Why CPU Usage showing spiky line when Demand showing a smooth line?

I always thought that CPU Demand should be identical with CPU Usage, because both are average. So the chart below comes as a surprise to me. This is from vCenter 5.5 Update 1. There is no contention, as can be seen from the Entitlement counter.
The values are actually the same. The Demand line is somehow an average of the Usage. When both values are rolled up to 5 minutes, they become identical. The data at vCenter Operations shows that.
Question: why is the line pattern so different? The Usage showing a spiky line while Demand shows a smooth line. The Demand line makes sense as it is an average of 20 seconds. The Usage is a bit strange as it fluctuates drastically.
Thank you
e1

I had a discussion with a friend on this. The 2 counters are both average, and are tracking the same thing. One of them has to be the "wrong" one. We think the CPU Usage pattern is the misleading one, because each sample is 20 seconds. That is 20,000,000,000 nano seconds. There are also 2 low point for 1 high point. It is strange for a CPU to be low for 40 billions nano seconds, then spike for 20 billion nano seconds.
The chart is from vCenter 5.5 Update 1. The host is ESXi 5.5
What do you think?

Similar Messages

100% CPU usage in DW CS5 when opening page...

Hi there, I'm new here!
I'm working on my site in DW and have already completed another site without having this problem. I open a *paticular* file, and my CPU usage goes to 100% when I use the split view. In code, DW runs fine, but as soon as it tries to render a preview (not in live mode) in the second pane, it starts going quickly between (notresponding) and very slow response. So it's slow or nothing!
This page is using some z-index in the CSS and flash, so I don't know if maybe it's just my processor speed isn't up to it?
I have tried it on my downstairs desktop (quad core, can't remember exact specs but could look it up, but it's faster than my ltop, obviously..), and it works slightly better. Does DW use scratch disks? Is there a way to turn off some CSS properties in the display to improve performance? I can work just in code for a lot of my work, but for placement it is much more intuitive to use a split view for me. HELP! (Please and thank you!)

I am having a similar problem with some files when working in split view. I have been experiencing slow performance and Dreamweaver goes into "Not Responding" state for 30-60 sec when I click somewhere (doesn't matter if I click in design or code portion) and also when I go to Undo something. This has happened in other files, too. Eventually it starts responding again but it is moving slowly. My task manager shows CPU and memory usage spiking up and down as well (specifically memory of Dreamweaver process).
Sometimes it does it when Dreamweaver is open and I am doing something in another smaller window in front of it too (such as writing an email)…
I had the task manager open and Dreamweaver (and nothing else) the other day, and Dreamweaver kept flashing back and forth to "Not Responding"… so I closed it and it made task manager freeze up so that it wouldn’t close and the task manager memory and CPU usage were spiking.
Specs on my machine:
HP xw6600 workstation
Windows Vista SP2 (32-bit)
Intel Xeon Processor (Quad-core, 2.33 GHz)
4 gigs of RAM
I am Running Dreamweaver CS5 with all updates installed
I have already tried the following:
Re-creating preferences file
Re-creating registry files
Re-creating personal config files
Uninstalling and Re-installing Dreamweaver
Running a Windows Live Care scan on my computer to check for viruses, registry file errors, etc.
The only thought I have is that I when I installed CS5, i didnt uninstall CS4 first, thinking that I could just upgrade...
When I went into add/remove programs Creative Suite CS4 still showed up in there, but the programs were not on my computer anymore. I removed it anyway, but there were still some random folders left on my computer from it that I found when trying to solve this issue, such as preferences files from CS4 and personal config folders for Dreamweaver CS4, Photoshop CS4, Fireworks CS4 and Contribute CS4, which I deleted, but it has not solved the problem.
I can't think of anything else to try short of wiping my hard drive and doing a clean install of OS and Creative Suite, which I really dont want to go through.
Please help!

High CPU Usage On client application when upgrade remote SQL database

Hi,
Is anyone here encountered very high CPU usage after upgraded the database from SQL 2005 to SQL 2012? Following describes my issue.
I have my client application running on Windows 7 that access to central database (SQL 2005) on Windows server 2003 using ODBC connection, this client application basically query data and perform data insert and update. There are a number of this similar
clients connected to the database.
Due to slowness of the database server, company decided to upgrade the database server to SQL 2012 and also new hardware runing Windows Server 2012. There is no change on the client application and client hardware and the client application still using the
same ODBC connection to query, insert or update the new database server.
The problem I am now experiencing now is that my client PC where my client application running the CPU usage is very high almost hitting 100% when accessing to the central database. I am also noticed this program lsass.exe that utilized almost 40-50% of
the CPU time when client application accessing the central database.
Is anyone here know, why client PC CPU usage 100% when access to upgraded SQL 2012 database? What is lsass.exe program doing, it only appear when accessing to database server. How to reduce the CPU usage on client?
Thanks.
Chee Wee.

Hello,
After upgrading, please rebuild indexes and update statistics on the databases.
http://www.mssqltips.com/sqlservertip/1367/sql-server-script-to-rebuild-all-indexes-for-all-tables-and-all-databases/
http://www.mssqltips.com/sqlservertip/1606/execute-update-statistics-for-all-sql-server-databases/
Configure maxdop on the instance.
http://blogs.msdn.com/b/sqlsakthi/archive/2012/05/24/wow-we-have-maxdop-calculator-for-sql-server-it-makes-my-job-easier.aspx
If the above does not solve the issue, let us know.
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

My CPU usage jumps to 100 % when I use iTunes 10.6.1 -using Windows XP Service Pack 3

When I open itunes 10.6.1 my CPU usage jumps to 100%. it started doing this about 6 months ago when I updated itunes.

This helped me. You should try it. Now I can run itunes or Safari and my CPU usage is around 22%.
Close your iTunes,
Go to command Prompt -
(Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
(Win XP SP2 & above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
In the "Command Prompt" screen, type in
netsh winsock reset
Hit "ENTER" key
Restart your computer.
If you do get a prompt after restart windows to remap LSP, just click NO.
Now launch your iTunes and see if it is working now.
If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/TS4123?viewlocale=en_US

"View Journal Entry" line when "Export"shows 'Account Description' as TEST?

