Why Certified Freshers are not considered for Job Openings?

Hi
I am Mohan.
I got certified in FI Module and updated my profile in all the job sites but I didn't got any call from any rectuiter.
Why is the situation like this?

Hi Mohan,
Only few companies will recruting SAP Certified Freshers..But as a certified consultant get more calls rather than non certified freshers...In mumbai Reliance,Fujistu ,capgemini, recruiting certified freshers..
Dont worry wait for time..one fine day u will get it good opportunity.
Regards
Kalpana

Similar Messages

Rules are not allowed for jobs with set 'archive edited messages only' flag.

Hi,
We are on AEX 7.4 and have enabled user defined search and also setup archiving. Even though the retention period has expired but still the messages are not being
archived.
We see following issues:
1. Unable to setup archiving rule in Runtime Work Bench, we are getting following error:
Rules are not allowed for jobs with set 'archive edited messages only flag.
2. Unable to set the expiration of messages using the following link.Each time we specify the number days it shows the same number of
messages expired.
http://XXXXX:50000/MessagingSystem/job/reorgdb.jsp
3. However if we click on "remove messages" button the messages are getting deleted which tells me that the messages are not matching any
archiving rule hence are being removed.
Any pointers to the above issue are appreciated!!!
Thanks,
Rajeev

Hi,
Please check the [link|http://www.****************/Tutorials/XI/Archiving/Index.htm]
Also check this
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/402fae48-0601-0010-3088-85c46a236f50?quicklink=index&overridelayout=true
http://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=147266890
Regards,
Naveen.

Changes in backing bean are not considered for deployment

hi,
i'm not sure whether this is a jsf specific issue but..anyway, here's the case: I'm using eclipse ( lomboz) as ide and whenever i change something in my backing bean (let's say add a new method) it is not found after redeployment neither after clean command. after some startups the changes eventually are adopted. this is really annoying as just starting the server takes me half a minute. so if anybody ever had the same or similar problem or has any experience with hot deployment please sent me a clue.
regards,
jens

>
Elena Ainoulina wrote:
> Anyone had this issue in CHARM before ?
>
> we have SLFN - SDCR - SDMJ open for a change.
> Development complete and almost tested - transport of copies is in QA, but original transport is not released from DEV.
> Business now wants to stop this change and close SLFN.
>
> How can I close/cancel SDMJ ?
> When I try to cancel it, I get the message "Changes in development system are not excluded" and status is not changed.
> Is there a way to force close SDMJ ?
>
> Thank you
> Elena
Elena, the system is giving you this message as a (cryptic) reminder that even though you want to close the SDMJ, you have made changes in DEV and QA that need to be reversed with another transport. Depending on your audit requirements, you may want to add these reversing entries on the same transport as a new task, or on an additional transport and send the whole thing through the normal processing. The other alternative is to execute CRM_SOCM_SERVICE_REPORT - just make sure you have reversed the changes already made to maintain the integrity of your landscape.

Why filters are not awailable for my objects?

Why filters are not awailable for my objects?

Based on your screenshot preview, I can see that from your Elements panel, you are using an external .html file, correct?
Some in-app Properties are not available for external, non-managed files.
If you create a new project (File > New), for example, add an element you will have full access to Edge Animate properties.
If you create a htm5 doc in Dreamweaver, for example, and open that in Edge Animate then you are limited - because the originating file (.html) is from another application.
Hope this helps, clarify.
Darrell

I have an iMac OS X Version 10.5.8 but I also have a MacBookPro 10.7.5 version, why software updates are not the same? For example, when I want to know how much memory can not store in the same way in either computer.

I have an iMac OS X Version 10.5.8 but I also have a MacBookPro 10.7.5 version, why software updates are not the same? For example, the way to see how much memory I have in my iMac is diferent than MacBookPro. And where I can see the memory of the disc I've got in my iMac? Than you very much.

If you want everything the same on both computers you need to be running the same OS X version. You can't because your iMac is a PPC machine, not Intel.
But to see information about your hard drive is the same for both. Simply select the drive icon on the Desktop. Press COMMAND-I to open the Get Info window. Disk information is in the upper panel.

