Why Confirmation not updated in ERP

Hi All;
We are using SRM 7.0 classic scenario & ECC6.
The user created confirmation and the manager approved it. but while transferring to backend, somebody was editing the PO. As a result, the system did not update the GR in ERP.
When i checked in in BBP_PD i found stats: currently being transferred"
How can I trigger again the confirmation to be transferred to backend.?
Thanks

Dear;
I have already checked in WE05 but I dod not find that IDoc other IDocs are successfull.
Now I am trying to cancel or re-confirm the confirmation but the system gives error message
System status FREE is active
System Status TRANS is active
what should I do to re-transmit it.

Similar Messages

Why does not update my applications to cc?

Why does not update my applications to cc? I have all the programs in cs6, adobe aplication manager and tells me this all updated, , but does not update to cc

CC applications will be available from June.
Please refer : http://www.adobe.com/products/creativecloud/faq.html

Transfer Order Confirmation not updated in Header level (Table: LTAK)

Hi,
We are facing a problem, transfer order header is not updated with confirmation, but TO items are confirmed and resulting these transfer order to display in RF monitor (LRF1 and LRF2 transactions).
And the other issue is, we are seeing some transfer orders created without item data (in LTAP table) and unable to confirm these TOs since Item data is not available, hence TO header is not updated with confirmation and resulting these TOs to display in LRF1 and LRF2 report.
I have cleared some transfer orders by updating the confirmation field in LTAK table through debugging. But we see the issue is ongoing and would like to have permanent solution.
It will be a great help if anyone have solution to these issues.
Thanks & Regards,
Nagarjun

Hi Nagarjun,
do you have any Z code in-between ? Did you check OSS notes ? Did you apply all patches to your system ?
What you are describing is something usual when Z programs were developed, you should provide more details for analysis.
Many thanks,
Enrico

Question for delta loading, why can not update existing record in cube

Hi, Gurus,
I load data from a flat file into one infocube with delta loading option, and in the related datasource, i chose 'additive delta' option.
However after delta initial and delta update, when I checked cube content, I found that there are 2 records with the same characteristic value (just like duplicated key), and my expectation is to sum key figure with the same characteristic. Who can help me on that?
BTW: when I check delta queue, why there is not any queue?

Hi,
In uploading of flat file , If you are able to capture the changes to the previously loaded records, Then you can follow the additve delta. So it decreases the time of uploading .Only changed or new records will be uploaded every time.
If you are not able capture the changes in flat file ,Every time you have to do full upload ,Before this delete the contents of Infocube. (Assuming there is no ODS B/W Infocube and Flat file).
With rgds,
Anil Kumar Sharma. P

Reciept from PO - Why stock not updating

Hi experts,
I am making GR in a Plant (ISBW) but didnt mention the storage location so when i open the stock list it didnt show goods which i recieved. My question is where is my material or did any step i am missing between a goods reciept from PO and storeing it in the storage location.
My second question is that when i create a Goods reciept of an item 70 which is finished product it says Material 70 does not exist for ABC storage location. Message no. L9023. Where to fix this issue.
the third situation in relevent to the SD module that when we enter material 1 during SaleOrder creation is automatically change it to material 70. Y?
Thanks

Hi Usman,
For your first case, If u have the PO assigned to Cost centre, then upon GR then qty will be consumed upon recieving and will not go to the Storage location. So please check whether your PO is account assigned or not.
Reward if u find this useful.
regards
Anand.c

I've recently updated IOS 7, but it asks me that updates is available, why its not updated in the first time, and also it aked me to be connected to itunes

I’ve updated the IOS7 from the iPhone, and after 3 hours, it asks to connect it to iTunes. after i connect it to iTunes it asks me that require update, then i agreed to update it runs for another 3 hours, and then a message shoed as "this iPhone needs to be restored, then i restore it. i lost all application and data. after two days i got a message that update is available of IOS7, which means my updates were useless. please advise on the way of updates, and do i will lose my data, and how i can recover?

Thanks, Lawrence. That's answered the 1st part of my question. Just wish I could get 2 the stage where I get all the icons on my screen!