When use "Line Drill Down" of Journal Entry line from GL & click on "View Journal Entry" button. The Journal line that appear when "Export" shows 'Account Description' as TEST in the excel or csv file. This issue is happening in Production. Is there any setup thats bringing this 'Account Description' as TEST or Oracle is defaulting this 'TEST'? What is the reason for this?
It will be of great help if somebody explain this.
regards,
Sairam

Try the patch 9695800.
By
Vamsi

High CPU Usage from "System Interrupts" when enabling IGP

Hi
Mainboard is Z87-G43 with bios version 1.5 - OS is Win 8.1 x64
I have screen#1 connected to a geforce 570 graphics card.
Then i enabled the IGP (4770k) in Bios, installed the newest VGA Drivers Version 10.18.10.3277 from MSI homepage and connected screen#2 to IGP (reason is that geforce clocks go to 3D Mode when 2 monitors are connected -> higher power consumption)
Now I have ~10% permanent CPU Usage (80% of CPU1) in Task Manager process "System Interrupts"
Any Ideas?
Thanks for help

Problem is gone after reinstalling Windows 8.1 again. (Both times clean install)
Things that have been changed before reinstalling:
- I updated Bios again with Version 1.5 - this time with BIOS + ME update with M-Flash. I couldnt do this before because with Bios 1.3 it instantly freezed when selecting the bios file for 1.5 update. So i used the forums Flash Tool to get to 1.5 and the updated M-Flash. ME-Version is higher now.
Things that have been changed after reinstalling:
- I did all windows updates before installing drivers
- Nvidia drivers is now 331.65 from Windows Update instead of 331.58 from Nvidias HP
- Intel VGA drivers is now 10.18.10.3316 from Windows Update instead of 10.18.10.3277 from MSI HP
- Intel ME drivers is now 9.5.15.1730 (2013-10-29) from MSI Homepage (was updated after my download)
Everything else was identical (UEFI Settins, programs...)
Greetings

CPU Usage goes upto 50% when redrawing image Adornment, any work around ?

Hi All,
I am struck in a very strange situation. I am trying to draw an image as adornment on a text box.
In adornment draw method as soon as i call gPort->image() my image is drawn. But when I move the textbox in Indesign document, adornment redraw doesn't take place at all or is very slow and partial.
To remove this I have called ILayoutUIUtils::InvalidateViews() on the document. Which Solves the issue of Redraw But a New Issue came up with Indesign CPU Usage goes upto 50% just to draw Adornment. Which is not acceptable. The reason for high CPU usgae may be recursive calls to Draw method, caused by InvalidateViews().
Below is the relevant code snippet:
void MyAdornment::Draw(IShape* shape, AdornmentDrawOrder drawOrder, GraphicsData* graphicsData, int32 flags)
         // .... code to create a AGMImageRecord
        gPort->image(pCurAGMImage, transformMatrix, 0);
        InterfacePtr<IPMPersist> persist(itemGeometry, UseDefaultIID());
        ASSERT__BREAK((persist == nil), "WExtAdornment::Draw: IPMPersist interface pointer nil");
        IDataBase*            theDB            = persist->GetDataBase();
        InterfacePtr<IDocument> theDoc(theDB, theDB->GetRootUID(), UseDefaultIID());
        ASSERT__BREAK((theDoc == nil), "WExtAdornment::Draw: IDocument pointer nil");
        Utils<ILayoutUIUtils>()->InvalidateViews(theDoc);
Is there any other way to redraw my adornment image quickly and neatly, while not causing these unnecessary recursive calls ?
Any suggestion will be appreceiated.
Thanks,
D

Hi All, Please Suggest something. I am struck at it and lost all hope to ever solve it.

Why does consecutive figure numbering break when using anchored and in-lin objects

I have an ID CC2014 document that contains graphics with figure numbers associated (using a defined paragraph style - numbered list - continue from previous) and when I place these into the flow of the document with a wrap associated to them they maintain the consecutive numbering that was set up in the figure style sheet. However when a table or graphic is placed in-line with the text (anchored graphic box or inserted table) the consecutive figure numbering doesn't continue, it restarts as #1. The next anchored or inserted item then sees this figure number and follows as if the list was restarted. What is up?
I have found that if all items are used as wrap graphics or separate text/table boxes the figure numbering functions as it should.
Is this a glitch?

I had that happen a month or so ago. What I discovered was there was another numbered list setting in the anchored frames. That's what was restarting the numbers. No glitch. User error.
Sent from my iPhone
So pardon the brevi

What is average cpu usage for itunes? when idle?

I've noticed lately that itunes is using 6% cpu when I'm doing absolutely nothing, even with the window x'ed out. It seems to stay at 6% pretty steadily too doesn't fluctuate when idle; but when I open up the window and attempt to play music, the cpu goes crazy. The 6% when idle isn't a terrible issue, I would just like to know if this is normal... I don't have any plug-ins either and I'm running osx 10.4.11.

That can't be normal because I have a G4 1.5Ghz and, when idle, it runs .3% and at full steam it runs at max 10%. As far as a solution I think someone can give you more insight.

High CPU usage with emagent.exe when system is very busy

We have run into an issue with the emagent consuming a lot of CPU when our databases and overall systems get taxed. It does not appear that the emagent is the cause of the initial problem. But once resources start to get taxed and there is an overall slowdown in performance, the emagent starts consuming more and more CPU. Messages appear in the log indicating that it is waiting on certain actions, such as:
:activity_pending is due to run again but is still running from last schedule
It is almost as if the longer it takes to get a response the harder it tries and the more resources it consumes. In other words, it is making a bad situation worse. It would be nice if there were some configuration parameters that could limit the retry rate.
Has anyone run into this issue? I have opened an SR with Oracle support a few months ago but haven't got anywhere.
The OS is AIX 5.3 and the grid version is 10gR2.

