Why displaying cube 0PUR_C01 content runs forever?
We conducted data load to 0PUR_C01 through two different datasources 2LIS_02_ITM and 2LIS_02_SCL. Check the cube, find the initial request for 2LIS_02_ITM did add 1648 records, but when we try to display this cube content by only selecting a few fields for selections like Company Code, Purchasing doc category, and etc., and take the default Max no. of hits of 200, but when hit the execute button to try to display the cube content, find it always runs forever at the selection screen with going no where!
Any reason?
Thanks
Kevin,
I never had this problem, while displaying the data. better check with your basis, they can help who is working on the system they can guide you. If you do RSRV tests in the parrllel it will take time.
I'm thinking, some of your colleague is doing some thing at that time. Check with your basis.
All the best.
Reagrds,
Nagesh Ganisetti.
Similar Messages
-
Cube DTP load runs forever but doesn't do anything
Hi experts.
I was hoping to get some guidance on an issue I'm having loading one of my cubes. I've searched the forums but can't seem to phrase the search correctly because I'm not getting any results. I'm on BW 7.x. Here is the data flow and scenario:
APO Datasource A --> BW Cube A --> DTP --> BW Cube C
APO Datasource B --> BW Cube B --> DTP --> BW Cube C
This is a monthly load that has been in place for several years with no previous issues. Yesterday everything went fine up until the load from
BW Cube B --> BW Cube C. This DTP normally runs about 10-15 minutes. But yesterday I tried running it twice, once for two hours, and once for 4.5 hours, and never got a single record to load in the target cube. It just kept showing "0 Data Records" under the Process Request section. The load never completed and never erred. I eventually cancelled both runs manually. Neither SM21 nor ST22 indicated any problems. I checked with my Basis guy and he did not see any issues on the Oracle side.
Now, Cube B is the largest cube in my BW at around 48 GB, but I've never had problems with this load before. Between the first and second attempt I dropped and rebuilt the indexes and verified statistics. But I don't know what to fix because I can't find any errors.
Points will be awared to anyone with viable suggestions or direction to a solution.
Thanks in advance.Hi,
During your load time, Is any new loads/full loads are scheduled at bw prod?
There might be something scheduled on that day. you need to track the whole loads scheduled in that time frame. you may find if any changes on scheduling loads other than usual.
before loading data to cube, have deleted the index?
Can you check dtp monitor logs in detailed?
During your load have you checked SM51 whether free application servers available to process your load?
Thanks -
Why won't my laptop run on battery and display on the monitor? If it is plugged in to power it works fine but the monitor goes blank if the power cord is removed. Any ideas?
Nothing is wrong. what your're seeing is by design.
-
Why does my Mac Mini running on Mavericks so slow to start and load apps?
Why does my Mac Mini running on Mavericks take so long to start and load apps?
1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the behest of a stranger. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts 51 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports 'com.autodesk.AutoCad com.evenflow.dropbox com.google.GoogleDrive' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 ` route -n get default|awk '/e:/{print $2}' ` 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n\t(%s)\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;5p;6p;8p;12p;' ' {sub(/^ +/,"")};NR==6;NR==13&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/root/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1000) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/d;/(etc|Preferences)\//s/^\.\/[^/]+//p;' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| ","||kMDItem'${p[35]}'=");sub("^.."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[9]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/ { next;} /%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]" "$1;b=b$1;} END { if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|POSIX sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ +B/{ s/.+= |(-[0-9]+)?\.s.+//g;p;} ' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / /{$0="'"${p[28]}"'"};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil PlistBuddy whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '-c Print /L*/P*/loginw*' '-c Print L*/P*/*loginit*' '-c Print L*/Saf*/*/E*.plist' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' '-c Print\ :'${p[35]}' 2>&1' '-c Print\ :Label 2>&1' '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'Beac|caug|dead[^bl]|FAIL|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,[lps]*.conf,pam.d,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}* .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' -i4TCP:0-1023 com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' );N1=${#c2[@]};for j in {0..8};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;A2 0 $((N1+1)) 2;C0;A1 0 $N1 1;C0;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A1 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D23 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D23 14 2 48 43;D13 4 5 32 1;D22 4 4 50 0;D13 14 3 49 5;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
8. If you see an error message in the Terminal window such as "syntax error," enter
exec bash
and press return. Then paste the script again.
