Why cant I use club pogo with fixfire?
plug-in will not work with clubpogo.com
The HP Deskjet 3050A J611 is AirPrint compatible.
If it is not working for you, try restarting your router as well as the printer. Power them down, wait a moment or two, then power them back up again. It should work.
Similar Messages
-
Why cant i use air print with my hp deskjet 3050
why cant i use air print with my hp deskjet 3050
The HP Deskjet 3050A J611 is AirPrint compatible.
If it is not working for you, try restarting your router as well as the printer. Power them down, wait a moment or two, then power them back up again. It should work. -
HT4906 why cant i use iPhoto stream with mountain lion
it wont let me check the box with my macbook to allow me to use photo stream
how can i fix thisupgrade iPhoto to the required version - what version of iPhoto do you have?
see http://www.apple.com/icloud/setup/mac.html for information for requirements
LN -
Why cant i use koc userscripts with firefox anymore??
My userscripts that workm on kingdoms of camelot no longer work what happened?
''locking - https://support.mozilla.com/en-US/questions/775124 ''The HP Deskjet 3050A J611 is AirPrint compatible.
If it is not working for you, try restarting your router as well as the printer. Power them down, wait a moment or two, then power them back up again. It should work. -
Why cant i sync me iphone with my labtop using wifi keeps saying "ADMIN- PC"?
Why cant i sync me iphone with my labtop using wifi keeps saying "ADMIN- PC"?
Make sure you are logged in as the admin on the laptop, not another user account.
-
WHY CANT I USE FINAL CUT EXPRESS HD IN MY MACBOOK
WHY CANT I USE FINAL CUT EXPRESS HD IN MY MACBOOK?
hey there DavoMrMac,
according to Apple's 'site:
System Requirements
Macintosh computer with 500MHz or faster PowerPC G4 or G5 (550MHz for PowerBook G4) or Intel Core Duo
512MB RAM
Display with 1024-by-768 (or higher) resolution
An AGP or PCI Express graphics card compatible with Quartz Extreme or an Intel GMA integrated graphics processor in MacBook or Mac Mini
Mac OS X 10.4.6 or later
QuickTime 7.0.4 or later
HDV features require 1GHz or faster processor and 1GB of RAM (2GB recommended)
500MB disk space required for applications; additional 16GB of additional storage space for Soundtrack and LiveType content (can be installed on separate disks)
DVD drive for software installation
i've been running FCE HD 3.5 on my MacBook since i got it in November '06. runs okay for the few short SD projects(15:00) or less i've put together. -
why cant i backup my iphone with itunes or icloud it keep giving me error * iphone cant be backup because sesion cant be start* -_-
Delete your most recent backup in iTunes (iTunes Preferences>Devices, click on the backup, click Delete Backup), if using a PC click Reset Sync History (also in Devices), then close iTunes, restart your device, connect your device again, open iTunes and try syncing again.
-
Why cant i use a bought call-tone bought through I-tones for calling tones for just one of my contacts?
What makes you believe that you can't? To set a custom ringtone (or SMS tone) for a contact, go to that contact entry, tap the Edit button in the upper right. You can then edit both ringtones and SMS tones for that contact.
-
Why cant I use relative paths in Netbeans
Why cant I use relative paths in Netbeans to files on my PC.
I want to be able to copy my project folder between different drives and pcs dont want to edit the code everytime I do.
BTW I didnt know where on the forum to post this. Just in case this is the wrong place.When I use relative paths it doesnt see the files. Like when I want to add an image to a panel. If I use '../image.jpg' it wont work but if I use 'd:\javafiles\images\image.jpg\ it will work.
Cant seem to fix it. -
why cant I reset my macbook with command and R when I push them dont be work and when i turn on my macbook a black page preview and said restart?please help me
Something is very wrong with your system, you need to try repairing the hard drive if possible. See:
http://pondini.org/OSX/DU6.html
If that doesn't work, you'll probably need to reinstall the system. -
Why not to use static methods - with example
Hi Everyone,
I'd like to continue the below thread about "why not to use static methods"
Why not to use static methods
with a concrete example.
In my small application I need to be able to send keystrokes. (java.awt.Robot class is used for this)
I created the following class for these "operations" with static methods:
public class KeyboardInput {
private static Robot r;
static {
try {
r = new Robot();
} catch (AWTException e) {
throw new RuntimeException(e + "Robot couldn't be initialized.");
public static void wait(int millis){
r.delay(millis);
public static void copy() {
r.keyPress(KeyEvent.VK_CONTROL);
r.keyPress(KeyEvent.VK_C);
r.keyRelease(KeyEvent.VK_C);
r.keyRelease(KeyEvent.VK_CONTROL);
public static void altTab() {
r.keyPress(KeyEvent.VK_ALT);
r.keyPress(KeyEvent.VK_TAB);
r.keyRelease(KeyEvent.VK_TAB);
r.keyRelease(KeyEvent.VK_ALT);
// more methods like paste(), tab(), shiftTab(), rightArrow()
}Do you thinks it is a good solution? How could it be improved? I've seen something about Singleton vs. static methods somewhere. Would it be better to use Singleton?