PJRM - Job Levels are not Mapped to Jobs in PJRM

Dear Experts,
We are Implementing Oracle Project Resource Management and We have created Job Levels in Project Costing and the same we assigned at Job creation time in HRMS, When we are running the Program called "PRC:Maintain Project Resources" in output we are getting below message.
Message: The Following People have been copied from the Oracle HRMS Tables and created as Resources in Project Resource Management. However, these resources are not available for resource searches because their jobs are not mapped to a job in Project Resource Management with an assigned job level.
Any one could suggest me why this message we are getting even Job Levels are assigned at Job in HRMS
Please help me on this
Thanks in Advance..

Dear Experts,
We are Implementing Oracle Project Resource Management and We have created Job Levels in Project Costing and the same we assigned at Job creation time in HRMS, When we are running the Program called "PRC:Maintain Project Resources" in output we are getting below message.
Message: The Following People have been copied from the Oracle HRMS Tables and created as Resources in Project Resource Management. However, these resources are not available for resource searches because their jobs are not mapped to a job in Project Resource Management with an assigned job level.
Any one could suggest me why this message we are getting even Job Levels are assigned at Job in HRMS
Please help me on this
Thanks in Advance..

Payment method(s) are not allowed for this program / Program RFFOAVIS_FPAYM

Dear Friends,
In Se38 abap editor, I entered the program RFFOM100, i entered the details program run date,identification future,paying company code,payment methods T, House bank, Account Id and executed the program. I am getting the error 'Payment method(s) are not allowed for this program'.
Payment method S is not used in F110, It was not mentioned in vendor master or vendor invoice.It is not mentioned in fbzp in bank determination. When i tried to delete payment method 'S' the system shows a message Payment Method S is being used in the company code.
In the program RFFOAVIS_FPAYM, i entered the details program run date,identification future,paying company code,payment methods T, House bank, Account Id and executed the program. I am getting the error 'Program RFFOAVIS_FPAYM: No records selected'. But there open items or invoices.
Please suggest how to resolve the errors.
Regards
Sridhar

Hello,
Why are you directly executing these programs?
You will not expect these program to execute directly by going to SE38.
I would have configured the relevant payment methods in the country with DME structure or classical RFFO* programs, which in turn pick up the inherent programs at the time of running F110.
For example, if you need to generate BACS file for country GB, either you copy the GB_BACS to ZGB_BACS or use GB_BACS directly in FBZP settings.
Make sure that you have maintained OBPM1 / OBPM2 / OBPM3 and OBPM4 settings properly.
The system automatically gives the access to system RFFOAVIS_FPAYM. Prepare a variant against this program in F110. Relevant file gets generated to folder path mentioned in OBPM4 will get generated. The file get generated can be seen in AL11.
Hope this is informative and solves your issue.
Regards,
Ravi

Depreciation posting rules are not define for area 00 in company code

Dear Expert,
Would like to seek for help, when I run a customize report (AUC without PO not yet capitalized report the system prompt the error depreciation posting rules are not define for area 00 in company code only on the march 2011 on ward but before march 2011 the report is able to display as usual.
Between., does SAP have the standard report to list the asset which is AUC and not yet capitalized?
My version of SAP is ECC 6.0.
Kindly advise.
Regards,
Karen

Hi,
Thank you for the prompt reply, why the system prompt the error depreciation posting rules are not define for area 00 in company code only on the march 2011 on ward but before march 2011 the report is able to display as usual?
Please help.
Regards,
Karen

Open Items not considered for Payment Lot

Hello Experts.
I have created some open items using FPE1. They are displayed as due in FPL9. But the same open items are not selected in FP06 for clearing. They are also not considered for clearing in a payment lot (FP05).
Can some one tell me what could be the reason for this
Best Regards
Venkat

If you have a clearing restriction, to be able to remove it when you change the document in FPE2 for example you need to activate that clearing restriction in:
Financial Accounting > Contract Accounts Receivable and Payable > Basic Functions > Open Item Management > Define Modifiable Clearing Restrictions
If you don't do that you cannot manually change it.
Adriano.
PS: Again are people in these forums that put answers to be in the statistics... GOD..

