Why CHIPS's wiring is not retaining ??

Hi Folks,
I have developed 2 WD components with CHIPS and connected with the inports of second CHIP with the Outport of the First Chip.
In the Configuration Mode, I am unable to set the Connection Between 2 CHIPS.
While running the application, I am able to set the connection b/w the chips and which is working for my User ID only.
For others, these connection properties are not reflecting.
What I need to do, In order to maintain these Connection Properties for all the Users..???
Regards,
Aneel Danda

>
danda aneel wrote:
> Hi Folks,
>
> I have developed 2 WD components with CHIPS and connected with the inports of second CHIP with the Outport of the First Chip.
>
> In the Configuration Mode, I am unable to set the Connection Between 2 CHIPS.
> While running the application, I am able to set the connection b/w the chips and which is working for my User ID only.
> For others, these connection properties are not reflecting.
>
> What I need to do, In order to maintain these Connection Properties for all the Users..???
>
> Regards,
> Aneel Danda
Hi Aneel,
probably you already know that.
Runtime if you make changes then it is user personalization and that is the reason it is not working for all other users. You can try doing a administrator personalization.
You can also try page builder to connect the two chips .

Similar Messages

Why is my wired keyboard not working?

Hi All,
Most of the time if I plug my wired keyboard (standard Apple w/numpad) before I start it up it works OK, however if it is unplugged whilst it is on, then plugged back in again it won't be recognised. Other non wired keyboards are fine. Even if I shut-down the MacBook Air ('13), plug the keybaord back in, then start up, it does not work. What's weird is that it normallys resets itself by the next working day (I only use the keyboard at work, take my Mac home).
Any help would be greatly appreciated, I miss having the two extra USB's!
Cheers,
Nathan

Good Morning SwimmingNathan,
If you are having issues with your wired keyboard, try a different USB port. Then try resetting the System Management Controller (SMC) and PRAM. Here's how:
Intel-based Macs: Resetting the System Management Controller (SMC)
http://support.apple.com/kb/ht3964
About NVRAM and PRAM
http://support.apple.com/kb/HT1379
If you tried all of these steps and your issue persists, contact Apple technical support or take your keyboard to the nearest Apple Store or Apple Authorized Service Provider (AASP) for diagnosis. If you plan to visit an Apple Retail Store, make a reservation at the Genius Bar using http://www.apple.com/retail/geniusbar/ (available in some countries only).
Cheers,
- Judy

Why does iPhoto (9.0/11) not retain the Event name when exporting more than one event? (using File - Export - Album name with number).

Why does iPhoto (9.0/11) not retain the Event name when exporting more than one event? (using File -> Export -> Album name with number).
Exporting a single Event retains the Event name which is what I'd expect. But highlighting more than one event and exporting it renames the images to Events 001.JPG, Event 002.JPG etc.
I was recently on holidays and had all my events nicely split on Dad's computer but when I went to export it I couldn't retain any of this information. Now I have to replicate this all again on my computer.
It wasn't possible to export the entire library as the external drive was fat32 format an I didn't want all of it. It would be nice to export a bunch of events to someone and have it retain the name.
Does anyone have a work around or will this be fixed at some point by Apple?

Why does iPhoto (9.0/11) not retain the Event name when exporting more than one event? (using File -> Export -> Album name with number).
Exporting a single Event retains the Event name which is what I'd expect. But highlighting more than one event and exporting it renames the images to Events 001.JPG, Event 002.JPG etc.
I was recently on holidays and had all my events nicely split on Dad's computer but when I went to export it I couldn't retain any of this information. Now I have to replicate this all again on my computer.
It wasn't possible to export the entire library as the external drive was fat32 format an I didn't want all of it. It would be nice to export a bunch of events to someone and have it retain the name.
Does anyone have a work around or will this be fixed at some point by Apple?

MP3 song information not retained after iTunes 7.0 - ID3 tags at fault?