Open value is not updating in credit workbench

Hi
we are using crm 7 ehp2 system currently facing issue in our credit scenario which is integrated with ERP credit configuration.
Open value is not updating in Credit Analyst Workbench(CRM_CAWB) and the same is not updating in erp t-code FD32   field sales value.
I have tried to run the initial load CMDOC_NOTIFY to update opened order value but its showing below error.
The following Errors/Warnings occured. Do you want to continue?
    Message no. SMOF164
The data replication requires the processing of single BDoc instances
   Message no. SMOF197
Pl advise how we can resolve this issue.
thanks Warm Regards
Manoj

Hi
we have resolved this issue. please follow below solution hope it will help you
SPRO - Customer Relationship Management - Basic Functions - Credit Management - General Settings - Maintain Credit Group
Mark flag in the credit update field for the relevant credit group.
Best Regards
Manoj

Excise Invoice is not updating though posted

Hi Everybody,
I have posted GR with partI and then i have posted EI against the GR Document after posting it should show status as POSTED but in my case its showing as INPROCESS still( I have not closed period for December 2008). Can anybody tell why its not updating.
Regards
Govindaraj.d
Edited by: RAJ on Jan 4, 2009 12:32 PM

Hi,
Thanks for your reply.
I have checked both tables entry are there but status is inprocess not as posted ie 'P'.
Regards
govind

NULLABLE column is not updated after the NOT NULL constraint definition...

Hi,
SQL> select column_name,nullable from all_tab_columns where table_name='EMP';
COLUMN_NAME NULLABLE
EMPNO N
ENAME Y
JOB Y
MGR Y
HIREDATE Y
SAL Y
COMM Y
DEPTNO Y
CODE_POLEIS_DIAM Y
9 rows selected
SQL> ALTER TABLE EMP add constraint emp_job_nn check(job is not null);
Table altered
SQL> select constraint_name from all_cons_columns
2 where table_name='EMP';
CONSTRAINT_NAME
FK_DEPTNO
PK_EMP
EMP_JOB_NN
SQL> select column_name,nullable from all_tab_columns where table_name='EMP';
COLUMN_NAME NULLABLE
EMPNO N
ENAME Y
JOB Y <---------'NULL'
MGR Y
HIREDATE Y
SAL Y
COMM Y
DEPTNO Y
CODE_POLEIS_DIAM Y
9 rows selected
Why is not updated....????
In Oracle ebook:
Oracle® Database Reference
10g Release 2 (10.2)
Part Number B14237-02
the comments about the NULLBLE column are as follows:
"Specifies whether a column allows NULLs. Value is N if there is a NOT NULL constraint on the column or if the column is part of a PRIMARY KEY. The constraint should be in an ENABLE VALIDATE state."
BUT BY DEFAULT ALL CONSTRAINTS ARE IN VALIDATE STATE
(Ref: Oracle® Database SQL Reference
10g Release 2 (10.2)
Part Number B14200-02 )Note : I use OraDB 10g v.2
Thanks a lot
Sim

Hi,
Tom Kytes answer it before:
SQL> create table t ( id int );
Table created.
SQL> desc t
Name Null? Type
ID NUMBER(38)
SQL> alter table t add constraint t_nn check (id is not null);
Table altered.
SQL> insert into t (id) values (null);
insert into t (id) values (null)
ERROR at line 1:
ORA-02290: check constraint (TANDREWS.T_NN) violated
SQL> desc t
Name Null? Type
ID NUMBER(38)
Followup July 16, 2003 - 10am US/Eastern:
that is not a NOT NULL constraint, that is a check constraint
ops$tkyte@ORA920LAP> create table t ( x int );
Table created.
ops$tkyte@ORA920LAP> alter table t modify x not null;
Table altered.
ops$tkyte@ORA920LAP> set linesize 50
ops$tkyte@ORA920LAP> desc t
Name Null? Type
X NOT NULL NUMBER(38)To see the full thread in asktom, please refer to:
- http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:1338402651192
Cheers,
Francisco Munoz Alvarez
http://www.oraclenz.com

PO confirmation not sent to ECC

Hi SNC Gurus
I have typical problem in PO collaboration, for PO confirmation. The PO is confirmed and published in SNC and showing status published, but the confirmation not updated on ECC side.
In application log (Transaction SLG1 - getting error as- PO XXX Item XXX: "ShippingPeriodEndDateTime should come before ShippingPeriodStartDateTime"
One more thing I checked is when PO delivry date is as per "Planned delivery date" in the material master then PO confirmation is working fine.
But when PO delivery date is not as per planned delivery time . ie suppose planned delivery time is 15 days in matl master but i enter delivery date in PO as equal to future 10 days then PO confirmation is not flowing from SNC to ECC..
Also please let me know how mode of transport duration in transportation lane affects PO shipping date on SNC side?
Will appriciate you early reply.
Thanks
VSK

Hi Nikhil
Thanks for the reply, but in POC3 we have only below validation profiles maintained
POC3     PO_COMPONENT_PRODUCT_INVALID     A Active
POC3     PO_COMPONENT_PRODUCT_MISSING     A Active
POC3     PO_COMPONENT_QUANTITY_MISSING     A Active
POC3     PO_COMPONENT_UOM_INVALID     A Active
POC3     PO_COMPONENT_UOM_MISSING     A Active
The profile you mentioned is not maintained.
Thanks
VSK

Timescape facebook extension not updating on SOny Tipo Dual

Dear Sony Support Team,
The timescape facebook extension is not updating from fb servers. Always shows message " Could not update to facebook servers. Tap here to retry."
Also, may be its a system application, thats why could not update it from google play market. Pls. help?? Your Prompt reply will be highly appreciated.

