Why did HandBrake only copy part of DVD? It shows chapter 1-17 but only got 17 sec. ?
It shows chapter 1-17 but only got 17 sec.? I downloaded newest versions of HandBrake and vlc 64 bit. I went through the copying process twice and when I opened the movie I only got 17 sec and a still picture - different one each time. It took and hour or more to copy each time. What else can I do?
You have to select the chapter on the DVD which represents the entire video you want to encode.
If the video is made up of 17 seperate chapters, you have to select each chapter individually and add each one to the Queue. Once all 17 are in the queue, click start and the 17 chapters will be encoded into 17 seperate files.
What version of VLC player did you get? If it was version 2, you may need the additional vlc library. Just do a search and the result is readily available
Similar Messages
-
Why did I only receive 1 minute of a 5 minute song?
Why did I only dowload 1 minute of a 5 minute song?
If your country's iTunes Store allows you to redownload purchased tracks, I'd delete your current copy of the track and try redownloading a fresh one. See the following document for instructions:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
Otherwise, I'd report the problem to the iTunes Store.
Log in to the Store. Click on "Account" in your Quick Links. When you're in your Account information screen, go down to Purchase History and click "See all".
Find the item that is not playing properly. If you can't see "Report a Problem" next to the item, click the "Report a problem" button. Now click the "Report a Problem" link next to the item. -
Why did Apple get rid of the DVD slot in the MacBook Pro
Why did Apple get rid of the DVD slot in the MacBook Pro?
Because relatively few people used it and Apple wanted to decrease the size/price of the computers.
(125274) -
Why does my router disconnect every time I sleep the computer? Why did this only start to happen recently?
Actually it does with Ethernet too: http://support.apple.com/kb/HT2412?viewlocale=en_US&locale=en_US
What happens when the Mac goes to sleep (not just into idle mode or display sleep)?
On all Macs:
The microprocessor goes into a low-power mode
Video output is turned off, and a connected display may turn off or enter its own idle state
Apple-supplied hard disks spin down; third-party hard disks may spin down
On portable Macs:
The Ethernet port turns off, if applicable (see note below)
Expansion card slots turn off
The built-in modem, if present, turns off (see note below)
An AirPort card, if present, turns off (see note below)
The USB ports only responds to the power key on an external keyboard (see below)
The optical media drive, if present, spins down
Audio input and output turns off
Keyboard illumination, if a feature of your portable computer, turns off
But see the note about selecting, "Wake For Network Access" in Energy Saver preferences.
Note: Portable computers have no network connectivity when in sleep mode, but can wake if the Energy Saver option "Wake for network access" is enabled. If you wish to use file sharing or don't want to interrupt your Internet connection, you should not manually put the computer to sleep, and you should drag the "Computer sleep" slider to Never. -
Why is the LaCie copy silent on DVD player?
Friends,
After several frustrating hours (LaCie's readme only tells me how to connect to LaCie's readme--it should say, "if you are reading this don't bother to read this.") I finally burned a DVD. It was made from a videocam film that we had copied to a DVD. The sound was very bad, but as it was a souvenir film we want the sound.
On my computer, all works well but when played it on the television the video plays but it is silent. Did I miss something in the Burning Process?
I was so proud, but now I'm lost again.
PatriciaIs the DVD player built into the TV? or is it an
external DVD video player? or are you using your iMac
to send the video to the TV?
Thanks, Dwayne--you pointed me away from the iMac and LaCie and I found that the DVD player was not properly connected to the TV.
Solved -
DVD player shows gray screen, audio but no video
DVD's play fine in VLC but with the default DVD player I only get a grey screen.
Odd. I have Vista Ultimate SP2 64 bit and the exact same cam. It finds it with no problem. Have you downloaded and reinstalled the Vista drivers? http://www.logitech.com/en-us/support/hd-pro-webcam-c920?osid=13&softwareid=10505§ion= downloads&crid=405
-
Why did I loose all photos in DVD project and see only broken chain symbol?
I opened my DVD project to see only broken chain symbols where previously I had thumbnail photo images. My previous work to nearly finish this project was gone! Then, today, I opened another DVD project, a larger one, that I'd worked on also this week, and found the same thing had happened to it! I have no idea what happened. Help!
Additional details: This is getting worse. Today, I see that ALL my existing DVD projects have lost photos and have only CHAINS. I get this message: "Assets have been found in your project which have been modified externally since this project was used the last time". Do you want to automatically update your project? To which lately I am answering- Cancel. Previously, in one case, I answered, "Update." WWWV
I can see this is very bad news, but I still don't know what happened. -
It seems only read 200 samples and then stop. Shouldn't I get a continuous wave chart after using shift register on a while loop?
Solved!
Go to Solution.
Attachments:
trial 4.vi 21 KBYou must remove Start VI out from the loop...
You cannot 'Start' a task which is already running...
You also remove the Start VI completely from your code... If you do not use Start VI, a measurement task starts automatically when the DAQmx Read VI runs.