Thanks for the info. I will pass on the SR # to see if it helps.
Here is the tail end of an emagent.trc:
2006-08-04 09:28:45 Thread-804 WARN scheduler: oracle_database:HPR:sessions_in_wait_9i is due to run again but is still running from last schedule
2006-08-04 09:28:53 Thread-804 WARN scheduler: oracle_database:HAT:sessions_in_wait_9i is due to run again but is still running from last schedule
2006-08-04 09:28:56 Thread-804 WARN scheduler: oracle_database:HAT:wait_bottlenecks_9i is due to run again but is still running from last schedule
2006-08-04 09:29:05 Thread-804 WARN scheduler: oracle_database:H75:wait_bottlenecks_9i is due to run again but is still running from last schedule
2006-08-04 09:29:27 Thread-804 WARN scheduler: oracle_database:H75:sessions_in_wait_9i is due to run again but is still running from last schedule
2006-08-04 09:29:31 Thread-804 WARN scheduler: oracle_database:H75:haconfig4_collection+sga_pool_wastage_9i+Database_Resource_Usage_9i+UserAudit is due to run again but is still running from last schedule
2006-08-04 09:29:32 Thread-804 WARN scheduler: oracle_database:HPR:wait_bottlenecks_9i is due to run again but is still running from last schedule
2006-08-04 09:29:45 Thread-804 WARN scheduler: oracle_database:HPR:sessions_in_wait_9i is due to run again but is still running from last schedule
2006-08-04 09:29:53 Thread-804 WARN scheduler: oracle_database:HAT:sessions_in_wait_9i is due to run again but is still running from last schedule
2006-08-04 09:29:56 Thread-804 WARN scheduler: oracle_database:HAT:wait_bottlenecks_9i is due to run again but is still running from last schedule
2006-08-04 09:29:58 Thread-804 WARN scheduler: oracle_database:H75:instance_efficiency_9i+UserBlock_9i+rac_global_cache_9i+haconfig2_collection+ha_rac_intrconn_traffic is due to run again but is still running from last schedule
2006-08-04 09:30:05 Thread-804 WARN scheduler: oracle_database:H75:wait_bottlenecks_9i is due to run again but is still running from last schedule
2006-08-04 09:30:27 Thread-804 WARN scheduler: oracle_database:H75:sessions_in_wait_9i is due to run again but is still running from last schedule
2006-08-04 09:30:32 Thread-804 WARN scheduler: oracle_database:HPR:wait_bottlenecks_9i is due to run again but is still running from last schedule
2006-08-04 09:30:45 Thread-804 WARN scheduler: oracle_database:HPR:sessions_in_wait_9i is due to run again but is still running from last schedule
2006-08-04 09:30:53 Thread-804 WARN scheduler: oracle_database:HAT:sessions_in_wait_9i is due to run again but is still running from last schedule
2006-08-04 09:30:56 Thread-804 WARN scheduler: oracle_database:HAT:wait_bottlenecks_9i is due to run again but is still running from last schedule
2006-08-04 09:31:05 Thread-804 WARN scheduler: oracle_database:H75:wait_bottlenecks_9i is due to run again but is still running from last schedule
2006-08-04 09:31:27 Thread-804 WARN scheduler: oracle_database:H75:sessions_in_wait_9i is due to run again but is still running from last schedule
2006-08-04 09:31:32 Thread-804 WARN scheduler: oracle_database:HPR:wait_bottlenecks_9i is due to run again but is still running from last schedule
2006-08-04 09:31:45 Thread-804 WARN scheduler: oracle_database:HPR:sessions_in_wait_9i is due to run again but is still running from last schedule
2006-08-04 09:31:53 Thread-804 WARN scheduler: oracle_database:HAT:sessions_in_wait_9i is due to run again but is still running from last schedule
2006-08-04 09:31:56 Thread-804 WARN scheduler: oracle_database:HAT:wait_bottlenecks_9i is due to run again but is still running from last schedule
2006-08-04 09:32:05 Thread-804 WARN scheduler: oracle_database:H75:wait_bottlenecks_9i is due to run again but is still running from last schedule
2006-08-04 09:32:27 Thread-804 WARN scheduler: oracle_database:H75:sessions_in_wait_9i is due to run again but is still running from last schedule
2006-08-04 09:32:32 Thread-804 WARN scheduler: oracle_database:HPR:wait_bottlenecks_9i is due to run again but is still running from last schedule
2006-08-04 09:32:36 Thread-1398 WARN vpxoci: OCI Error -- ErrorCode(972): ORA-00972: identifier is too long
SQL = "/* OracleOEM */
SELECT estimated_mttr "Estimated MTTR"
FROM v$insta"...
LOGIN = dbsnmp/<PW>@(DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=pshrp)(PORT=1521))(CONNECT_DATA=(SID=HQA)))
2006-08-04 09:32:36 Thread-1398 ERROR fetchlets.sql: ORA-00972: identifier is too long
2006-08-04 09:32:36 Thread-1398 ERROR engine: [oracle_database,HQA,ha_mttr] : nmeegd_GetMetricData failed : ORA-00972: identifier is too long
2006-08-04 09:32:36 Thread-1398 WARN collector: <nmecmc.c> Error exit. Error message: ORA-00972: identifier is too long
2006-08-04 09:32:45 Thread-804 WARN scheduler: oracle_database:HPR:sessions_in_wait_9i is due to run again but is still running from last schedule
2006-08-04 09:32:54 Thread-804 WARN scheduler: oracle_database:HAT:sessions_in_wait_9i is due to run again but is still running from last schedule
2006-08-04 09:32:56 Thread-804 WARN scheduler: oracle_database:HAT:wait_bottlenecks_9i is due to run again but is still running from last schedule
2006-08-04 09:32:58 Thread-804 WARN scheduler: oracle_database:H75:activity_pending is due to run again but is still running from last schedule
2006-08-04 09:33:02 Thread-515 WARN http: -1,5: nmehl_httpListener: signaled to exit from emctl

Why is my MacBook Pro slowe when I open it off line to view photo images?

I had recently activated iCloud. I have it set not to copy my photos or data, but only settings and a few other categories. I opened it offline in Preview to quickly view photos on memory cards. I found it slow, with a drop down box periodically flashing open from the top of the screen. It appears to be attempting to copy or save my images. I presume this is to iCloud, though I have it specifically unchecked and do not want it saved to iCloud. I have Dropbox, which I quit, so it is not a factor. I never save my photo images there either. In the past, it was never problem to open and view images with Preview. Now it is extremely slow to open and load images for contact sheet view. All this is recent with the addition of Mavericks and iCloud. Also, I attempted to get out of this by quitting, but had to resort to a forced quit, as it continued to do what it was doing.
Is there a way to be sure iCloud is not copying things and slowing down my computer? Is this a glitch caused by Mavericks?
I have done scans with Sophos Antivirus and it does not appear I have any virus. I have lost all the speed of having a Mac. It is now slower than my old dual core Acer PC. I recently added a Caldigit Thunderbolt dock which has worked great to add USB 3.0 to my early 2011 MacBook Pro which had not 3.0 ability, but this
was bypassed, as my card reader is only 2.0. Any help would be appreciated. Thanks.
<Edited by Host>

