Why did my laptop start asking for application manager?

I had an old Macbook with CS5 on it for a long time and it worked fine. Then I did a recent migration to a new Macbook Air, and suddenly a couple weeks later a sign comes up, a box, saying I need a newer version of appication manager. I did not even now what that was, so I googled it and found it and downloaded it. Then a sign came up saying I had CS5 on more that 2 computers. So I chatted with Adobe a few times, wasted many hours— they said they reset the license, it still never went away. I finally just de-installed CS5 off the macbook air, as delete applications manager and the macbook air is now just running an old copy of CS3. Should I try to re-install CS5, it kind of worreies me now. Maybe I should just wait till I get CS7? thats the next Photoshop I am going to buy. thanks.

Hi Kevin,
Chris Cox is correct. When you do a migration tool/Time Machine, few important files may not transfer correctly. Hence as I suggested above uninstall the software and run Adobe Cleaner Tool and re-install from the Original media.
Regarding "Too many activations" error. You can install and activate the software on 2 computers and use simultaneously. If you have any changes to your computer like Hard Drive replace or upgraded your OS without deactivating the software, you may not be able to activate on the new computer. Hence you need to contact Adobe Customer Service to make few changes to your license which allows you to activate the software on new computer.
If Phone support is not available, Chat support is always there for you. Please let us know if the issue gets resolved.
Regards,
Jairaj

Similar Messages

Premiere Elements Won't launch. Asking for Application Manager

I tried to install Elements 13 and it did with no problems. but when i tried to open it, a window popped up saying that adobe application manager (required to run your product) is missing or damaged please go to this website and install it. so i go to the website and install AAM but when i am installing it, it says "installer failed to initialize". this leaves me clueless. i know there are other people with this problem because i have read about it in other forums. i am stuck, any help would be appreciated.

mmoonnkkeeeyy
On what computer operating system is your Premiere Elements 13 running?
What link are you using for the Adobe Application Manager? Is it the following
Adobe - Adobe Application Manager : For Windows : Adobe Application Manager
ATR

Adobe Captivate 8 trial: does not open and asks for Application Manager

Hello,
Whenever I try to open Captivate 8, it shuts down and shows this message:
However, I installed Application Manager and I still get this message.
What should I do?
Thanks
Tiago

I already have Creative Cloud installed.But the message still appears.

HT4436 Since installing Ios7 280 music tunes out of a total of 360 will now only play when I'm within range of WiFi. How can I get them back on my Iphone 4s and scrap this stupid icloud that I did not want or ask for in the first place.

Since installing Ios7 280 music tunes out of a total of 360 will now only play when I'm within range of WiFi. The remainder now appear with the stupid Icloud logo beside them. How can I get them back on my Iphone 4s and scrap this stupid icloud that I did not want or ask for in the first place. Why can't rotten apple ask if you want the dam icloud rather than just stealing everything without permission and then you can only have access to it through wifi.

Wow, just posting and it seems that there is a solution that is working for me...
What I've did is I turned off iTunes Match on my iPhone, then turned in on again. Now in my iTunes library on my mac I can get the duplicates to be matched or uploaded to iCloud with a right-click, add to iCloud. iTunes Match starts to check the songs and everything is done correctly. Pretty nice!

The app store on my laptop is asking for my husband's apple id and password to update my apps, but he is not a user on my computer. How do I change that? The apple id email is grayed out, so I cannot select it.

The app store on my laptop is asking for my husband's apple id and password to update my apps, but he is not a user on my computer. How do I change that? The apple id email is grayed out, so I cannot select it.

Delete and redownload those applications.
(120219)

Why are all my apps asking for permission again?

For some reason, the majority of my apps started asking for permission to use my photos, location, microphone or any other part of the system that requires permission upon first lunch. I did not do any system updates recently nor have I reset any warnings in the settings. Anybody else have this issue or know what could be causing it?

You won't be charged for downloading free apps (or other free items), you will only get a temporary store holding charge ($1 or the approximate local equivalent) to check that the card details are correct and that the card is valid, which will disappear within a few days or so.
But unless you used the instructions that I linked to in my previous reply when creating the account, then you won't be able to download anything (including free items) until you enter your card details.

