Why computer battery not charging?

Why computer battery not charging?

maybe you are running so many programs that it can only provide enough power to keep the macbook running and not actually charge it
happened to me once
but we really need more info to give you an answer, i mean theres many more reasons but we need more info to narrow them down

Similar Messages

  • WHY DOES IT SAY BATTERY NOT CHARGING WHEN I TRY TO CHARGE MY IPAD??

    WHY DOES IT SAY BATTERY NOT CHARGING WHEN I TRY TO CHARGE MY IPAD ???

    How are you trying to charge it, via a computer or the wall plug ? If a computer, then a lot of computers (especially older ones) generally do not provide enough power to their USB ports to charge the iPad at a sufficient rate - it may still be charging slowly, and should be a bit quicker if the iPad's screen is off (if you leave it for a while and then disconnect it from your computer you may find that it's battery percentage has gone up). The wall charger is usually the most efficient way to charge the iPad.
    If the wall charger then have you tried a reset to see if it charges after the iPad has restarted ? Press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
    If that doesn't work then have you tried a different charger and/or cable ? Do you know anybody else with an iPad so that you can try their charger and cable and they can try yours ?
    And for info typing in capitals is considered SHOUTING.

  • Why is my wi-fi greyed out?  Why does battery not hold charge for more than a few hours?  All since IOS7.

    Why is my Wi-Fi greyed out?   Why does battery not hold a charge longer than a few hours?  All since upgrade to IOS 7.

    To validate the operating system and radio software complete the following steps:
    Tap Settings > About.
    In the Category drop-down menu, select  OS.
    Ensure the Radio Version is only 1 number higher than the  OS Version.
    If not then follow this
    http://www.blackberry.com/btsc/KB34666
    Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
    Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
    Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
    BESAdmin's, please make a signature with your BES environment info.
    SIM Free BlackBerry Unlocking FAQ
    Follow me on Twitter @knottyrope
    Want to thank me? Buy my KnottyRope App here
    BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V

  • Why iPad does not charge battery when is connected to my laptop?

    why ipad does not charge battery ehen is connected/sync to my laptop?

    Because most USB ports do not put out enough power to meet the iPad's minimum requirements. An iPad is best charged plugged into the wall with the supplied charger.

  • HT1476 why is battery not holding a charge

    why is battery not holding a charge

    How long does a full charge last and what is the iPod doing during that time?
    Could be a bad battery

  • No AC Power, Battery not charging, Windows boot up issue

    Searched the forums but could not find an answer for my specific problem.  
    COmputer: L355 - S7905
    Windows XP Professional
    Issue: installed new motherboard.  When on AC power, laptop shows a steady green LED light but will not boot up without the battery installed.  Will not stay running when the battery is removed or dies.  When plugged into AC power, battery charging light is on but battery continues to lose power; will not charge.  Had the computer operating properly initially but noticed the power issue.  I ran a chkdsk on one of the subsequent boot ups and now have a "config.sys file missing" error and can not get into windows any longer.  I was going to try some of the battery charging suggestions listed on this forum but no longer can get into windows or the recovery council.  Last screen attainable says to select "R" to repair system using a Windows disk.  Can not get to a DOS prompt.  
    Status so far:
    - Ran volt meter check on power adapter and getting steady 19 volts.  Various motherboard checks with a voltmeter are seem normal.
    - All LED lights on laptop are indicating the computer is working in a proper state (ie power light on, batt charging light on, HDD light on when in use, etc)
    - replacement motherboard is the EXACT same motherboard as the original.  Same model - identical.
    - Can get passed BIOS screen successfully; can get into boot options screen (Safe Mode options, command prompt, etc) but all options eventually default to an error message I get from the chkdsk program and I can not go any further.  
    - Laptop did not come with an original Win XP restore disk.
    - Battery is a replacement but is the exact same part number as on the Toshiba original battery.  Battery seems to be operating perfectly once it is charged (had to go to computer accessory store for charge)
    Questions:
    - Why is the AC power only not able to run the laptop??  Is it a software issue??
    - Once I can get into the windows OS, I presume I should be able to correct the battery not charging issue . . . is that right??  Sounds like it is a software issue from what I have read on the forums.  My plan was to reinstall the Windows operating system but I can not do that on battery power alone.
    Any suggestions on how to proceed??
    Thank you - Paul
    Solved!
    Go to Solution.