Why Toshiba notebooks are not delivered with the common Vista install CD

Our household now has two x Toshiba laptops, both of which were supplied with MS Vista Home Premium pre-installed.
The nature of the Recovery Media provided with these machines is such that (a) we do not have sufficient flexibility over volume/partition sizes, program locations etc., and, more specifically.
It makes it necessary for the majority of the bundled software (Norton Security etc.,) to be installed by default in the event of a system failure. (And immediately uninstalled following recovery! An unnecessary waste of time.)
Bearing in mind that a proportion of the price paid for each laptop must have included a cost for the Vista Operating System, does anyone know if it is possible to obtain a Master Recovery disk which ONLY consists of the operating system, and which allows us the flexibility of configuration which used to be available when the OS was purchased as a separate product.
Additionally, please let me know if it is possible to purchase Toshiba laptops as a RAW machine, i.e no OS supplied, and I will then buy my own and cut out the rubbish which is supplied on the pre-installed media.

>Why Toshiba notebooks are not delivered with the common Vista install CD?
The answer is very simple: software is bundled to hardware and when you buy notebook you buy license for preinstalled Vista version and you can install recovery media so often you want and it belongs JUST to your notebook model. It cannot be used with other notebook or PCs.
If you get usual Vista installations DVD it can be installed on each computer system. For such purposes you must buy Microsoft installations DVD.
As you already wrote Toshiba recovery image contains much software that can be not useful for you. You can remove it from the system and nobody force you to use them. I do the same.
After clean OS installation the first thing I do is to remove or software I don't need or I don't like.
I optimise preinstalled OS on my own.

HT4623 why my iphone are not responding after i update the latest ios? and the screen displaying itunes icon

why my iphone are not responding after i update the latest ios? and the screen displaying itunes icon

You are in Recovery Mode. Follow the instructions below to recover your iPad.
1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
If you cannot turn off the device using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the device turns off, release the Sleep/Wake and Home buttons.
3. While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button.
5. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
Note: You need to be patient and repeat the above many times to recover your iPad. Data will be lost.

I am using final cut express. It seems that any clip over a certain length, say 5 min, does not fully transfer! All shorter clips are perfectly fine. Is there some reason why longer clips are not fully transferred? (a half blue circle shows up on the tran

I am using final cut express 4. It seems that any clip over a certain length, say 5 min, does not fully transfer! All shorter clips are perfectly fine. Is there some reason why longer clips are not fully transferred? (a half blue circle shows up on the transfer list, indicating that the clip was not fully transferred. When I check in the capture scratch folder, sure enough the whole clip is not there!
Is there some glitch in final cut express that only allows short clips to be transferred in full?

Thanks for the reply. I'll try to answer all the questions (I am a relative novice). Your help is appreciated.
By the way, the other reply I received suggested the following:
In Final Cut Express>System Settings>Scratch Discs make sure the Limit Capture/Export File Segement Size To: is not checked.
I did this and it was already unchecked. So this is not the answer...
The strange thing is, I have been logging and transferring with FCE for 2 yrs without any problems at all with shorter clips, but have come up against the problem with long clips (over 5 or so min) the whole time. I got around it by simply making sure I stopped recording after less than 5 min while shooting footage. OR if I accidentally got a long clip, I import into imovie and then import into FCE. Not very streamline and I worry about compressions altering quality!
I am now trying to import a 20 min and a 17 min clip and it only transfers around 3 minutes of each, I have re-tried several times and it happens repeatedly. The blue circle in the transfer list shows up as a half blue circle instead of full. Clip cuts off after 3 or so minutes.
ANSWERS
how you are ingesting the files
From external flash drive connected directly to mac using FCE.
the format of the source footage
digital via ext flash memory. Frame size :1929X1080 / 25fps
what camera shot the footage
SONY HXR NX5
how you are connecting to the computer
from flash memory directly via usb
what version of FCE you are using
4
what OS your computer is running
10.6.8
what model Mac
macbook Pro intel Core i7
what drive you are using for Capture Scratch
3TB external drive (plenty of room left)

MiniSAP - SE80 Prompts Error "Printer not suitable for job step..."

