Why DBMS_SQLTUNE task status shows "INITIAL" all the time?

I created this hours ago, it still shows "INITIAL", not "COMPLETED":
SQL> SELECT task_name, status FROM dba_advisor_log WHERE owner = 'EMSUSER';
TASK_NAME STATUS
EMSUSER Tuning Task INITIAL
Will it even "COMPLETED"? Thanks.
- Zac

Thanks!
The exec was left in the second script. That was the problem.
Zac

Similar Messages

Why does my iPad reset itself all the time?

Why does my iPad reset itself all the time?

Hello!
The same happened to my yesterday night when I was charging my iPhone 5 with iOS 6.1. My first impression was that could it be and auto update (to install iOS 6.1.2) however I'm still on 6.1.
It erased ALL my info and shows the initial configuration wizard......this is totally a mega ***!!!!!!

Why is my screen zooming in all the time? and what can I do to prevent it?

Why is my screen zooming in all the time? and what can I do to prevent it?

Press the key combination option-command-8 to disable Zoom. If you're using an Apple wireless mouse, open theMouse pane in System Preferences and uncheck the box marked Smart zoom.

Why do you charge my cc all the time?

you charged my cc all the time why?
i didnt purchase from you so long?

Answered here > https://discussions.apple.com/message/23824520#23824520
No need to multiple post

Why can't I get online all the time with my iPad?

Sometimes when I open my iPad2, I click on an app that needs to be online to be accessed, and nothing happens. I have to turn off, then on again my WiFi. Why am I not able to access the internet all the time. WiFi at home works fine with my MacBook Air all the time.

No firewall. My office is in my home. The iPad is on my desk right next to he Netgear router. Router is only 6 months old.
Sometimes I can open iPad and get online right away. Other times my apps won't update, and I have to turn wifi off, then on again. This is a ROYAL pain! My Air works great as does everyone else's laptop who visits me.
I am a hug Apple fan, so this is stumping me.

Why does iTunes use 100% CPU all the time, hogging my Macbook Air?

Decided to post this here instead of the iTunes forum, since it might be related to hardware too.
New owner of a 2011 13" Macbook Air, core i5 based.
My problem started about 1 week ago, after it had run out of power completely one day. At the first boot after that it was incredibly sluggish, totally unusable. After waiting for 5 minutes and still being unresponsive, I turned it off and then back on. Then it booted fine. HOWEVER, ever since that time I noticed the following behavior:
- iTunes stays at 100% + CPU all the time, mostly between 100-120%. Even if it's not playing. Even when I deleted the entire library and left it empty.
- iStats reports CPU idle between 50-65%. However, CPU temperature is still about 55 degrees C (which, I think, is far less than what it should have been with 50% idle cpu). I can confirm the low temperature by touching the chasis.
- the cursor freezes and jumps every few seconds, making the mac kind of unusable with iTunes open.
This has been going on for 2 weeks now. The problem goes away every now and then (iTunes sometimes goes back to regular CPU usage of 3-5%), but most of the time it's there.
Help!
P.S.
Mac OX X 10.7.2
iTunes 10.5.2

Cee Pee You, is a OS modification. Apple recommends that you un-install these prior to a OS update because Apple makes changes to the OS all the time which breaks programs like these.
I avoid Unsanity LLC products like the plague. Notice the company is a Limited Liability Corporation (LLC), which makes it difficult to sue the company in case of a defective or malicious product. So the risk using their products is all yours. Their APE framework modules have been used for malicious purposes because anyone can write a module that uses the APE framework.
I also avoid installing anything that requires a administrative password unless I completely trust the source, like Apple mostly. That admin password is the key to the security of our machines, not to be given out lightly or carelessly.
You'll have to contact Unsanity's [email protected] because what I'm reading online is it's very difficult to remove as it doesn't "exist".
http://forums.macosxhints.com/archive/index.php/t-3616.html

Why does my iphone heat up all the time? it could be when im on an app or even if its just charging, and its not just warm, its really hot im worried and it surely shouldnt be doing this?

my iphone gets warm all the time, and i shouldnt be doing this, im sure there is a fault or something wrong with it, and i would like to know what to do and how to stop it, it gets really hot when i charge my phone and when im just on apps aswell, it shouldnt be doing this surely.. and it stops me from being able to charge my phone, as im worried its a hazard

My wife is having the same problems as a reciever. She works in a school as a teaching assistant and her teacher sends messages that are mixed with previous texts from ages ago.
Can anyone shed some light on this problem or is it only her and this poster?
2m42s

Why does my line attenuation change all the time?