I think I have found the source of my problem detailed above. Apparently, there have been problems with Preview running on OS Mavericks, dating back to October 2013, which Apple has yet to acknowledge or address. Many have had similar problems with photo images loading very slowly to the point of making Preview unuseable.
It may also explain problems I have had with flash drives and hard drives that ran on my Mac Book Pro under Lion no longer working since upgrading to Mavericks. I found other postings on these issues.
It is a shame that I have to resort to Google as the best source to identify problems with my Mac and possible solutions. In many cases, it directs me to the source on Apple Support, which is difficult to find when one attempts a search via Apple Support. This could use some improvement.
I am new to using community support sites and Apple does not seem to provide simple, clear directions on how to get started. Jumping in with both feet, not only did I get wet, but I apparently "splashed" someone, as I got a hostile response from another community member on the first issue ever posted. I never did get an answer to the problem, though. I hope some find these comments helpful.
Oh, and wake up, Apple. We all would hope you monitor and glean information from these postings and act promptly to remedy problems with OS Mavericks.
Message was edited by: MikeMacBP2011

Downloads doesn't show in Library when click "show all downloads"

On this newly installed laptop when I clicked on "Show All Downloads", the library pops-up but then it only shows All Bookmarks and nothing else whilst on two other desktop computers it will show History, Downloads, Tags then only All Bookmarks.
Not sure how to attached the screen captures but I've uninstalled and reinstalled FF 29.0.1 five time to no avail.
Thanks in advance
EQ

You can't attach a screenshot to the first post that starts a thread, but you can do that in subsequent replies.
Make sure that you do not run Firefox in permanent Private Browsing mode (Never remember history).
*https://support.mozilla.org/kb/Private+Browsing
*Tools > Options > Privacy > Firefox will: "Use custom settings for history"
*Deselect: [ ] "Always use private browsing mode"
Can you see any downloads on the about:downloads page?

How to assign Line Number for Lines when click on Add More Lines

Hello All,
Kindly help me to assign line number for the lines which are added through Add More Lines button on an Advance table. If user clicks on the button Add More Lines then there are 5 lines get inserted at a time but I am not able to handle the line number for them.
Similarly, if user delete any of the line then I need to re-order them.
Kindly help and share if there is any sample code.
Thanks,
Sandy

Hi,
Check if this link helps you :
Re: How to display serial numbers in the results table region
--Sushant

High CPU usage when laptop is idle!

Hi,
After upgrade CPU usage is 20-30 % when laptop is idle.This happens for the first time,i use arch for about 2 months.
WM: Openbox.Here is what "top" gives me:
[dejan@DejanArch ~]$ top
top - 01:52:33 up 20 min, 0 users, load average: 0.13, 0.14, 0.13
Tasks: 123 total, 2 running, 120 sleeping, 0 stopped, 1 zombie
Cpu(s): 7.6%us, 16.7%sy, 0.0%ni, 75.0%id, 0.5%wa, 0.0%hi, 0.2%si, 0.0%st
Mem: 1019104k total, 587564k used, 431540k free, 37668k buffers
Swap: 2048280k total, 0k used, 2048280k free, 350592k cached
PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
3531 root 20 0 71724 18m 8392 S 32 1.9 6:44.09 X
3827 dejan 20 0 79728 5040 3992 S 7 0.5 1:10.07 conky
3687 dejan 20 0 3432 1572 856 S 2 0.2 0:18.94 dbus-daemon
22165 dejan 20 0 88800 9820 7172 S 1 1.0 0:00.57 lxterminal
3704 dejan 20 0 90312 8456 6220 S 0 0.8 0:03.44 xfce4-power-man
3787 dejan 20 0 14124 2852 2364 S 0 0.3 0:02.81 obex-data-serve
22208 dejan 20 0 2556 984 756 R 0 0.1 0:00.06 top
1 root 20 0 1872 552 484 S 0 0.1 0:00.78 init
2 root 20 0 0 0 0 S 0 0.0 0:00.00 kthreadd
3 root 20 0 0 0 0 S 0 0.0 0:00.22 ksoftirqd/0
6 root RT 0 0 0 0 S 0 0.0 0:00.00 migration/0
7 root RT 0 0 0 0 S 0 0.0 0:00.00 watchdog/0
8 root RT 0 0 0 0 S 0 0.0 0:00.00 migration/1
10 root 20 0 0 0 0 S 0 0.0 0:00.16 ksoftirqd/1
12 root RT 0 0 0 0 S 0 0.0 0:00.00 watchdog/1
13 root 0 -20 0 0 0 S 0 0.0 0:00.00 cpuset
Thanks.
Last edited by grobar87 (2011-05-16 23:54:52)

