Why did my Bluetooth stop working after upgrading to 10.8?

Now I get "Bluetooth: Not Available" when I click on the Bluetooth icon. According to my USB Device tree, however, I have this device connected:
Bluetooth USB Host Controller:
Product ID:    0x8215
Vendor ID:    0x05ac (Apple Inc.)
Version:     1.80
Serial Number:    002500C1B048
Speed:    Up to 12 Mb/sec
Manufacturer:    Apple Inc.
Location ID:    0x5a110000 / 5
Current Available (mA):    500
Current Required (mA):    0
Plugging in an alternate Bluetooth adapter (branded ASUS, but a "Broadcom BCM2046B1" in the USB Device tree) allows me to connect to Bluetooth devices. Disconnect that, and Bluetooth goes away again.

Similar Messages

Why did my mouse stop scrolling after upgrading to mavericks?

I have completely lost all ability to scroll with my Apple Magic Mouse after upgrading to Mavericks.   Why did this happen?   How can it be fixed?    It worked fine with Snow Leopard and Mountain Lion.

Everyone:
I was able to solve my own problem, after scouring the Internet looking for solutions. Sadly, the Apple Support Community was of no help.
Here's the full story:
I originally had purchased my iMac with Snow Leopard installed.   I loved it just the way it was, and really did not ever want to upgrade. However, I've been around computers long enough to know that I would HAVE to do it someday, only because of the age old problem of wanting to run some new application in the future, but not being able to, becasue the app would only run on the latest version of OS X. I reluctantly upgraded to Mountain Lion less than a year ago, without too many problems -- nothing I wasn't able to fix fairly easily anyway. When Mavericks came out, with the "offer I could not refuse" price of FREE, I knew I would eventually have to install it.
So the day comes when I'm finally ready to install Mavericks. To get ready for that day, I did the following:
I ran CCleaner on Mountain Lion to clear out any old files accumulated. (No longer works in Mavericks)
Made sure my Time Machine backup was up to date
Cleared out gigbytes of old files off my hard drive, and archived them on an external USB drive
Made sure every single app on my iMac was fully upgraded.
Made sure Mountain Lion itself was fully upgraded!
I then set aside a full day for the upgrade, knowing full well how long it could take, even with a very fast internet connection. Eventually I worked up the courage to go to the App Store, and proceded to download Mavericks.
The update seemed to go smoothly enough, no problems that I noticed. So I finally get to the point where I can sign on to my iMac again, opened up the Chrome browser, and found out that my mouse was was unable to scroll. I then opened up Firefox and Safari, and found that I could not scroll pages on those browsers either. As a matter of fact, I couldn't scroll using my mouse no matter what app I tried. That feature was completely lost.
I went to ' System Preferences --> Mouse ' to look at the settings, and only the most basic settings were available: click and speed, nothing at all for scrolling or swiping.   That's not good....
Looking to see if anything else was missing in System Preferences, I saw that there was no option for Blue Tooth at all. As a matter of fact, Blue Tooth was completely inoperative, and there was literally nothing I could do to make it work. The Mavericks upgrade had completely trashed Blue Tooth on my iMac. I have no idea how my wireless keyboard and Magic Mouse were even operational, Apple must have some sort of "back door" that keeps those two connected even when the entire Blue Tooth subsystem is off-line.
Since there was absolutely no way to fix this, given the damage done by the Mavericks upgrade, my only choice was to do a complete re-install of Mavericks. I did this by turning off my iMac, and then after turning it back on, I held down the command + R keys to initiate the "recovery" of my iMac, and re-installed Mavericks. There are screens the are displayed that walk you through the process, which is fairly easy and strait-forward.
This above process is a feature called OS X Recovery, and it has been present since Lion. Here's a link to an article that explains it more fully:
OS X: About OS X Recovery
http://support.apple.com/kb/ht4718
I did not know about this feature, but found out about it after doing various web searches in an effort to find a solution to my problem.
So, I basically ended up installing Mavericks a second time. This took hours to accomplish, but it worked.   After the second installation, I signed on, and sure enough, Blue Tooth was back in operation, and my Magic Mouse worked without any problems what so ever. I had full scrolling ability in all my apps.
So OS X Recovery saved the day, at least for me.
I should note that before doing the Mavericks upgrade on my iMac, I had already performed the upgrade on a family member's MacBook, without any problems encountered at all.   They were still running Snow Leopard, the orignal OS that came with their MacBook! Like me they were reluctant to upgrade, but eventually it becomes a necessary evil.
Here's hoping that this information may be of use to someone in the future.
Northwest Line
14 FEB 2014

Why has my licensing stopped working after upgrade to ios Yosemite

after upgrade to IOS Yosemite, licensing for PSE has stopped working. error code 150:30. Any ideas what I should do

Hello Jarcel,
If you are not able to access the cellular network on your iPad, I recommend reviewing the steps in this article:
iPad (Wi-Fi + Cellular Models): Troubleshooting a cellular data connection
http://support.apple.com/kb/TS4249
Thank you for using Apple Support Communities.
Best,
Sheila M.