    Lawrence - Your suggestion was right on target, the replacement adapter solved my power problem.  I would have never believed that to be the problem since the digital voltmeter was indicating the required 19v from the defective adapter, I would obviously NOT have figured this out on my own.  Thanks for your time, response and help on this issue, I really appreciate it.
    Paul

  • "Battery Not Charging"... Cold weather problem

    I think I have figured out that that charging device does not work when the computer is cold.
    This is the 2nd time it has happened. I reset PRAM and PMU with no change. Then later it spontaneously fixed itself when the sun started hitting the van. Thinking possibly when the computer is cold it happens, since it was 17º this morning and the computer was asleep all night. I had run the battery that evening depleting it totally. However, the night before it was -11º and the problem did not happen, possibly because I had left it running all night with no disk spindown.
    Also, looking backwards at Oct 29 of the first occurrence, yes we did have a cold spell and a snowstorm, I remember now it hit about 17º.
    So it seems like this is a problem when the charging device is cold (actually my cellphone does the same thing). The solution would be to keep the disk spinning full time while it is below about 25º. Or maybe even put some insulation over the computer.
    I had a 1.6 PowerBook earlier that never showed this problem. It charged normally down to -5º. So perhaps this is an Intel oddity.
    I realize I am running the MacBook at 63º below tech specs, so please refrain...

    I think I have the same problem. Macbook Pro indicates shortly it doesn't charge, then turns to charging. But the last time it stuck to 'battery not charging'. Then I played for about fifteen minutes, warming up the video card (and it does get warm) and now it charges again.
    It remains a strange problem and I will see the MacStore about it.

  • The Mac Book Pro is not charging. The led is green with the connection and the computer is not charging. Thank you for the help

    The Mac Book pro is not charging. The led is green with the connection and the computer is not charging. Thank you for the help

        Reset SMC.     http://support.apple.com/kb/HT3964
        Choose the method for:
        "Resetting SMC on portables with a battery you should not remove on your own".
    If this does not help, contact Apple.
    Best.

  • Battery not charging when plugged in

    I have a Pavillion g6-1d11dx laptop and I have two problems (and I don’t know if they are related). First, I have been having trouble with the battery not charging while it is plugged in to the AC outlet. The battery icon in the systray currently says “40% available (plugged in, not charging)” and the percentage has been consistently going down over many weeks. Most recently, when I unplug it from the AC it no longer goes to battery reserve, it just loses power entirely (and when I plug it back in and turn on the power I get the “system was not shut down properly…” message).
    Second, and I don’t know if this is related, but for several weeks the fan has been running, seemingly non-stop, especially overnight. I don’t know if it’s relevant, but I have a scheduled nightly (1 am) definitions update and full scan that usually takes about 2 to 2-1/2 hours. But my wife says no matter when she gets up in the middle of the night, the fan is always running, and the unit has been very hot. My wife has been concerned about a fire (though it's not a model listed in the recall). I downloaded a BIOS update from the HP website hoping that would help. The fan seems to have been running less, but hasn’t stopped entirely.
     I wanted to see if I could detect any problems with the battery, so I went through all the suggested troubleshooting protocols listed on the HP website, but ran into a hitch when I tried to use the HP Support Assistant utility on the laptop. When it opens, the Support Assistant displays "An error occurred" (instead of "Support Assistant") in the window's title bar and the system variables ([Product Name], [Serial Number] and [Product Number]) listed in the Support Assistant status bar all say "Loading...", but never do load. When I go to the Maintain mode to check the battery status, it says "No pending action", and, as suggested on the HP website, I click the Refresh button (then, in the pop-up window that appears, I choose the “Check all updates, but install only important updates automatically” radio button, then click OK). But while the result page displays “Pass” on the checks for “Connect to HP servers” and “Preparing the action list”, it displays “Fail” on the checks for “Downloading updates”, “Gathering information” and “Analyzing your system”. Oddly, when I run the system check from te HP website, it DOES auto-detect my system info (Serial Number: 5CG21919LT; Product Number: B7S84UA).
     I tried to open the HP Connection Manager utility, but I get the HPConnectionManager.exe fails to load ("Cannot load assembly: CaslShared, Version=3.5.1.1, Culture=neutral,  PublicKeyToken=9c6f83d5b7f3d097. The application will now exit.").
    Can someone tell me how to properly connect to HP to allow the utilities to do their diagnoses? And/or why my battery isn’t charging and I can’t get a system diagnostic?

