WHY DID MY IPOD NOT RESPOND TO MY TOUCH

I think the reason why I cant use my iPod and is unresponsive to touch is because I left the portrait and landscape lock on too long. I forgot to turn it off. Well anyways, does anyone know how to fix it? I mean, I can still click the turn off/on button, but I cant shut it down because it needs me to slide to shut down and it wont let me, no matter how hard I try. PLZ HELP ME!! ;(

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer                            
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
  Apple Retail Store - Genius Bar                              

Similar Messages

  • Why is my ipod not responding?

    Everytime I try to slide to unlock my itouch, it doesn't work.  please help me fix it.  thanks.

    Try:                                               
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable       
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

  • Why did my ipod beep and wont turn on again

    Why did my ipod beep and wont turn on again?

    Various reasone. To try to fix see:
    iOS: Not responding or does not turn on

  • Why did my ipod shut off and wont turn back on?

    i need some help. i dont know if it might of been skype. but i dont know? why did my ipod do this?

    Try the will not power on topic of:
    iPod touch: Hardware troubleshooting

  • HT4623 why my iphone are not responding after i update the latest ios? and the screen displaying itunes icon

    why my iphone are not responding after i update the latest ios? and the screen displaying itunes icon

    You are in Recovery Mode. Follow the instructions below to recover your iPad.
    1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
    2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
    If you cannot turn off the device using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the device turns off, release the Sleep/Wake and Home buttons.
    3. While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
    4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button.
    5. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
    Note: You need to be patient and repeat the above many times to recover your iPad. Data will be lost.

  • Why did the trace NOT show the other switches in between?

    I have a PC that is connected to a switch (A) in a network. Switch A has many switches in between and connects to another switch B. When I did a trace to the server, the last switch I see in the result is switch B. Also, when I checked to which port of switch B that the server was connected, It showed as Po1. When I did a show cdp neighbor for the interfaces for the interfaces involved inthe bundle, I get a switch and then another. Why did the trace NOT show the other switches in between? Why did I get an arp on Switch B? Could some one explain?

    It's hard to tell, but if you have L2 switches, the addresses on those L2 switches are for management purposes only and you won't see a response from a trace. The only time you'll see a response is when the packet is routed between devices and not switched. You'll get an arp request/response across a single vlan. If you have vlan 10 across 10 switches, all 10 switches will see an arp request because they're broadcasted throughout the whole vlan.
    HTH,
    John
    *** Please rate all useful posts ***

  • HT1338 why is my keyboard not responding accurately?

    Why is my keyboard not responding??

    Hello:
    Go to system preferences>Bluetooth.  Highlight the device.  If the sidebar to the right does not show detailed information, click on the little gear and select "show more info." Then click on the gear again and select "favorite."
    Barry

  • Why did my ipod receive a song separate from the album that was downloaded

    why did my ipod receive a  song separate fron the album that it was downloaded with?
    i copied a cd using itunes

    Dont have that problem but i have two tips:
    1 Other ipod/iphone apps: they are often the problem, i had an alarm clock and that blocked the whole ipod app, so check if other apps dont use songs to wake up or anything else..
    2 try to leave the ipod app trough the multitasking instead of pressing the home button?
    Greets mathieu

  • Why does my Ipod not synchronize all playlists? Some get synchronized, others don't. Yet there is enough space available.

    Why does my Ipod not synchronize all playlists? Some get synchronized, others don't. Yet there is enough available space.

    The S.I. prefix Giga is used to mean both 1000x1000x1000 and 1024x1024x1024. Computer software typically uses the second version, but using the first number makes the same number of bytes appear bigger when expressed as Gb, so is favoured by hard drive manufactures.
    80Gb10 = 74.3Gb2
    It's a bit like specifying a quantity in gallons without saying whether they are US or Imperial gallons - everybody gets the same volume but one number will be bigger than the other. I could offer you a tank with 10 Imperial gallons of fuel in it - but if I tell you it's 12 US gallons it sounds like you're getting more for your money.
    Once the total size of your library exceeds the capacity of your device all you need to do is create some size limited playlists to determine what goes on the device. Don't sync all movies, sync one or two that you plan to watch soon. Likewise with TV Shows. Limit podcasts to unplayed episodes and finally create a music subset. What worked for me for some time was a smart playlist called Steve's Tunes defined as Playlist is Music and Playlist is not Exclude where Exclude was regular playlist that I would manually add to until Steve's Tunes was small enough to fit. These days I run an iPhone and have a number of smart playlists with ? Gb of most played, ? Gb of highly rated, ? Gb of recently added, ? Gb of essentials, ? Gb of unplayed etc. Each time I sync I get slightly updated selection without having to put any extra effort in.
    tt2

  • Why does my ipod not complete playing any song?