Hi all,
I bought an ABAP Objects book. I installed the MiniSAP. When I run SAP GUI and SE80, both with BCUSER and DDIC, it gives me error message "Printer not suitable for job step. Automatic printing not possible."
If I double-click on the message, it does not show the description of the error message, instead it displays an Internet Explorer error message "The page cannot be found."
Furthermore, the same error message, "The Page cannot be found", also appears in the area where the listbox and textbox for selecting Development Class, Program, Function Group, etc. Making these function becomes unavailabale. I cannot see the listbox and textbox in the Object Navigator. The only development class show is "$_TMP_BCUSER" (if I recall correctly). But nothing is in the development class.
How do I solve this problem?
OS: Windows XP Professional
Browser Installed: Internet Explorer and Firefox
Other info: I put incorrect IP Address in the Hosts file while installation was in progress. This created error. I then correct the IP Address in the Hosts file and resume installation. I still encountered error until I restarted my computer and resume installtion. I use IP Address 10.10.0.10.
Thanks in advance.
Regards,
Goh Tiam Tjai

I searched the solution in the other SDN sub forum (ABAP Programming). The following patch solves the problem.
http://www.sap-press.de/download/dateien/473/sapgui_patch.zip
Regards,
Goh Tiam Tjai

Leading Zeros of Consumption in historical time series are not considered

We are using VM MRP Type and weighted average model to calculate forecast value using historical consumption values. I have 36 historical periods(months) but have consumption incurred only in last period i-e "1". I have choosen a weighted group 01 (20% for 1-12 month, 30% for 13-24 month, 50% for 25-36 month). Using these setting it should calculate the basic value as 1*0.5/12 = .042 but it gives "1" as basic value not considering leading zero consumption value in historical time series. If i put a value in first period it calculates correctly and considers the leading zero.
We have implemented note 1113276, 1145764 & 1113277 and have chosen CV_OPTION="X" in the interface as per theses notes instructions but still while executing the forecast it is not considering the leading zeros.
We are using ECC 6.0 MM with 602 support pack.
Need urgent help in this regard.

Have you followed the steps as per SAP Note 1113276 , Just check below link with same subject discussed check it helps you,
[Forecast with consumption zero are not considered |Forecast with consumption zero are not considered]

You are not licensed for TA Adapter. Service disabled.,

we had error message like
TIDAL Log shows “ You are licensed to connect the client” to run the TIDAL batch job it’s failing.
4375678,09/03/2014 03:15 AM,Audit,You are not licensed for WebService Adapter. Service disabled.,Client,,,,,1000,ENAW-VXD21P,,
4375677,09/03/2014 03:15 AM,Audit,You are not licensed for TA Adapter. Service disabled.,Client,,,,,1000,ENAW-VXD21P,,
4375676,09/03/2014 03:15 AM,Audit,You are not licensed for Horizon Adapter. Service disabled.,Client,,,,,1000,ENAW-VXD21P,,
4375675,09/03/2014 03:15 AM,Audit,You are not licensed for MSSql Adapter. Service disabled.,Client,,,,,1000,ENAW-VXD21P,,
4375674,09/03/2014 03:15 AM,Audit,You are not licensed for OracleApps Adapter. Service disabled.,Client,,,,,1000,ENAW-VXD21P,,
4375673,09/03/2014 03:15 AM,Audit,You are not licensed for PeopleSoft Adapter. Service disabled.,Client,,,,,1000,ENAW-VXD21P,,
4375672,09/03/2014 03:15 AM,Audit,You are not licensed for Oracle Database Adapter. Service disabled.,Client,,,,,1000,ENAW-VXD21P..
after reboot our master server issue got fixed.. could you please help me to understand what was issue .. how to avoid this situation in future
Regards
Karthikeyan J

The fact that if you use 1280 it allows successful calls suggests your line is set as CPS , carrier pre select, if this has just happened it suggests a CPS provider has taken your 'line' for calls if not for line rental, but it's not properly set up otherwise calls would terminate it would just be billed by the mystery CPS provider
Have you had any approach by company's that sell this product ?, sometimes ISP's who's product includes calls can use CPS, if not, and you haven't been 'slammed' you need BT to set your line as non CPS , so BT handle your calls automatically without using 1280
This should be easy to get done, but the drones that answer the calls probably won't have a clue, hence the 'it must be your handset' nonsense they come up with, report the line faulty,don't accept an appointment, and insist they sent the problem to what was once called BT Operate, they look after the telephone exchange equipment and it's 'data',

Why Certified Freshers are not considered for Job Openings?

Similar Messages

Maybe you are looking for