9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with "Model Identifier." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed. -
Why does my mac mini run great for first half hour then run so slow almost to a stop?
why does my mac mini run fine then after a half hour runs very slow?
EtreCheck version: 2.2 (132)
Report generated 4/30/15, 3:58 PM
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Click the [Click to remove] links for help removing adware.
Hardware Information: ℹ️
Mac mini (Late 2012) (Technical Specifications)
Mac mini - model: Macmini6,1
1 2.5 GHz Intel Core i5 CPU: 2-core
16 GB RAM Upgradeable
BANK 0/DIMM0
8 GB DDR3 1600 MHz ok
BANK 1/DIMM0
8 GB DDR3 1600 MHz ok
Bluetooth: Good - Handoff/Airdrop2 supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
Intel HD Graphics 4000
Thunderbolt Display 2560 x 1440
System Software: ℹ️
OS X 10.10.3 (14D136) - Time since boot: 7:15:27
Disk Information: ℹ️
APPLE HDD HTS545050A7E362 disk0 : (500.11 GB)
EFI (disk0s1) <not mounted> : 210 MB
Macintosh HD (disk0s2) / : 499.25 GB (475.54 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
USB Information: ℹ️
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Apple, Inc. IR Receiver
Apple Inc. Display Audio
Apple Inc. Apple Thunderbolt Display
Apple Inc. FaceTime HD Camera (Display)
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Apple Inc. Thunderbolt Display
Gatekeeper: ℹ️
Mac App Store and identified developers
Startup Items: ℹ️
FanControlDaemon: Path: /Library/StartupItems/FanControlDaemon
Startup items are obsolete in OS X Yosemite
Problem System Launch Daemons: ℹ️
[failed] com.apple.mtrecorder.plist
Launch Agents: ℹ️
[loaded] com.oracle.java.Java-Updater.plist [Click for support]
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Click for support]
[failed] com.apple.spirecorder.plist
[loaded] com.macpaw.CleanMyMac3.Agent.plist [Click for support]
[loaded] com.oracle.java.Helper-Tool.plist [Click for support]
User Launch Agents: ℹ️
[not loaded] com.jdibackup.JustCloud.autostart.plist [Click for support]
[loaded] com.jdibackup.JustCloud.backupstart.plist [Click for support]
[loaded] com.jdibackup.JustCloud.notify.plist [Click for support]
[loaded] com.macpaw.CleanMyMac3.Scheduler.plist [Click for support]
[running] com.spigot.SearchProtection.plist [Click for support]
User Login Items: ℹ️
iTunesHelper Application Hidden (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
CleanMyMac 3 Menu Application Hidden (/Applications/CleanMyMac 3.app/Contents/MacOS/CleanMyMac 3 Menu.app)
Internet Plug-ins: ℹ️
FlashPlayer-10.6: Version: 17.0.0.169 - SDK 10.6 [Click for support]
Flash Player: Version: 17.0.0.169 - SDK 10.6 [Click for support]
QuickTime Plugin: Version: 7.7.3
JavaAppletPlugin: Version: Java 8 Update 45 Check version
Default Browser: Version: 600 - SDK 10.10
Safari Extensions: ℹ️
Slick Savings Adware! [Click to remove]
Ebay Shopping Assistant Adware! [Click to remove]
Searchme Adware! [Click to remove]
3rd Party Preference Panes: ℹ️
Fan Control [Click for support]
Flash Player [Click for support]
Java [Click for support]
Time Machine: ℹ️
Time Machine not configured!
