i can see the route and start it ,but i wont get turn by turn navigation, i online get directions!

I just bought a mini and updated to iOS 7 straightaway. It's running quite well and I haven't experienced any issues.
There is NO way to downgrade. Your friend probably did it before Apple stopped signing iOS 6.

WHY CANT I USE FINAL CUT EXPRESS HD IN MY MACBOOK

WHY CANT I USE FINAL CUT EXPRESS HD IN MY MACBOOK?

hey there DavoMrMac,
according to Apple's 'site:
System Requirements
Macintosh computer with 500MHz or faster PowerPC G4 or G5 (550MHz for PowerBook G4) or Intel Core Duo
512MB RAM
Display with 1024-by-768 (or higher) resolution
An AGP or PCI Express graphics card compatible with Quartz Extreme or an Intel GMA integrated graphics processor in MacBook or Mac Mini
Mac OS X 10.4.6 or later
QuickTime 7.0.4 or later
HDV features require 1GHz or faster processor and 1GB of RAM (2GB recommended)
500MB disk space required for applications; additional 16GB of additional storage space for Soundtrack and LiveType content (can be installed on separate disks)
DVD drive for software installation
i've been running FCE HD 3.5 on my MacBook since i got it in November '06. runs okay for the few short SD projects(15:00) or less i've put together.

Why cant I use relative paths in Netbeans

Why cant I use relative paths in Netbeans to files on my PC.
I want to be able to copy my project folder between different drives and pcs dont want to edit the code everytime I do.
BTW I didnt know where on the forum to post this. Just in case this is the wrong place.

When I use relative paths it doesnt see the files. Like when I want to add an image to a panel. If I use '../image.jpg' it wont work but if I use 'd:\javafiles\images\image.jpg\ it will work.
Cant seem to fix it.

Why Cant I Delete in Recents Calls the ones I want to ?

Why Cant I Delete In Recent Calls the ones I want to ?

Because Apple designed the iOS for it to be all or nothing. You can tell Apple you'd like to see a change here:
http://www.apple.com/feedback/iphone.html

Why cant i hear a facetime call frome my wife but she can hear me

why cant i hear a facetime call frome my wife but she can hear me

Is Facetime enabled on your phone?
http://support.apple.com/kb/TS3367

Why cant i use normal messaging on my ipad mini

I have recenly got an Ipad mini buy it will only let me message people who are on Imessage ,Why cant i use normal messaging on my ipad mini ?

Try resetting your Wi-Fi router. Turn off the power to the router. Leave it off for at least 30 seconds then power it back on. After the router has completed its startup routine and indicates a good connection to the internet, turn on your iPad and try to connect again.

Why cant i use air print with my hp deskjet 3050

why cant i use air print with my hp deskjet 3050

The HP Deskjet 3050A J611 is AirPrint compatible.
If it is not working for you, try restarting your router as well as the printer. Power them down, wait a moment or two, then power them back up again. It should work.

EAM ID based or Role based? Why settle for just one?

G'Day All,
I've raised a question in the following blog, however I would like to open it up to other people as well so they might get something out of it and in the process might share their own thoughts on the matter at hand.
ID-Based Firefighting vs. Role-Based Firefighting
So this is where I am at this point:
From what I can gather so far, my understanding of EAM ID/ROLE based is as follows:
- Id Based: Logs in using own U.ID and through GRAC_SPM accesess FFID from the GRC Server and logs into the system assigned to them (ECC, SRM, CRM etc)
Only one user at a time can use a FFID.
Firefighter need not exist in every system assigned to them due to central logon however they need to exist in the GRC system
Knows exactly when FFID is being used as he/she has to login so has a psychological effect (good thing)
Better tracking of FF tasks - Specific log reports with Reason Codes. Bonus point from Auditors!
Two Log ins so potential to commit fraud. (1 action using own UserID and 1 action using FFID)
Could be hard to track and find out when a fraud has been committed so can be a problem with auditors.
      ID Based -> GRAC_SPM : TCode for Centralised FFighting -> You will see FFIDs assigned to you
      ID Based -> /n/GRCPI/GRIA_EAM : TCode for DCentralised FFighting -> You can see the FFIDs assigned to you
- Role Based: Logs into the remote system only using U.ID, so everything gets logged against that one ID.
Multiple users can use the FFROLE at once.
Firefighter has to exist in every system assigned to them - so multiple logons.
Hard to differentiate between FF tasks and normal tasks as no login required So easy to slip up
Time consuming to track FF tasks - No Specific log reports. No Reason Codes
     R.Based -> GRAC_SPM : TCode for Centralised FFighting -> You will see FFROLEs
     R.Based -> /n/GRCPI/GRIA_EAM : TCode for DCentralised FFighting -> Not applicable so wont work
So based on this there are pros and cons in both however according to SAP only one can be used. To me personally, it makes more sense to get the best of both the worlds right? So here is my question why can’t we just use both?
    . Really critical tasks -> FFID
    . Normal EAM tasks -> FFRole
Alessandaro from the original post pointed this out:
"Per design it isn't possible to achieve both types of firefighting at the same time. It's a system limitation and hence to configurable."
Well this is what I can't seem to get my head around. For a FFID, there is a logon session so it has to be enabled and as far as I can tell there is no way around it.
However for FFRole, there isn't such limitations/restrictions like starting a separate session. FFRole is just assigned to an end user for him/her to perform those tasks using their own user ID.
So in what way is it different from any of their other tasks/roles, other than the fact that they've got an Owner/Controller assigned to the FFRole? and
What is stopping us from using it when ID based is the default?
If I were to do the following does it mean I can use both ?
    . Config Parameter: 4000 = 1 (GRC System) -> ID Based
    . Config Parameter: 4000 = 2 (Plug-In) - > Role Based
Please excuse me if my logic is a bit silly, Role Based firefighting is only done on Plug-in systems so the following should work just fine:
   . Config Parameter: 4000 = 2 (Plug-In) - > Role Based
However for ID based, it is a Central Logon, so the following is a must:
    . Config Parameter: 4000 = 1 (GRC System) -> ID Based
Which means both ID/Role based can be used at the same time, which seems to be working just fine on my system. Either way I leave it you experts and I hope you will shed some light on it.
Cheers
Leo..

