Why did I see many airport and time capsule devices in iPhones AirPort Utility?

I had this problem with my Airport utility that I saw three devices(an AirPort Express and Time Capsule and my own AiPort Express) in my airport utility for iPhone. Were they connected to my wifi network which was created by my own AirPort Express? There were two devices that I think shouldn't have been there. I changed my AirPort Express from bridge mode to DHCP and NAT. Those two other devices disappeared. Could other people somehow have used my wifi network and extended it? It was password protected.

Similar Messages

How do I connect Airport Extreme and Time Capsule to my new iMac so that AE is used for network and TC only used for Time Machine backup?

I didn't realize that Time Capsule will only support the print function of a wireless multifunction printer. So I want to use Extreme for my network to have full use of my printer and use TC as the Time machine backup only. How to I make the connections?

Thanks for your response and this is getting complicated but I just purchased a new iMac as well as the Airport TC. I've had the Airport Extreme for a year or so. The Airport Extreme worked perfectly with my old iMac wirelessly and I had all functions of my printer with no problems. I was expecting the same with the TC. But the instruction that came with TC say to connect the printer to the TC via USB...which I did. And the print function worked perfectly but nothing else. In researching I discovered that when wired that way the TC only supports the print function...not scan or fax or anything else. I tried going wireless since my AE worked perfectly via wireless but I got no printer functions at all that way. But I'm wondering also if I tried that during a time I was having other issues...I had to delete and re-add my printer which solved some other problems. I may try that again...and see if I can get all print functions with just the TC connected
As far as connecting both your AirPort Extreme and Time Capsule on your network, we're not clear on exactly how you want to do this. Will the AirPort Extreme connect to your modem using an Ethernet cable and the Time Capsule connect to the AirPort Extreme using an Ethernet cable?.......or......do you want the Time Capsule to connect to the network using wireless?
Well... first of all I would like not to have to use the AE at all...I would prefer using just my TC for network, all print functions and Time Machine backup if that's possible. My printer will not accept Ethernet connections (Canon MX512).
After failing at getting this to work, I decided I would try to use my AE for net and print functions and just use my TC for Time Machine backup. I tried several different connection configurations with no success until finally I connected cable modem to my AE via Ethernet and went wireless with the AE and printer. but connected the AE to the TC via Ethernet and amazingly everything worked like a charm (for a while) and I was patting myself on the back for being so smart. But now I find that the connection only lasts for a short time. If I leave it for a while the TC goes invisible...or at least I see a message saying the Ethernet is unplugged...but it is not... and I lose internet connection even though I have a green light on my AE. So now I'm at a loss. I don't know why I keep losing network signal and why my system thinks the Ethernet is unplugged.
So... after all this...I figured I wasn't so smart after all and I must have things wired incorrectly.
So... it sounds like you are saying I should go back and try again to get my new TC to work as I want it to via wireless instead of connecting via USB...is that correct? Could you tell me exactly how I should wire my equipment from cable modem to AE and/or TC to achieve net capability, full functions of my printer and Time Machine backup...
Thanks...

Extending wifi with airport express and time capsule

Hi All
I'm new to macs and moving over in a big way!
I started with a time capsule and all was fine apart from the coverage in the house.
It seemed easy to extend the wifi so purchased an AE 802.11n and extended the network.
It does extend and I can connect to the internet but the network is now really really slow and the time capsule backup wont work.
connection is :
Ethernet modem - Airport express ( as its close to my audio equipment ) - extended WIFI conection via 802.11n.
Any suggestions? why is it so slow?
Im at 7.3.1 firmware on both AE and time capsule and the Macbook pro is at 10.5.3.
Any suggestions?

I've managed to change the 5gHz of ther Airport Express that's extending the network.
As mentioned, main AE is on channel 48, and I now have the 2nd AE on channel 36 - which means my TV can now see the network. Also tested speed via my mavbook air on the same 5gHz network as it all seems OK (A while ago I spotted my Time Capsule was on the same channel 48 as main AE and throughput was abysmal! Bad enough to make me reset the TC to factory defaults and setup again - which is when the TC got channel 120).
Anyway, the fix... I changed the 2nd AE to create a wireless network (instead of extend), and manually set the channel to 36. I then set it back to extend, and it seems to have kept channel 36.

Why are there so many apps and wearable tech out there that specifically focuses on losing weight?

I'm under weight and would really like to see some apps for people like me who want to gain about 30 lbs!

Why are there so many apps and wearable tech out there that specifically focuses on losing weight?
Because there's a 35x bigger market for it.
Percent of adults age 20 years and over who are overweight, including obesity: 69.2% (2009-2010) - http://www.cdc.gov/nchs/fastats/overwt.htm
...an estimated 1.7% of U.S. adults aged 20 and over are underweight - http://www.cdc.gov/nchs/data/hestat/underweight_adult_07_10/underweight_adult_07 _10.htm
I suggest you type
weight gain app osx
into a search engine. I did and one came up on the top line (no idea if it is any good, you have to determine that yourself).