Top Processes by CPU: ℹ️
4% WindowServer
2% fontd
0% taskgated
0% notifyd
0% cloudpaird
Top Processes by Memory: ℹ️
836 MB kernel_task
82 MB WindowServer
66 MB JustCloud
66 MB SubmitDiagInfo
66 MB loginwindow
Virtual Memory Information: ℹ️
12.00 GB Free RAM
4.33 GB Used RAM
0 B Swap Used
Diagnostics Information: ℹ️
Apr 30, 2015, 08:42:48 AM Self test - passed
Apr 29, 2015, 09:04:50 AM /Users/[redacted]/Library/Logs/DiagnosticReports/com.apple.WebKit.WebContent_20 15-04-29-090450_[redacted].crash -
How to catch and display a link content in another portlet page?
Can you tell me how to display a URL content into next page after an user click s on this link? I am developing a JSR 168 portlet under a Portal. I have 3 pages so far in my portlet. view.jsp, view2.jsp and IpByHourPage.jsp. view2.jsp displays a lis of IP address. When an user clicks on an IP in view2.jsp, it goes to IpByHourPage.jsp. How to catch the IP address such as 123.23.89.21 that an user just click displayed in IpByHourPage.jsp. I don't know why I got null value returned.
Also, I don't know how to do a "go back to previous page". I want to go back to view2.jsp from IpbyHourPage.jsp
Here is my code
in view2.jsp
<portlet:renderURL var="aURL">
<portlet:param name="goto" value="IpByHourPage"/>
</portlet:renderURL>
<a href="<%=aURL.toString() %> "><%=MyIP%></a>
in IpByHourPage.jsp
<%
String MyIPHour = request.getParameter("goto");
%>
<h1>IP Report by Hour ( <%=MyIPHour%> )</h1>
<portlet:renderURL var="Ret_IPByHour">
<portlet:param name="Ret_IPHourPage" value="Ret_IPByHourPage"/>
</portlet:renderURL>
<center> <a href="<%=Ret_IPByHour.toString() %> "><b>Choose Another IP</b></a></center>
in my .java file
protected void doView(RenderRequest request, RenderResponse response)
throws PortletException, IOException, UnavailableException {
response.setContentType("text/html");
String MyBegDate = request.getParameter("BegDate");
String MyEndDate = request.getParameter("EndDate");
String MyNetworks = request.getParameter("networks");
String MyYourName = request.getParameter("yourname");
PortletURL renderURL = response.createRenderURL();
renderURL.setPortletMode(PortletMode.VIEW);
request.setAttribute("renderURL", renderURL.toString() )
String GotoRenderAction = request.getParameter("goto");
String MyIPHourAction = request.getParameter("Ret_IPHourPage");
if ( (MyIPHourAction!=null) && MyIPHourAction.equals("Ret_IPByHourPage") )
PortletRequestDispatcher kk = getPortletContext().getRequestDispatcher("/view2.jsp");
kk.include(request, response);
if (MyIPHourAction != null && MyIPHourAction.equals("Ret_IPByHourPage"))
PortletRequestDispatcher mm = getPortletContext().getRequestDispatcher("/view2.jsp");
mm.include(request, response);
if (GotoRenderAction != null && GotoRenderAction.equals("IpByHourPage"))
request.setAttribute("BegDate", "MyBegDate");
request.setAttribute("EndDate", "MyEndDate");
System.out.println("BegDate" + MyBegDate);
System.out.println("Endate" + MyEndDate);
PortletRequestDispatcher mm = getPortletContext().getRequestDispatcher("/IpByHourPage.jsp");
mm.include(request, response);
if(MyEndDate!= null )
PortletRequestDispatcher prd = getPortletContext().getRequestDispatcher("/view2.jsp");
prd.include(request, response);
else if (MyEndDate==null && GotoRenderAction == null)
PortletRequestDispatcher prd = getPortletContext().getRequestDispatcher("/view.jsp");
prd.include(request, response);
The problem for above code is the clicked single IP can not be displayed in IpByHourPage.jsp. and I cannot go back to view2.jsp from IpByHourPage.jsp. when I click "Choose Another IP"
I find out that the MyBegDate and MyEndDate values are all null when I click Choose Another IP link. I got the following error message
Caused by: javax.servlet.ServletException: Unparseable date: "null null"
at org.apache.jasper.runtime.PageContextImpl.doHandlePageException(PageContextImpl.java:858)
at org.apache.jasper.runtime.PageContextImpl.handlePageException(PageContextImpl.java:791)
at org.apache.jsp.view2_jsp._jspService(view2_jsp.java:651)
at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:97)
How to fix above problems. ThanksI think the problems are related to portletsession. But I don't know how to use it. How to put portletsession into doview method or my jsp pages. Can anyone tell me in my code? Thanks a lot.