Why did my mouse stop working after a upgrade to Yosemite?

I've looked in the help sections and it appears the option to check scrolling is no longer listed on the option for mouse under accesability. Anyone know a fix for this?
Thanks,
Mike

I've looked in the help sections and it appears the option to check scrolling is no longer listed on the option for mouse under accesability. Anyone know a fix for this?
Thanks,
Mike

Why did Firefox suddenly stop working after an update?

I installed the most recent Firefox update and it now refuses to work. The message I get is: Firefox cannot be opened because of a problem. Check with the developer to make sure Firefox works with this version of Mac OS X.........
I installed the most recent update for OS X. According to Mozilla, it should run on the version I have; 10.6.4
I tried opening the system profiler and it won't even do that. Help!

Mac OS X 10.4 and later - [http://www.mozilla.com/en-US/firefox/system-requirements.html OK].
1) Please take a screenshot of the issue and attach the image to your post.
2) Please explain how you tried to start the profile manager (see also [[Managing profiles]]).

Why does the ipad 2 speaker stopped working after upgrading to ios 8

WWhy does the iPad 2 speaker stopped working after upgrading to ios 8 why plz respond

Hi A_S85,
It appears your iPhone has an issue relating to sound. The following article may help you find a solution:
If you hear no sound or distorted sound from your iPhone, iPad, or iPod touch speaker - Apple Support
Can't hear anything from the built-in speaker of your iPhone, iPad, or iPod touch? Maybe you can hear, but the sound is distorted, muffled, intermittent. Or maybe you hear static or crackling noises. If your iOS device has any of these issues, follow these steps.
Follow these steps and test the sound after each one.
Go to Settings > Sounds and drag the Ringer And Alerts slider to turn the volume up.
If you can hear sound from the speaker, then the speaker works. Continue with these steps to find the setting or switch that's affecting the sound. If you can't hear sound from the speaker, contact Apple Support.
Make sure the Ring/Silent switch is set to ring. If you can see orange, it's set to silent.
Restart your device.
Open an app that has music or sound effects. Adjust the volume with the volume buttons or the slider in Control Center.
Go to Settings > Bluetooth and turn off Bluetooth.
If there's still no sound, connect a headset. If you can hear sound through the headset, remove it and clear any dust or debris from the headset jack of your device.
If the device is in a case, make sure that the case doesn't block the speaker.
Use a brush to gently clear any debris from the speaker and Lightning connector (or 30-pin dock connector). The brush should be clean and dry and have soft bristles.
Update your device to the latest version of iOS.
If you followed these steps and still hear no sound or distorted sound, contact Apple Support.
Thank you for contributing to Apple Support Communities.
Take care,
Bobby_D

Why does my cable selfie stick stop working after upgrading to iOS8.2?!

I have an iPhone 6. My cable selfie stick stopped working after upgrading to iOS8.2.
My friend's iPhone 6 is still iOS8.1, and the seflie stick works fine for him!
How do I solve this?

Are you using the paintbrush and have a gradient assigned to a stroke in CS6?
Double click on paintbrush, and enable keep selected.
If not give us a better explanation of what tool & settings you are using. (eg: blob brush, shape builder)

After upgrading my iphone 4s software to 6.1.2, the sounds have stopped working, After upgrading my iphone 4s software to 6.1.2, the sounds have stopped working!

After upgrading my iphone 4s software to 6.1.2, the sounds have stopped working, After upgrading my iphone 4s software to 6.1.2, the sounds have stopped working? Can it be recovered or a Hardware has to be replaced. I tried restoring my phone, but it did not work. Any solutions?

alisportshots wrote:
I have a similar problem, but after following your suggestion of deleting my iphone backup and then turning backup back on again, I needed to plug my phone into my computer to sync the backup. I re-tried to do an icloud backup and it again told me that "the last backup could not be completed"... since I had deleted the backup, it says the "Last backup: never". Ugh. I reconnected my iPhone 4S to my computer and iTunes so I could sync my phone and do a backup... it's still "waiting for sync to start"...
For your iCloud backup, you may have an app that is preventing the backup from succeeding. To locate which one, go to Settings>iCloud>Storage & Backup>Manage Storage, tap the name of your device under Backups, under Backup Options tap Show All Apps, then turn them all to Off (including camera roll) and try backing up again. If it succeeds, then the camera roll and/or one of your apps is preventing the backup and you'll have to located by process of elimination. Turn the camera roll On and try backing up again. If it succeeds, turn some of your apps to On and try backing up again. If it succeeds again, turn some more apps to On then try again; repeat this process until it fails. Eventually you'll be able to locate the problem app and exclude it from your backup.
If you turned iCloud backup off and try to sync to create a backup on your computer and got a "waiting for sync to start" error, it may be caused by a corrupt backup on your computer. You could try deleting your last backup by opeing iTunes and going to Preferences>Devices, clicking on your last backup and clicking Delete Backup. Then try again.

