Why did my sequence disappear after exporting the project?

After a late night of editing, I rendered and exported the project (mp4). This morning the client asked for an edit, but when I open the project, only the source media are there. There is no sequence, and I haven't been able to find the file. Suggestions?
(First project in Premiere Pro after several years of using Premiere Elements.)

Here are the steps I would take...
1) Look closely into your project panel to see if maybe it's in there, just looking like media to you (I've made that mistake before) -- maybe switch to list view and it might be easier to tell the difference and compare the names/types. Also try searching on the sequence name if you know it.
2) If it's definitely not in the project panel, then go to File > Open recent > and see if maybe there is another project in the recent list that may contain the sequence you need.
3) If it's still not there, then like Jim said, you must have deleted it... Go to your 'Adobe Premiere Pro Auto-Save' folder (usually in the same parent directory as your Pr project files) and open older saved versions until you (hopefully) find one with the sequence you need intact.
4) If all else fails... Do you use time machine or some other incremental backup system? If so, roll back to a state where the sequence is still available.

Similar Messages

Why did my ringtones disappear after i sync my iphone4

why did my ringtones disappear after i sync my iphone4. I checked them in the 'tones' and clicked 'sync' and they are still not showing up on my phone???

Make sure you have checked on your Device Settings > Sounds > Ringtones > they should appear under Ringtones categories and listed above the system ringtones that came with IOS.
If you still don't find them, uncheck 'SYNC TONES', sync then re-check SYNC TONES and sync again.

HT4191 Why did my contacts disappear after syncing with 10.7 for the frist time and how do I get them back?

It also apparently changed all the contacts on my computer. Now I have a only a portion of my contacts both on my PC and my iPod 4g with nothing to restore from. Thanks Apple! Hope you update your crap OS sometime soon. Maybe then my Messenger app will start working again. Maybe then I can use the app store again. Maybe then I can use a working map again. Maybe then I will start using my apple devices again.

yes, i did too.. will probably just try to restore them from the iphone sync.

Why do imported files disappear after disconnecting the card reader?

I recently replaced my hard drive and upgraded to OS X Yosemite 10.10. I restored my computer from a backup on an external hard drive. Since then, Lightroom 4 has been losing my files. They appear to import normally and are still in the catalog as long as the card reader is plugged in, but as soon as I disconnect the card reader Lightroom can no longer find the files and they do not show up when I attempt to search for them by name. What's going on? How can I get Lightroom to store my files as it did before?

Move and Add are normally disabled for non-hard drive removable media. This is to prevent people from losing photos and all the work they might have done on those photos.
Normal Procedure is to:
1. Insert your camera's media
2. Import into Lightroom using Copy which will make a duplicate of your file from your media and store it on your hard drive (or external hard drive - which ever you specify)
3. Remove media
4. Work on your images in Lightroom from the location they were copied to - never from the original media
Lightroom 4 - Importing and Organizing Your Images | Getting Started with Adobe Photoshop Lightroom 4 | Adobe TV

Why do my images disappear after I animate them and choose the playback button to preview the animations

Why do my images disappear after I animate them and choose the playback button to preview the animations

Sorry, but the information you provide isn't even close to the amount we need to help us help you:
FAQ: What information should I provide when asking a question on this forum?

InDesign CC: Text in editable text fields disappearing after exporting

Hi,
I'm having an issue of text disappearing from editable text fields after exporting the document as an interactive pdf. I've created the text that needs to be editable in acrobat with InDesign CC. So for example, I want to have an editable text field that already says "I'm Mary." I want users to have an ability to change "Mary" to "Tom" or "Ben" in Acrobat. So the pdf should have an editable text form saying "I'm Mary" sentence when users open the pdf in Acrobat. However, after exporting, the text fields remains but the text itself "I'm Mary." is gone. I don't understand why this happens because the text is there when previewed in SWF preview window in InDesign.
The below is the list of steps I took.
STEP 1: Create some texts (For example, m with the text frame tool in InDesign CC
STEP 2: Right click the frame, and click on "Interactive > Convert to Text Field"
OR
STEP 2: Select the text frame, open "Buttons and Forms" window and change the type as "Text Field"
STEP 3: Export the document as an interactive pdf. The setting is default.
Result: When I open the pdf in Acrobat, the text field is there, but it is blank.
Please help me to resolve this issue. I know this is possible because a person before me at my job did it.
Thank you!

As far as I know, to have a pre-populated text form [I'm Mary] appear in the text field, you will need to set the Default Value of the text field in Acrobat. You can do that by selecting the property of the field > Options > Default Value

Export file disappears after exporting

Export file disappears after exporting
Tried dataexport(calc script), report script,need du=ynamic calc members too..
its urgent now....please help
But I have lots and lots of dynamic calc members...its huge...will take hours together to change...so I planned to make stored for only those members which are required in export file...but now...It seems that default calc is not getting executed... may be that happened because I changed few member properties...
Any thoguths why now dynamic calc is not working?
Thanks a lot for any help..its really urgent now...