I'm having some strange problems with track information in iTunes. I first noticed it when I tried to copy some mp3's from my Mac to my mobile phone: certain tracks did not retain the song information, like artist, album etc., while others did.
A similar problem has been discussed in this post:
http://discussions.apple.com/thread.jspa?messageID=3698498
However, my problem seems to be a little bit more specific.
If I look at the music in my library in iTunes, all the track information is there. However, for MP3's encoded after 16th October last year, the "Imported With" field, using Get Info, is shown as "Unknown". Before this date, it is shown as "iTunes v7.0". For all MP3's the ID3 version is v2.2.
I believe that I must have upgraded to iTunes 7.0.1 around this time, since I have a number of Apple Lossless audio files which have also been imported and don't show this problem.
The main problem is with the file ID3 tag information (I think). If I select one of the problem tracks, find the original file, open it up in Quicktime and "Get Info", no track/album/artist/composer information is displayed. This is NOT true for 1) MP3's encoded before 16th October 2006 and 2) Apple Lossless files encoded at any time.
In other words, the track information for songs encoded with iTunes 7.0.1 and later is either encoded in a way that no other application can read, OR is only being stored in the iTunes playlist, NOT the file itself. I can see all the track information for these problem files on my iPod, but NOT my mobile phone (where I have to manually copy them over), even if I drag and drop them directly from iTunes.
I have this problem with Quicktime, my mobile phone music player and RealPlayer, so I'm assuming it's "system wide". It even occurs if I copy a problem file out of my music folder and onto the the Desktop, then manually add the track to iTunes: all the song information has disappeared.
I have all my music stored on an external hard disk - 160GB Freecom ToughDrive formatted as HFS+. Previously it was stored on an external disk formatted as FAT32, but copying the files over to the new disk didn't change the problem.
I considered using the "convert ID3 tags" option to see if it would make a difference, but both the good and bad files are listed as using v2.2. I also don't understand enough about them to feel confident converting them to something different - perhaps to v2.3 or v2.4 - just to see if it makes a difference.
Any information on how to "recover" the missing information (for anything other than iTunes) would be greatly appreciated!
MacBook Pro 17" 2.16 GHz 2GB RAM Mac OS X (10.4.9) iTunes 7.1.1

Okay, some more information as I try and track down the source of the problem.
By using an id3 tag editing program - ID3 Editor - I was able to view the song information for each track, even though all the other music players I had tried would not show it. If I then chose to modify and update the ID3 information, this would somehow modify the tags in such a way that they become readable in all other programs.
I tried using the "Convert ID3" tags option in iTunes, just on a whim, but without any success. Saving the song information in ID3 Editor doesn't change the version of the ID3 tag - it's still listed as v2.2 in iTunes - but it DOES make it readable in other programs. I also tried the various text conversion options, again without any success.
This looks to me like a bug in iTunes. While its possible for me to get around it, in an extremely long winded way, I still can't understand why iTunes would be writing ID3 information that other Apple programs cannot read.
Any suggestions? Should I be posting this question in a different forum perhaps?

Reports not retaining carriage returns from htmldb_item.textarea

Im created a tabular form for multi row updates using htmldb_item.textarea for one of the fields. When I update the tabular form it keeps any carriage returns in this field, which is good. I then created a PL/SQL function body returning a SQL Query report for printing purposes. The problem is that the field populated by the htmldb_item.textarea does not retain any of the carriage returns in the report.
I enter the following in the textarea on the tabular form:
Line 1
Line 2
Line 3
The report I created then displays the data as:
Line 1 Line 2 Line 3
I need the report to display the data the same as it appears on the tabular form.
I tried this in my report from reading other similar situations on this forums, but didnt work.
replace("TEXTAREA",''||chr(13)||'',''||
||'') as title
Anyone know of a solution?

How about this?
Go the page where you can edit the report column attribute - here is the bread crumb to help you figure out what I am talking about
Home>Application Builder>Application 99999>Page Definition>Report Attributes>Column Attributes
The second box in this page is Column formatting, you will find 4 text boxes (Number / Date Format, CSS Class, CSS Style, Highlight words) and a text area (HTML Expression). In the text area replace #COLUMN_ALIAS# with <PRE>#COLUMN_ALIAS</PRE>. You will get your newlines without tweaking the query or removing Strip HTML. Strip HTML is a security feature that I would not disable. On the down side you will loose some of the ability to format like fonts etc (:-(,
Here is why you loose the newlines in the report. When browsers render html they have the liberty to reformat it. When reformating they can play around with whitespaces including new lines. To force a new line you have to use the BR tag or you can say the text is preformated using the PRE tags.

