Why CompactRio always disconnect from my host after deployment?

I have the following program that I try to run as a real time program in the compactrio 9002:
The problem is that always that I try to run this program without any debugging tool the compactRio disconnects from my host and I have to reset it. But if I use the "HighLight Execution" tool it works perfectly (except for the fact that It is really slower) doesn't show any error.
Does anyone know what am I doing wrong?
Thanks in advance,
Tito Coutinho Melco.

Welcome to the Apple Community.
Intermittent problems are often a result of interference. Interference can be caused by other networks in the neighbourhood or from household electrical items.
You can download and install iStumbler (NetStumbler for windows users) to help you see which channels are used by neighbouring networks so that you can avoid them, but iStumbler will not see household items.
Refer to your router manual for instructions on changing your wifi channel or adjusting your multicast rate.
There are other types of problems that can affect networks, but this is by far the most common, hence worth mentioning first. Networks that have inherent issues can be seen to work differently with different versions of the same software. You might also try moving the Apple TV away from other electrical equipment.

Similar Messages

Facebook is always disconnecting from Safari ?

Facebook is always disconnecting from Safari ?

What OS are you using? Your profile shows 10.6.
Try another browser as a test.
Firefox

Why would iSight "disconnect" from the computer during iMovie recording?

I was just in the middle of recording a song, got to around 7 minutes when all of a sudden the iMovie recording panel went to blank with a big red sign saying "NO CAMERA CONNECTED". When I went back to the little drop down menu to record and selected "iSight built in" it allowed me to record again.
What could cause this? I am running very low on disk space ATM, somewhere in the region of 200MB left until I transfer all my recordings from today onto my external, could that have something to do with it? Maybe not enough virtual memory space left to run the camera?
Although in fairness I have 2GB of RAM and nothing else is running except one window in Safari (with only text) and a youtube window in Firefox...
Anyone know? And is there any way to prevent this from happening? I assumed since iSight is built in it couldn't "disconnect" from the machine, and in the middle of filming? Seems very odd...

Insufficient disk free space can certainly give trouble:
http://docs.info.apple.com/article.html?path=iMovie/HD/en/im37.html
With only 200MB left, you definitely need to free up some space-think 10s of gigabytes free if possible:
http://docs.info.apple.com/article.html?path=Mac/10.4/en/mh1968.html
If you need still more space, some of the ideas from the 10.6 Help version of this file be helpful:
http://docs.info.apple.com/article.html?path=Mac/10.6/en/8358.html
EZ Jim
Mac Pro Quad Core (Early 2009) 2.93Ghz w/Mac OS X (10.6.2) MacBook Pro (13 inch, Mid 2009) 2.26GHz (10.6.2)
LED Cinema Display G4 PowerBook 1.67GHz (10.4.11) iBookSE 366MHz (10.3.9) External iSight

Why my MacBook Disconnect from the Internet?

When I do something like playing a downloaded game, my Internet disconnects. The other devices in my house work fine, but my MacBook does not. I am using a Mac( Version 10.6.8) without Snow Leopard. Any advice?

Hello, supremedsi!
The following article has some useful information that may be relevant.
Troubleshooting Wi-Fi issues in OS X Lion and Mac OS X v10.6
http://support.apple.com/kb/HT4628
Symptom: The network connection drops unexpectedly
Your Mac may not not stay connected to your Wi-Fi network reliably.
Your Mac may stop accessing the Internet during use.
Solution
Use these steps if your computer disconnects from its Wi-Fi network unexpectedly.
Check your range to the Wi-Fi router and reduce the effect of interference.If your computer is too far from your Wi-Fi router or your environment has too much Wi-Fi interference, then your computer may not detect the Wi-Fi network properly. The easiest way to check for range limits with your Wi-Fi network is to move your computer or your Wi-Fi router closer together and make sure that there are no obstructions (such as walls, cabinets, and so forth) between the router and your computer.See Potential sources of wireless interference for more information about interference and solutions.
Try connecting to a different Wi-Fi network. If your computer works fine when connected to a different Wi-Fi network, then the issue may be related to your network router or ISP. In that case, contact the manufacturer of your router or your ISP.
Best regards,
Allen

IChat 5 - I am constantly disconnected from video chats after SL install.

