Why did bridge color my black and white photo?

I click on the black and white thumbnail and the preview was changed to color, and if you open the .nef file in PS.CS3 it opens it up in color! I don't remember asking to have my B&W photos colored. I looked in the help documentation but Black, White and Black and White are found! Please help.
Windows Vista & Xp (both machines)
Bridge and PS CS3
Nikon D200.
This is weird.

NEFs are RAW image files. They contain all of the data your camera captured, which means color. When you use the camera controls to set the image to sepia, b/w, etc., that only affects JPEG files and the JPEG thumbnail that initially shows up in Bridge before Bridge builds its own.

Similar Messages

  • Coloring in Black and White photos

    How do you color in a black and white photo?

    Actually you can very easily add color to a B&W picture using the Adjustment Brush with the 'Color' option set to the color you want to paint on the image area. You may also find using the 'Auto Mask' setting helps to confine the brush strokes to the area you are trying to fill. If you accidentally paint outside an area hold down the ALT key, which puts a in the brush allowing you to remove the color.
    You can also use this in reverse with a color image by first painting over the entire image using a large Adjustment Brush with Saturation set to -100. Next hold down the ALT key and paint (i.e. remove) in the area you want to reveal the original color. Optionally you can set a new Adjustment brush using the Color picker as detailed above for a B&W image to paint in a different color.
    You actually have three different options for painting inside LR and maybe even more if you think outside the box!

  • How do I add selective color to black and white photo?

    New to Photoshop Elements 12.  How do I add selective color to a black and white photo?

    The easiest way is to use the Smart Brush tool in Expert tab.
    On the tool's option bar, in the drop-down select "Revers Effects", then select the "Reverse" option. Be sure that "Inverse" is ticked.
    Paint over the object that is to retain color, the rest will become b/w.

  • Why do some black-and-white photos disappear in Mac Preview and Safari?

    I sent a PDF to a colleague recently only to discover that he uses Mac Preview to view PDFs and not Adobe Reader. The unfortunate part is that, although full-color photos all appeared, small black-and-whites were inconsistent: some appeared and others did not.
    Moreover, the same problem turns up when using Safari, though Google Chrome displays the PDF perfectly.
    One reference point is that a full version of the PDF appears just fine in Preview and Safari. It's when the original is reduced or optimized that some of the small black-and-white photos disappear. Of course all photos appear in Reader, even when they PDF is reduced or optimized.
    I have examined the small photos and have been unable to find any consistent trait among those that appear and among those that do not. I have experimented with them: layered and flat, with and without alpha channels, with and without profiles, as RGB and grayscale, with byte order for IBM PC and Mac, as TIFFs and JPEGs — in other words in every variation I could think of. I have used both Acrobat Pro 8.3.1 and Acrobat XI. Nothing I have tried has varied the outcome.
    The obvious solution is to avoid Mac Preview and Safari, but I am planning to distribute a complicated project to a large audience and can't control what viewers they use.
    Does anyone know what the problem is?

    As I reported and you confirm, the things I tried had no effect.
    You point to the compression and image settings, but that leaves the question why some photos and not others showed up: presumably they were all subjected to the same compression and image settings.
    There are a great many possible permutations of compression and image settings, and I'm on deadline. Is there perhpas a combination of compression and image settings you recommend?
    Thanks!

  • Trying to update and my nano screen goes from color to black and white...

    Last time this happened I lost all of the information on my ipod.
    I was trying to get my newly purchased music from itunes to my nano. I couldn't. The help sections told me to update my ipod. I'm currently trying to update with 2006-03-23 and the screen still says "initializing" and actually as I type this the screen that says initializing appears frozen (although I've learned apple stuff is weird because it appears frozen but it's not). How long should this take? Is there something I'm doing wrong? Why does my ipod screen go from color to black and white? Do I need to redo anything? Do I need to reset my nano?
    Please help with the ******** mac user (I've always used Windows and I am lost in the mac world apparently when it comes to ipods)

    Can you get the exact wording for that error? Is it can't mount iPod?
    Also, make sure iTunes is up to date...
    iTunes
    Finally, make sure your iPod's battery is charged up.
    btabz

  • PSE 8 coloring a black and white image

    Okay, so I downloaded a free trial of PSE 8, so my experience with it is limited, which may contribute to my problem. I've watched tutorials on how to add color to a black and white photo using the paintbrush tool, though I haven't watched one for PSE 8.
    I'll make a new layer, paint part of the picture, and then add another layer. But when I click a different color to paint with, it changes the color of what I already painted, even though I'm on a different layer.
    Also when I tried to just save the image with one part painted, it didn't save it, and the image looked as it did originally.
    Any help is appreciated! Thanks!

    Hi,
    Are you using the right tool to paint on a layer?
    For coloring a black and white image, you need to save different areas of your image on a different layer and then use either Paint brush or a Paint bucket tool.
    It seems that you are selecting a wrong tool. For selecting Brush, press B.
    Then try painting on one part of the image and then go to the the color swatch present at the end of the tools panel on the left as :
    Now click on the foreground color swatch(on the top) to change the color with which you want to paint.This will not change the color of other layers on changing the color.
    Cheers
    Swarnima

  • Q: How do I Mask/Layer a color photo with a black and white photo?