Thanks for any comments in advance,
lemonbostonmaheshguruswamy wrote:
lemonboston wrote:
maheshguruswamy wrote:
I think a singleton might be a better approach for you. Just kill the public constructor and provide a getInstance method to provide lazy initialization.Thanks maheshguruswamy for advising on the steps to create a singleton from this class.
Could you maybe advise also about why do you say that it would be better to use singleton? What's behind it? Thanks!In short, it seems to me that a single instance of your class will be able to coordinate actions across your entire application. So a singleton should be enough.But that doesn't answer why he should prefer a singleton instead over a bunch of static methods. Functionally the two are almost identical. In both cases there's only one "thing" on which to call methods--either a single instance of the class, or the class itself.
To answer the question, the main reason to use a Singleton over a classful of static methods is the same reason the drives a lot of non-static vs. static decisions: Polymorphism.
If you use a Singleton (and and interface), you can do something like this:
KeyboardInput kbi = get_some_instance_of_some_class_that_implements_KeyboardInput_somehow_maybe_from_a_factory();And then whatever is calling KBI's public methods only has to know that it has an implementor of that interface, without caring which concrete class it is, and you can substitute whatever implementation is appropriate in a given context. If you don't need to do that, then the static method approach is probably sufficient.
There are other reasons that may suggest a Singleton--serialization, persistence, use as a JavaBean pop to mind--but they're less common and less compelling in my experience.
And finally, if this thing maintains any state between method calls, although you can handle that with static member variables, it's more in keeping with the OO paradigm to make them non-static fields of an instance of that class. -
why cant i sync my devices with this new version of iTunes? my devices are suddenly not being recognized. HELP!
Connect your iPod, iPhone, or iPad to your computer and select your device.
-
I can send tv shows from my ipad to my apple tv without any issues. Why cant i do the same with a movie rental? Or how do i do the same with a movie rental?
Personally I think the iOS devices are poor at reconnecting - Airplay establishes that a link is available but when the iPhone/iPad has been away from the house and rejoins the network i think AppleTV already thinks it's connected with a different IP address and fails to recognise it has joined the network again with new credentials.
Something along those lines anyway.
I find that a combination of restarting AppleTV, router and iOS device tends to fix it, but not for everyone.
AC -
Why cant i use turn by turn navigation on my iPad 3 ?
Why cant i use turn by turn navigation? i can see the route and start it ,but i wont get turn by turn navigation, i online get directions!
I just bought a mini and updated to iOS 7 straightaway. It's running quite well and I haven't experienced any issues.
There is NO way to downgrade. Your friend probably did it before Apple stopped signing iOS 6. -
Why cant i use normal messaging on my ipad mini
I have recenly got an Ipad mini buy it will only let me message people who are on Imessage ,Why cant i use normal messaging on my ipad mini ?
Try resetting your Wi-Fi router. Turn off the power to the router. Leave it off for at least 30 seconds then power it back on. After the router has completed its startup routine and indicates a good connection to the internet, turn on your iPad and try to connect again.
Maybe you are looking for
-
Problem in dynamic file configuration
Hi All, I am working on a scenario for which different files must be generated for each recorset. The file name should be generated dynamically based on the input fields. I am able to generate different files but with same file name for all the files
-
Dump error in mb1a(SAPSQL_ARRAY_INSERT_DUPREC)
Dear Friends, We got a dump error(SAPSQL_ARRAY_INSERT_DUPREC) when relesing particular material of the production order in mb1a. the detail error is as follows. ABAP runtime errors SAPSQL_ARRAY_INSERT_
-
Hi I'm using table COVP and running transaction DP96 to bill its cost (create DEBIT MEMO).. on which table can i find whether the entries from table COVP (Document Number) is already billed or not....thanks Edited by: Alvin Rosales on Jul 6, 2009 7:4
-
the sound on my ipad is not working. It will work on and off and then cut out all together. Sometimes if I use the ear phones it will work for a while and then it will cut out all together
-
Ipod Touch won't mount after 10.5 install.
I upgraded to 10.5 over the weekend and am now unable to mount my ipod. When connected, the charge icon will appear but it won't connect to iTunes to backup or update. I've never had any problem getting it to connect before. Software update ran so I