Why would my line attenuation have gone from 65dB to 72.3dB? I think there is a bad connection on my line, but BT's test equipment says my line is fine.
1st ADSL Line Status
Connection Information
Line state:
Connected
Connection time:
0 days, 00:52:21
Downstream:
1.372 Mbps
Upstream:
659.6 Kbps
ADSL Settings
VPI/VCI:
0/38
Type:
PPPoA
Modulation:
G.992.5 Annex A
Latency type:
Interleaved
Noise margin (Down/Up):
6.2 dB / 5.8 dB
Line attenuation (Down/Up):
65.0 dB / 43.9 dB
Output power (Down/Up):
15.0 dBm / 12.4 dBm
FEC Events (Down/Up):
113157 / 9145
CRC Events (Down/Up):
421 / 240
Loss of Framing (Local/Remote):
0 / 0
Loss of Signal (Local/Remote):
0 / 0
Loss of Power (Local/Remote):
0 / 0
HEC Events (Down/Up):
1850 / 810
Error Seconds (Local/Remote):
169 / 215
2nd ADSL Line Status
Line state
Connected
Connection time
2 days, 12:34:52
Downstream
928 Kbps
Upstream
446 Kbps
ADSL Settings
VPI/VCI
0/38
Type
PPPoA
Modulation
G.992.5 Annex A
Latency type
Interleaved
Noise margin (Down/Up)
6.2 dB / 11.9 dB
Line attenuation (Down/Up)
72.3 dB / 44.0 dB
Output power (Down/Up)
1.4 dBm / 0.8 dBm
Loss of Framing (Local/Remote)
0 / 0
Loss of Signal (Local/Remote)
0 / 0
Loss of Power (Local/Remote)
0 / 0
FEC Errors (Down/Up)
5666 / 0
CRC Errors (Down/Up)
442 / 0
HEC Errors (Down/Up)
2257 / 0
Error Seconds (Local/Remote)
87 / 0

I got a reply from the chairmans office
I’ve spoken with BT
Wholesale again today and I’m waiting on a report coming in from the Chief
Engineers Office.
What I’ve
been doing
I’ve also gone
through all the history available of the work that has been done on your line
and can confirm the following:
Your line is
all copper and is on the best E and D side cables available.
We have changed
the network equipment in the exchange on multiple occasions.
And it doesn’t
look like there is any more physical work can be carried out.
The report I’m
waiting for from BT Wholesale is about a known issue that we have had with
certain exchange equipment which is used to make the phone ring when it is
being called and causing the broadband connections to drop, I need this to
confirm if your line is affected by this specific issue.
I think you
have spoke with Donal earlier today and discussed the option of moving onto an
8meg service instead of the upto 20meg, and you told him this has been tried
before and did not work, can you remember roughly when this was so I can check
it with BT Wholesale?
What happens
next
There is still
an engineer on his way out to you tomorrow between 1pm and 6pm. I’m not sure
what this engineer will be able to do given that we have had it confirmed that
you are already on the best lines available but we will see how he gets on and
take it from there. (Might get a nice surprise!)
I’ll give you a
call tomorrow to confirm the update from the chief engineers office and also
see if the engineer has been out on site with you.
Best Wishes
Chris
My reply
Hi,
Thanks for the reply, some of the information in your email isn’t correct.
The D-side is only the “best lines available” because it’s the only one available!
I had the BB disconnecting when the phone rang, long before going on the new equipment.
They have exchanged the network equipment on “multiple occasions”, even though I told them not to bother because I knew it would make no difference.
The facts are:
NO WORK has been done on my D-side (apart from the connections directly outside my property)
Many people that have had the same fault have told me it turned out to be the D-side
I was told by a BT Openreach engineer that they would not do any work on my D-side because part of it was aluminium. But this now turns out not to be true, so I have no idea why they will not do any work on my D-side.
At the cab, the broadband is the correct speed and works fine.
My caller display, often doesn't work. I think this is the same line fault that causes this.
A leakage to earth was detected on my line, but was never fixed.
My phone often rings 2 or 3 times, when I finish a call. I think this is the same line fault that causes this.
When the BB speed goes up, the router records a huge amount of errors.
A few years ago my BB failed altogether, it turned out to be the connection outside my property. The connection was green and in bad condition. There are loads more of these connections between my house and the cab, they will be just as old or older.
A BT engineers test equipment detected a change in resistance somewhere on my D-side, I haven’t heard if that was ever looked into.
Every piece of evidence points at a bad connection on my D-side, so you can see why I will not rest until I know that all the connections have been replaced. BT wholesales answer of “that there is nothing wrong with your line” just isn’t good enough because the fault still exists.