-
Query runs forever when using selection on line item dim
we have a cube zcube which has po number as a line item dimension .
everymonth users run queries this cube using po number as selection
criterai and using a wild card search on this field . every time
queries have run fine . however , this month when we try to do so
the query runs forever and no results are returned . i also tried
listcubing with similar selection but it also did not return any results .
our production system has lot of data . i tried in test system it worked fine
i checked the cube for compression and indices in production , they look fine
can anyone think of anything that could have gone wrong ? also did rsrv tests ..
but all come green
we have not done any developments on this cube , however we have shifted to
a new hardware in the past month . can anyone think of any reasons ?
anything that can help me catch the issue ? all suggestions welcomeNot sure,
Are you saying that you need both the counts seperately? or a combined count?
how are you joining alpha and beta tables? what is the join condition?
you need to do something like this,
SELECT COUNT(CASE WHEN
(A.col1 = 'Pete' AND SUBSTR(A.col2,,1,12)=SUBSTR(B.col2,,1,13))
OR ( A.col1 != 'Pete' AND SUBSTR(A.col2,,1,15)=SUBSTR(B.col2,,1,15))
THEN 1 ELSE 0
END)
FROM alpha A, beta b
WHERE alpha.join_cloumn= beta.join_columnG. -
Safari will not display some media content despite Flip4mac loaded
As the subject indicates, Safari will no longer display some media content after installing Flip4mac. Where that media content would normally display all I see is a square with the Quicktime logo in the middle and a question mark in the middle. For example see the Dakar Rally site http://www.raid-live.com/dakar/en/index.shtml#. In my case Safari does not display the Flash content relating to "Premium Offers".
Mozilla displays everything fine though I don't particularly want to move between browsers depending on the on-line content. I'd rather not use Mozilla as in some cases the page appearances aren't as neat as those displayed by Safari.
Is there a way of restoring Safari back to its default settings in order get it to play ball.
Cheers
ChrisAlso a possible explanation is Safari cache files. Safari can be quite stubborn about holding on to these and refusing to let go of a cache file for a page, not showing up-dated content. Since the new user account didn't have any cache files Safari displayed the file correctly there, and used a "bad" cache file in your original account. Even clicking reload doesn't necessarily force Safari to take a new look at the page code. Drives me batty sometimes. If that is the problem you can go to the Safari menu item, choose Empty Cache and try again. I'v had instances though where I had to empty the caches and quit and relaunch Safari to get it to display a page properly.
Another thing to do, to make sure something is a Safari specific problem rather than a system problem, is to download Firefox and try it with a funky page. If the page works in Firefox, but not Safari, you know it is Safari being funny and not your system.
My truck was running rough the other day when I moved it to wash it. Was not looking forward to using it to haul stuff the next day, but when I started it then it worked just fine....
Francine
Francine
Schwieder -
Possible reasons for a repository manager not displayed under KM Content
Hi,
I developed a repository manager and deployed the par file Archive uploader.
Most time after deployment, I can see immediately an instance of the repository manager under KM Content. However, sometimes, when I made some changes to the code, it doesn't appear under KM Content. The deployment log in SYS/global/config/cm/reports shows no error.
I tried to find some log in System Administration - Monitor, but found nothing.
So, could anyone tell me:
1. What might be the reason for the problem that the repository manager cannot display under KM Content after deploying the par?
2. Where can I find the log explaining why my repository manager cannot display?
Thanks,
RayHi Ray,
Deploying a repository manager means a hot KM deployment, which isn't supported at all, see https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/bb1f18be-0801-0010-ffa0-e3495f7401bc and SAP note 894884. After such a deployment, the KM is restarted, but you have some kind of "shadow KM" in memory, which leads for most things to an unpredictable behaviour.