In Adobe Pro XI when converting an excel file to a pdf, the pdf is not retaining the page size settings. Has anyone found a fix for this?

In Adobe Pro XI when converting an excel file to a pdf, the pdf is not retaining the page size settings. Has anyone found a fix for this?

It shouldn't print each page as a separate job and
each tab has a different name, so, even if it did, it
ought to give the printouts the name of the tabs.
It doesn't print each page as a separate job unless the orientation is different - that's the bug. And the name of the job is taken from the name of the window, not the name of the tabs. That's how every application works, which, I think, is why Excel allows the specific selection or the active sheets to be printed.
Still, that does sound like a plausible explanation.
However, even if presented with multiple prints with
the same name, the spooler should print each one!
The spooler does print each one - you can watch the spooler process the multiple jobs. I think, though, that they are being overwritten since all the jobs have the name of the window as the job title. And since this happens after the Save Dialog is presented, there's really nothing the application can do. To Excel, it's one job, the multiple orientations don't matter; it's just that Apple doesn't handle it correctly.
As a workaround, you can print the selections one at a time and give them unique names and then rejoin them in one PDF file.

Adobe Acrobat X - Saved Background Settings does not retain Source File

Hello,
I am using Adobe Acrobat X on windows 7.
I have a pdf file that I use as a background source file. When I select the Settings profile from the Saved Settings drop down it does not load in the Source File. It still has "From Color" selected and <No Source File Selected> is in the path location.
No matter how many times I add the file and click the save settings button it will not retain it
I've already tried both a 'repair' and 'reinstall' of the software.
Any ideas as to why this might be happening?

Hi Adam Baranek,
I am looking into this issue and will get back to you soon.
Regards,
Rahul Tyagi

Volume settings not retained

Hi guys,
I have been having a problem with my Mac Book from the start. According to what I have read on the Internet my Intel based Mac Book should retain volume settings separately for my headphones and my internal speakers.
Meaning that once I have changed the settings for the volumes it should set the correct volume if I connect my headphones or use my internal speakers. This does happen and work normally.
However after restarting my Mac Book volume settings are not retained and once I connect my headphones the volume is set to 56%. Similarly this happens for my internal speakers as well.
This also describes my problem http://forums.macosxhints.com/showthread.php?t=88936
Could someone help me out with this, I have already reset my PRAM and NVRAM
So the option described on this page does not work for me.
http://www.macworld.com/article/53791/2006/11/intelphonevol.html
Message was edited by: W.R.R. Farid

I have suffered this problem too.
Both pair of my headphones, one came with iPod, are loud enough at 6%.
56% is surely going to kill my ears.
I've been googling around and found no solution.
But this is not the most depressing thing.
Let's take a look at this
http://support.apple.com/kb/TA24586
*Last Modified: March 08, 2007*
Obviously Apple was aware of this problem two years ago. And the only solution is to "adjust the volume level and balance as desired after restarting the computer."
Waht the __?!
This is not even a real solution.
Why wounldn't OS X just remember custom volume settings for headphones?
When are you going to correct this issue any way?

