Why cant send imessage without hitting "send" using blue tooth keyboard?

its quite annoying when you type with a blue tooth keyboard sending imessage you have to hit the "send" button on the screen all the way across instead of hitting the "enter" key on the keyboard
is there any option we can choose from the system??

Sherry-
I do not think there is a way around it.  But try pressing the Tab key several times until the Send button lights up.  If that works, pressing Return on the keyboard should be equivalent to hitting the Send button on the screen.
If that does not work, try each of the function keys along the top of the keyboard, in case one of them has been pre-programmed to Send a message.  You may have to hold down the fn key (bottom left).
You might look into using the "Assistive Touch" feature at Settings-General-Accessibility-Assistive Touch.  I do not know what it does, but it mentions having difficulty touching the screen.
Fred

Similar Messages

  • Why cant i print from my ipad using airport express but i can print from my mac using the express

    why cant i print from my ipad using airport express but i can print from my mac using the express

    Because your printer has to be Airprint compatible and connected to WiFi. There are applications, such as Printopia, that will allow you to print through your computer.

  • Why cant my imessages sync across both iphone and ipad

    why cant my imessages sync across both iphone and ipad same with face time

    I looked into your question and believe I may have a solution for you.
    Your iMessages likely aren't syncing because of a bug in iOS 5. Syncing iMessages between iOS devices is supposed to happen automatically, but sometimes it does not.
    You could likely manually activate syncing by navigating to Setttings --> Messages --> Receive At --> Caller ID on both your iPad and iPhone and selecting your Apple ID.
    Hat Tip: OSXDaily

  • Why am I no longer able to use my Logitech keyboard since the software upgrade y'day?

    Why am I no longer able to use my Logitech keyboard since the software update last night? 

    Hey atinaaw,
    I would first suggest uninstalling the software that is already on your computer for the printer. I have included the document 'Uninstalling the Printer Software'. Please choose the option for Windows 8, as it will be the same steps for Windows 8.1.
    After the uninstall is completed. Please download and run the Printer Install Wizard. This will make sure that you do get the most current and compatible software for your computer, and printer.
    Please let me know if you are able to install, and use your printer successfully, thank you.
    I worked on behalf of HP

  • Why can't I charge Iphone 4S while using blue tooth

    When I go to charge my Iphone 4S in car while using blue tooth the sound stops.  What can i do to correct this?  Or is that jus the way it is.

    Requires the support of Bluetooth Profile A2DP, that's why. Your phone supports such, but it appears your hearing aids do not.

  • How do I set my 3gs to stream pandora using blue tooth?

    What do I half to set a 3gs to in setting to send Pandora blue tooth?

    Burneyman32 wrote:
    Thanks
    So, you saying 'Thanks' is what solved your question?  Then what did you need Kilted Tim for?

  • Connect OfficeJet 100 mobile printer to iPad using blue tooth

    Trying to print from my iPad to the Office Jet 100 printer using blue tooth and not getting it set up correctly.
    Help
    Dryrot

    Hi,
    Unfortunately the printer is not e-Print enabled which means you cannot use the e-Print or AirPrint functionality which both work over wi-fi and not bluetooth.
    The IPad does not have any options for bluetooth printing. I've included a link here to printers that are web connected and support wireless printing.  
    There's a thread here that covers this issue also.
    "Although I work for HP, I'm speaking for myself and not on behalf of HP"
    "Say "Thanks" by clicking the Kudos Star in the post that helped you.
    --Please mark the post that solves your problem as "Accepted Solution"

  • Can you use earphone jack and continue to use blue tooth connection to speakers like bose

    Can you use earphone jack and continue to use blue tooth connection to speakers like bose

    Hi,
    I'm a owner of the X-fi Elite Pro, and for me the headphone + speakers settings works very well. Just to be sure, you bought the X-Fi XtremeGamer Falalty Pro Series? and not the XtremeGamer Fatalty Champ Series or even the old regular X-Fi Fatalty? If so, I'm quite sure you need the I/O box with the 6.35 mm (/4 inch) steroe jack. My headphones are connected through the /4 inch jack on the Elite Pro unit and my 5. surround system through the X-Fi card's 3x /8? mini jack.
    I guess you have to buy the X-Fi I/O Dri've Upgrade Kit (or the Console Upgrade Kit) to use your headphones and speakes at he same time. I chose the Console because i couldn't li've with a thick and ugly digital cable sticking out in the front of my PC?
    Hope it helped!