In contrast to the documents reffered to above, also the standard KM delivery from SAP still behaves in an uncontrolled way for many issues.
That's why after a KM hot deployment, you should restart your server if you realize anything "unusual". A workaround is to debug your code and using the hot code replacement feature (which only works in some situations, but that's better than nothing...).
Hope it helps
Detlev -
Internet exlorer 7.0 can not display crm portal content
hi gurus,
we are using crm5.0+ep7.0, we have loaded the portal content (business packages) for crm and crm high tech. the patch level is: 13 level 0 (BBPCRM is 6).
I use portal role channel manager. when we want to display some crm content in portal which runs by explorer 7.0, sap will popup another window and turn into blank with error. the ie error says: object doesn't support this property or method. and the url:http://crmdev.iecsh.com:8000/sap(ZT1PQnhTbWh6Ym01Y0R3M0JqKnQ2R1VRLS10MDlLNjhsU1Z6XzdLTmUqc2RFUjFnLS0=)/bc/bsp/sap/crm_bsp_frame/mainDH.do
while the original window is just continuing displaying the signal: loading.
with ie 6.0, it's ok.
can anyone help me out? thank you very mcuh.Microsoft Internet Explorer 7 as mentioned in SAP Note 981710 this version is not supported by any current NetWeaver Portal / WebAS / ITS / BSP / BEX / CRM Web Application Component......
SAP Strongly recommend to our customers to block this update until this version
This version (IE 7.0) "should be" supported as of SPS19 (NW '04) or SPS10(NW 2004s) and there exist several errors found in the operation on previous releases.
be supported or the SPS be released (this is mentioned on the note), please note that once the system has performed the update there is not possible to go back to IE 6.0
For further information please refer to:
http://www.microsoft.com/technet/updatemanagement/windowsupdate/ie7announcement.mspx
http://service.sap.com/sap/support/notes/981710 -
RSA3 - Extractor seems to run forever for a particluar datasource
Hi All,
I am trying to check a infocube export datasource - 8ZBVOLVOL1 in RSA3 and it seems to run forever and never returns any values. I am using the default values in the settings :
Request Id - TEST
Data records/calls - 100
Display Extr Calls - 10
Update Mode - F
Target Sys - "Empty"
In the selections I am not making any selections just running them as default, but I also tried inputting the selections and even then it seems to run forever.
I checked the datasource in RSA6 and it seems to be fine.
I am hoping someone can help me out here.
Thanks in advance,
RahulHello,
1.First try to execute the InfoPackage and check whether data is loaded to the other InfoCube.
2. If you have anyother generated datasource try the same in RSA3.
3. Check the MySelfSourceSystem (BW System) in Source System -> Check and make sure there is no issues.
If not,try these options
1. Try to recreate the fact table views using the ABAP Report(SE38) SAP_FACTVIEWS_RECREATE
2. Regenerate the datasource again (Export datasource)
3. Goto RSA3 and check it again
Thanks
Chandran -
HT1338 why is my MacBook Air running slow and I bought the 11 inch with all memory and turbo boost
why is my MacBook Air running slow and I bought the 11 inch with all memory and turbo boost
Please answer as many of the following questions as you can. You may already have answered some of them. In that case, there's no need to repeat the answers.
Have you restarted your router and your broadband device (if they're separate) since you first noticed the problem? If not, do that now and see whether there's any change.
If your browser is Safari, then from the Safari menu bar, select
Safari ▹ Preferences... ▹ Privacy ▹ Remove All Website Data
and confirm. Any change?
Quit and relaunch the browser. Any change?
Log out and log back in. Any change?
Enable Private Browsing in the Safari menu. Any change?
Are any other web browsers installed, and are they the same? What about other Internet applications, such as iTunes and the App Store?
If other browsers and Internet applications are also affected, follow these instructions and test. Any change?