@AliWam Thanks!Conky was the problem.When i kill conky CPU load drops.Strange :S But i want conky on my desktop,i hope there is solution for this.
@lagagon When i kill conky cpu load is normal (0 - 2 %),with conky 20-30% when laptop is idle.This is my "lspci":
[dejan@DejanArch ~]$ lspci
00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub (rev 0c)
00:02.0 VGA compatible controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (primary) (rev 0c)
00:02.1 Display controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (secondary) (rev 0c)
00:1a.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 (rev 02)
00:1a.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 (rev 02)
00:1a.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 (rev 02)
00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 02)
00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 (rev 02)
00:1c.1 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 (rev 02)
00:1c.5 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 6 (rev 02)
00:1d.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 (rev 02)
00:1d.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 (rev 02)
00:1d.2 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 (rev 02)
00:1d.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev f2)
00:1f.0 ISA bridge: Intel Corporation 82801HEM (ICH8M) LPC Interface Controller (rev 02)
00:1f.2 IDE interface: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) SATA IDE Controller (rev 02)
00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller (rev 02)
03:01.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev ba)
03:01.1 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 04)
03:01.2 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 21)
09:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 02)
0c:00.0 Network controller: Atheros Communications Inc. AR5001 Wireless Network Adapter (rev 01)
[dejan@DejanArch ~]$
So i think my video card is Intel and i use the lastest intel drivers.I install with this command "pacman -S xf86-video-intel".Please tell me if i do something wrong.
This is all i have in Xorg.0.log file:
[ 19.630]
X.Org X Server 1.10.1
Release Date: 2011-04-15
[ 19.630] X Protocol Version 11, Revision 0
[ 19.630] Build Operating System: Linux 2.6.38-ARCH i686
[ 19.630] Current Operating System: Linux DejanArch 2.6.38-ARCH #1 SMP PREEMPT Fri May 13 07:54:18 UTC 2011 i686
[ 19.630] Kernel command line: root=/dev/disk/by-uuid/9931bc08-6fa4-45f2-811c-1c7eb558b92d ro
[ 19.630] Build Date: 16 April 2011 12:05:35PM
[ 19.630]
[ 19.645] Current version of pixman: 0.20.2
[ 19.645] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 19.645] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 19.645] (==) Log file: "/var/log/Xorg.0.log", Time: Wed May 18 20:00:06 2011
[ 19.670] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 19.687] (==) No Layout section. Using the first Screen section.
[ 19.687] (==) No screen section available. Using defaults.
[ 19.687] (**) |-->Screen "Default Screen Section" (0)
[ 19.687] (**) | |-->Monitor "<default monitor>"
[ 19.688] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 19.688] (==) Automatically adding devices
[ 19.688] (==) Automatically enabling devices
[ 19.728] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 19.728] Entry deleted from font path.
[ 19.786] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 19.786] Entry deleted from font path.
[ 19.786] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 19.787] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 19.787] Entry deleted from font path.
[ 19.787] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 19.787] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/
[ 19.787] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 19.787] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 19.787] (II) Loader magic: 0x81f4ee0
[ 19.787] (II) Module ABI versions:
[ 19.787] X.Org ANSI C Emulation: 0.4
[ 19.787] X.Org Video Driver: 10.0
[ 19.787] X.Org XInput driver : 12.2
[ 19.787] X.Org Server Extension : 5.0
[ 19.788] (--) PCI:*(0:0:2:0) 8086:2a02:1028:029a rev 12, Mem @ 0xf6e00000/1048576, 0xe0000000/268435456, I/O @ 0x0000efe8/8
[ 19.788] (--) PCI: (0:0:2:1) 8086:2a03:1028:029a rev 12, Mem @ 0xf6f00000/1048576
[ 19.789] (II) Open ACPI successful (/var/run/acpid.socket)
[ 19.789] (II) LoadModule: "extmod"
[ 19.813] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 19.822] (II) Module extmod: vendor="X.Org Foundation"
[ 19.822] compiled for 1.10.1, module version = 1.0.0
[ 19.822] Module class: X.Org Server Extension
[ 19.822] ABI class: X.Org Server Extension, version 5.0
[ 19.822] (II) Loading extension MIT-SCREEN-SAVER
[ 19.822] (II) Loading extension XFree86-VidModeExtension
[ 19.822] (II) Loading extension XFree86-DGA
[ 19.822] (II) Loading extension DPMS
[ 19.822] (II) Loading extension XVideo
[ 19.822] (II) Loading extension XVideo-MotionCompensation
[ 19.822] (II) Loading extension X-Resource
[ 19.822] (II) LoadModule: "dbe"
[ 19.822] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 19.823] (II) Module dbe: vendor="X.Org Foundation"
[ 19.823] compiled for 1.10.1, module version = 1.0.0
[ 19.823] Module class: X.Org Server Extension
[ 19.823] ABI class: X.Org Server Extension, version 5.0
[ 19.823] (II) Loading extension DOUBLE-BUFFER
[ 19.823] (II) LoadModule: "glx"
[ 19.823] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 19.842] (II) Module glx: vendor="X.Org Foundation"
[ 19.842] compiled for 1.10.1, module version = 1.0.0
[ 19.842] ABI class: X.Org Server Extension, version 5.0
[ 19.843] (==) AIGLX enabled
[ 19.843] (II) Loading extension GLX
[ 19.843] (II) LoadModule: "record"
[ 19.844] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 19.853] (II) Module record: vendor="X.Org Foundation"
[ 19.853] compiled for 1.10.1, module version = 1.13.0
[ 19.853] Module class: X.Org Server Extension
[ 19.853] ABI class: X.Org Server Extension, version 5.0
[ 19.853] (II) Loading extension RECORD
[ 19.853] (II) LoadModule: "dri"
[ 19.853] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 19.876] (II) Module dri: vendor="X.Org Foundation"
[ 19.876] compiled for 1.10.1, module version = 1.0.0
[ 19.876] ABI class: X.Org Server Extension, version 5.0
[ 19.876] (II) Loading extension XFree86-DRI
[ 19.876] (II) LoadModule: "dri2"
[ 19.877] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 19.917] (II) Module dri2: vendor="X.Org Foundation"
[ 19.917] compiled for 1.10.1, module version = 1.2.0
[ 19.917] ABI class: X.Org Server Extension, version 5.0
[ 19.917] (II) Loading extension DRI2
[ 19.917] (==) Matched intel as autoconfigured driver 0
[ 19.917] (==) Matched vesa as autoconfigured driver 1
[ 19.917] (==) Matched fbdev as autoconfigured driver 2
[ 19.917] (==) Assigned the driver to the xf86ConfigLayout
[ 19.917] (II) LoadModule: "intel"
[ 19.917] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 19.940] (II) Module intel: vendor="X.Org Foundation"
[ 19.940] compiled for 1.10.0.902, module version = 2.15.0
[ 19.940] Module class: X.Org Video Driver
[ 19.940] ABI class: X.Org Video Driver, version 10.0
[ 19.940] (II) LoadModule: "vesa"
[ 19.941] (WW) Warning, couldn't open module vesa
[ 19.941] (II) UnloadModule: "vesa"
[ 19.941] (II) Unloading vesa
[ 19.941] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 19.941] (II) LoadModule: "fbdev"
[ 19.941] (WW) Warning, couldn't open module fbdev
[ 19.941] (II) UnloadModule: "fbdev"
[ 19.941] (II) Unloading fbdev
[ 19.941] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 19.941] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge, Sandybridge, Sandybridge, Sandybridge, Sandybridge,
Sandybridge, Sandybridge
[ 19.942] (++) using VT number 7
[ 19.948] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 19.948] drmOpenDevice: node name is /dev/dri/card0
[ 19.949] drmOpenDevice: open result is 9, (OK)
[ 19.949] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[ 19.949] drmOpenDevice: node name is /dev/dri/card0