    I should note that this unit is pretty new: purchased in august 2012.

  • HT1338 battery not charging.  Suggestions?

    Battery not charging.  Computer turns off completely when disconnected from power cord.  When plugged back in, the screen comes up gray at first and then as to regular screen.

    How old is your MacBook and what is the condition of the battery: click the apple in the left corner of the menu bar, About This Mac, More Info, System Report, Hardware, Power...then battery Condition, Capacity, Cycle count, and Voltage.

  • Endless Switching between Adapter and Battery/Not Charging

    My battery is from fall of 2007 (I received it during the recall.)
    The little battery icon on the top of the screen is endlessly flickering between the charging symbol and an almost dead battery symbol. If I open energy saver, it tells me that the computer is switching back and forth between the two power sources: my Power Adapter, and my battery, with my battery perpetually stuck at 1%. This seems to me to be more than just the battery not charging, but since my computer is indeed running off of the adapter, I wanted to see if perhaps this was just its way of telling me the battery is no longer charging. Also, any advice on getting the battery to hold something, at least for a little longer (my new job gives me a computer in August, so I'm just trying to stretch this one as much as possible.)
    Thanks in advance!

    BUMP -
    I'm having a similar problem. Will keep scanning the older posts on this board, but:
    I just replaced a lost MacAlly G4 Adapter with a new one (MacAlly). It charges the Powerbook when I leave the computer shut-down (so I'm not screwed ...), but when powered-up with the adapter plugged into the G4, the battery symbol alternates between the charging symbol & the battery status symbol - and slowly drains. The screen also dims & brightens.

  • Why notebook be not charging always?

    The battery is not charging for days.All configration are deafult while restart.why?

    The battery begins charging when it's at 94% or less.

  • IPod battery not charging unless in speaker-dock

    I have my iPod 5g (60gig) for about 2 years now. About 2 months ago the battery started to act up.
    It would very suddenly discharge completely (I noticed that my room had gotten unusually cold before the first of these failures). The ipod would not respond to buttons, and plugging it into the computer dose not charge it.
    After some trying i discovered that the ipod would charge again if pluged into an i-station speaker-dock, and after 2 or three minuits in the i-station it would also charge fine from my ibook.
    About 2 weeks ago the battery on my ipod again got itself completely discharged. As i did not have access to an istation i was unable to recharge it since.
    Today I bought a belkin usb-wall charger with ipod cable that is marked as 'made for ipod' and states clearly that it is ipod video compatible at walmart (i'm on holidays in the US) and have been trying to use this to recharge my ipod, however the charger is not helping.

