Why cant i use wifi at home through the router?

My PC can get on the internet through the router, why cant iphone4s connect the wifi?
Is it my settings problems? how can i set it? tell me, please. thank you.

Does the iPhone connect to other networks?
DOes the iPhone see the network?
Any error messagee when you try to connect?
Try:
- Reset the iPhone. Nothing will be lost
Reset iPhone: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on the router
- Reset network settings: Settings>GeneralReset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup
- Restore to factory settings/new iPhone.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

Similar Messages

  • Why cant i use a bought call-tone bought through I-tones for calling tones for just one of my contacts?

    Why cant i use a bought call-tone bought through I-tones for calling tones for just one of my contacts?

    What makes you believe that you can't? To set a custom ringtone (or SMS tone) for a contact, go to that contact entry, tap the Edit button in the upper right. You can then edit both ringtones and SMS tones for that contact.

  • WHY CANT I USE FINAL CUT EXPRESS HD IN MY MACBOOK

    WHY CANT I USE FINAL CUT EXPRESS HD IN MY MACBOOK?

    hey there DavoMrMac,
    according to Apple's 'site:
    System Requirements
    Macintosh computer with 500MHz or faster PowerPC G4 or G5 (550MHz for PowerBook G4) or Intel Core Duo
    512MB RAM
    Display with 1024-by-768 (or higher) resolution
    An AGP or PCI Express graphics card compatible with Quartz Extreme or an Intel GMA integrated graphics processor in MacBook or Mac Mini
    Mac OS X 10.4.6 or later
    QuickTime 7.0.4 or later
    HDV features require 1GHz or faster processor and 1GB of RAM (2GB recommended)
    500MB disk space required for applications; additional 16GB of additional storage space for Soundtrack and LiveType content (can be installed on separate disks)
    DVD drive for software installation
    i've been running FCE HD 3.5 on my MacBook since i got it in November '06. runs okay for the few short SD projects(15:00) or less i've put together.

  • Why cant I use relative paths in Netbeans

    Why cant I use relative paths in Netbeans to files on my PC.
    I want to be able to copy my project folder between different drives and pcs dont want to edit the code everytime I do.
    BTW I didnt know where on the forum to post this. Just in case this is the wrong place.

    When I use relative paths it doesnt see the files. Like when I want to add an image to a panel. If I use '../image.jpg' it wont work but if I use 'd:\javafiles\images\image.jpg\ it will work.
    Cant seem to fix it.

  • Why cant i use turn by turn navigation on my iPad 3 ?

    Why cant i use turn by turn navigation? i can see the route and start it ,but i wont get turn by turn navigation, i online get directions!

    I just bought a mini and updated to iOS 7 straightaway. It's running quite well and I haven't experienced any issues.
    There is NO way to downgrade. Your friend probably did it before Apple stopped signing iOS 6.

  • Why cant i use normal messaging on  my ipad mini

    I have recenly got an Ipad mini buy it will only let me message people who are on Imessage ,Why cant i use normal messaging on  my ipad mini ?

    Try resetting your Wi-Fi router. Turn off the power to the router. Leave it off for at least 30 seconds then power it back on. After the router has completed its startup routine and indicates a good connection to the internet, turn on your iPad and try to connect again.

  • Why cant i use air print with my hp deskjet 3050

    why cant i use air print with my hp deskjet 3050

    The HP Deskjet 3050A J611 is AirPrint compatible.
    If it is not working for you, try restarting your router as well as the printer. Power them down, wait a moment or two, then power them back up again. It should work.

  • Why cant I see my CSS styles in the new Admin Editor?

    Why cant I see my CSS styles in the new Admin Editor?

    Apply the two fixes below in order as needed: 
    Fix #1
    Launch iPhoto with the Command+Option keys held down and rebuild the library.
    Since only one option can be run at a time start with Option #3, followed by #4 and then #1 as needed.
    Fix #2
    Using iPhoto Library Manager  to Rebuild Your iPhoto Library
    1 - download iPhoto Library Manager and launch.
    2 - click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
    3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option.
    4 - In the next  window name the new library and select the location you want it to be placed.
    5 - Click on the Create button.
    Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments.  However, books, calendars, cards and slideshows will be lost. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
    OT

  • Why cant I send mail to myself from the ipad. It remains in the out box

    Why cant I send mail to myself from the ipad. It remains in the out box.
    I am using the wifi only.

    Why cant I send mail to myself from the ipad. It remains in the out box.
    I am using the wifi only.