[ 19.949] drmOpenDevice: open result is 9, (OK)
[ 19.949] drmOpenByBusid: drmOpenMinor returns 9
[ 19.949] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[ 19.949] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 19.949] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 19.949] (==) intel(0): RGB weight 888
[ 19.949] (==) intel(0): Default visual is TrueColor
[ 19.949] (II) intel(0): Integrated Graphics Chipset: Intel(R) 965GM
[ 19.949] (--) intel(0): Chipset: "965GM"
[ 19.949] (**) intel(0): Relaxed fencing enabled
[ 19.949] (**) intel(0): Framebuffer tiled
[ 19.949] (**) intel(0): Pixmaps tiled
[ 19.949] (**) intel(0): 3D buffers tiled
[ 19.949] (**) intel(0): SwapBuffers wait enabled
[ 19.949] (==) intel(0): video overlay key set to 0x101fe
[ 19.957] (II) intel(0): Output LVDS1 has no monitor section
[ 19.976] (II) intel(0): Output VGA1 has no monitor section
[ 19.976] (II) intel(0): EDID for output LVDS1
[ 19.976] (II) intel(0): Manufacturer: AUO Model: 11ec Serial#: 0
[ 19.976] (II) intel(0): Year: 2008 Week: 1
[ 19.977] (II) intel(0): EDID Version: 1.3
[ 19.977] (II) intel(0): Digital Display Input
[ 19.977] (II) intel(0): Max Image Size [cm]: horiz.: 34 vert.: 19
[ 19.977] (II) intel(0): Gamma: 2.20
[ 19.977] (II) intel(0): No DPMS capabilities specified
[ 19.977] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 19.977] (II) intel(0): First detailed timing is preferred mode
[ 19.977] (II) intel(0): redX: 0.640 redY: 0.342 greenX: 0.310 greenY: 0.580
[ 19.977] (II) intel(0): blueX: 0.150 blueY: 0.120 whiteX: 0.313 whiteY: 0.329
[ 19.977] (II) intel(0): Manufacturer's mask: 0
[ 19.977] (II) intel(0): Supported detailed timing:
[ 19.977] (II) intel(0): clock: 72.0 MHz Image Size: 344 x 193 mm
[ 19.977] (II) intel(0): h_active: 1366 h_sync: 1414 h_sync_end 1446 h_blank_end 1486 h_border: 0
[ 19.977] (II) intel(0): v_active: 768 v_sync: 771 v_sync_end 775 v_blanking: 806 v_border: 0
[ 19.977] (II) intel(0): Supported detailed timing:
[ 19.977] (II) intel(0): clock: 72.0 MHz Image Size: 344 x 193 mm
[ 19.977] (II) intel(0): h_active: 1366 h_sync: 1414 h_sync_end 1446 h_blank_end 1486 h_border: 0
[ 19.977] (II) intel(0): v_active: 768 v_sync: 771 v_sync_end 775 v_blanking: 806 v_border: 0
[ 19.977] (II) intel(0): M094G€B156XW1
[ 19.977] (II) intel(0): Unknown vendor-specific block 0
[ 19.977] (II) intel(0): EDID (in hex):
[ 19.977] (II) intel(0): 00ffffffffffff0006afec1100000000
[ 19.977] (II) intel(0): 01120103902213780ae6b5a3574f9426
[ 19.977] (II) intel(0): 1e505400000001010101010101010101
[ 19.977] (II) intel(0): 010101010101201c5678500026303020
[ 19.977] (II) intel(0): 340058c11000001a201c567850002630
[ 19.977] (II) intel(0): 3020340058c11000001a000000fe004d
[ 19.977] (II) intel(0): 30393447804231353658573100000000
[ 19.977] (II) intel(0): 00000000000000000001010a202000df
[ 19.977] (II) intel(0): EDID vendor "AUO", prod id 4588
[ 19.977] (II) intel(0): Printing DDC gathered Modelines:
[ 19.977] (II) intel(0): Modeline "1366x768"x0.0 72.00 1366 1414 1446 1486 768 771 775 806 +hsync -vsync (48.5 kHz)
[ 19.977] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[ 19.977] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 19.977] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 19.977] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[ 19.977] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[ 19.977] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[ 19.977] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[ 19.977] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[ 19.977] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[ 19.977] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[ 19.977] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[ 19.977] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[ 19.977] (II) intel(0): Printing probed modes for output LVDS1
[ 19.977] (II) intel(0): Modeline "1366x768"x60.1 72.00 1366 1414 1446 1486 768 771 775 806 +hsync -vsync (48.5 kHz)
[ 19.977] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 19.977] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 19.977] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 19.977] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 19.996] (II) intel(0): EDID for output VGA1
[ 19.996] (II) intel(0): Output LVDS1 connected
[ 19.996] (II) intel(0): Output VGA1 disconnected
[ 19.996] (II) intel(0): Using exact sizes for initial modes
[ 19.996] (II) intel(0): Output LVDS1 using initial mode 1366x768
[ 19.996] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 19.996] (II) intel(0): Kernel page flipping support detected, enabling
[ 19.996] (++) intel(0): DPI set to (96, 96)
[ 19.996] (II) Loading sub module "fb"
[ 19.996] (II) LoadModule: "fb"
[ 19.997] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 20.006] (II) Module fb: vendor="X.Org Foundation"
[ 20.006] compiled for 1.10.1, module version = 1.0.0
[ 20.006] ABI class: X.Org ANSI C Emulation, version 0.4
[ 20.006] (II) Loading sub module "dri2"
[ 20.006] (II) LoadModule: "dri2"
[ 20.007] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 20.007] (II) Module dri2: vendor="X.Org Foundation"
[ 20.007] compiled for 1.10.1, module version = 1.2.0
[ 20.007] ABI class: X.Org Server Extension, version 5.0
[ 20.007] (==) Depth 24 pixmap format is 32 bpp
[ 20.007] (II) intel(0): [DRI2] Setup complete
[ 20.007] (II) intel(0): [DRI2] DRI driver: i965
[ 20.007] (II) intel(0): Allocated new frame buffer 1408x768 stride 5632, tiled
[ 20.041] (II) UXA(0): Driver registered support for the following operations:
[ 20.041] (II) solid
[ 20.041] (II) copy
[ 20.041] (II) composite (RENDER acceleration)
[ 20.041] (II) put_image
[ 20.041] (II) get_image
[ 20.041] (==) intel(0): Backing store disabled
[ 20.041] (==) intel(0): Silken mouse enabled
[ 20.042] (II) intel(0): Initializing HW Cursor
[ 20.063] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 20.063] (==) intel(0): DPMS enabled
[ 20.063] (==) intel(0): Intel XvMC decoder enabled
[ 20.063] (II) intel(0): Set up textured video
[ 20.063] (II) intel(0): Set up overlay video
[ 20.063] (II) intel(0): [XvMC] i965_xvmc driver initialized.
[ 20.063] (II) intel(0): direct rendering: DRI2 Enabled
[ 20.063] (==) intel(0): hotplug detection: "enabled"
[ 20.064] (--) RandR disabled
[ 20.064] (II) Initializing built-in extension Generic Event Extension
[ 20.064] (II) Initializing built-in extension SHAPE
[ 20.064] (II) Initializing built-in extension MIT-SHM
[ 20.064] (II) Initializing built-in extension XInputExtension
[ 20.064] (II) Initializing built-in extension XTEST
[ 20.064] (II) Initializing built-in extension BIG-REQUESTS
[ 20.064] (II) Initializing built-in extension SYNC
[ 20.064] (II) Initializing built-in extension XKEYBOARD
[ 20.064] (II) Initializing built-in extension XC-MISC
[ 20.064] (II) Initializing built-in extension SECURITY
[ 20.064] (II) Initializing built-in extension XINERAMA
[ 20.064] (II) Initializing built-in extension XFIXES
[ 20.064] (II) Initializing built-in extension RENDER
[ 20.064] (II) Initializing built-in extension RANDR
[ 20.064] (II) Initializing built-in extension COMPOSITE
[ 20.064] (II) Initializing built-in extension DAMAGE
[ 20.210] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 20.210] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 20.210] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 20.210] (II) AIGLX: enabled GLX_SGI_make_current_read
[ 20.210] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 20.210] (II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/i965_dri.so
[ 20.210] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 20.211] (II) intel(0): Setting screen physical size to 361 x 203
[ 20.500] (II) config/udev: Adding input device Video Bus (/dev/input/event7)
[ 20.500] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 20.500] (II) LoadModule: "evdev"
[ 20.500] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 20.514] (II) Module evdev: vendor="X.Org Foundation"
[ 20.514] compiled for 1.10.0, module version = 2.6.0