My Airport Extreme and Time Capsule both cannot do not mount my Seagate USB external hard.

My Airport Extreme and Time Capsule both cannot do not mount my Seagate USB external hard.
I am running OS 10.7.5
Both the TC and AE are updated to 7.6.1
The Seagate drive in formatted: Journaled HFS+
I tried everything on Apple's Article: HT1331 and the basic reboots and restarts.
"Next"

It sounds like you may be confusing "mount" with "recognize".
Connect the drive to the USB port on the AirPort Extreme
Open Macintosh HD > Applications > Utilities > AirPort Utility
Click on the AirPort Extreme icon, then click Edit
Click the Disks tab
Does the AirPort Extreme "recognize" your hard drive? If yes, it will be displayed in the window.
See example below of a WD 500 GB drive connected to the AirPort Extreme.
If your drive is formatted HFS+ and it does not appear here, then you will almost certainly need to use a powered USB hub with the hard drive.....even if the hard drive has its own power supply. The USB port on the AirPort Extreme and Time Capsule is under powered.
Post back when the drive is "recognized" and we will next "mount" the drive.....although you likely already know how to do this.

How can i see the date and time of iPhone pictures, How can i see the date and time of iPhone pictures

I would Like to know where i can see the date AND time on a picture i take With My iPhone? AND if not on the phone automaticly,.. Why not?... If even the cheapest phones provide this BASIC info.

You can get this info if you have iPhoto for your phone (costs $5) - you can also try out the app I made (free) https://itunes.apple.com/us/app/photo-date/id605218393?ls=1&mt=8 Would love to know what you think!

Why did Adobe see fit to eliminate, "Print Without Color Mangement"?

Why did Adobe see fit to eliminate, "Print Without Color Mangement", and when are they going to restore it? None of their workarounds is really adequate when printing through a rip. Prior to CS5 it was all so simple. Now, I keep CS4 onboard just for printing. Is there actually a good rationale for the elimination of such a useful function?

Adobe was forced to remove the NCA mode because the current OS X Mac print pipeline and print drivers quit supporting it. Photoshop CS5 & 6 and LR 3 & 4 can't send unmanaged data to the Mac pipeline; it'es either application managed color or printer managed color and iehter case, the data gets modified by the pipeline–which means the current apps can't send data with NCM.
The printer utility can do a workaround to do so.
Note, this isn't yet an issue on Windows but for cross platform uniformity, it was removed there as well. So, if you want to yell at somebody, go yell at Apple...
And no, it ain't coming back...

Do Airport Extreem and Time Capsule support connect restrictions?

I've looked over the manuals for Airport Extreem and Time Capsule and can't see if (or how) these devices support connect restrictions such as:
1) Prevent certain devices from connecting (i.e. via MAC address)
2) Allow/Prevent access at specific times of the day.
Do these devices provide these types of services?
Thanks
-Mike

1) Prevent certain devices from connecting (i.e. via MAC address)
Yes, but only for wireless devices.
2) Allow/Prevent access at specific times of the day.
Yes, but only for wireless devices. You can set up rules for each day of the week if you want. The example below shows Weekdays and Weekends

Cisco router RVS4000 with Airport extrem and Time capsule.

Problem droping connection to internet when is Time capsule in extended wifi mode. When I turn off wifi on time capsule Airport extreme work fine.
Airport extreme and Time capsule is conected via ETH.
Any idea ?
Thaks
B.

If you use ethernet to connect the AE and TC .. you must NOT extend wifi.. you use Create a wireless network. And setup with same name and security. You are using roaming network.. not extended wireless.. if you want to use extended wireless no ethernet
see http://support.apple.com/kb/HT4260

AirPort Extreme and Time Capsule dumb port placement

Ok so I have a few of the new Airports and Time Capsules, the stacking arrangement on the Ethernet ports is just about the dumbest thing I have seen in a long time. For a company that prides itself in user experience design and engineering, you lost it on this one.
The ports are maybe a centimeter apart which makes in near impossible, unless you are an infant or use a tool, to disconnect the cables of any of the other ports except the top one. So for example if I have to disconnect bottom port, I either have to get a stick or a pencil or find an infant that has the dexterity needed (and the appropriate working papers) to disconnect the lower ports or I have to disconnect the top, then the middle then the bottom port.
So dumb....
Next there are no lights on the front that give the status of the ports. Maybe there is a big trend moving away from this but it would be AWESOME in my book if you had port status lights on the front.
Lastly the **** box! OK next time make the bottom of the box the "next" and the top large portion of the box fit inside it. Ever try and get the box apart after you have removed the device and put the box back together. I swear to god there is a cat in there and I can't tell if it is dead or alive and I can't get the box open to see.
Lastly *** is with that app? It was better in the previous version, maybe 5.n?

