Why Core Center doesn't support PM8PM MS-7222?
How can i do overclocking for the PM8PM MS-7222?
because the board doesn't support Core Center.
Clockgen is your only hope. If it still doesn't work, Clockgen might not support this board, OR, your board is just can't overclock, period.
Similar Messages
-
K8T Neo - Core Center does not support your motherboard!
I installed the latest version of Core Center utility on Windows XP x64. But if I attempt to run it "Core Center does not support your motherboard!" is displayed. The download website clearly states that Windows XP x64 is supported. The message does not mention Windows XP x64 but the problem appears to have something to do with it because there is no problem on Windows XP x86.
Any suggestion is appreciated.Quote from: Kaz Honjo on 02-September-07, 21:33:39
I tried the one from the link in your post but no dice, or "Core Center does not support . . . "
I tried NextSensor. It seemd to be a stand-alone software and did not require installation. The result was that it did not have any effect on the fan speed. The Status indicated that Temperature of Processor and CPUCoreA were 118 and 35 degree C respectively, and that Fan Speed of CPUFan and SFan were 1250rpm respectively. These appeared incorrect. I could not get any instructions how to set it up so maybe I was not using it correctly.
"I tried the one from the link in your post but no dice, or "Core Center does not support . . . "
Support list :
MS-6570E,MS-6580(v5.0),MS-6585(v5.0),MS-6590(v2.0),
MS-6702(v1.0,v2.0),MS-6702E,MS-6714(v5.0),MS-6728(v1.0,v2.0,v3.0),MS-6741,MS-6758(v1.0,v2.0),MS-6788(v1.0,v2.0),MS-6799,
MS-7003,MS-7008,MS-7021,MS-7025,MS-7028(v1.0,v2.0),MS-7030,MS-7031,MS-7032,MS-7033,MS-7037,MS-7043,MS-7047,MS-7052,MS-7053,MS-7058,MS-7066,MS-7088,
MS-7100,MS-7125(v1.0,v3.0,v3.A),MS-7133,MS-7135,MS-7143(v2X),MS-7151,MS-7157,MS-7158,MS-7160,MS-7166,MS-7175,MS-7176(v1.0,v2.0),MS-7185,MS-7194
MS-7203,MS-7220,MS-7226,MS-7235(v1.1),MS-7236(v1.0,v2.1,v2.2,v2.4),MS-7246,MS-7250(v1.0,v2.0),MS-7260,MS-7267(v2.1,v3.0,v3.1,v3.2),MS-7279(v1.0,v2.3),MS-7280
OS : Windows 98/Me/2000/XP32/XP64
Basically should work...
"I tried NextSensor. It seemd to be a stand-alone software and did not require installation. The result was that it did not have any effect on the fan speed. The Status indicated that Temperature of Processor and CPUCoreA were 118 and 35 degree C respectively, and that Fan Speed of CPUFan and SFan were 1250rpm respectively. These appeared incorrect. I could not get any instructions how to set it up so maybe I was not using it correctly."
go to "Control", "Automatic Profile" and select the right senzor to be used. -
Why PC Companion doesn't support SMS backup?
Hi!
Why PC Companion doesn't support SMS backup?
So clear to need it as a base features
May be it has a recommended third party software?Alternatives on How to backup Xperias
http://talk.sonymobile.com/thread/36355
"I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994) -
DualCoreCenter error - "Dual Core Center does not support!"
Hi, just bought the insanely expensive MSI 8800 GTX Ulta OC (£457), which seems to ship with insanely cheap utilities.
I installed the Dual Core Center (after installing the 'latest' nvidia driver 158.22).
During the install, it insisted on a net framework 2 repair/uninstall for some unknown reason (I have net framework 2 and 3 installed - ie all latest xp patches) with no prior problems.
Anyway, I let it do the repair and install itself.
Now when I run the DualCoreCentre, it comes up with error msg: "Dual Core Center does not support!"
Can someone shed light on what that means please.
Thanks...It means:
I suck, don't use me!
Stay away from MSI's utilities. If you want to overclock or control fan speeds or anything else.
Have a look through: here -
"Dual Core Center does not support" error msg on K9N Platinum
Hi,
I just formated my system and installed all the drivers as I usually do. Last thing I installed was the Dual Core center. I cant make it run as I get "Dual Core Center does not support!" error message. I have an Athlon64 X2 4200+ with the latest cpu driver from AMD web site. Any idea on how I could make Dual Core Center work?