    Why does my ipod not complete playing any song?

    Do they play OK in iTunes on the computer?
    How long to they play
    Try a reset. Nothing will be lost.
    Reset iPod touch:  Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.

  • My IPod Touch has a black screen.  When held in an angle u can see the slider to unlock it but it will not respond to my touch

    my ipod has a black screen.  When I hold it at an angle i can see the unlock bar and date/time.  It will not respond to my touch to unlock it.  Any ideas to what is wrong with it?

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    -  Make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar

  • Why is my iPod not recognized in iTunes?

    Why is my iPod not recognized in iTunes?

    What have you tried so far in terms of troubleshooting this issue?  Are you plugging the iPod into a high powered USB 2.0 port on the back of your PC? Have you tried a different USB cable?
    What happens if you try to reset the device with it still connected to the PC?
    How to reset iPod
    Has this iPod ever worked on this PC or is this the first time you have time you have tried connecting it?
    Have you carefully worked through each and every single suggestion in this Apple support document?
    iPod not recognized in 'My Computer' and in iTunes for Windows
    B-rock

  • Why did my contacts not  download to new iphone, everything else did?

    why did my contacts not download to my new iphone via itunes ? everything else did.  with my favorites only numbers transferred not names.

    For the Contacts (I'm waiting my new 5s) I'm using the free App "MyContactsBakup" (or MCBakup), it works just fine on my iPhone 4.
    It works for pics too I guess. It is reliable, it process and send a file attached to a mail with all your contacts (pics, etc.). You open the attachment from your iPhone and add all the contacts again.
    Easy and effective, I'm happy with this.

  • Why did my ipod touch screen turn black?, Why did my ipod touch screen turn black?

    Why did my iPod touch screen turn black

    See Here for  Frozen or unresponsive iPod touch
    Try this First... No Data will be Lost...
    Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
    Wait for the Apple logo to Appear...
    Usually takes about 15 - 20 Seconds... ( But can take Longer...)
    Release the Buttons...
    More Info here  >  https://discussions.apple.com/message/19521062

  • My music screen has frozen and will not respond to my touch

    my 32g iPod touch will not respond to my touch while i am in my music library.  i can navigate through my iPod and access my apps, calendar, etc., but as soon as i try to get into my music and browse through it, nothing.  it has done this before, but it usually "snaps out of it", and eventually begins to work properly.  i purchased this iPod brand new in march 2012, so in my opinion it should not be acting up.  anyone have any idea as to what is going on with it? 

    Try the standard fixes:
    - Reset. Nothing is lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Restore from backup
    - Restore to factory defaults/new iPod

Maybe you are looking for

  • CSS Comments in DW CS3

    rally like the new preset css configurations that DW3 provides and the css comments are nice as well. However, they bloats the code and many of the comments are not necessary unless you are a beginner. Does anyone know if there is a setting somewhere

  • Oracle Types in sql

    Hello All, I'm in oracle 11gR2 and have a   question about using oracle UDT in a sql. I have a procedure that takes in a TYPE like below. This utb_id is number(38). One of a query inside the procedure has issues and I need to test it. procedure RESEQ

  • Satellite M300 - Where can I buy a new keyboard?

    My keyboard was broken. Now I want to buy a new key board for this model to replacement but I can't find where to buy it. Please help me! This is the pictures of this model with black glossy keyboard. http://imall.ntu.edu.sg/pic/Toshiba%20Satellite%2

  • [SOLVED] System clock refuses to adopt my timezone

    (Running ArchLinux in VMWare) I'm trying to set my system clock to Europe/Lisbon unsuccessfully. I followed these steps: Step 1. (rc.conf) HARDWARECLOCK="UTC" TIMEZONE="Europe/Lisbon" Step 2. (localtime) $ rm /etc/localtime $ ln -sf /us/share/zoneinf

  • Ilustrator CS5 Problem

    Good afternoon In Ilustrator CS5 the section to move in vertical the other way around  goes in value in negative upwards and value in positive downwards. In CS4 was well i now no It is possible to correct it? Thanks