SDK Trunk. Update my local copy has started asking for username/password

SDK Trunk. Update my local copy has started asking for username/password
these has been happening on and off for a few days now.
when i click update on my local copy of the sdk ready to do my morning build I've started to be asked for a username and password. I do have a username and password for sandbox and patching etc but entering this has no effect.
are there times of day when the trunk is locked or something like that? This is not happening all the time but it is several times a day.
has anyone any idea why this is happening
Ive don e all the usual things, clean my local version, grabbed a totally new version etc
im on windows using TortoiseSVN(which is always using a current build)
cheers
g

Ive had this same issue on and off across all the open source svn
im yet to find any pattern apart from the fact that the auth error only ever shows the root of the svn request.
Ie http://opensource.adobe.com/svn/opensource/
Now im not sure if thats just the way the reporting ui works of if it indicates that somewhere in the update it starts to trigger the url rot and thats where the auth request gets triggered. This may be total nonsense. Just a thought.

Why does my router disconnect every time I sleep the computer? Why did this only start to happen recently?

Why does my router disconnect every time I sleep the computer? Why did this only start to happen recently?

Actually it does with Ethernet too: http://support.apple.com/kb/HT2412?viewlocale=en_US&locale=en_US
What happens when the Mac goes to sleep (not just into idle mode or display sleep)?
On all Macs:
The microprocessor goes into a low-power mode
Video output is turned off, and a connected display may turn off or enter its own idle state
Apple-supplied hard disks spin down; third-party hard disks may spin down
On portable Macs:
The Ethernet port turns off, if applicable (see note below)
Expansion card slots turn off
The built-in modem, if present, turns off (see note below)
An AirPort card, if present, turns off (see note below)
The USB ports only responds to the power key on an external keyboard (see below)
The optical media drive, if present, spins down
Audio input and output turns off
Keyboard illumination, if a feature of your portable computer, turns off
But see the note about selecting, "Wake For Network Access" in Energy Saver preferences.
Note: Portable computers have no network connectivity when in sleep mode, but can wake if the Energy Saver option "Wake for network access" is enabled. If you wish to use file sharing or don't want to interrupt your Internet connection, you should not manually put the computer to sleep, and you should drag the "Computer sleep" slider to Never.

Why does firefox beta download ask for adminstrator password but when I put it in, its says wrong password or user name?

whenever I try to download firefox beta on my laptop it asks for an adminstrator password but when i put it in it says wrong user " name or password" so I try to by pass that by trying to download as user but then nothing happens the dialog box disappears and I have to start the download all over again. I'm trying to sync firefox with my android phone but I can't get the desktop/laptop version going.

Since installing Windows 7 there have been some weird goings on with my laptop.
I kept muddling around with this and ran a few diagnostics only to find that everything was fine. There was an incompatibility problem with Windows 7 and Firefox (safe mode) which I cared for by simply agreeing with everything Windows 7 wanted to do. It made an adjustment and apparently between the two programs they worked it out.
I tried downloading Firefox 4 beta one more time...using a fresh download in my Firefox browser and from the Firefox webpage. Oddly, this time the program downloaded saved itself to my laptop. I was able to open and install it without incident.
Now, I am all sync'd up!
Thank you very much for your assistance

Failures were detected while initiating start task for application 'em'