Not sure if you are aware that this is a user to user to support forum.
Apple is not here, and they will not see your comments.
If you want to provide feedback to Apple, you can do so here:
Apple - Time Capsule - Feedback

Conflicts with Airport Express and Time Capsule

I am using Airport Express and Time Capsule at the same time. Connection to the web is via a router. Very often I do have conflicts. How shall I connect the gadgets? At the moment I connect the router to Airport Express (network cable).
Time machine back up doesn't work properly.
Is there anybody able to help me?
Regards

What broadband type do you have?
It can be impossible to plug a TC into the existing connection because the virgin media router has special setup or logins which are not revealed to end users.
If it is a fibre connection for instance the TC may simply not work. They have issues with many fibre ISP putting the gateway address outside the subnet of the main public IP.. (don't worry if it is too technical .. it amounts to .. it don't work! )
You may need to wait until Sat.
Get in a big supply of home videos or something and try and starve off your addiction.

HT1382 how can I restore my back up files from my laptop? i want to see the dates and time that I backed up my files. is it posssible?

how can I restore my back up files from my laptop? i want to see the dates and time that I backed up my files. is it posssible?

What backed up files?
Available backups for an iOS device can be found in Edit > Preferences > Devices.

Best way to extend wireless via airport express and time capsule

best way to extend wireless via airport express and time capsule
i live in a two storey house where i use my airport express to create a wireless network in the main floor, and time capsule to extend it in the upper floor, where my room is. i have like 16 mbps in the main floor, and 2-3 mbps in the upper floor after having speediest.
i used time capsule in the upper floor because i use wireless backup daily and don't want to put internet down while i im doin it and consequently my parent can have internet access in the main floor, am i right? or do i have make just the opposite in order to have a good internet speed?
secondly, while checking airport express wireless mode on airport utility, there is like 4 different type of radio mode(802 11n bg comp, 802 11n 2.4, 802 11n a comp, 802 11n 5ghz) which i have no idea what they mean
what do you recommend?
we have like iphone4, iphone 3g, mbookpro, ipad, ipad 2, samsung tv and a sony vaio laptop in the wireless network
thank you

What you have would appear to be working but I can comment how I would redefine your setup. Note that both Airport Express and Time Capsule can function as wireless base stations so you do have wireless everywhere and at all times — using the Time Capsules for backups doesn’t mean your parents won’t have internet access regardless of the where the base stations are located.
You appear to have devices to connect to your network that use the 2.4 GHz band with 802.11g such as the iPhone 3G and perhaps the 5 GHz band with 802.11n such as likely the Macbook Pro if it’s a recent model. The iPhone 4 can use 5 GHz and 802.11n. Can’t comment on the Sony and Samsung but you can check their specs.
Now the Time Capsule (if it’s a recent version), can simultaneously supply 2.4 GHz and 5 GHz band signals, but the Airport Express (if it’s recent) can only use one of those bands at one time. Likely the lowest common denominator for your devices is going to be the 2.4 GHz band since the devices that are capable of using 5 GHZ also support 2.4 GHz. If you don’t use 5 GHz, you won’t lose much in a two-storey home because likely it’s the 2.4 GHz band is better signal anyway because 5 GHz signals drop off quickly with several walls/floors to penetrate.
You also didn’t mention if the Airport Express is used to support a printer and/or AirPlay (using iTunes to play on remote speakers via the Airport Express connection) but that might also be a factor in the best location to place the Airport Express. Although the printer could be switched between the Time Capsule and the Airport Express if needed, only the Airport Express will support your remote speakers.
Recommend you use the Time Capsule as the Base station. When using Airport Utility to define the network, after you name your network, etc., select the Wireless tab, check the box “Allow this network to be extended” and set the Radio Mode to "802.11n (802.11b/g compatible)”.
Using the Airport Utility, click on the Airport Express; after you define the device and network name, select the Wireless tab, define the Wireless Mode as “Extend a Wireless Network” and check the box “Allow wireless clients”.
Hope that helps.

Why did Apple remove many of my songs from the cloud?

Why did Apple remove many of my songs from the cloud?

Maybe they don't have the same taste in music as you
Apple don't make or 'own' songs - other companies allow Apple to sell them. Sometimes these rights owners remove the songs from the store. Apple can't do much about that. You should make backups of any purchases, since Apple cannot guarantee they will be available in future.

Why did my library duplicate itself and how do I remove it?

Why did my library duplicate itself and how do i remove them?

An iTunes manual? It is supposed to be so intuitive you don't need a manual.
http://www.apple.com/itunes/how-to/
Most people don't have issues, but most people posting here do, obviously, why else would they come?
With regards to the way iTunes works (when it is working as it is supposed to) if you use the software the way the designers expected you to it all works out OK. The problems start with those of us who think things should work slightly differently and get then confused with the results. At that point you either have to learn to work the way the program expects you to, or work around it. I encourage people to do work with it, as is easier, but in practice I write scripts to enforce my will on iTunes.
tt2

Why did I see many airport and time capsule devices in iPhones AirPort Utility?

Similar Messages

Maybe you are looking for