Gretchen,
Thank you for thoughts on this.
Looks like I'm failing to articulate my thoughts properly as the conversation seems to be going in a different direction from what I am after. I'll try once more!
My query/issue is not in regards to if/what SAP needs to do about this or why there isn't more support from Companies/Organizations and not even, which one is a better option.
My query is what is stopping us(as in the end users ) from using both ID/Role based at the same time?
Now before people start referencing SAP documentation and about parameter 4000, humour me with the following scenario please. Again I would like to reiterate that I am still in the learning phase so my logic might be all wrong/misguided, so please do point out to me where I am going wrong in my thought process as I sincerely would like to know why I am the odd one out in regards to this.
Scenario
I've created the following:
FFID
FFROLE
Assigned them to, two end users
John Doe
Jane Doe
I set the Configuration Parameters as follows:
IMG-> GRC-> AC-> Maintain Configuration Settings -> 4000:1 - ID Based
IMG-> GRC (Plug-in)-> AC-> Maintain Plug-In Configuration Settings-> 4000:2 - Role Based
User1
John Doe logs into his regular backend system (ECCPROD001)-> executes GRAC_SPM-> Enters the GRC system (GRCPROD001)-> Because the parameter is set to ID based in the GRC Box, so he will be able to see the FFID assigned to him-> and will be presented with the logon screen-> Logs in -> Enters the assigned system (lets say CRMPROD001) At this point the firefighting session is under progress
User2
Jane Doe logs into her regular backend system (ECCPROD001) -> (can execute GRAC_SPM to check which FF Role has been assigned to her but she can see that in her regular menu, so there is no point) -> Executes the transactions assigned in FFROLEThis is done at the same time while FFID session is in progress
So all I want to know is if this scenario is possible? if the answer is No, then why not?
I physically carried out this scenario in my system and I had no problems(unless I am really missing the plot here), which brings me back to my original question: Why settle for just one?
Again to reiterate I am not getting into the efficacy or merits of this or even if one should use this. Just want to know if it is possible/feasible or not.
So there you have it. That's the whole enchilada(as they say there in Texas). I tried to word my thoughts as concisely as I can, if there are still any clarifications, more information you or anyone else reading this would like, please do let me know.
Regards,
Leo..

I have an iPhone 4s. Today I went on to my calendar app to find everything deleted from it. Then I went to make a phone call and every single one of my contacts has gone from my phone. Can I get them back and how?

I have an iPhone 4s. Today I went on to my calendar app to find everything deleted from it. Then I went to make a phone call and every single one of my contacts has gone from my phone. Can I get them back and how?

Whoa whoa no need to go restoring stuff yet, once you've done that check to verify you have done what Overlook2011 IF that doesn't work for calendars ensure your default account for calendars is set to iCloud and in calendars that it is told to "Show all calendars"

All my contacts use iPhones but one doesn't use iMessage because it uses data. I want to use iMessage for other contacts but i have to turn off for just one contact. Can i turn iMessage off for just one contact?

All my contacts use iPhones but one doesn't use iMessage because it uses data. I want to use iMessage for other contacts but i have to turn off for just one contact. Can I turn iMessage off for just one contact?

You need to delete here conversation and start another one using her phone number and not her Apple ID. You cannot delete iMessage, you can disable it. If the Apple server still sees her iPod with iMessage on and using her Apple ID, then it will continue to appear to your phone that she has iMessage. She needs to take a look at this support document about permanently disabling iMessage for her account. Can’t receive text messages on a non-Apple phone

Why cant I use my lights in the render future in PS CC

I am having trouble with the 3D feature and the Lights in the render feature in PS CC. I have contacted the Technicians on a number of occasions and each time they say its my Graphics card. My PC is only months old and the firm that built it has checked out my graphics card and say there's nothing wrong with it. When I first had PS CC things worked fine its only lately that this problem has developed, if the Technicians cant help me what chance do I have on my own and now I'm now renting something that I cant fully use. Eve

Great, now you've posted a completely blank post!

Why cant i use a bought call-tone bought through I-tones for calling tones for just one of my contacts?

Similar Messages

Maybe you are looking for