DO you get the same result using Wi-Fi and/or 3G networks?
- Community Manager Sony Xperia Support Forum
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

SCEP 2012 definitions not updating on few clients

Hi!
The SCEP 2012 definitions are not updating on few clients. It works for all other machines.
In MPLog i can only see that Signature update on date but not a line saying Signature updated via ...
Its not telling me where it got the updates in past and why its not updating now..
The definitions are pushed via SCCM, WSUS and MS not unc shares.
Which log file i should look for to get some answers why its not updating.
Thanks

Hi,
You can check C:\Windows\WindowsUpdate.log file to find the related error information.
In addition, did you configure an automatic deployment rule to deliver definition updates? If yes, I recommend you to make sure that all the clients are in the collection.
Best regards,
Susie

Why is my playlist not updating as i type in the search window anymore?

why is my playlist not updating to reflect what i type on the search window anymore? just searches in the same window as you type i want it to reflect and show location on my plylist instead as it did before.

I have code within the FLA, but I am also using .as files (with classes and such). The code does not update when I try to use it, or will not run. Currently I am getting 4 errors, all of which were related to syntax and have been fixed. I know this because I hit the check mark button at the top of code field and it confirmed that all syntax is okay. I believe the error may be due to a lack of understanding on my part regarding the source path and document classes.
For example: I am using the code found here: http://www.learningactionscript3.com/download/45/ in the particle_system folder. My .as files and SWF are set up exactly the same as theirs, the example, but I can run theirs without error and mine with a perpetual 4 errors at runtime no matter how I fix it. I have made sure that the source path leads to the .as files being used ("Particle" and "ParticleDemo"), and confirmed that it should work by hitting the check mark next to the Document Class under Advanced ActionScript 3.0 Settings.
Edit: So in short, yes, I run the SWF and my code not update. If I close out of Flash and open it up again with the same SWF and .as files, then it works. However, this is an extremely inefficient thing to do. I am thinking that maybe downgrading down to CS5 may do the trick, but not sure if it's worth the time.

Contract Release Value is not updated with Confirmation or Invoice value

The release value for a contract in SRM EBP shows the value of purchase orders created using that contract. It does not take into account confirmation and/or invoice values.
For example I create a PO for 10 items at £100/each using Contract ABC. The total value of the PO is £1000 and the release value contract ABC would be £1000. If I then only confirm and invoice 5 items (£500) for the PO, the release value of contract ABC stays at £1000 even though I would expect it to update to £500
Therefore the release value of the contract could be incorrectly overstated if purchase orders are created against the contract but not actually invoiced/confirmed for their total value.
Please could you confirm the correct functionality and how I could find out the the true invoice value of purchases made using a contract?

Hi
Which SRM and R/3 versions are you using ?
Meanwhile, please go through the following SAP OSS Notes, which will help in this case ->
Note 622045 Net value in release overview of contract is incorrect
Note 493519 Release quantities are not updated
Note 1108322 BBP_CONTRACT_CHECK wrong calculation of values
Note 1102886 Contracts: Lesser Field length for Target Value
Note 1082548 Check of Released quantity and released value in contract
Note 656181 Release synchronization of releases on services
Note 874920 Currency not allowed to be changed for a 'Released' Contract
Note 703771 Resetting release values during purchase order item deletion
Note 643823 BLAREL: Incorrect values in service segment
Note 519879 BBP_CTR_MAIN: No message when values in Contract are reset
Note 520734 Target value not converted if currency is changed
Note 528897 Documents not displayed in contract release order overview
Note 430373 BBP_CON_MNT: No releases available
Note 491993 Entry of contracts with target values
Note 437491 Purchase contract: Incorrect update of the call-off values
Note 406799 BBP_CON_MNT: Fields after contract release ready for input
Note 398168 Purchase contract: Target value is not changed
Do let me know.
Regards
- Atul

Why is my iMessage app not updating?

I have used (and LOVE) the iMessage app on my Macbook Pro. Has worked perfectly, even through iOS7 upgrades, and the Mavericks update, as well.
However over the past few days, it will not update correctly. I can send messages from it, but it does not show the incoming messages most of the time. They come through just fine to my phone and iPad, but not on my Mac... any thoughts as to why this is occurring?

Turns out that Feedburner was overruling the code in my XML with their "Smartcast" settings, which I have now disabled. Weird!

Why Confirmation not updated in ERP

Similar Messages

Maybe you are looking for