Regardless of which limited export process you are using (dataexport calc script, report script, or MaxL/Esscmd export) I can't imagine the export file disappearing if it in fact gets written out at all.
As rinku wrote, if it's a true Esssbase export it's either in the app folder or where ever you wrote it with MaxL/Esscmd.
There are known issues with dynamic calc and dataexport. I've seen this myself and ultimately gave up on exporting the dynamic members. Yes, your changes could cause your exising aggregation scripts to give different results.
How about this:
1) Reduce scope of export process and remove dynamically calculated Accounts/Periods (a guess on my part, but likely right)
2) Export to known location (app folder under Essbase folder or some server-addressable folder). Btw, how are you doing the export? It wasn't clear from your post, but I guess it doesn't really matter.
3) See if that works, and if so, expand until failure. That will tell you what is and isn't going to work.
Regards,
Cameron Lackpour

HT5085 I have found that at least 3 music videos that I had previously purchased are not available in my I-tunes music video list. I paid for them over a year ago, why are they not accessible, and why did they just disappear from my lists?

I have found that at least 3 music videos that I had previously purchased are not available in my I-tunes music video list. I paid for them over a year ago, why are they not accessible, and why did they just disappear from my lists?

Have you deleted anything from your iTunes library ? Have you checked to see if they are still on your computer, but not listed in your iTunes library ?
If not then do they show in the Purchased link under Quicklinks on the right-hand side of the iTunes store homepage for redownloading ? If they don't show there and others do and they are still in your country's store, then check to see if they are hidden : http://support.apple.com/kb/HT4919
If they are no longer in your store for redownloading (or you aren't in a country where music videos can be redownloaded) then you will need to copy them back from your backup of your library/downloads.

In fcpX....how can I put an IN and OUT points in my sequence and after export a movie???

In fcpX....how can I put an IN and OUT points in my sequence and after export a movie???

You can't. You can't export part of a sequence. Duplicate it and remove the bits you don't want to export from the duplicate.

After exporting, the sound in some areas goes crazy

So like the title explains, after exporting the sound in a couple of areas goes crazy, like static. I tried twice, still the same result.
NB: I exported in H.264 in Apple devices 1080p, MBP retina 15 inch 2.6 GHz i7, FCPX 10.0.8
Thank you

When in FCPX, the sound works fine (in mono) but when exported in H.264, the sound becomes static.
I recently had a similar problem, with Final Cut playing the audio fine but in the exported file the sound was static. The source of the problerm was that the audio was just slightly less than 48 kHz. After using Compressor to transcode the media with audio at 48 kHz and importing the transcoded file into Fianl Cut, the exported audio was fine.
https://discussions.apple.com/message/25559825#25559825

I run 3 email accounts on Mac Mail, all 3 disappeared after doing the latest OS X update. I have tried adding the accounts back but no mail appears. Help!

I run 3 email accounts on Mac Mail, all 3 disappeared after doing the latest OS X update. I have tried adding the accounts back but no mail appears. Help!

The mailbox list is divided into categories with headings in caps, such as ON MY MAC. When you hover the cursor over one of those headings (except for MAILBOXES), you should see the word Show or Hide on the right. Click Show. The MAILBOXES category can't be hidden.
In each category, the mailboxes are arranged in groups, such as Inbox. To the left of each group is a small disclosure triangle. If the triangle points to the right, click it so that it points down.

Why did my library stop adding to the number of plays a song had?

why did my library stop adding to the number of plays a song had?

Same thing happened to me. Can't understand why. We'll see if they charge overages.

I have been edited a project for weeks. Today, a few minutes after opening the project to work on it again, my computer shut down abnormally. The timeline disappeared. All the media is still in the project but my edited timeline is gone. Please help!

I have been edited a project for weeks. Today, a few minutes after opening the project to work on it again, my computer shut down abnormally. The timeline disappeared. All the media is still in the project but my edited timeline is gone. Please help!

You have 10.6 on that machine, I suggest you stick with it for performance, third party hardware and software reasons as long as possible.
Consider 10.8 (not 10.7) when it's released, because 10.7 and 10.8 will require a new investment in software and newer third party hardware as it requires newer drivers the old machines won't have. (forced upgrade because of software, really nice of them)
http://roaringapps.com/apps:table
Far as your Safari problem do these things until it's resolved:
1: Software Update fully under the Apple menu.
2: Check the status of your plug-ins and update (works for all browsers) also install Firefox and see if your problems continue. You should always have at least two browsers on the machine just in case one fails.
https://www.mozilla.org/en-US/plugincheck/
Flash install instructions/problem resolution here if you need it.
How to install Flash, fix problems
3: Install Safari again from Apple's web site
https://www.apple.com/safari/
4: Run through this list of fixes, stopping with #16 and report back before doing #17
Step by Step to fix your Mac

Why did I suddenly lose all of the album artwork on my iPad

Why did I suddenly lose all of the album artwork on my iPad

You have to work this out with iTunes Support.
http://www.apple.com/support/itunes/contact/
You can change the country in the next screen in the upper left if needed. Click on Contact iTunes Store Support under the iTunes Store heading at the top right side of the page. Then click on Purchase, Billing & Redemption in the next screen and follow the prompts.