  • Help connecting an LG phone using Blue Tooth to Macbook

    Hello
    I am having trouble connect ing my LG phone to my Macbook using Blue Tooth. I am using discover mode on booth devices, i get asked about the code number machine on each device, but on the macbook it says that there is a problem with my Audio Device and that I need to disconnect the headset,,I dont have one connected. Any help with this would be greatly appreciated. thnx

    cheryllb wrote:
    I can get them paired but when I select the lg device listed on my HTC phone it does nothing.  I want to connect them so I can transfer the pictures from my old device to my new device.
    Hi Cheryllb,
    Thanks B33, as you are correct that this cannot be done via Bluetooth transfer. There are, however, ways that Cheryllb can get this done. Cheryllb, do you have a memory card in your LG Voyager? If so, you can save the pictures to the memory card (just go through your pictures, highlight them, press Menu, then move to card or "external memory" is how it may be displayed). Then, you can remove the card from the Voyager and either use it in your new device, or transfer the pictures using a card reader and put them on your PC. 
    To transfer Picture Messages from wireless device to PC: 
    1.        Access photo from "My Pictures" and choose "Options."
    2.        Select  "Move" or  "Transfer."
    3.        Remove memory card and insert card and card reader in USB port.
    4.        Go to your file directory on the PC.
    5.        Transfer files to the folder of your choice.
    If you do not have a memory card, you are able to connect your Voyager to a USB Cable and transfer the pictures from the device to the PC. Once that is done, they will be in a file. You can then hook up your new phone to the PC with it's USB cable and put the pictures on the new phone, by dragging and dropping that folder into the folder for your new device.
    I hope this information is helpful and allows you to find a resolution to transfer your pictures from phone to phone. I do understand how important these pictures can be.
    Thanks very much and have a great day! 

  • Cant send using smarthost

    Dear All,
    my Exchange 2010 stops sending emails after 4 days,
    no changes has been made , no one touched the exchange.
    the exchange was configured to send using the ISP smart host ( SMTP ).
    my exchange 2010 build 14.3.224.2 .
    all the emails i sent stays they never been delivered and neither bounce back.
    can you please advise how to troubleshoot this ?
    SMTP is a Dutch company using port 587
    my Send connector is using the port 587

    From your error, your provider requires a username and password for SMTP delivery through their system.  This means that your ISP isn't going to openly reroute anything sent to them unless they are able to map it back to a sending system (they aren't
    an open relay).  On your outbound send connector, on the Network
    tab, there's a Smart host authentication section (under the white box where your smart host is listed).  Click the Change... button, then enter your ISP's authentication information under the
    Basic Authentication section.  You will need to learn what that authentication information is from your ISP.
    BTW, if you don't have a specific outbound send connector, you will need to create one. Use the following link for assistance:
    http://technet.microsoft.com/en-us/library/aa997285(v=EXCHG.141).aspx
    send connector is already created and those information of the ISP mail also. 
    i tried to create a POP3 account on the outlook using @domain.com i am sending with.
    my smtp server is mail.domain.com  for outgoing and incoming.
    can i use the same SMTP on my smart host ?

  • I have an ipad2 but why cant send a message?

    I have a ipad2 , but i cant send a message , the send button is blank .

    The greyed out send button means the person you are sending to is not recognized as an ios5 user that has turned on his i message.

  • Why does "Link Media" behave differently when used as a keyboard shortcut vs when right clicked???