Before installing Snow Leopard (For me that was just plain Leopard) I had no issues of video chats messing up. Now, after the installation (note I am running iChat 5), I am having the issue of iChats just either freezing up and showing the "No data has been received in the last 10 seconds" message, or more frequently what happens is the whole program just shuts down. It throws the "Unexpectedly quit....do you want to Ignore, Relaunch, or Report" message.
Please help me with why this may be. Thank you.

Hi,
It is possible fro the Application crash to be Router related.
I once had someone test with me who said they could crash anyone else's iChat and proceeded to crash mine with a Video Invite. It stands to reason it may also cause the Sender's end to Crash.
However this is one of thousands of people how have tested with me over the last 5 years or so.
Error messages that say "NO Data Received for the Last 10 Sec" in the Video Chat Window (Error 20 if you open Details) and in the Connection Doctor (Video menu) would point towards a possibly loss of Internet Connection.
Pauses in getting a web page loaded or Mail in taking a long time to get new Mail even if one message (the spinning whirly thing for too long) would be other clues.
Longer breaks would cause the Buddy List to Collapse and say you were disconnected.
Seeing a download pause in a Web Browser would also provide clues.
If you have a Router and a Modem powering them Off and then powering Up the modem again and waiting to allow it to re-establish Connection then the router then the computer may be one way to reset things.
9:20 PM Wednesday; October 7, 2009
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"

Firefox disconnects from the internet after a while

Hi,
i have the latest version of firefox and in the recent days i have been experiencing a very annoying issue. My computer is on and connected to the internet for many hours a day. This has never been a problem so far but now i have noticed Firefox suddenly becomes unable to connect to the internet after a while of being on. No page will finish loading no matter how long i wait.
I try by closing and reopening Firefox and I get an error saying Firefox is still running and that i need to close it and when i close that error then i get another error saying it was unable to load my profile. I close that and reopen Firefox which at the beginning works normal again but after 3 or 4 minutes it disconnects again. I repeat the whole process and i still get the same results until i restart my computer.
No other programs have this problems only Firefox. What can i do?
Thank you.

Boot the computer in Windows Safe mode with network support (press F8 on the boot screen) as a test to see if that helps.
*http://www.bleepingcomputer.com/tutorials/how-to-start-windows-in-safe-mode/
It is possible that your security software (firewall, anti-virus) blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full, unrestricted, access to install for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.org/kb/Server+not+found
*https://support.mozilla.org/kb/Firewalls
*https://support.mozilla.org/kb/fix-problems-connecting-websites-after-updating
Do a malware check with several malware scanning programs on the Windows computer.
Please scan with all programs because each program detects different malware.
All these programs have free versions.
Make sure that you update each program to get the latest version of their databases before doing a scan.
*Malwarebytes' Anti-Malware: http://www.malwarebytes.org/mbam.php
*AdwCleaner: http://www.bleepingcomputer.com/download/adwcleaner/ http://www.softpedia.com/get/Antivirus/Removal-Tools/AdwCleaner.shtml
*SuperAntispyware: http://www.superantispyware.com/
*Microsoft Safety Scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx
*Windows Defender: http://windows.microsoft.com/en-us/windows/using-defender
*Spybot Search & Destroy: http://www.safer-networking.org/en/index.html
*Kasperky Free Security Scan: http://www.kaspersky.com/security-scan
You can also do a check for a rootkit infection with TDSSKiller.
*Anti-rootkit utility TDSSKiller: http://support.kaspersky.com/5350?el=88446
See also:
*"Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked
*https://support.mozilla.org/kb/troubleshoot-firefox-issues-caused-malware

How to disconnect from the Database after signing out in ADF

I'm using JDeveloper 10.1.3 to develop ADF and JSF applications on Oracle Database.
I'm using dynamic credentials, the user can connect to the database as the database user. So different users can be connected to the database when you check the current database connections in the V$sessions. I'm using application pool.
Upon signing out, i want to kill the Database connection associated with the application model that the user was using.
I tried both the resetState() in the DCDataControl and invalidateSessionAndRedirect() but they both perform session timeout and move the application model back to the pool together with connection so that if another session with the same username/databasename couple is opened , then it can use the same application model in the pool.
In my case, i want to disconnect and remove the Database connection from the V$sessions upon siging out.
Thanks