    This is what I want to do. I've done it before but cannot remember for the life of me how to do it again. I want to put a color photo under (its own) black and white photo and then erase or remove or something (I can't remember the tool to do it) but I want to be able to see some of the color photo in my black and white photo. For example, say I have a pic of the Disneyland Castle. I want to make the pic black and white and then with a layer or mask (whichever one) have the exact colors of the picture underneith it show up after I have used the paint brush to remove the black and white...is anyone understanding me? When I did it before I know I did it in only a few steps, it wasn't super complicated, and I'm probably stupid for not knowing how to do it now. Thanks!
    Lindsey Henry

    Lindsey,
    First, look at the Channels in the B/W. Probably, you can use one of those as a Selection and then as a Layer Mask. If not perfect, then you can likely get close. If you need to, you might want to Blend more than one of those Channels.
    If you have an issue "collecting" the Channels, just get your B/W into a separate Image, and then drag individual Channels back to your composite image, and use them, as is necessary.
    Hope that some of those ideas are useful,
    Hunt
    BTW - turn OFF the color for Channels, so that you can see them as B/W, as that will help you see their makeup.

  • Colors turned black and white

    Colors turned black and white. Tried Settings-General-Accessability-Grayscale…..didnt work. Please help

    You should look in settings > Accessibility.
    Not sure which option is black and white.  Did see a reverse colors.
    Robert

  • Can I change more than one photo from color to black and white at one time?

    can I change more than one photo from color to black and white at one time?

    Check out iPhoto Batch Enhancer
    http://www.feroxsoft.com/ibe/index.php.en
    Regards
    TD

  • How do I change an hp officejet j6400 printer change from color to black and white?  I have a Mac 10.8 OX system

    How do I change an hp officejet j6400 printer change from color to black and white?
    I have a Mac 10.8 OX system

    Hi JasperNM,
    You may access a card within the cart reader by mapping a network drive to access it, then you may transfer the fies to your Mac.
    First locate the printer IP address as following:
    Follow these steps to print a Wireless Network Test Report, the IP address will be listed within that report:
    On the control panel, press the Setup button ( ).
    Press the Right Arrow button ( ) to scroll to Network Setup , and then press the OK button.
    Press the OK button to select Print Network Settings .
    Press the Right Arrow button ( ) to scroll to Wireless Test Report , and then press the OK button. The Wireless Network Test Report prints.
    Now map a network driver by following the steps below:
    Click the Finder icon on your Mac.
    Click the Go menu.
    Click on Connect to Server.
    In the Server Address field enter “smb://ipaddress of the printer” and click on Connect.
    You will be prompted to enter the password. leave it as is and click on Connect.
    The Memory card will be mounted as a disk in the Finder.
    Shlomi

  • How to determine actual colors in a black and white photo?

    I'm not sure if I'm in the right section, but I'm wondering if it's possible to use an Adobe program to restore actual colors in a black and white photo? I don't want add color by imagining or guessing; I need to determine the real colors. This might not even be possible, but if it is, please tell me what I can use.
    Thank you.

    That's where the artistry comes into play when they colorize old movies.
    A lady wears a nice dress:  is it greeen or purple?  It looks gray.
    A baby comes home from the hospital cute new baby clothes: pink or blue?  They look light gray.
    That's a nice school tie that guy's wearing: use the wrong colors on the stripes, and he's at a different school.  But they're nothing more than varying shades of gray.
    If there's one thing missing in a B&W photograph, it's any vestige of color information.   All you have is gray scale.   You may NEED to determine the real colors, but without a color photograph to use as a reference image, you're out of luck.

  • PSE 8: Color Tinting from Black and White Photo

    Basically, the title says it all.  Can someone tell me how to add areas of color in a black and white photo for PSE 8?
    I really appreciate it.

    Using Hue Saturation won't colorize my whole picture?  What if I just want to color a hat?  I mean, I know about hue/saturation and I know how to colorize.  But, how do you do it for something specific within that picture and leaving the rest black and white?
    Select what you want to colorize and then apply the colorization methods. You might want to first feather the selection 1 or 2 px to get a soft edge. As to Barbara's first method (painting on a blank layer with Color blend mode), the color tends to be washed out. If you want a deeper color, duplicate the layer and set its blend mode to Multiply; if the result is too dark then lower the duplicate layer's Opacity.

  • How can I color a black and white imported jpeg?

    I am new to Illustrator, and have been watching MANY videos, but just cannot seem to figure out how to color the B&W photo I imported into Illustrator CC. Do I need to do something in Photoshop first? Am I missing a step? I was able to trace the image but from there I am lost. Any suggestions are greatly appreciated!

    How can I color a black and white imported jpeg?
    In case you don't want to trace it first:
    -> it needs to real Greyscale. Not just desaturated RGB
    -> Do not save it via Save for Web in Photoshop.

  • Black and white photo with color

    how do I leave color in a black and white photo ?

    There are several ways, here is one:
    Open picture file
    Duplicate the background layer
    On the background copy layer, remove the color (Enhance>convert to black and white)
    Apply a mask to the background copy layer
    Paint with a black brush where you want to reveal the color. If you go too far, correct with a white brush.

  • Adding color to a black and white photo

    I've searched everywhere on here and on Youtube and can't seem to find how I can add color to a black and white photo using Aperture 3 that was taken in black and white.

    Hi, and welcome to the list. Make sure you read the [Help & Terms of Use|http://discussions.apple.com/help.jspa] section when you get a chance.
    It's not a good idea to insert a new question into someone else's post. First as you are not the originator of the post you can not assign solved or helpful ratings to any answers you get here. And the forum really relies on those to help other users locate meaningful responses.
    Secondly your question is less likely to get answered. readers of the post will be looking to either give advice on the original question or else be looking for answers to the question. A new question stuck in between the other replies is less likely to be noticed. It's always best to start a new thread and if something in another post applies you can always link to it.
    Now to your question. There was a great solution given to your very problem back a little while ago, see: [Topic : Black, white, and color?|http://discussions.apple.com/thread.jspa?messageID=12805425&#12805425]
    (see how I worked that last bit of advice into this post )

Maybe you are looking for