    I received a 4th Gen 20GB iPod (around 2 years old)from a friend and asked me whether I could fix it for him, which has been left untouched as a paper-weight for almost 2 months.
    I tried to turn it on, and the screen was completed blank and the device looked dead. Before doing anything I prepared the following:-
    1. A window based PC
    2. A Mac computer
    3. An USB iPod cable
    4. A Firewire iPod cable
    5. An iPod AC charger
    As the iPod was previously formatted on a PC, therefore I tried to plug it with a PC via USB cable, it did not response and not able to get recognized by the PC. I ejected the iPod and connected with an AC charger, after a few minutes, I did a Reset for the iPod
    How to reset iPod
    http://docs.info.apple.com/article.html?artnum=61705
    The iPod showed an Apple sign, it stuck there for almost a minute, the screen then showed a battery with an exclamation mark sign, and after a minute, the iPod turned off itself. I was sure that the iPod carried very low battery, and could not be charged by connecting it with any computer (both Mac and PC).
    I decided to let it have a charge with an AC charger for a bit longer, after 10 minute I did the Reset again, this time a sign of folder with exclamation mark showed up after the Apple sign, and again could not get recognized by a computer.
    I changed my mind, and put the iPod into disk mode
    Putting iPod into disk mode
    http://docs.info.apple.com/article.html?artnum=93651
    Instead of connecting with a PC, I plug it with my Mac using a Firewire cable, it did not response, so I switched the cable to an USB, interestingly, the iPod got recognized and a window pop up indicating that the iPod needed to do a Restore. Therefore I clicked “Restore”.
    After that I left the iPod with the ac charger overnight, and it finally recovered

  • Battery not charging and MBP not waking up from sleep

    I've got both of these issues happening. Sounds like I just have to wait it out on the sleep issue until a point at which Apple will issue a fix. The battery not charging is becoming especially frustrating though. I've had the computer for about a month and it just started a few days ago. I've checked the battery to see if it qualifies for replacement and it has the correct model number but the s/n has a different last for digits. I've unplugged/removed battery/held down the power button and no change, the battery still does not charge. Seeing as the MBP will run with the power cable inserted and the battery removed, I'm assuming that the cable's ok, the light has rarely come on at all lately -- no green or amber. Any advice here? I'm getting pretty frustrated with this thing.

    I met the same issue, the difference is while i touch the track pad or move mouse or hit keyboard, the screen responds rapidly and then back to black. tap the keyboard, it beeps... I can do nothing except "command+control+power" to restart or long press power to power off it.
    I found it only happens after I installed 10.8.2, it works well before 10.8.2 update.
    any help please?

  • Battery not charging, LED light on power cord not on

    Hi. My battery was not charging. So I bought a new battery. Even when the battery said 0%, the power cord kept the computer running. The new battery says 59% right out of the box, but it still says that the computer is not charging it. The power cord light is off, and has been since the problem began. I have tried plugging into multiple outlets, but the battery will not charge. The computer still stays on. What should I do now??

    http://support.apple.com/kb/TS1725
    http://support.apple.com/kb/TS1713
    http://support.apple.com/kb/TS1414

Maybe you are looking for

  • Aperture Dual monitors, what video card for AGP?

    I am running two 20 inch apple monitors with the stock ATY 128 mb card. I am going to be upgrading the card soon because the system is so slow. I know that I am limited because this system can only use AGP cards. What is the best AGP card available?

  • EM12c: Change Lifecycle Status of multiple targets

    Hi, we forgot to set a Lifecycle Status for some targets during the promoting process. I created some incident rules which distinguish themselves by the Lifecycle Status. So now i have to browse to every target home, open the menu and select "Target

  • Open browser in full

    Hi guru's In the CAT2 transaction I have used a user exit to open a browser screen when a user presses on a specific button. I'm using function module "CALL BROWSER" to open up When using a normal GUI the function module opens up a browser and displa

  • Missing Sync or missing out

    Hi Guys and Girls, I have just been given a HTC smartphone for work, sadly it's a windows 6.1 and syncs with my PC. Ideally I would like to sync my mac to it too. (me.com account works on it) I would therefore would like have work stuff in the window

  • "Given final block not properly padded" when using wrong secretKey

    Hello guys, I browsed the questions in this forum regarding my problem, but somehow couldn't find a solution to this. I generated two SecretKey key1 and key2. Now I'm using the Cipher class to encrypt a message to key1. If I try to decrypt it with ke