Tokenizer not retaining its value

Again another issue I do not understand! Would anybody understand this?
The Tokenizer does not retain its value!? Why it does not?
15,XCV, Some Other String, 10',389.5,4194.0
while ((rec = aPrintData[rIndex].toString()) != null){
     Iterator tokZ = new myNewGetToken(rec, patS, retD);
         for(; tokZ.hasNext();){               // here I got the value 15
              tokZorRetD = (String)tokZ.next();     // here I got "NULL"???
              if (tokZorRetD == null) {
                   patScount--;
                   mCount--;
              }else{
                   switch(patScount){
public class myNewGetToken implements Iterator{
//          class RETokenizer implements Iterator{
          private CharSequence in;
          private Matcher mt;
          boolean retD;
          private String delim;
          private String match;
          private int lastEnd = 0;
          public myNewGetToken(CharSequence in, String patS, boolean retD){
              this.in = in;
              this.retD = retD;
              Pattern pattern = Pattern.compile(patS);
              mt = pattern.matcher(in);
          public boolean hasNext(){
               if(mt == null){
                    return false;
               if(delim != null || match != null){
                    return true;
               if(mt.find()){
                    if(retD){
                         delim = in.subSequence(lastEnd, mt.start()).toString();
                    match = mt.group();
                    lastEnd = mt.end();
               }else if(retD && lastEnd < in.length()){
                    delim = in.subSequence(lastEnd, in.length()).toString();
                    lastEnd = in.length();
                    mt = null;
               return delim != null || mt != null;
          public Object next(){    // the value is not there anymore
               String result = null;
               if(delim != null){
                    result = delim;
                    delim = null;
               }else if(match != null){
                    result = match;
                    match = null;
               return result;
          public boolean isNextToken(){
               return delim == null && match != null;
          public void remove(){
               throw new UnsupportedOperationException();
     }I renamed it because I might need to modify or find out why it does not keeps the value!

dubwai, I am sure you doubt the programming solutions
that I come up with BUT while I run into many problems
to get the results right it seems like that has to be
done what the man has to do!I don't doubt it. I'm 100% absolutely sure that your 'fix' doesn't change anything.
Let me explain line by line:
tempToken = tokZ.next();   // do Not convert do Not cast, keep it as ObjectThe Object is what it is. Casting the Object doesn't change it. All it does at runtime is check to see
that the given Object is String or what ever you cast it to: Try the following:
Object o = "test";
String s = (String) o;
System.out.println("o and s are the same Object? " + o == s);
tokZorRetD = (String)tempToken.toString(); // Now, convert and cast
// would that have to do anything with StrongTyping?Given that your previous code was not throwing a ClassCastException, the Iterator is already
a String. Calling toString on a String just returns this:
String s = "test"
System.out.println("s.toString returns s? " + s == s.toString());Also, toString returns a String. There's no need to cast a String to String.
And if s is null (which it appears to sometimes be) calling toString() will throw a NullPointerException.
In short, if your code has been fixed, it was something else.

I am using CS6 and when I go to save an image for Web the image does not retain its quality

I am using CS6 and when I go to save an image for Web the image does not retain its quality. The first week I did this it worked just fine and now the images save very pixely.
Here is a screenshot of my image on the artboard as I am editing it
Here is a screenshot of the image as I'm trying to save it for Web
As you can see, the image becomes pixely. I have tried to save it as every type of png and jpeg but nothing seems to work. I have no idea why it has started to do this. Please help!

Change None to Art optimized then click apply(alteast in CS5 there was an apply, believe they removed that in CS6 as so many people missed that part).

Album art not retained after pasting

No matter how many times I paste the album art into iTunes (in both the display area and in the area provided under get info for the song), it does not retain it. It shows up upon paste, but then it does not stay. Playing the song back in iTunes or on the iPod will then also not show the art. Why won't iTunes hold the pasted art in the song file?

#1 When using the little bottom left windows to paste artwork make sure it reads "Selected Song"
#2 Make sure that you have got read & write access to the audio-track you want to alter.

Windows not retaining settings after 10.4.11 update

Hello everyone,
I just updated my PowerBook G4/667 Titanium to Mac OS X 10.4.11 (from 10.4.1) and everything is working fine but there is one annoying problem. Every time I restart, when I open some of the windows on my computer, they do not retain their settings - settings like the list view and window size, for example. Some folders DO retain their settings when I open them and some don't (like the Applications folder and the Macintosh HD folder/window which I have to reset every time I restart).
I have to keep setting them to list view every time after a restart. How can I fix this so that they stay the same all the time? Does this have anything to do with the invisible .DS_store files? I don't understand why some windows retain their settings and why some don't.
I've repaired permissions numerous times. Cleared cache files. Tried setting the "global" view from the Finder > View > Show View Options to "All Windows". Tried everything I know.
Can someone please tell me what I can do to fix this?
Thanks so much,
Gerard

Hi Gerard, and a warm welcome to the forums!
Safe Boot , (holding Shift key down at bootup), use Disk Utility from there to Repair Permissions, move these files to the Desktop.
/Users/YourUserName/Library/Preferences/com.apple.finder.plist
/Users/YourUserName/Library/Preferences/com.apple.desktop.plist
Then reboot once more.

