Why did my vm/windows wifi stop working after updating to OS X v 10.9 Maverick?

Hi All!
Updated to OS X 10.9 and now my VM Windows 7 wifi stopped working. The WIndows doesnt even see the macine has wifi capability. Was working fine yesterday. Help!

Another user reported the same problem with VMware Fusion. Update it to the most recent version and update the VMware Tools in your virtual machine, or Parallels Tools or Guest Additions if you are using Parallels or VirtualBox

Similar Messages

  • Why did my camera connection kit stop working after updating to iOS 6.0.1?

    Camera connection kit stopped working on ios6.01 updated phone. Same camera kit works on the iPhone that I did not update. Why does it not work with 6.0.1?

    The same story. No 3G after updating to 6.1.  Told my daughter temporarily not to do an update on her iPad with 6.01. We've exchanged SIMs. I inserted her SIM in my iPad - 3G appeared immediately. And my SIM in her iPad with ios 6.01 also WORKS FINE. We use the same provider - Megafon Moscow. After attempting to revert SIMs to original configuration, 3G disappeared on my iPad again. Don't know what's going on with SIM during the update to 6.1

  • Why did Premiere Elements 10 suddently stop working after complaining about requiring a drive update

    Two days ago Premiere Elements 10 worked fine. Now it is complaining that the GEForce 220 video card required a driver update. But I have the latest driver. Other users are having the same problem, from what I see on the GeForce support community. Is this something Adobe can fix?

    cjrenson wrote:
    I have the latest driver.
    According to Windows, or according to http://www.nvidia.com/Download/index.aspx ?

  • Why did my motorola s9-hd stop working with my iPhone 3gs?

    Why did my motorola s9-hd stop working with my iPhone 3gs? I can't even be a foot away from my iPhone before my bluetooth headset losses signal. It wasn't like that before. What changed and how can it be fixed?

    Sounds like you inadvertently have the Add Anchor Point tool active. Click and hold to get the full selection and choose the "regular" Pen tool at the top. (Or, just tap the P key.)

  • WIFI stopped working after I woke the computer up, now says connected to the network but not the internet, all other coputers and devices connected still with no problems, have pinged IP address from router and got the message "4 packets sent none receive

    Hi,
    WIFI stopped working after I woke the computer up, now says connected to the network but not the internet, all other coputers and devices connected still with no problems, have pinged IP address from router and got the message "4 packets sent none received"... Help
    I have tried network diagnostics which doesnt help... The only other ting is, when I woke the computer up it said tat another device was using my IP... My wife had plugged her phone into the computer to charge etc but even when i turn wifi off on the phone there is no change... also in settings on the phone the IP address is different...

    The answer to your question is - neither!
    Your PC should to configured to obtain an IP address automatically, and to obtain DNS server IP addresses automatically, from the Airport Express. This is the way Windows (and Macs for that matter) are configued by default, and that is the way most people have their computers set up. If you manually configured your PC's IP address to be the same as your wife's Mac, it certainly explains why your PC is not able to access the internet.

  • Coldfusion 64 bit windows installer stops working after recent microsoft update