If only Safari is affected, launch the Activity Monitor application and enter "web" (without the quotes) in the search box. If a process named "Safari Web Content" is shown in red or is using more than about 5% of a CPU, select it and force it to quit by clicking the X or Quit Process button in the toolbar of the window. There may be more than one such process. Any improvement?
Again, if only Safari is involved, open the iCloud preference pane and uncheck the box marked Safari, if it's checked. Any change?
Are there any other devices on the same network that can browse the Web, and are they affected?
If you can test Safari on another network, is it the same there?
If you connect to your router with Wi-Fi and you can also connect with Ethernet, do that and turn off Wi-Fi. Any difference? -
Hello,
I am using Oracle 10.2.0.4 on RHEL 4u4. I am trying to load a table with data using "Load Data from User Files" in Enterprise Manager (SQL*Loader).
When I run the job, it just runs forever and never finishes. I am only trying to load about 6,400 rows, so I can't imagine it should take very long. I have created a .BAD file, a .DISCARD file, and a .LOG file, but all are empty. I have also been monitoring the alert log, but I don't see anything pertaining to the load in there either. Perhaps I have something incorrect in the control file??
Here's a sample of my data in the flat file:
1*"LAURA,LORA,LAURIE,LAURI,LARA"*
2*"SARA,SARAH"*
3*"JENNIFER,JENN,JEN,JENNI,JENNY"*
And the control file generated by Enterprise Manager:
LOAD DATA
APPEND
INTO TABLE NAMES.NAME_VARIANTS
FIELDS TERMINATED BY '*' OPTIONALLY ENCLOSED BY '"'
COUNTER INTEGER EXTERNAL,
VARIANT_TEXT CHAR
I am unsure how to troubleshoot this as I am getting nothing in either log file!
MimiUpdate. I tried running the control file manually using sqlldr at the command line and it worked just fine. Not sure why scheduling the job through Enterprise Manager didn't work for me. Anyways, problem resolved!
-
Hi ,
When i am running query it is running forever and i am not able to get the results. But , iam able to get the results by using the LISTCUBE transaction very fastly for the same selection criteria.
When I observed in SM66 , The work process is always trying to Read the table /bic/03035
appreciate your suggessions and valuble solutionsHi,
I had the same problem yesterday - the only difference was that SM66 showed a different table name.
My problem was solved by getting the Database team to analyze that particular table. The DB logs showed that the table had been Analyzed a long time back. By getting the table analyzed the execution time for the query was cut down from 15 minutes to 30 seconds.
See if this helps in your scenario as well. The table name that you have given does not appear to be the full table name - enable long text in SM66 to display the table name in full and ask you DB team to check when that table was last analyzed - if it was a long time back then get then to analyze it again and see if it improves the query performance.
Hope it helps,
Regards,
Nikhil -
Why is my Samsung suddenly taking forever to load emails? It has used almost 1 GB of data in two days! All in background data; very little in foreground.
ChinaPanda we'll get you up and running! To clarify, do you have the Galaxy S4 or the Mini? What type of email account do you have? Are you having trouble with other data activities such as browsing the web?
AshleyS_VZW
Follow us on Twitter @VZWSupport
Maybe you are looking for
-
I just purchased camera connecton kit and it will not download video
I just purchased the Camera Connection Kit and it will not download video. Warning comes up stating " the attached device uses too much power"
-
What is the use of the auxiliary pins of 6602 counter card
Hello, I want to know about the Behavior of the auxilliary pins in 6602 counter card.
-
Sub Transaction Type mandatory in J1IEX
Hi, We need to make Sub Transaction Type as a mandatory field in J1IEX. Can anyone provide some idea that how it is possible? Thanks in advance
-
Under Options > Advanced > Hotkeys there is an checkbox called "Toggle Mute (Push to Talk)". Checking this is supposed to enable you to use the hotkey you have set to toggle mute to talk. Previously, I have used it. That was months ago, and Skype ha
-
How to identify last page of a group
Hi reports gurus! I'm trying to have report of employee(table emp) group by department(dept). I want to have 5 employees per page and per departement. A department can have 10 employees. So we'll have 2 pages for this department.For Each page a want