    Not sure whether anyone else is encountering this, but the "Link Media" command behaves differently when right clicked as opposed to when used as a keyboard shortcut.
    When you right click to select that option for an offline file, you get only the corresponding disconnected source media. But when you execute "Link Media" via a keyboard shortcut, PP brings up a huge list of all other offline media. Why does it only do that when you use the keyboard shortcut for "Link Media" but not when you right click "Link Media".
    I'd like to get the Link Media command to behave via the keyboard shortcut the same way it behaves when right clicked. I don't want to have to deal with relinking a hundred other files, but just the single offline file I'm working on.

    Among the alternatives not mentioned... Using a TiVo DVR, rather than the X1; a Roamio Plus or Pro would solve both the concern over the quality of the DVR, as well as providing the MoCA bridge capability the poster so desperately wanted the X1 DVR to provide. (Although the TiVo's support only MoCA 1.1.) Just get a third-party MoCA adapter for the distant location. Why the hang-up on having a device provided by Comcast? This seems especially ironic given the opinions expressed regarding payments over time to Comcast. If a MoCA 2.0 bridge was the requirement, they don't exist outside providers. So couldn't the poster have simply requested a replacement XB3 from the local office and configured it down to only providing MoCA bridging -- and perhaps as a wireless access point? Comcast would bill him the monthly rate for the extra device, but such is the state of MoCA 2.0. Much of the OP sounds like frustration over devices providing capabilities the poster *thinks* they should have.

  • Call volume low after using blue tooth

    I have an issue that I have not seen a response for.  After nearly 2 years of perfect use, my call volume (that is the sound of a caller's voice) is now too low.  The volume button on the side of the phone is at its peak (when I am on a call).  No water or other debris has gotten into the phone speaker that I can see.  The only think that did happen before this problem is - I had been on a blue tooth call in my car.  I have used this phone with blue tooth for over a year without any problems, but I mention this as it is the only think that I can think of that might have caused this glitch.  It is though the call volume is purposely very low and I thought that the blue tooth use may have caused this.  Any thoughts?

    It sounds like it is still connected.
    Try disconnecting it here:
    Settings > Bluetooth > Select the Durango and disconnect.
    If that does not work:
    Reset: Hold the Sleep/Wake and Home buttons and don’t let go until the screen goes dark and the Apple logo appears (no data will be lost)

  • I can not transfer the files using blue tooth?

    I can not transfer the video,pictures using the blue tooth. Though mobile display says I pad paired,
    But I pad is not connected to the mobile, even both places pass key is entered ok.

    Transferring of files via Bluetooth on iOS is not supported. Bluetooth on the iPad, iPhone, iPod Touch is for the use of external keyboards, speakers earphones and accessories like those.
    iOS: Supported Bluetooth profiles - Apple

  • Ipad connecting with vmware view client v5.1. "any way to disable or hide radial virtual keyboard mouse interface as using blue tooth external keyboard"

    Issue - ipad connecting with vmware view client v5.1. "any way to disable or hide the vmware view's radial virtual keyboard mouse interface" either in vmware view client settings, hidden cmds, or ipad system settings.
    My client is using an external blue tooth ipad metal cover type keyboard and does not wish to have the radial keyboard / mouse visable or floating on desktop when connecting to vm with iPad using vmware view client v5.1.
    i was unable to locate any settings or related toggle key/function combo keystrokes under iPad settings under vmware view client, to affect viewability of the radial keyboard/mouse. And can you kill it from service/process on vm instead of ipad? then dont allow service to restart at startup? What is the name of services that enable the radial virtual keyboard mouse - function to work?
    Thanks for any and all feedback-
    stratman1

    I'm having a very similar issue. Sometimes, when I boot and type in startx (I'm not even a GNOME user--I use dwm and no graphical login manager), I just get a black screen. No mouse cursor, so I think X doesn't even load. It only started with the xserver 1.6 update and the update to that hasn't changed anything. What I've been doing is just rebooting until it loads normally (takes one to three times). Is anyone else having this problem?

Maybe you are looking for