Thank you.Oh ok.
Well on the CD there is a Core Center, but on the site if you go deep into the specific motherboard download section there is a Dual Core Center. I guess it is for dual CPUs.
I've download the AMD X2 Driver. I just wanted to use the Cool'N'Quiet option, since I was told that I needed the "Core Center" for that. -
"Core Center does not support your motherboard" MSI P965 Neo Mobo
Hi all,
after upgrading to bios version 1.8 I can not seem to be able to use the Core Center application. Every time I try to start up the application I get an error saying that "Core Center does not support your motherboard". I tried to uninstall and reinstall the program, update to the latest version but with no success. I also tried to use the Dual Core Center but the result was the same.
Since I am using this program does anybody knows any fix for this problem please. I am sure that this is due to the bios update but I do not know what to do.
Thanks and Best Regards
Phanos
PS
My System specs are
Intel core 2 duo 2.13GHz No Overclocking
Twinmos DDR667 3GB (2 x 512, 2 x 1GB)
P965 Neo Motherboard bios version 1.8
Gigabyte 7600GS Graphic card
Enermax 530 Watt
Western Digital 16Mb cache 250 GB hard drive @ SATA-2, no RAID
Maxtor 16Mb cache 320 GB hard drive @ SATA-2, no RAID
Seagate 16Mb cache 200 GB hard drive @ IDE, no RAID
BIOS - optimal settings enable USB, 1394 and ACPI.
WinXP + SP2 + all latest Windows UpdatesHi Maesus,
the version of the Core Center is 2.0.2.3. In the about box it does not say beta. I still can not see the new version using the MSI Live Update 3. If someone needs this version please let me know at email removed to prevent spam or contact Msi directly at http://support.msi.com.tw/index.php
Best Regards
Phanos
I removed your email address to prevent you from getting spammed.
Those wishing to email Phanos, click the email icon to the left below his name.
Frankenputer -
Dual Core Center doesn't work at all.
My mobo is P35Neo2-FR. Cpu is C2D E4600. I didn't overclocked it. WinXP professional 32BIT is installed.
.Net 2.0 is also installed.
From some time, I cannot launch Dual Core Center program. When I double-click the Dual Core Center icon,
There is nothing to be launched. I could not understand why the program suddenly didn't work.
Please let me know the solution to successfully launch Dure Core Center program.yeah! my only experience with DCC is,... after it runs, it straight away turn on the siren, annoy the whole PC, and after 10 seconds, it shuts down my PC! That's the big annoyance already. The next time I reboot, I quickly terminate it from runnign longer, and straight away remove it from my PC. don't even bother to figure out where the alarm settings is.
-
Core center doesn't afect bios
when I change the FSB,vcore,memory voltage or AGP voltage in the core center it doesn't change in the bios, is there anything I can do to fix it?
No, the two are seperate things, bios is hardware overclocking but corecenter is software overclocking, use bios for best results when you overclock.
Babyface uk -
Why my iPad doesn't support adobe format so can't download adobe documents
my iPad doesn't support adobe format so can't download adobe documents
What adobe format?
PDFs are natively supported.
Adobe has several apps in the App Store. -
Why Tree DnD doesn't support COPY or INSERT?
The default mx:Tree drag-and-drop only supports MOVE. For
instance, one can drag an item from Tree A and _move_ to Tree B but
can't _add_ that item to Tree B unless you extend mx.controls.Tree,
override dragDropHandler() and dragCompleteHandler() and, if lucky,
write the logic right to calculate the insertion point and insert
into the right spot in the tree data structure, etc. etc.
Why app developers have to do this just to add items from a
tree to another?I feel your pain.
I wrote more then 50kb code in additional to existing mx:Tree
code to support COPY, INSERT, DELETE operation on Tree and I wrote
my own event handlers for dragDrop, dragOver and dragComplete
events.
I just do not see the other way to accomplish this task.
As one of the author of Flash 8 based dndTree component
http://drumbeatinsight.com/dndtree
I can tell you that I am also not satisfied with the way how
insertion point is calculated during drag'n'drop operation at
mx:Tree.
I would rather prefer to display graphically a proposed
insertion point (dndTree component uses a line symbol - see
screenshot at
http://drumbeatinsight.com/dndtree),
but I do not know currently how to use the similar approach with
mx:Tree component. -
Why attribute ID doesn't support EL?