How do I keep the buttons from showing up all the time?

I made several little shapes in Photoshop and imported them, then made buttons out of them. But when I simulate the menu, the buttons are always on top of the motion menu, how do I get the buttons to not show until the entire motion menu has played?

The loop point is indeed set to 10 seconds in. But as the motion menu starts playing and the words are flying onto the screen, the button (custom key shape) is already on the screen. Is there not some kind of opacity setting where I can make the button invisible until all the words have loaded onscreen?
And I tried some of Apple's buttons, they do the same thing. The little bracket " >" is sitting there on screen while the words "Play" and "Scene Select" are flying in from off screen. Once it reaches 10 seconds, then the " > " highlights to yellow on "Play". But I do not want that little bracket to show onscreen until the word "Play" is even there yet!

Why does my mail beach ball all the time

Is there a conflict or bug in my new Lion?

Hello!
The same happened to my yesterday night when I was charging my iPhone 5 with iOS 6.1. My first impression was that could it be and auto update (to install iOS 6.1.2) however I'm still on 6.1.
It erased ALL my info and shows the initial configuration wizard......this is totally a mega ***!!!!!!

Why does you tube freeze up all the time?

Why when I'm trying to watch You Tube does it constantly freeze up making it useless to me?

I get the same problem and also when I'm trying to watch a preview of films or tv shows on iTunes via my Phone. Drives me mad.

Why does a colored wheel spin all the time

Why is there a colored wheel spinning and my computer freezes

Have no clue as you provided no details what-so-ever!
It would help us to know which comp model you have, which OS & version you're using, how much RAM, etc. You can have this info displayed on the bottom of every post by completing your system profile and filling in the information asked for.
This will help in providing you with the proper and/or correct solutions.
Please detail ALL you have done so far in the way of troubleshooting? Need this info to avoid the been there done that scenarios.
Check out: Troubleshoot the spinning beach ball/freezing & crashing and Troubleshoot the spinning beach ball

Why is my hard drive running all the time in Mountain Lion

My hard drive is powering up far more than it ever did with Lion, and this of course is killing battery power rapidly. Any one know why my hard drive runs so often on the new OS?
Thanks!

Great. Thanks. What I mean is my hard drive actually revs up and makes noise far more often than it ever did on Lion. It is actively engaged in a higher usage than ever before and this of course makes the battery quickly expire.
Would anyone else like to offer advice? Thanks!

How do i get ichat to stop showing up all the time

i am about to freak out. i was on photo booth and i pressed i chat. now it keeps showing up on my screen.how do i get rid of of?

Hi,
It sounds like you have got iChat set up in System Preference > Accounts > Login items (in your account)
Items in this List will start up when the Computer Starts Up.
On my Snow Leopard Computer (OS 10.6.8) In Photo Booth there is an iChat icon
This is supposed to put the pic you have selected in Photo Booth to be the iChat Buddy Pic
If you press this it will launch iChat and you have to "Set" or Cancel the Pic selection.
If you choose "Set" the Photo Booth Pic or Video becomes the Buddy Pic (The Video is converted to an Animated .gif)
10:02 PM Wednesday; August 8, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Lion 10.7.2)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Why do I have to render all the time?

This just started, never had this problem before. Everytime I make a small edit/corrrection/level change etc. I have to render the audio.Otherwise I get that beep sound on the unrendered audio portions.
Why is this. I was before able to edit and not having to render every second.
Thanks in advance for any tips.

Glad to help. Note that audio filters added to a clip will add the equivalent of additional tracks. Some filters add the equiv. of one track, others add more.
IOW, you could have realtime audio playback set for 4 tracks, only have four tracks in the timeline, but still hear that annoying beep-beep-beep as the TL plays back through clips with filters added. Simply make the realtime audio tracks playback number larger by one or two tracks at a time until the beeps go away.
Also note that you add more tracks of real time audio playback at the expense of RT video playback. Many editors will edit video first, until video is locked or nearly locked, then add more tracks of realtime audio playback before they start working on the audio. Then change the number back to 4 or 6, or whatever, after the audio work is finished.

Why DBMS_SQLTUNE task status shows "INITIAL" all the time?

Similar Messages

Maybe you are looking for