    Coldfusion 64 bit windows installation stops working after recent microsoft updates and how I worked around it.
    My question is at the end.
    Trying to deploy coldfusion 9 enterprise 64 bit trial  version onto a Windows 2003 64 bit datacenter OS with all OS updates from MS (as of 4-7-2011).
    Steps taken (remember, this is all 64 bit):
    1. Installed the base OS which was slipstreamed with SP2.
    2. Checked w/ microsoft and installed 63 OS updates.
    3. Launch the CF9 trial exe.
    4. As soon as the first screen finishes (the one that looks like  it is extracting files) then the second screen pops up (the one that  simply says CF Adobe Coldfusion 9) and the progress bar quickly moves  95% to the right and the install application quits. No error, no nothing. No log file either.
    5. After a moment of incredulous silence (and retrying/rebooting,  etc), I started to google it. I found nothing. However, I did find a  post (thanks dspent!) that was helpful in that it told how he was able  to get at a log file of sorts, by pre-extracting the  coldfusion_9_WWE_win64.exe file and launching the adobe_cf.exe by hand.  (Dspent's install snafu was different than mine, but his post was very  valuable and got me started in the right direction.)
    6. Got a copy of rarunzipper and extracted the coldfusion_9_WWE_win64.exe file.
    7. From the windows directory created by step 6, I launched adobe_cf.exe.
    8. Same thing (the install application quits. No error, no nothing. No log file either.).
    9. I examine the hs_err_pidxxxx.log file (where the xxxx is a number).
    10. I see inside that file an ominous message: "A fatal error has been detected by the Java Runtime" then "Problematic frame ntdll.dll" and then "The crash happened outside the Java Virtual Machine in native code".
    11. OK, so now I am thinking ntdll.dll !! Native code !! It is like Java is telling me that for some reason it can't dance with the OS.
    12. On a hunch, I decided to test a CF install again on a server with just the base install of W3K3 64 SP2 (ie: skipping step 2 above this time).
    13. Bingo! That install works.
    14. Therefore, one of the 63 patches I had downloaded from MS had triggered a problem with the CF installer.
    15. Back on the first server (the one with the MS security  patches installed and the one that CF won't install on). In the CF file  adobe_cf.lax (one of the files extracted in step 6) there is a line that  mentions where the install gets it's java. Find that file, and check java version installer is using. It is using 1.6.0_14-b08.
    16. Off to the Java website, and there is a newer version of java (1.6.0_24-b07). Downloaded and installed it.
    17. Modify a line in adobe_cf.lax :
       before
         lax.nl.current.vm=resource\\jre\\bin\\java.exe
       after
         lax.nl.current.vm=C:\\program files\\java\\jre6\\bin\\java.exe
    (that assumes that you let step 16 install to the default location)
    Save the file.
    18. Run the install ... ** IT WORKS ** !
    Obviously, the built in java provided with the CF installer is  no longer compatible with some change introduced by some recent MS  update on the W2K3 64b SP2 platform.
    And now the interesting part. Although I forced the installer to used the new java, it did not incorporate it into the cf build (ie: in jvm.config, you still see c:/coldfusion9/runtime/jre AND the  version of java.exe that is in that directory is the original version,  not the newer version I forced the installer to use).
    On the surface, CF seems to run OK, but I have not done any application testing yet.
    And finally my
    ** QUESTION **
    Would it be appropriate to simply point the java.home var to the new java directory? I see that the directory structures and files are not exactly the same  (close though) so I certainly don't want to break things by doing this,  but instinct tells me that if the installer broke using the older  version, then something else is gonna break down the road if I don't use  the new version. On the other hand, the differences in the  directories and files is enough that it makes me very nervous, with my  limitied java skill set, to make this decision. 
    Thanks in advance!!
    Byron

    Hi Byron,
    Wow great post no doubt much of the information will be useful for those on Win03 SP2 +. Have to say not come across similar problem on Win08 r2 SP1 +.
    So to your question. Adobe security bulletin (http://kb2.adobe.com/cps/894/cpsid_89440.html) recommends running CF8 and CF9 with JVM 1.6.0_24. The bulletin does not say how to do that. I take you installed JDK and not just JRE 1.6.0_24? Post install of JDK follow these steps:
    Stop CF - SERVICES.msc stop "ColdFusion 9 Application Server".
    Take a copy of CF\runtime\bin\jvm.config - so you got a backup.
    Edit CF\runtime\bin\jvm.config find line "java.home=" and comment it out eg:
    #java.home=C:/ColdFusion9/runtime/jre
    Add new line like so and save jvm.config:
    java.home=C:/Program Files/Java/jdk1.6.0_24/jre
    Note  there the slashes and the location of the JRE (runtime) - you need to  point to the one in JDK because the other JRE in C:\Program  Files\Java\jre6 will be missing a DLL.
    Start CF via SERVICES.msc.
    HTH, Carl.

  • Wifi iPad 3 charger stopped working after updating to iOS 6, help!

    Wifi iPad 3 charger stopped working after updating to iOS 6.  The little iPhone charger charges it very very slowly, but the charger gets really hot after a while.  I restored it and everything works but the charger.  It's only a few months old, should I try a new iPad wall charger block?