I have problem to get component source from ValueChangeEvent because I cannot set ID to each component inside table rows (i.e: SelectBooleanCheckbox). checkbox attribute ID aren't unique in table row because ID is not support EL or variable. So HOW DO I GET THE COMPONENT WHICH RAISE EVENT?
Hi,
the action event points you to the component that raised the event. If you get an event and e.g. check for the current row data of the table then you can work with it. Rows in a table don't have their own component instance, which is why the clientId isn't different
Frank -
Why Asha 200 doesn't support WhatsApp?
Whatsapp is supported on x2 01 and x2 00 but asha 200 can not support whatsapp why?
Moderator's Note: We have moved your post and changed the title into a subject-related title. This is to keep the forum organized and let other forum users easily see and respond to this post.Asha 200 is not officially supported WhatsApp. Actually most of the older Dual-SIM phone models were not supported. So while it might be possible to install WhatsApp on Asha 200 using the direct download link from the thread Abi99 pointed out, If you end up doing that, don't be surprised to see more or less bugs.
http://www.microsoft.com/en/mobile/nokia-x-updates/
http://www.microsoft.com/en/mobile/nokia-x2-update/
http://www.microsoft.com/en/mobile/asha-software-update/
http://www.microsoft.com/en/mobile/support/software-update/wp8-software-update/
http://www.developer.nokia.com/Community/Wiki/Nokia_firmware_change_logs
https://twitter.com/LumiaSWUpdates -
I've bought my phone in London and there is no support here in Brasil???
So I need to buy a ticket ????but they gave me wrong advice because before I could use the apps at least and after nothing ,
the bad thing is that i did follow the tips because the first girl told me that it could be repaired in Sao Paulo
so I've trusted them and after all the wrong information they told me to send it to london . -
Why Flash player doesn't support on Apple iPhone Devices?
Should be all flash player support on iPhone/iPad coz apple device are favorite user!
or any knows what are flash can be playing on iPhone? thankshttp://www.apple.com/hotnews/thoughts-on-flash/
-
Why ios Safari doesn't support Arabic @font-face fonts?
Recently, we decided to use some arabic webfonts from fonts.com in our projects, but we have had trouble with ios safari arabic webfont rendering. It's really ridiculous and amazing!!!
I checked different fonts with different format(ttf, svg) from different online font hosting services. (fonts.com, fontdeck.com, ...) but the Arabic characters didn't display with my fonts and it just displayed by default (I think it's Arial) font by ios safari!
I am sure that the fonts download but the characters doidn't show with my font typeface! because, interesting, I tested with other fonts (the glyphs English numbers in these fonts replace with arabic numbers) so when safari rendering the fonts it showed the numbers with correct fonts (webfonts) but it didn't show the arabic character!! :-)
I checked all those fonts in Mac and PC with Safari, Chrome, FF, IE, everyrhing is ok in both platform but in ios it has problem?!!
I want to know that, Is this problem/bug from ios Safari that resolve in ios6 or this is apple policy that don't show any other fonts?!!! (Think Different!!?? )
How can I tell the apple this problem, because with this bug or policy we cannot use the great fonts that designer designed with whole efforts. Is there any issue tracker or bug report from Apple that we can tell them this?https://bugreport.apple.com/
http://www.apple.com/feedback/ipad.html
Maybe you are looking for
-
Java to Webservices ??
Hi friends, Can someone tell me a high level idea on how to interact with the Webservices like I have one Standalone Java application which need to interact with some Webservices to validate something. Is it possible to talk from Java to Web Services
-
Enhance FITV_FPM :Change pop up window text
HI All, I need to add text in a popup based on expense type entered by the user while creating expense. WDC:FITV_FPM is already enhanced to show the existing text in a popup. I need to add some more text on this pop up based on expense type. Already
-
Connecting to an oracle db from a servlet. need help.
Hello! I'm a noob in webprogramming but I am studing it for a month. So I have a trouble with jdbc. I write a web application in Sun Studio Creator 2 IDE. There is an Oracle 11g database on my computer. The application has ajax jsp, which sends async
-
Hello, When I submit jobs under OMS, for example, the full export of a database, it fails with the vni-2015 error. I describe underneath, the steps made. OS:Windows XP Pro Version 2002 SP1 Database : Oracle 9i 9.2.0.1.0 I opened a windows session loc
-
MBP unibody - Bended body by superdrive
Hi all, The body of my MBP (2008) unibody is bending slightly exactly where the superdrive is, closing the media slit in the body. This means that the slit where you insert the dvd/cd is no longer aligned to the actual superdrive slot. I have issues