Kodak ESP 3200 stopped working after upgrading to Yosemite

Kodak ESP 3200 stopped working after upgrading to Yosemite

Kodak has posted an unsupported hack that has been reported to enable printing to a Kodak printer not supported in OS X 10.10 ("Yosemite"). Perhaps it would have the same effect with some other kinds of printers that aren't supported in Yosemite. I have no information about that, one way or the other.
I have not tested the hack myself and I don't know all the possible effects. As far as I know it will not break the compatibility of printing software that is already compatible with Yosemite. It may degrade the security of the web administration interface of CUPS. That interface is not enabled by default, and will not be enabled by the procedure described here. Even if it were enabled, I know of no way it could be exploited, with or without the modification. Nevertheless, if you have enabled the web administration interface, you should disable it if you decide to follow these instructions. If you don't know what the web administration interface is, you haven't enabled it.

My Microsoft Office 2004 stopped working after upgrading to MT. How can I get it to work, or, how can I uninstall MT?

My Microsoft Office 2004 stopped working after upgrading to Mountain Lion. How can I get it to work again, or, how can I uninstall MT?

Office 2004 Applications Won't Work in Lion
You must have Office 2004 which is a PPC-only suite and will not work in Lion. You need to upgrade to Office 2011 - Mactopia - or you can try the freeware suite, Libre Office, that is functionally similar to Office 2007 for Windows except it works on Lion.
You may want to consider as well:
These two suites are similar to Libre Office but not as current or as well-supported:
NeoOffice
Open Office
And, then there is Apple's iWork suite:
Pages - word processing and layout
Keynote - presentation
Numbers - spreadsheet
Each can open and save Office compatible files. They may be purchased separately via the Mac App Store for $19.99 each.
(Access to the Mac App Store requires Snow Leopard 10.6.6 or higher and an Apple ID.)

Macbook Pro optical drive stopped working after upgrading from Mac OS X 10.6 Snow Leopard to OS X Mavericks.

My Macbook Pro optical drive stopped working after upgrading from Mac OS X 10.6 Snow Leopard to OS X Mavericks.. I wonder what's the work around or troubleshooting to fix this. Thanks!

try and Reset the System Management Controller (SMC)

Windows media player stop working after upgraded from firefox 6.02 to Firefox 7.01 yesterday.

windows media player stop working after upgraded from Firefox 6.02 to Firefox 7.01 yesterday.
the plugin for win media player is already installed and working fine in FF 6.02 before upgrade. i have Google this issue without any result so far. so i reinstalled the old version 6.02, until fix is found.
anyone has the similar issue with Firefox 7.01 in Win 7 32 bit ?

The issue was not with FF 7.01. VLC player version 1.11.1 is conflicting with windows media player when FF 7.01 tries to play media files! Which was not happening before in FF 6.02.
VLC and plugin media player need to be uninstalled first, then uninstalled FF 6.02. Install FF 7.01 and then win plugin media player again.
Test media player at www.vdat.com/techsupport/windowstest.asp

Why CD audio reproduction stop working after about 20 minutes

Why CD audio reproduction stop working after about 20 minutes.
The energy saving options seem to be ok

Welcome to Apple Support Communities marimonf. We are sorry you are having problems with what sounds like you burning a CD. These documents may provide some useful information:
iTunes 12 for Mac: If you have trouble burning a disc
iTunes 12 for Mac: Burn settings
iTunes 12 for Mac: Create your own CDs and DVDs

Why did my notifications stop working?

why did my notifications stop working? it's been a few days

Have you tried the troubleshooting included here:
iOS: Understanding Notifications

My work e-mail stopped working after upgrading to 5 ios.

My work e-mail stopped working after upgrading to 5 ios, I get the message that the mail server is not responding. Verify that you have entered the correct account info in mail settings. the information is correct and worked until I updated.

That means you have to restore the device with iTunes now. So connect the iPad to your computer's iTunes and restore the iPad.
iTunes: Restoring iOS software

Why did my Bluetooth stop working after upgrading to 10.8?

Similar Messages

Maybe you are looking for