    Hi,
    I did this after reading the forums and it made no difference. it has actually charged from 14% to 67% but thats taken over 12 hours.
    Will monitor it and if no joy will go to a apple store
    Thanks

  • WiFi stops working after install of latest 10.8.5 update on MacBook 5,1 third time reinstall OS X

    WiFi stops working after install of latest 10.8.5 update on MacBook 5,1 third time reinstall OS.
    MB used as email and surfing tool when on vacation. Worked fine for months. Installed the latest security patch (update) and WiFi quit working. Two days later (still on vacation) WiFi started working again and worked fine for the next 2 days.
    Came home and formatted and reinstalled 10.8.5 and all was fine again. We are selling the MacBook and setup new user, everything worked fine.
    The update came up again so I decided to install it and WiFi instantly stopped working after the restart.
    Does anybody have any idea what is happening.
    Thanks

    Not really, although WiFi has been a longstanding problem for lots of people. I fix for some breaks others.
    However, if you are trying to sell it, you need to revert it back to the OS that shipped with it. You cannot sell your copy of Mountain Lion with the Mac. It is only licensed to you.
    You also need to include the system disks that came with the Mac. If it came with Leopard (10.5), and you have a Snow Leopard (10.6) disk, you can install that if you provide that disk also.

  • Earpiece stopped working after updating to 5.0.1.

    It worked fine the night before.  Then it stopped working after updating to 5.0.1.  I can only hear calls on speaker.  Did anyone else have this problem.  I have tried all the fixes, restart, reboot, restore.  No debris in the headphone jack, and when volume is turned up or down it doesn't show headphones on the screen.  Nothing covering the earpiece.  Tried to blow out headphone jack with compressed air.  I'm thinking it is a glitch in the software.  Using Iphone 4 on Verizon.  Any thoughts or ideas?

    you can try reading the posts listed to your right in the "More Like This" box or by searching this forum.

  • HT201371 Touch ID stopped working after updating to IOS 7.1.

    Good morning to all,
    My touch ID stopped working after updating to IOS 7.1.
    It was working perfectly until the update and then it stopped recognizing my prints
    I've reset the phone and deleted my fingerprints and now I can't even add a fingerprint again.
    I am sure this is not a hardware problem since the phone was working perfectly before the update and it didn't fall nor anything similar.
    Also the sensor is clean as well as my fingers.

    Same problem... I think we all should let Apple know of this issue. http://www.apple.com/feedback/ tell them the probelm. So when they get too many complains they will surely fix it ASAP with a software update.

  • Upgraded to Windows 10: Wifi Stops Working after about 20 minutes operation

    Upgraded to windows 10. Everything was working fine. Then WIFI stops working. I reboot and again, things are fine then as the computer goes to sleep, WiFi stops working and won't reconnect unless I reboot. All other computers in the house using either Windows 7 or 8.1 are connecting just fine. Need some help or I'll roll back to 8.1. This is frustrating to say the least.  

    I have a HP pavilion X2 (10-j000na) which I have upgraded to Windows 10 and I have the same issue. Every so often the wifi signal is lost. When I go to the device manager it says there is an error with the driver for the Broadcom 802.11 abgn Wireless SDIO adapter. The only way to resolve this issue at the moment is to uninstall the driver and then re-installing it using the latest Windows 8 driver (sp68594.exe) in compatability mode for Windows 8.
    But even then it is only a matter of time before the driver corrupts again and needs re-installing. We need an updated driver for Windows 10 and fast!

  • Why do some apps stop working after update to iOS 6?

    I notice one of my apps stopped working after the iOS 6 update, in particular Uno HD, which I paid $5 for.  Why did this happen?

    I had solved the problem by installing the free app, which seemed to reset something, then I deleted the free app, and the paid version continued to work until the next day.  I was going to show one of my friends the game, and then it once again would not open- the same problem was back, as soon as I went to open it, it crashed back to the desktop without opening the game.  I had to re-install the free version again, and for a while, neither version would work, but then after a while, it started working again.  I guess I have to leave the free app installed or I won't be able to use the paid version of Uno.
    EDIT
    Just checked again, took the Uno app out of resident memory by double-pushing the home button and holding the app icon til it starts to shake, and then hit the minus symbol, which deletes it out of resident memory.
    Went to open it again, and it of course crashed back to the desktop again.  So there is some issue with it that is making it unstable.
    I have to keep pushing on either one of  the app icons continuously until one of them starts, and then the other one will start.
    Gameloft needs to do an update.
    Message was edited by: Sonic Bodhi

  • Why has Broken Sword 2.5 stopped working after OS X Lion 10.7.5 update?