  • My ipod 4G won't connect to my wifi at home with new router. Says "unable to connect" and won't give me any other options. Have tried resetting network connections. Help.

    My ipod 4G won't connect to my wifi at home with new router. Says "unable to connect" and won't give me any other options. Have tried resetting network connections. I don't want to lose anything. I have tried turning everything off and back on again. Desktop and laptop are working fine. Sometimes it turns on suddenly and I can use it for like 20 mins but then shuts off again. Same thing is happening with my dad's iphone, Help.

    Does the iOS device connect to other networks?
    Does the iOS device see the network?
    Any error messages?
    Do other devices now connect?
    Did the iOS device connect before?
    Try the following to rule out a software problem:                 
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on your router
    .- Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - Wi-Fi: Unable to connect to an 802.11n Wi-Fi network       
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar

  • Why can I only hear my calls through the speaker?

    Why can I only hear my calls through the speaker?

    Because your receiver may not be working anymore. Use http://support.apple.com/kb/TS1630 to troubleshoot this

  • Why have I lost PDF printing capability through the File Print menu?  When will it be fixed?

    Why have I lost PDF printing capability through the File>Print menu?  When will it be fixed?

    What app are you using to view PDF files? Preview can be a poor choice for some PDF files - I recommend using Adobe Reader - http://get.adobe.com/reader/ - perhaps it will solve your printing problem.
    Clinton

  • Function module: why do we use FM and what is the purpose of using FM

    hi,
       Can any please explain. Why do we use FM?
                                           What is the purpose of using FM ?
                                           Where we are using FM and for what tables in R/3 ?
    I could be thankful to you if any one answer above questions.
    Arun

    Hi,
      We go for creating FM when there is a chance of using the same code in different reports in R/3.
    Suppose I have a requirement say, to display the Payer Name for every sale order.
    This is most common requirement in any project.
    You can create a FM say READ_CUSTOMER_NAME in SE37.
    Write a select statement from the table VBAP to fetch the Payer Name based on the Sales Order.
    Now you can activate the FM and it is ready to be used across all the reports in R/3.
    Need : To avoid redundant coding and to modularize the code.
    If you want to see the list of Standard FMs, got SE37 --> press F4 and you'll get all the SAP standard FMs.
    For customized FMs (User defined), type Z* or Y* and press F4.
    Hope this helps a bit !!!
    Regards,
    Balaji V

  • Im having problem setting up my Hotmail account, it used to work fine until few days ago. It says ive entered an incorrect username or password which i can sign in fine with them details if i use laptop or safari through the phone, Please help..

    Im having problem setting up my Hotmail account, it used to work fine until few days ago. It says ive entered an incorrect username or password which i can sign in fine with them details if i use laptop or safari through the phone, Please help..

    I Sugges you to log into your hotmail acc and go to security and password change bit, then you will see two-step verification.. turn that off and you will be able to set it up on your iPhone/iPad or even Mac.
    Give your phone a restart before trying to set it up. Thanks

  • Why cant i find Mountain Lion download in the APP store?

    why cant i find Mountain Lion download in the APP store?

    They usually remove the previous version. If you need to purchase it, contact the App Store.

Maybe you are looking for

  • Can connect to VPN but not Remote Desktop

    I hope I've go this post on the right section. My current OS is Snow Leopard and I've been trying to connect to my work computer. I'm able to successfully connect to our intranet via VPN using a Nortel client, bust I just can't seem to connect to my

  • Application Crashes/Quits when attempting to change sequence settings

    Application (Final Cut Pro 4) suddenly quits/crashes when attempting to changwe sequence settings. How can this be fixed. Also changes made in "user preferences", "timeline options" are not saved. Also, audio wave forms no longer show up in "timeline

  • How to add additional field " SEGMENT" in the FBL5N Report

    Hello , The Requirement is we need add the field " Segment" in the Report FBL5N. Could you please advice How to add the field " Segment" to the FBL5N Report. Thanx & Regards Ramesh

  • Translation a Standard text

    Hi Experts,       Can u suggest how to Transalate a standard text its self to transalate in to another lanaguage. And How to Generate a transport Request for that New standard text?

  • Event Handling for Graphic Shapes

    Hi guys, I have a problem on the implementation of a piece of software that i'm making, to be more specific i implement a GUI. In this GUI i draw rectangles, lines and that kind of things. The problem is that i want when clicking on a rectangle, an e