[ 20.514] Module class: X.Org XInput Driver
[ 20.514] ABI class: X.Org XInput driver, version 12.2
[ 20.514] (II) Using input driver 'evdev' for 'Video Bus'
[ 20.514] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 20.514] (**) Video Bus: always reports core events
[ 20.514] (**) Video Bus: Device: "/dev/input/event7"
[ 20.530] (--) Video Bus: Found keys
[ 20.530] (II) Video Bus: Configuring as keyboard
[ 20.530] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A03:00/LNXVIDEO:01/input/input7/event7"
[ 20.530] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
[ 20.530] (**) Option "xkb_rules" "evdev"
[ 20.530] (**) Option "xkb_model" "evdev"
[ 20.530] (**) Option "xkb_layout" "us"
[ 20.564] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 20.564] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 20.564] (II) Using input driver 'evdev' for 'Power Button'
[ 20.564] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 20.564] (**) Power Button: always reports core events
[ 20.564] (**) Power Button: Device: "/dev/input/event2"
[ 20.580] (--) Power Button: Found keys
[ 20.580] (II) Power Button: Configuring as keyboard
[ 20.580] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2/event2"
[ 20.580] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 20.580] (**) Option "xkb_rules" "evdev"
[ 20.580] (**) Option "xkb_model" "evdev"
[ 20.580] (**) Option "xkb_layout" "us"
[ 20.580] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[ 20.580] (II) No input driver/identifier specified (ignoring)
[ 20.581] (II) config/udev: Adding input device Sleep Button (/dev/input/event3)
[ 20.581] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 20.581] (II) Using input driver 'evdev' for 'Sleep Button'
[ 20.581] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 20.581] (**) Sleep Button: always reports core events
[ 20.581] (**) Sleep Button: Device: "/dev/input/event3"
[ 20.596] (--) Sleep Button: Found keys
[ 20.596] (II) Sleep Button: Configuring as keyboard
[ 20.596] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3/event3"
[ 20.596] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD)
[ 20.596] (**) Option "xkb_rules" "evdev"
[ 20.596] (**) Option "xkb_model" "evdev"
[ 20.596] (**) Option "xkb_layout" "us"
[ 20.600] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event8)
[ 20.600] (II) No input driver/identifier specified (ignoring)
[ 20.600] (II) config/udev: Adding input device HDA Intel Mic (/dev/input/event10)
[ 20.600] (II) No input driver/identifier specified (ignoring)
[ 20.601] (II) config/udev: Adding input device HDA Intel Headphone (/dev/input/event11)
[ 20.601] (II) No input driver/identifier specified (ignoring)
[ 20.601] (II) config/udev: Adding input device HDA Intel Mic (/dev/input/event9)
[ 20.601] (II) No input driver/identifier specified (ignoring)
[ 20.607] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 20.607] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 20.607] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 20.607] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 20.607] (**) AT Translated Set 2 keyboard: always reports core events
[ 20.607] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 20.640] (--) AT Translated Set 2 keyboard: Found keys
[ 20.640] (II) AT Translated Set 2 keyboard: Configuring as keyboard
[ 20.640] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 20.640] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
[ 20.640] (**) Option "xkb_rules" "evdev"
[ 20.640] (**) Option "xkb_model" "evdev"
[ 20.640] (**) Option "xkb_layout" "us"
[ 20.641] (II) config/udev: Adding input device PS/2 Mouse (/dev/input/event4)
[ 20.641] (**) PS/2 Mouse: Applying InputClass "evdev pointer catchall"
[ 20.641] (II) Using input driver 'evdev' for 'PS/2 Mouse'
[ 20.641] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 20.641] (**) PS/2 Mouse: always reports core events
[ 20.641] (**) PS/2 Mouse: Device: "/dev/input/event4"
[ 20.660] (--) PS/2 Mouse: Found 3 mouse buttons
[ 20.660] (--) PS/2 Mouse: Found relative axes
[ 20.660] (--) PS/2 Mouse: Found x and y relative axes
[ 20.660] (II) PS/2 Mouse: Configuring as mouse
[ 20.660] (**) PS/2 Mouse: YAxisMapping: buttons 4 and 5
[ 20.660] (**) PS/2 Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 20.660] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input4/event4"
[ 20.660] (II) XINPUT: Adding extended input device "PS/2 Mouse" (type: MOUSE)
[ 20.660] (II) PS/2 Mouse: initialized for relative axes.
[ 20.660] (**) PS/2 Mouse: (accel) keeping acceleration scheme 1
[ 20.660] (**) PS/2 Mouse: (accel) acceleration profile 0
[ 20.660] (**) PS/2 Mouse: (accel) acceleration factor: 2.000
[ 20.660] (**) PS/2 Mouse: (accel) acceleration threshold: 4
[ 20.660] (II) config/udev: Adding input device PS/2 Mouse (/dev/input/mouse0)
[ 20.660] (II) No input driver/identifier specified (ignoring)
[ 20.661] (II) config/udev: Adding input device AlpsPS/2 ALPS GlidePoint (/dev/input/event5)
[ 20.661] (**) AlpsPS/2 ALPS GlidePoint: Applying InputClass "evdev touchpad catchall"
[ 20.661] (**) AlpsPS/2 ALPS GlidePoint: Applying InputClass "touchpad catchall"
[ 20.661] (II) LoadModule: "synaptics"
[ 20.661] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 20.667] (II) Module synaptics: vendor="X.Org Foundation"
[ 20.667] compiled for 1.10.0, module version = 1.4.0
[ 20.667] Module class: X.Org XInput Driver
[ 20.667] ABI class: X.Org XInput driver, version 12.2
[ 20.667] (II) Using input driver 'synaptics' for 'AlpsPS/2 ALPS GlidePoint'
[ 20.667] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 20.667] (**) AlpsPS/2 ALPS GlidePoint: always reports core events
[ 20.667] (**) Option "Device" "/dev/input/event5"
[ 20.793] (--) AlpsPS/2 ALPS GlidePoint: x-axis range 0 - 1023
[ 20.793] (--) AlpsPS/2 ALPS GlidePoint: y-axis range 0 - 767
[ 20.793] (--) AlpsPS/2 ALPS GlidePoint: pressure range 0 - 127
[ 20.793] (--) AlpsPS/2 ALPS GlidePoint: buttons: left right middle
[ 20.793] (--) AlpsPS/2 ALPS GlidePoint: invalid finger width range. defaulting to 0 - 16
[ 20.793] (**) Option "TapButton1" "0"
[ 20.793] (**) Option "TapButton2" "2"
[ 20.793] (**) Option "TapButton3" "3"
[ 20.900] (--) AlpsPS/2 ALPS GlidePoint: touchpad found
[ 20.900] (**) AlpsPS/2 ALPS GlidePoint: always reports core events
[ 20.953] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input5/event5"
[ 20.953] (II) XINPUT: Adding extended input device "AlpsPS/2 ALPS GlidePoint" (type: TOUCHPAD)
[ 20.953] (**) AlpsPS/2 ALPS GlidePoint: (accel) MinSpeed is now constant deceleration 2.5
[ 20.953] (**) AlpsPS/2 ALPS GlidePoint: MaxSpeed is now 1.75
[ 20.953] (**) AlpsPS/2 ALPS GlidePoint: AccelFactor is now 0.156
[ 20.953] (**) AlpsPS/2 ALPS GlidePoint: (accel) keeping acceleration scheme 1
[ 20.953] (**) AlpsPS/2 ALPS GlidePoint: (accel) acceleration profile 1
[ 20.953] (**) AlpsPS/2 ALPS GlidePoint: (accel) acceleration factor: 2.000
[ 20.953] (**) AlpsPS/2 ALPS GlidePoint: (accel) acceleration threshold: 4
[ 20.986] (--) AlpsPS/2 ALPS GlidePoint: touchpad found
[ 20.987] (II) config/udev: Adding input device AlpsPS/2 ALPS GlidePoint (/dev/input/mouse1)
[ 20.987] (II) No input driver/identifier specified (ignoring)
[ 20.989] (II) config/udev: Adding input device Dell WMI hotkeys (/dev/input/event6)
[ 20.989] (**) Dell WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[ 20.989] (II) Using input driver 'evdev' for 'Dell WMI hotkeys'
[ 20.989] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 20.989] (**) Dell WMI hotkeys: always reports core events
[ 20.989] (**) Dell WMI hotkeys: Device: "/dev/input/event6"
[ 20.996] (--) Dell WMI hotkeys: Found keys
[ 20.996] (II) Dell WMI hotkeys: Configuring as keyboard
[ 20.996] (**) Option "config_info" "udev:/sys/devices/virtual/input/input6/event6"
[ 20.996] (II) XINPUT: Adding extended input device "Dell WMI hotkeys" (type: KEYBOARD)
[ 20.996] (**) Option "xkb_rules" "evdev"
[ 20.996] (**) Option "xkb_model" "evdev"
[ 20.996] (**) Option "xkb_layout" "us"
Thanks for your patience and thanks for help