Find the attached VI.
I am not allergic to Kudos, in fact I love Kudos.
Make your LabVIEW experience more CONVENIENT.
Attachments:
trial 4 [with START-VI removed].vi 15 KB -
Why did C100V only flag 2 of 40 spam messages to spam quarantine?
CIO received about 40 emails from the same sender "[email protected]" Subject: new editor. The messages were sent between 1:32 am and 6:19 am EST Sunday 4/26/2015. Every email looks exactly the same. After he received about 6 messages, the ironport flagged two as spam. After that he received about 30 more messages. Searching on the sender looks like he was the only recipient of this spam so that's good.
We are curious why some were blocked but the vast majority made it through. What is the best course of action to mark them as spam without having to chase a never ending battle of blocking the email address?
I will also try to open a TAC case with Cisco as the appliance did not function properly as it should, but I'm also interested in hearing other real world user's opinions as well.I've seen CASE get the idea half-way through a spam run, but not to admit spams after it had canned some. Have you been into the headers to check the SBRS ratings of the actual sending servers? The spams might all appear the same but I'm betting different sources of origin.
-
I recently converted some VHS tapes to DVD. I would like to take parts of different DVDs and put them on new ones for different family members. Can I do this?
yes but you may take a slight quality hit.
http://www.dvdxdv.com/ -
Why did photostream only sync 50 out of 170 photos to my new iphone?
I purchased a new iphone 4s and turned on photostream. Only 50 of my photos synced to the new device. I've tried plugging my phone in to charge and syncing icloud when connected to wifi and...nothing. I have multiple pictures of my newborn son that I want to keep with me, but they won't sync to my phone.
Any suggestions?
Thnx.Where are the photos being synced from?
Remember that photo stream only stores photos from a device (with camera, like iphone) after photo stream has been turned on - it won't take on old photos. If the photos are currently on your computer (where copies should be), copy the photos you want to the photo stream album (on a mac, use iphoto). Photo stream only keeps photos for 30 days (a max of 1000 photos).
Additional advice:
You should be importing all pics taken with the iphone to your computer regularly as you would with any digital camera. This is covered in the manual.
iOS: Importing personal photos and videos from iOS devices to your computer -
i just bought an 8g nano but i loaded 725 songs just straight music no videos no pictures and it says its full i know its says i should be able to fit up to 2000 songs 725 is no where near that my 4g has 800 on it is there something i'm doing wrong or something i need to do i just dont get it and i've tried it a few times with the same results!!! Its getting very frustrating!!!!! thanks
If your songs are longer than 4 minutes on average or encoded at a bitrate higher than 128Kbps, fewer than 2000 will fit on the iPod.
(65398) -
Problems with burning a copy of a dvd pro show gold
I made a slide show dvd and I can't figure out how to make a copy so that my dvd player will work.. I get it burned but my dvd player says it cannot play it.
???why can't I make an exact copy?? no play..
I used the cd/dvd header for burning.. it does not work. -
I bought an album from itunes and one of the songs did not download completely. It shows in the player that it is 3:17 but only plays for 40 secs. How can i get the entire song back?
I'd report the problem to the iTunes Store.
Log in to the Store. Click on "Account" in your Quick Links. When you're in your Account information screen, go down to Purchase History and click "See all".
Find the item that is not playing properly. If you can't see "Report a Problem" next to the entry, click the "Report a problem" button. Now click the "Report a Problem" link next to the item.
(Not entirely sure what happens after you click that link, but fingers crossed it should be relatively straightforward.) -
Why did the RSS indicator in 'top sites' stop showing?
Since upgrading to Safari 4, top sites has been amazing. I particularly like how each top site has it's own RSS indicator to display when new content is on that particular website. However, in the past few weeks these have completely dissapeared.
Does anyone know why that may have happened, and how to get them back?
Thanks.From your Safari menu bar click Safari / Reset Safari. Select the top 7 buttons, click Reset.
Quit then relaunch Safari. See if that helps.
Empty your Safari cache more often.
Maybe you are looking for
-
Something is wrong with your Unlocator setup.
when i go into " CBC.CA an error comes up saying "something is wrong with your unlocator setup " i dont what to do or how to fix it
-
my phone stop working. need help
-
Yes I know that for some stupid reason Apple have moved adding chapters to Garage Band, makes absolute complete sense to do this when trying to make movies.....but having put up with this I find that Garage Band has moved my sound from the iMovie and
-
Remove Excess Open With Contextual Submenu Choices
The subject says it all. Lately I'm getting three and four indentical choices to open files with when I right click on the file. Some are exe choices, and others, as I've said, have the same app listed four times. How do I remove the excess ones? Tha
-
Why do I get other software when I update?
when the update box opens, I click where indicated and as the update is downloaded I get other software downloaded also. It is things like 7/24 help, PC fix, dialasearch engine. Things that I don't want.