Why crashes LV 8.0.1 when opening remote panel
Hi everybody,
everytime I try to open a remote panel to my vi from another VI Labview (remote client) crashes completely. It worked fine with LV 8.0 but not with LV 8.0.1 on a linux machine (Suse 10.0). When I try to open the panel in a browser it says that the run time engine is missing. But installing the rte doesn't work because the script says it's already installed. There is no difference if I try it locally or on a remote machine, both running LV 8.0.1 on Suse linux 10.0.
I'd appreciate any tip, thanks
Clemens
Hi Robert,
I just gave up using Lv 8.0.1 because I had nothing but problems with it and the original problem I instellad it for wasn't solved and in the meantime I was told I had to live with it. The strange thing with the RTE was that it worked with some vi's but not with all. But it worked with all vi's usting LV 80. The migration form LV 7.1 to 8.xx took so much time that I'll stay as long as possible with it ignoring all further updates.
Regards Clemens
Similar Messages
-
Why do Word Documents get distorted when opened in Pages?
Why do Word documents get distorted when opened in Pages?
ssprengel wrote:
The screenshots you’ve posted look very similar to me, but they are all composed of tiny dots not a continuous-tone image.
Yes. They don't make any sense to me either. Are we supposed to be looking at a blank dark gray rectangle, or has the upload process failed the OP ? -
Why PSA data show red status when opened but green on PSA page?
Run RSA1 -> click PSA to open PSA page, locate one infosource and find the PSA under it, find the status column shows it's green, but when opening it, find the 1st column shows red for each row. How does the inconsitance occur?
BTW, if we open the infopackage monitor for the above one, find a weird thing is that each request get two consecutive processes running with a circle of red ball and green ball in the left frame. Double click one of them, in the right frame and click the monitor Status tab, the msg window is as following (in between two dashed lines below):
Incorrect data records - error requests (total status GREEN)
Diagnosis
Data records were recognized as incorrect.
System response
The valid records were updated in the data target and can be used in reporting.
The incorrect records were not written to the data target, but were posted retractively under a new request number in the PSA.
Procedure
Check the data in the error requests, correct the errors, and post the error requests.
Sounds like the data failed to uploaded to data target due to error in PSA, but why the status show green in somewhere? And if clicking the Details tab, all show green! Weird!
ThanksHi Kevin,
In your InfoPackage Update tab, click the Error Handling button. It seems that the Valid records update, request green option is chosen. This is why you see the green request and some error records.
This means that the corect reocrds were loaded and are available for reporting, but the incorrect ones were left behind. This is used to check the erro records separatelt so that they do not disrupt the entire data load.
Hope this helps... -
InDesign crashes when opening certain panels
InDesign has been acting up since yesterday with a product catalog that I have been developing.
Anytime that I have the file open and I try to access the cross reference panel or the hyperlinks panel, ID crashes.
If I open the panels without the file. It works fine. But only when I open the file back up do I have issues.
Also, ID has been running VERY slow when this file is open.
Any help is appreciated.
Thanks!
Mac OS X 10.9
InDesign CC v9.2I should note that it works fine on other computers now too. Just not my desktop.
-
Remote Desktop MAC version 8.0.5 crashing when opening format panel in Excel
Remote Desktop MAC version 8.0.5 crashing when opening a format panel in Excel. Attempt to reconnect via RDC do not work until you log into Windows direct and close the formatting window. I'm running Windows 7 Pro, Service Pack 1 and using Microsoft
Remote Desktop version 8.0.5 on a Mac running OS X 10.9.2. Reproduced error 3 times. Has also twice caused Excel to crash, so error does seem specific to the Windows environment and/or interaction with RDC (i.e. - not Mac related).Hi,
Would you please provide us the log file for check after issue occurs.
Microsoft Remote Desktop -> About Microsoft Remote Desktop -> Send log via email -> Copy and paste the log here.
Thanks.
Jeremy Wu
TechNet Community Support -
Hi,
I have few sharepoint 2013 site's, which I am trying to open in sharepoint designer 2013.
After adding the site name in open site and clicking ok, the sharepoint designer crashes. At times the sites open, but 90% of the time, the sharepoint 2013 designer has crashed. I get the message "The server could not complete the request. For
more specific information, click on the Details button".
When clicking on "Details" button, there is a empty box. The error message never gets closed and have to kill the process.
I have tried doing "IISreset" multiple times, which has not helped.
Has anybody faced this issue? How to fix this?
ThanksHi Venkatzeus,
Firstly, I need to verify the followings:
1.Whether this issue occurred on a specify SharePoint 2013 site.