High CPU usage when selecting certain emails

I experience (above) 100% CPU usage in Mail.app when selecting certain emails. Mostly emails from the same sender.
The emails contain MIME multipart data. One part is BASE64 encoded text, the other is quoted-printable encoded HTML.
I can see in the process trace that two threads seem to be thrashing around in MFRedundantTextIdentifier.
CPU usage goes up. I can still use the application (it is not blocked). But it cannot be quit normally (only with force quit).
Apple engineers: this must be something that you would wish to find and fix?
Any help with diagnosing would be greatly appreciated!
Sincerely.
-dennis

Maybe my initial post was not clear so let me add some clarifications.
I have the problem with Aero disabled
I have the problem on the Apple site which does not have any flash content.
I have already hacked the lastest nvidia drivers to get them on my system which did not change anything. Can you provide a link to some other 'supported' beta drivers?
I am using the new 13 inch air so it has the newer graphics card so I would expect it to be faster than an old HTPC with a 9400m in it. I wasn't stating that my Air had a 9400m.
It would be great if someone you also do the test to check the cpu load:
- when playing a 720 mkv
- when dragging a window across the screen
Just open task manager and see if the CPU spikes.
Many thanks!

Why CPU Usage showing spiky line when Demand showing a smooth line?

Similar Messages

Maybe you are looking for