    Dear users,
    Would any know why the fangame Broken Sword 2.5 stopped working after I decided to update my OS X Lion up to 10.7.5?
    Should this be a prompt for me to re-install the game after copying my save files?
    Thankfully ScummVM seems to be okay ...
    This sort of brings back memories of Windows.
    Thank you

    The savefiles were no where to be found, not even in the Application Support folder.
    I re-installed the .dmg file and chose "Replace" after dragging the App icon in to the Applications folder ... And still no results

  • Wifi stopped working after upgrade, Asus N13

    Hi,
    A couple of days ago my wireless stopped working after I ran a full upgrade.  I have tried to identify the problem to no avail.  I attempted to use the Ralink drivers for my chipset rt3072 but those worked very poorly compared to the rt2800usb driver in the kernel and it kept freezing my system.
    My relevant lsusb entry:
    Bus 010 Device 005: ID 0b05:1784 ASUSTek Computer, Inc. USB-N13 802.11n Network Adapter (rev. A1) [Ralink RT3072]
    Output of lsmod | grep rt2
    rt2800usb 17360 0
    rt2x00usb 9026 1 rt2800usb
    rt2800lib 49258 1 rt2800usb
    rt2x00lib 35947 3 rt2x00usb,rt2800lib,rt2800usb
    mac80211 463233 3 rt2x00lib,rt2x00usb,rt2800lib
    cfg80211 430289 2 mac80211,rt2x00lib
    crc_ccitt 1363 1 rt2800lib
    usbcore 173007 11 uhci_hcd,snd_usb_audio,rt2x00usb,rt2800usb,snd_usbmidi_lib,ehci_hcd,ehci_pci,gspca_main,usbhid,gspca_zc3xx,xhci_hcd
    Output of dmesg | grep rt2
    [ 9.835141] usbcore: registered new interface driver rt2800usb
    Output of dmesg | tail after trying to connect:
    [ 3547.374615] wlan0: authenticate with 20:aa:4b:02:de:1b
    [ 3547.443545] wlan0: direct probe to 20:aa:4b:02:de:1b (try 1/3)
    [ 3547.643999] wlan0: direct probe to 20:aa:4b:02:de:1b (try 2/3)
    [ 3547.847118] wlan0: direct probe to 20:aa:4b:02:de:1b (try 3/3)
    [ 3548.050252] wlan0: authentication with 20:aa:4b:02:de:1b timed out
    [ 3554.041445] wlan0: authenticate with 20:aa:4b:02:de:1b
    [ 3554.110531] wlan0: direct probe to 20:aa:4b:02:de:1b (try 1/3)
    [ 3554.310824] wlan0: direct probe to 20:aa:4b:02:de:1b (try 2/3)
    [ 3554.513940] wlan0: direct probe to 20:aa:4b:02:de:1b (try 3/3)
    [ 3554.717073] wlan0: authentication with 20:aa:4b:02:de:1b timed out
    I am using wicd but I have also tried with NetworkManager (I have made sure to systemctl disable the one not under test).
    I tried using wireshark in monitor mode on another computer to capture the exchange for authentication.  I can see my computer request authentication and I can see the router reply back.  The reply is an authentication successful message, but then my computer immediately tries to authenticate again.
    Any help would be appreciated.

    glittercutter wrote:
    Hi,
    I have the same device and a similar issue.
    Connection works but pinging the router shows extremely high ping (over 3000ms) and high packet loss, especially when the network is under load.
    The connection drop randomly and wont reconnect until I manualy unplug and replug the usb device.
    Downgrading the kernel fixed the problem.
    Which kernel version did you downgrade to?
    I also have the same device at home and I might face the same problem when I go back home next month.
    Last edited by ico (2013-04-27 18:30:07)

  • My wifi stopped working after a update last year and I have updated since, can this be fixe

    MMy wi fi stopped working after a update early last year and I have just made do since then by using i pad at home. I was going to upgrade my phone but need to clarify if it was the upgrade that broke my wifi and can it be fixed? I have heaed of Apple replacing phones affected by this problem. Please help

    Try the suggestions here to see if they resolve your problem:
    http://support.apple.com/kb/ts1559
    If those solutions don't work your iPhone 4s has developed a hardware problem. The permanent solution is to get it replaced. I have not heard of Apple replacing long out of warranty iPhones.
    You can search the internet for heating and freezing solutions that might work (at least for a while).
    For example, see here: https://www.youtube.com/watch?v=nj10bz5bI6A

Maybe you are looking for