Hi,
Thanks for your reply,
Refering to the document "Understanding Application Module Pooling Concepts and Configuration Parameters" by Steve Muench,
If jbo.doconnectionpooling=true, then each time a user session finishes using an AM (typically at the end of each HTTP request), the AM instance disassociates itself with the JDBC connection it was using on that request and it returns it to the JDBC connection pool.
I don't want to unplug the AM from the Database connnection and move it back to the database pool when each request is finished.
I want to disconnect the Database connection and remove it from the v$session upon signing out from the application, NOT only move it back to the database pool.
I want this because i use dynamic credentials and when the user X1 signout from the application and user X2 signs in, it will NOT use the database connection that was used by X1 because the application connects as the database user. In other words, 2 database connection will be found after this scenario.
Thanks,
Amr

Cisco APs get disconnected from cisco WLC after 30 min when connected on Juniper SRX

Hi,
I am connecting all my Cisco 1131AG APs via Juniper SRX 240 box and Cisco WLC is placed in the LAN.
We are running LWAPP in layer 3 mode. The APs get dissassociated form the WLC after 30 min.
The Setup is like :-
AP->AccessSwitch-->JuniperSRX(reth2.0)-->JuniperSRX(reth1.0)-->CoreSwitch-->CiscoWLC
could anyone please help me to resolve this issue.

Firmware for WLC is AIR-WLC4400-K9-4-2-99-0
Firmware for AP is 12.4(10b)JA1
The logs form WLC during disconnection :-
Mon Sep 6 20:05:52 2010 AP Disassociated. Base Radio MAC:00:1f:ca:2d:4e:a0
1 Mon Sep 6 20:05:52 2010 AP's Interface:0(802.11b) Operation State Down: Base Radio MAC:00:1f:ca:2d:4e:a0 Cause=Heartbeat Timeout
2 Mon Sep 6 20:05:51 2010 AP Disassociated. Base Radio MAC:00:1f:9e:c1:0d:30
3 Mon Sep 6 20:05:51 2010 AP's Interface:0(802.11b) Operation State Down: Base Radio MAC:00:1f:9e:c1:0d:30 Cause=Heartbeat Timeout

Why has EE vanished from my iPhone after updating to iOS8?

Hello,
I have an iPhone 4S and I am on a T-Mobile contract, EE has always been the network provider until I updated from iOS7 this morning to iOS8 and now T-Mobile is the provider, and the signal on 3G is naff! It's good on WiFi but I travel a lot and use my mobile data, how do I get EE back?

Sorry to disappoint but there is no iOS 10.3...

My Nano it always disconnect from my pc

I have buy Nano today ( 03 July 2008 ), but when im connecting the nano to pc is always written this text " ok to dissconect ", please somebody help me, i can not sync the music and the other...
its NEW,...
sorry for my bad english,.... im indonesian,...

I may have misread your post. If you are trying to remove the photos synced from your computer you should be able to do this by unchecking Sync Photos on the Photos tab and syncing. If you did this and the photos are still there then something failed. You might try rechecking Sync Photos, syncing, then uncheck Sync Photos and syncing again to see if it works this time.

UCCX 9x - Calls not Disconnecting from Agent Desktop after hangup

I have a Team of agents and 3 of them are experiencing the same issue. They will get a call and once it hangs up, the call state remains "connected" in the agent desktop. Then they get a second call it shows up "connected". So even though there is only 1 call active, it shows the 2 connected.
The IPCC extension is only assigned to one device, the correct line is assigned to their user. The max calls busy trigger is 2:1. I have had a TAC case open for almost a week and initially they thought it was the "connected" state in my script. I made the change and still issue persists. I haven't gotten anywhere with them after sending MIVR loges, etc
I have done some additional searching and haven't found anything.

Hi,
well, I can only assume TAC already told you what debugging levels to set.
Would you mind do a test call again, collect the logs and post them to here? I am not saying I am any better than TAC but I might get an idea while taking a look at the trace files.
Thanks.
G.

AppleTV2 disconnecting from iTunes 11 after updates.

I have AppleTV2 connected to iMac and TC (library) by ethernet. All devices running latest firmware or OS
Since iTunes 11 update, the appleTV is consistently dropping it's connection to iTunes while watching content. It lasts as little as 5 mins and as long as 20 mins.
It's really starting to grind my gears.
Anyone had this problem so far or have a solution for it?

Yep I did have the same issue.
Go to 'system preferences' , ' energy saver' and apply the following settings:
I did this the day after itunes 11 was released and didn't had an issue since then.
Hopes this works for you,
Frans van Wessel
Helmond
The Netherlands

Why would mac disconnect from a wireless printer used for years?