2.Whether you have extended the problematic site.
Make sure that your user is a site administrator. If you have extended the problematic site, please add it to AAM.
There are other probable causes for this issue:
1.Anonymous authentication is not configured for the problematic web application in IIS
Fix: Enable Anonymous authentication in IIS
2.Server is running out of memory
Fix: Free up memory on the server
Here are some similar articles for you to take a look at :
http://forums.bitwiseglobal.com/forum/sharepoint/the-server-could-not-complete-your-request-for-more-specific-information-click-the-details-button/
http://tjendarta.wordpress.com/2013/05/24/fix-sharepoint-designer-2013-the-server-could-not-complete-your-request-for-more-specific-information-click-the-details-below/
http://social.technet.microsoft.com/Forums/sharepoint/en-US/11854880-e85d-4e4c-ae9c-0ffd640d33d8/error-the-server-could-not-complete-your-request-while-opening-site-in-sharepoint-designer?forum=sharepointadminprevious
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/f93e155e-2c65-4744-a1d0-96cdbd50014d/sharepoint-designer-error-the-server-could-not-complete-your-request
I hope this helps.
Thanks,
Wendy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
I have a problem: Documents I created in Pages 2009, when opened in the new Pages I get "objects in tables were removed".
This makes all my documents useless !
Is there any way to get the objects (images and tables mostly) to load into the tables across all my documents ?No, there isn't. Use Pages 09 with your old documents and Pages 5.0 for creating new ones. Do you really need Pages 5.0 is the question you need to answer. If not, don't.
-
Why does my ipad2 hang-up when opening links on websites?
My ipad2 hangs up when opening links on websites
Hello David,
The article linked below provides some useful troubleshooting steps that can help stabilize FaceTime on your Mac.
FaceTime for Mac: Troubleshooting FaceTime
http://support.apple.com/kb/TS4185
Cheers,
Allen -
Initially, when I open Firefox everything opens very quickly. However, after several minutes it gets hung up when opening new pages. I have close the browser and reopen it to start over. But each time it does the same thing. Works well at first then poops out. The trouble started yesterday. Before then, I never had any problems.
I've tried disabling all the plugins and extensions, but it doesn't make any difference.Try to repair the disk permissions:
* http://thexlab.com/faqs/repairprocess.html
* http://support.apple.com/kb/HT2963 Troubleshooting permissions issues in Mac OS X -
The majority of my systems are having a problem with Acrobat Reader 9.0 and 9.1.
When they click on a PDF from within IE the browser crashes with the following error:
sw: iexplore.exe - Application Error
The instruction at '0x051251b6" referenced memory at '0x00000010". The memory could not be "read".
Running AR 8 causes no difficulty, however I have an organizational requirement to have addressed the in-the-wild vulnerability of AR by March 18th for 100% of my client systems. And Adobe is holding on to those versions until the 18th.
So I _have_ to install 9.1 on 300 systems in the next 36 hours.
If I take the check mark out of 'Display PDF in Browser' it works fine. The problem with this solution is that there are certain web sites and applications that departments here use which absolutely requires that the PDF be integrated within the browser - so taking Display PDF in Browser is not a universal solution.
I have tried the following key to no luck:
[HKEY_LOCAL_MACHINE\SOFTWARE\Classes\SOFTWARE\Adobe\Acrobat\Exe]
@="\"C:\\Program Files\\Adobe\\Reader 9.0\\Reader\\AcroRd32.exe\""
On a couple of machines opening up Reader and closing it first while having admin rights clears up the problem - but not for the majority of my systems.
I've tried repairs, reinstalls, full reloads and reboots to very little luck.
It's is for various PDF files from different sites, and it's the same ones that work for the small number of systems not experiencing a problem.
Any suggestions would be welcome.> Adobe is holding on to those versions until the 18th.
The 18th is tomorrow, so why not wait for it? -
Why is 'save as' greyed out when opening a document from outlook?
I cannot save a pdf document when I open a pdf attachment from outlook.
Why would I want to add extra steps to a process that is performed many times daily as routine. The purpose of the program is to view the file, and then save it in a permanent file.
There are always workarounds, but why not make the program perform as intended? -
X-Code 5.0.2 crashing in Mavericks 10.9 when opening an existing project
Just updated X-Code to 5.0.2 and now it crashes when I try to open an existing project. Seems to OK when a new project is started though.