When i export the project as swf

I have this code in scene4 and when i play it from the project with ctrl+enter the kuler in this scene play and load the color theme correctly. When i export the project as swf the scene4 with this code play but they do not load the color theme. why?
stop();
button_12.addEventListener(MouseEvent.CLICK, fl_ClickToGoToScene1);
function fx_ClickToGoToScene1(event:MouseEvent):void
MovieClip(this.root).gotoAndPlay(1, "Scene1");
button_13.addEventListener(MouseEvent.CLICK, fl_ClickToGoToScene2);
function barca_ClickToGoToScene2(event:MouseEvent):void
MovieClip(this.root).gotoAndPlay(1, "Scene2");
button_14.addEventListener(MouseEvent.CLICK, fl_ClickToGoToScene3);
function dfdfs_ClickToGoToScene3(event:MouseEvent):void
MovieClip(this.root).gotoAndPlay(1, "Scene3");
import com.pixelfumes.kuler.*;
import flash.events.Event;
import fl.managers.StyleManager;
StyleManager.setStyle("scrollBarWidth",11);
var kuler:JSFLKuler = new JSFLKuler();
var devKey:String = "29CE344635AB36DB7F2A50B3C8AC7E55";
kuler.loadFeed("http://kuler-api.adobe.com/rss/get.cfm?listtype=recent&key="+devKey);
preloader_mc.gotoAndPlay(2);
kuler.addEventListener(com.pixelfumes.kuler.JSFLKuler.FEED_LOADED, onFeedReady);
kuler.addEventListener(com.pixelfumes.kuler.JSFLKuler.FEED_FAILED, onFeedFailed);
var stubMC:MovieClip = new MovieClip();
sp.source = stubMC;
function onFeedReady(e:Event):void{
if(kuler.getItemCount() < 1){
feedControl_mc.status_txt.text = "No Results";
}else{
for(var i:uint=0;i<kuler.getItemCount();i++){
var ki = new KulerItem();
stubMC.addChild(ki);
ki.y = i*60;
ki.setLabel(kuler.getItem(i).title);
ki.setSwatchColors(kuler.getItem(i).hexColor)
ki.setRating(kuler.getItem(i).rating);
sp.refreshPane();
hidePreloader()
function onFeedFailed(e:Event):void{
feedControl_mc.status_txt.text = "Feed Load Failed";
hidePreloader();
function removeKulerItems():void{
stubMC = null;
stubMC = new MovieClip();
sp.source = stubMC;
function hidePreloader():void{
preloader_mc.visible = false;
function showPreloader():void{
preloader_mc.visible = true;
var kulerTF:TextFormat = new TextFormat();
kulerTF.color = 0xFFFFFF;
kulerTF.font = "Arial";
StyleManager.setComponentStyle(TextInput, "textFormat", kulerTF);
search_btn.addEventListener("mouseDown",onSearch);
function onSearch(e:Event):void{
if(search_txt.text != ""){
feedControl_mc.gotoAndStop(4);
removeKulerItems();
showPreloader();
kuler.loadFeed("http://kuler-api.adobe.com/rss/search.cfm?searchQuery="+search_txt.text+"&startIndex=0&itemsPerPage=100&key="+devKey);
search_txt.addEventListener("keyDown",onKeyDownEvent);
function onKeyDownEvent(e:KeyboardEvent):void{
if(e.keyCode == 13){
onSearch(e);
//JSFL
function executeJSFL(args){
var file = args.shift();
var func = args.shift();
var result;
if( args.length > 0 ){
var arg = args.join( "\',\'" );
result = MMExecute(((((("fl.runScript(fl.configURI+\'Commands/" + file) + "\',\'") + func) + "\',\'") + arg) + "\');");
else{
result = MMExecute(((("fl.runScript(fl.configURI+\'Commands/"+ file) + "\',\'") + func) + "\');");
return( result );
function flTrace(str){
MMExecute("fl.trace(unescape(\""+ escape(str)+"\"));");
this.addEventListener(com.pixelfumes.kuler.KulerItem.ITEM_SELECTED, onItemSelected);
function onItemSelected(e:Event):void{
var args:Array = e.target.swatchColors;
args.push(escape(e.target.schemeName));
trace(e.target.swatchColors);
executeJSFL(["kuler/kuler.jsfl","addSwatches",args]);
info_btn.addEventListener("mouseDown",onInfoClick);
function onInfoClick(e:Event):void{
executeJSFL(["kuler/kuler.jsfl","showInfo"]);

probably because you're trying to use a cross-domain load (and violating a security barrier) without giving permission, Adobe - Flash Player : Settings Manager - Global Security Settings panel

Why did my sequence disappear after exporting the project?

Similar Messages

Maybe you are looking for