The printer used is a Brother, and the reports show that the WLAN is ok and the network configuration is all set up. restarted printer and computer. Deleted printer and tried to add it again and Mac won't do anything. connection with the printer is lost.

Hi,
I'm not sure about the cause of your problem and I'm no expert, but since you only seem to have trouble when you awake the mini, let me give you a few ideas...
On the D-Link Home/DHCP: what is the lease time of the DHCP server? If it is short, try setting to 1 week. Maybe your lease expires while your mini is in sleep mode and then your mini can't get a new IP since it is already "connected"?
On the D-Link Advanced/Performance: what Preamble Type is selected? Short Preamble has given me trouble in the past, so try changing it to Long Preamble, which seems to work better with Macs.
My Mini is connected to a D-Link DI-624 and it has always worked like a charm, but I don't put my computer to sleep for long periods of time (couple hours at most), so I never experienced that problem.
Good luck!
Guylaine
Mac mini Intel Core Duo 1.66 GHz 512MB DDR2 SDRAM Mac OS X (10.4.8) G4 Digital Audio Mac OS 9.2.2, iPod nano 1GB, iPod nano 4GB

PC disconnects from VPN after several hours, can't reconnect until PC reboot.

Hi,
I started using a private VPN for video gaming in general since last month, but I've started running into a problem I cannot fix... my PC tends to disconnect from the VPN after a while (6~12 hours of use?) and I can't reconnect to any VPNs until I reboot my
PC.
However.. my normal internet connection seems to work fine.
When I try to reconnect to the VPN after I get dropped, I'm welcomed by this error:
http://puu.sh/bicqT/0a6f1f8537.png
I'm on Windows 7 64bit and I use the default windows VPN client... idk what's it called, it's what you setup in the network and sharing center.
I've tried the following things:
*restart network adapter
*diagnose the issue with windows 7 network diagnostics
*/flush DNS cache
*/release and /renew lease
*reset internet connection
*using a neighbor's internet connection and I'm still unable to connect to any VPN until PC reboot.
-- diagnosing the wireless adapter after the disconnect from VPN happens leads to this...
http://puu.sh/bibQs/9873c02068.png
http://puu.sh/bibn7/93ec6f0934.png
http://puu.sh/biboF/3c9f865f15.png
http://puu.sh/bibpw/b204c59f01.png
http://puu.sh/bibq9/a10d3246d1.png
I cannot repair it through diagnostics.
Anyway, it's a problem on my end because I share the VPN with 2 other friends and they don't experience this problem... >_<
If there's any information missing, please tell me and I'll provide.
Thank you for any help!

Hi,
could you tell me do you run more than one VPN connection on your PC?
Did you try to delete and re-configure the VPN?
What type of security software are you using? Any kind of software which might block the traffic or close the port in case it thinks that something fishy is going on?
Could you determine which manufacturer is your Wireless card, visit their website and download the latest drivers directly from their site. Or if you are using laptop, visit manufacturers website and download wireless drivers.
You can try to update the drivers manually.
What about that 'Enable logging' thingy? Can you enable it and when the next time disconnection happens, you might determine what is the exact issue with the VPN.
Please click on Propose As Answer or to mark this post as and helpful for other people. This posting is provided AS-IS with no warranties, and confers no rights.

PAD DISCONNECTS FROM WIFI AFTER A SHORT TIME HARD RESTART IS REQUIRED TO CONNECT AGAIN

MY IPAD NEEDS TO BE HARD RESTARTED EVERYTIME BEFORE I CAN ACCESS MY WI FI ANY IDEAS?

Franco Solerio wrote:
Since I updated to iOS 5.1 my iPad (1st gen) disconnects from WiFi network after 30 minutes. I did a full system restore with iOS 5.1 and the problem persists.
How to replicate:
Disable auto-lock
Connect to wifi network
Open an app that continuously does network activityYou might for example run a shoutcast webradio streaming app and start listening to some music
Leave the iPad running and turned on
After approx 30 minutes wifi drops and your music app stops the stream
This happens to me every time, after approximately 30 minutes, with either the iPad on USB charge or disconnected from charge.
Used to run apps connected to wifi regularly for hours and never had this problem before the upgrade to 5.1
I already tried to:
Restore network settings
Completely wipe and restore iPad to 5.1
Reboot wifi router
My router is a Netgear 834 G
try updating your router firmware http://support.netgear.com/app/products/family/a_id/1288

Why CompactRio always disconnect from my host after deployment?

Similar Messages

Maybe you are looking for