What am I doing worng?I had the same issue then I found out all you have to do is to set the default view to List before opening any previous or new project and it worked, credit goes to this user below who found the solution.
ahmedMac25
I was able to resolve by workaround:
1. Closed all open applications
2. relaunch Finder
3. run sudo find / -name ".DS_Store" -exec rm {} \;
4. this removes all .DS_Store old files on the computer
5. launch finder and set default view to "LIST VIEW" as shown here:http://macs.about.com/od/usingyourmac/ss/Setting-Finder-Views-For-Folders-And-Su b-Folders_2.htm
5. rerun the offending application and file chooser works -
Why doesn't Personal.xlsb start when opening a different SS
I have my personal.xlsb installed in the following folder;
C:\Users\Toni Chaffin\AppData\Roaming\Microsoft\Excel\XLSTART
Why when I open a already completed WorkBook, say stats.xlsm why doesn't my personal workbook open so I can run macros that I have saved in there
Thanks
Toni Chaffin aka TalisaI am experiencing the same exact issue. Running Office 2010 and whenever I open an xlsm file by double clicking on it in Windows Explorer, it opens in Excel but the macros do not open. If I open the VBA editor, only the current document is shown in there
and not the macros.
Opening Excel first and then dragging the spreadsheet file from Windows Explorer into Excel does work, and while the answers here are workarounds, they are far from solutions and are a very cumbersome workaround when dealing with multiple files.
Can anyone help with a proper solution to the issue? I've tried adding my XLSTART folder to the "At startup, open all files in:" setting in the Advanced options menu, and that has done nothing.
Thanks,
Mike -
Why is Photoshop CC freezing indefinitely when opening files?
Anytime I open a file in in Photoshop CC it will freeze for indefinite periods of time, even when my laptop is left for hours. A few updates ago, the program worked perfectly smoothly, even with multiple large files opened, but even small ones now make it freeze up. I end up having to force close the program in Task Manager because no other programs will work at the same time when this happens.
I don't know what I'm doing or what might be wrong with my laptop, but the program used to work like a charm and now it doesn't. I haven't noticed problems with any other programs. However, I am running a trial program right now instead of the full version like I was before.
Why might this be happening and what can I do about it?This is more likely to do with your operating system than Photoshop, even if other applications are able to save OK. We can see you are using Windows, but what version, and how long has it been installed? And what are the hardware specs?
Something that might cause similar problems would be if the operating system was being starved of resources, like if you have Photoshop > Preferences > Performances set with Photoshop using 100% memory. If you are using Task manager to close Photoshop, have it open to the Performance tab so you can see what is happening when you try to save. Is memory and/or CPU maxed out, for instance? -
Why is there no back arrow when opening a link in Twitter?
When I click on a link in Twitter, I can read the story, but there is no way to get back to the Twitter feed without pushing the main home button on the iPad, and starting all over again by clicking on the app. . Why is there no back arrow, to go back to where you started without going all the way out to the home screen?
If the menu bar is hidden then press the F10 key or hold down the Alt key, that should make the menu bar appear.
Make sure that all the toolbars like the "Navigation Toolbar" and the "Bookmarks Toolbar" are visible: "View > Toolbars"
* If items are missing then open the Customize window via "View > Toolbars > Customize" or via "Firefox > Options > Toolbar Layout"
* If a missing item is in the toolbar palette then drag it back from the Customize window on the toolbar
* If you do not see an item on a toolbar and in the toolbar palette then click the "Restore Default Set" button to restore the default toolbar set up.
See also:
* http://kb.mozillazine.org/Toolbar_customization
Maybe you are looking for
-
How much space do I need for back up when I upgrade?
Hi All, I'm going to upgrade to 10.8 from 10.6.8. I have never used time machine before, but am planning to do so now to back up before upgrading. My disc is around 600GB in total. If all goes fine, after a few days I plan to back up again with the n
-
Question about suming two columns from different tables in Subquery?
Hello everyone, I have a subquery that works great for getting the total SUM of a Billing table, but I also need to add to that SUM the total surcharges or additional charges from a separate table. I tried this by doing something like so: (SELECT SU
-
Disable Technical Information for UI Element in WEB DYNPRO ABAP
Hi expert, I want to disable Technical Information for UI Element in my web-dynpro application i am alredy disable in user setting by parameters WDDISABLEUSERPERSONALIZATION by i want to disbale other two options 1 Display quick help.
-
I got an emai from "find my iphone" saying my phone was erased.. and it was! Why did this happen?
-
New Track Pad Issues After 10.6.4 Update
I understand that the Mac OS X 10.6.4 was meant to address some track pad issues. I was not experiencing any track pad issue on my Late 2009 MacBook Pro prior to the update. However now my laptop is almost unusable! The pointer tracking remains accur