Hello there,
I'm facing a problem here that I'm not able to resolve it.
This is the third time I reinstalled the WebLogic Sever (WebLogic Server Version: 10.3.5.0) and I'm getting the same error.
After installing the WebLogic Server, everything goes fine, I can access /em, /console, /analytics.
The problem is when I create a WebService (with JDeveloper Studio 11.1.2.3.0). After deploying the WebService and restart WebLogic Server, the /em deployment can't start.
I get this error while accessing to localhost:7001/em:
Error 404--Not Found
From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
10.4.5 404 Not Found
The server has not found anything matching the Request-URI. No indication is given of whether the condition is temporary or permanent.
If the server does not wish to make this information available to the client, the status code 403 (Forbidden) can be used instead. The 410 (Gone) status code SHOULD be used if the server knows, through some internally configurable mechanism, that an old resource is permanently unavailable and has no forwarding address.
When I try to start it from the console I get this error (it doesn't matter if I start it Servicing all requests or Servicing only administration requests):
java.lang.NoClassDefFoundError: javax/faces/application/ProjectStage
Errors were encountered while performing this operation.
Here is the log file:
<Mar 27, 2013 12:24:43 PM GMT-03:00> <Warning> <Deployer> <BEA-149004> <Failures
were detected while initiating start task for application 'em'.>
<Mar 27, 2013 12:24:43 PM GMT-03:00> <Warning> <Deployer> <BEA-149078> <Stack tr
ace for message 149004
java.lang.NoClassDefFoundError: javax/faces/application/ProjectStage
at java.lang.Class.getDeclaredFields0(Native Method)
at java.lang.Class.privateGetDeclaredFields(Class.java:2291)
at java.lang.Class.getDeclaredFields(Class.java:1743)
at weblogic.j2ee.dd.xml.BaseJ2eeAnnotationProcessor.getFields(BaseJ2eeAn
notationProcessor.java:1024)
at weblogic.j2ee.dd.xml.BaseJ2eeAnnotationProcessor.getFields(BaseJ2eeAn
notationProcessor.java:1017)
Truncated. see log file for complete stacktrace
Caused By: java.lang.NoClassDefFoundError: javax/faces/application/ProjectStage
at java.lang.Class.getDeclaredFields0(Native Method)
at java.lang.Class.privateGetDeclaredFields(Class.java:2291)
at java.lang.Class.getDeclaredFields(Class.java:1743)
at weblogic.j2ee.dd.xml.BaseJ2eeAnnotationProcessor.getFields(BaseJ2eeAn
notationProcessor.java:1024)
at weblogic.j2ee.dd.xml.BaseJ2eeAnnotationProcessor.getFields(BaseJ2eeAn
notationProcessor.java:1017)
Truncated. see log file for complete stacktrace
>
I really don't know why /em can't start after deploying a WebService.
Thanks in advance, Max.

Hello there,
I'm facing a problem here that I'm not able to resolve it.
This is the third time I reinstalled the WebLogic Sever (WebLogic Server Version: 10.3.5.0) and I'm getting the same error.
After installing the WebLogic Server, everything goes fine, I can access /em, /console, /analytics.
The problem is when I create a WebService (with JDeveloper Studio 11.1.2.3.0). After deploying the WebService and restart WebLogic Server, the /em deployment can't start.
I get this error while accessing to localhost:7001/em:
Error 404--Not Found
From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
10.4.5 404 Not Found
The server has not found anything matching the Request-URI. No indication is given of whether the condition is temporary or permanent.
If the server does not wish to make this information available to the client, the status code 403 (Forbidden) can be used instead. The 410 (Gone) status code SHOULD be used if the server knows, through some internally configurable mechanism, that an old resource is permanently unavailable and has no forwarding address.
When I try to start it from the console I get this error (it doesn't matter if I start it Servicing all requests or Servicing only administration requests):
java.lang.NoClassDefFoundError: javax/faces/application/ProjectStage
Errors were encountered while performing this operation.
Here is the log file:
<Mar 27, 2013 12:24:43 PM GMT-03:00> <Warning> <Deployer> <BEA-149004> <Failures
were detected while initiating start task for application 'em'.>
<Mar 27, 2013 12:24:43 PM GMT-03:00> <Warning> <Deployer> <BEA-149078> <Stack tr
ace for message 149004
java.lang.NoClassDefFoundError: javax/faces/application/ProjectStage
at java.lang.Class.getDeclaredFields0(Native Method)
at java.lang.Class.privateGetDeclaredFields(Class.java:2291)
at java.lang.Class.getDeclaredFields(Class.java:1743)
at weblogic.j2ee.dd.xml.BaseJ2eeAnnotationProcessor.getFields(BaseJ2eeAn
notationProcessor.java:1024)
at weblogic.j2ee.dd.xml.BaseJ2eeAnnotationProcessor.getFields(BaseJ2eeAn
notationProcessor.java:1017)
Truncated. see log file for complete stacktrace
Caused By: java.lang.NoClassDefFoundError: javax/faces/application/ProjectStage
at java.lang.Class.getDeclaredFields0(Native Method)
at java.lang.Class.privateGetDeclaredFields(Class.java:2291)
at java.lang.Class.getDeclaredFields(Class.java:1743)
at weblogic.j2ee.dd.xml.BaseJ2eeAnnotationProcessor.getFields(BaseJ2eeAn
notationProcessor.java:1024)
at weblogic.j2ee.dd.xml.BaseJ2eeAnnotationProcessor.getFields(BaseJ2eeAn
notationProcessor.java:1017)
Truncated. see log file for complete stacktrace
>
I really don't know why /em can't start after deploying a WebService.
Thanks in advance, Max.