Why does "autofill from playlist" not work?

I have tried to autofill music onto my iphone from a playlist, but it will not allow me to, and gives a really unhelpful error message:
"iTunes cannot add any songs to the iPhone “x” because no songs in the playlist “x” can be copied to this iPhone."
I have autofilled music from the same playlist onto my phone before but this has never happened.... I have also seen this question asked before but with no answer as to why it does this or how to fix. Its really annoying and i'm pretty sick of spending hours searching for answers as to why itunes doesn't work every single time i want to put a new song on my phone. There may be a simple fix to this problem, but with absolutely no information as to why it happens it turns everything into an ordeal. nothing has changed with my phone or the itunes version since the last time i used autofill on this playlist. Another thing i have noticed is that when some music does copy over it does not retain any information regarding "skip when shuffling", so the box is always unchecked even when it is checked on itunes. I have looked for solutions to this and similar problems to no avail. I am so sick of this messing around - either use helpful error messages or fix ur frekking errors!
The worst part is this will probably just start working again for no discernible reason, like always i will still be confused and worried about whenever this may happen again. Thanks itunes!!

When I get the low on ink message I can usually still print, so I don't think that's the problem. Double tap the home button and see of the Printer app icon is in the recents tray. If you see the icon, hold down on the icon until it wiggles and tap the minus sign in the corner of the app to close it. Tap the home button twice.
Then unplug your router for about 30 seconds. Disconnect it from power, don't just press a reset button if it has one. Plug it back in. Then unplug the printer from power for about 30 seconds the same way - don't just turn it off using the power switch. Plug it back in. Reboot your iPad and then try again.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

Does not retain sort state

App Store does not retain sort state when returning from viewing an individual app to the full list of apps. If the full list spans more than one page, the page you were on is also not retained.
I have no idea if this is a bug, a feature (or lack thereof), or an oddity on my computer. Since I can't find any other way to request a feature or post feedback to Apple, I'm putting this here.
If by some chance this is an issue with my computer only or I'm missing some preference somewhere (ha!) I'd appreciate any help provided by the community.
-s

Yes, it is indeed VERY frustrating that the App Stores don't return you to where you left off browsing if you stop to click on an app to read more about it. Once you're done reading about an app that interests you, you're dumped right back at the beginning. So, just to get back where you were, you may have to plow through ten pages of apps. I get so fed up with being whisked back to page 1 all the time that I just give up and leave the App Store in disgust. I hate wasting my time paging backnthrough all the apps I've alread covered. ALSO, when looking over GENIUS recommendations on the App Store, why is it that even when I click on NOT INTERESTED for a given app, the app just stays there? It's like my clicking NOT INTERESTED has no effect whatsover. What's the problem with the App Store?

Why is my cache results not highligted anymore?

why is my cache results not highligted anymore?

When I do a word/s search.
Normally the words I typed and searched on Google will be highlighted in different colors each word at the top of the webpage.
The same color will be highligted for each word/s whenever they appears all throught out the page. when I open it as cached.
Now the words don't highlight any more and no color even.
Here below info from About.com about what I am asking about:
http://google.about.com/od/searchingtheweb/qt/cache_syntax.htm
''''''Highlight Keywords With Google Cache Search''''''
Find Specific Information Faster With Google's Cache
By Marziah Karch, About.com Guide
Is it hard to find a specific piece of information on a large Web page? You can simply this by using Google's cached page to highlight your search term.
As Google indexes Web pages, it retains a snapshot of the page contents, known as a cached page. When a cached page is available, you'll see a Cached link at the bottom of the search result.
Clicking on the Cached link will show you the page as it was last indexed on Google, but with your search keywords highlighted. This is extremely useful if you want to find a specific piece of information without having to scan the entire page.
Keep in mind that this shows the last time the page was indexed, so sometimes images will not show up and the information will be out of date. For most quick searches, that doesn't matter. You can always go back to the current version of the page and double check to see if the information has changed.

Why CHIPS's wiring is not retaining ??

Similar Messages

Maybe you are looking for