Thunderbird suddenly started asking for my password, but does not accept it. (Web mail works fine with the same password)

Thunderbird starting asking for my password. I know the password, just have not been asked for years.
After typing in password keep getting message
'Sending of password did not succeed. Mail server mail.intergate.com responded: dmanns logon failed '
however, I went to Webmail.intergate.com; was redirected to http://email.1dial.com/webmail/Login.aspx.
Can get email from webmail just fine (same password), just not via Thunderbird.
Have already run two anti-virus scans. Have deleted the saved passwords and re-entered them as the program asked for them and renamed key.db & signons.sqlite (Read this in a forum on the web) and they rebuilt themselves. Still can not get email via Thunderbird.

Did you contact your email provider? They may have server issues.

Why did I pay £25.00 for snow leopard

Why did I pay £25.00 for snow leopard?
Ive installed it and have noticed no difference.............have you?
Jeff

That's a point fo confusion.
If your MacBook has a Core 2 Duo processor (64-bit) and not the earlier Core Duo processor (32-bit), you can run 64-bit versions of Apple's applications. Whether the speed improvements are mostly because of this "64-bit'ness" or mostly because Apple re-coded the bundled apps (such as the all-important Finder) to be more efficient, I'm not so sure. Apple did optimize their code to reduce bloat, and it is supposedly a lot more than just removing the PowerPC code. This article has a good high level explanation.
http://www.macworld.com/article/142379/2009/08/snowleopard_64bit.html
The other layer for 32 versus 64-bit discussion is in the core of the OS itself, the kernel. Apple seems to be playing it safe initially, and all Macs (except for Xserve servers) are running the 32-bit kernel by default. This may be to ensure third-party software compatibility during the transition to 64-bit. The more recent Macs are capable of switching to the 64-bit kernel on startup. Older Core 2 Duo Macs (that can run 64-bit apps) cannot use the 64-bit kernel. This web page (with related utility) has a good consolidate explanation, although I cannot confirm everything is 100% accurate.
http://www.ahatfullofsky.comuv.com/English/Programs/SMS/SMS.html
So there are really two levels. 64-bit applications and the 64-bit kernel. 64-bit apps can run with the 32-bit kernel just fine, as long as your iMac has Core 2 Duo processors. I'm just going to keep things +as is+, and not worry about it. Snow Leopard is running great, and that's good enough for me no matter what part is 64-bit and what part is not.

I was updating software and suddenly my IPHONE started asking for I tunes on mobile screen , how can i get by screen back or How i can restore without loosing data , I m more worried about data , Please help in resolutio

i was updating software and suddenly my IPHONE started asking for I tunes on mobile screen , how can i get by screen back or How i can restore without loosing data , I m more worried about data , Please help in resolutio

What exactly are you seeing on the phone's screen ? If the iTunes icon and cable then the phone is in recovery mode, in which case it's too late to take a new backup or to copy any content off the phone - you will have to connect the phone to your computer's iTunes and reset it back to factory defaults, after which you can restore to the last backup that you took or just resync your content to it

Why doesn't Photoshop touch ask for access to local photos on my iPad so I can grant access and edit?

Why doesn't Photoshop touch ask for access to local photos on my iPad so I can grant access and edit?

That's odd. Does this mean that you want to have the request or that you can't see the photos even though you enabled it over the privacy/photos?
If you enable it - it's not necessary to get the request. If you want the request the safest way to get it back is to reset the privacy settings by going to iPad settings/General/Reset/Reset Location & Privacy
thanks,
Ignacio

Why does mac os keep asking for keychain password

why does mac os keep asking for keychain password

I'm getting this same problem. It seems random when it asks for the password, maybe every 3 or 4 days it'll ask when I plug it in at night. I've tried restoring from an older backup, which has not resolved the issue.

Why did my laptop start asking for application manager?

Similar Messages

Maybe you are looking for