Why do blgs not load properly the first time

Why does it take several "refreshes" to load pages for blogs properly?

It could possibly be an issue with your Firefox Cache. Try [[How to clear the cache|Clearing your Cache]], and see if that makes a difference. Also, [[Websites look wrong]] has some basic troubleshooting you can try.
If that doesn't work, Try to start Firefox in [[Safe mode|Safe mode]]. This mode disables all extensions, user customizations, hardware acceleration, etc. temporarily for diagnostic and troubleshooting. If Firefox works fine in Safe Mode, then this is likely an add-on issue. Restart Firefox in normal mode, then type "About:addons" (without the quotes) in the address bar. Disable your extensions one by one, restarting Firefox between each one, until you find the trouble maker. Once you do, you can disable that add-on and report the issue to that add-on's developer.

Similar Messages

Page does not load for the first time

Hi,
When I enter the URL to load the page, it does not work, i.e I get page not found message. But when I refresh(F5) the page gets loaded. This is just not for the login page but all my report and form pages and this happens only for the first time I try to access in the day. I couldnt understand why it happens? Can someone help me to understand the problem I am facing?
Thanks

What does the appache log says?
Your appache server home > Apache > Apache > logs > access_log.current_date
Denes Kubicek
http://deneskubicek.blogspot.com/
http://www.opal-consulting.de/training
http://apex.oracle.com/pls/otn/f?p=31517:1
-------------------------------------------------------------------

Why aren't Flash cookies cleared the first time I exit Firefox?

I am running XP, Firefox 16.0.1 and Flash Player 11.4.402.287 and have Firefox configured to "Clear history when Firefox closes", with "Cookies" (amongst other options) checked in the "Settings for Clearing History". I also have Flash Player configured to "Block all sites from storing information on this computer."
As I understand things, starting with Firefox 4 and Flash Player 10.3, having Firefox configured this way should cause Flash cookies to be deleted upon exiting Firefox. I also understand that even though I have Flash configured as I do, a list of sites that attempt to plant a Flash cookie will still be recorded in the main settings.sol cookie.
I have noticed, though, that this list of empty Flash cookies is not deleted the first time I exit Firefox; rather, the list is deleted after launching and then exiting Firefox again.
Here's a step-by-step example:
1) Control Panel -> Flash Player -> Storage tab -> Local Storage Settings by Site... button -> confirm that the list is empty
2) Exit the Flash Player Settings Manage
3) Launch Firefox -> go to www.hulu.com and click on a video to start it playing
4) Relaunch Control Panel -> Flash Player -> Storage tab -> Local Storage Settings by Site... button -> confirm that the list shows www.hulu.com, 0 bytes, Block
5) Exit the Flash Player Settings Manager
6) Exit Firefox
7) Relaunch Control Panel -> Flash Player -> Storage tab -> Local Storage Settings by Site... button -> NOTE THAT THE LIST STILL SHOWS www.hulu.com, 0 bytes, Block
8) Exit the Flash Player Settings Manager
9) Relaunch Firefox
10) Relaunch Control Panel -> Flash Player -> Storage tab -> Local Storage Settings by Site... button -> NOTE THAT THE LIST STILL SHOWS www.hulu.com, 0 bytes, Block
11) Exit the Flash Player Settings Manager
12) Exit Firefox
13) Relaunch Control Panel -> Flash Player -> Storage tab -> Local Storage Settings by Site... button -> NOTE THAT THE LIST IS NOW EMPTY
So again my question is - why isn't this list emptied the first time around?

Ok, so I created a new profile and followed the steps I spelled out in my first post several times - each time the Hulu flash cookie was cleared the first time I closed Firefox.
So what would you recommend I do next to get to the bottom of the behavior in my current profile? Should I go about disabling my extensions and plugins one by one and repeating the test each time?
Thanks again so much for your time and help.
PS: I never have a problem with Hulu playing with my flash local storage set to zero - interesting that you do...

JComboBox - Bottom border is not visible for the first time

JComboBox - Bottom border is not visible for the first time i click on the arrow to drop the list down.
This happens because the list when dropped down goes out of the frame.
If have the increased the size of the Frame then i am able to see it,but i dont want to do this.
I am using jdk1.3.1_02.
Any Help would be great.
Please find the code below.
Thanks,
Sridhar.
//file: Lister.java
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
public class Lister {
    public static void main(String[] args) {
        JFrame frame = new JFrame("Lister v1.0");
        // create a combo box
        String [] items = { "uno", "due", "tre", "quattro", "cinque",
        "sei", "sette", "otto", "nove", "deici",
        "undici", "dodici" };
        JComboBox comboBox = new JComboBox(items);
        comboBox.setEditable(true);
        // put the controls the content pane
        Container c = frame.getContentPane( );
        JPanel comboPanel = new JPanel( );
        comboPanel.add(comboBox);
        c.add(comboPanel, BorderLayout.NORTH);
        c.setBackground(Color.white);
        comboBox.setBackground(Color.white);
        comboPanel.setBackground(Color.white);
        frame.setBackground(Color.white);
        frame.setResizable(false);
        frame.setSize(200, 200);
        frame.setDefaultCloseOperation( JFrame.EXIT_ON_CLOSE );
        frame.setVisible(true);
}

Hello,
try this:JPanel comboPanel = new JPanel(new BorderLayout());Regards,
Tim

Drop down list(JComboBox) - Bottom border is not visible for the first time

Drop down list(Combo-box) JComboBox - Bottom border is not visible for the first time i click on the arrow to drop the list down.
I am using jdk1.3.1_02.
Did any one face this issue.
Please let me know.
Thanks,
Sridhar.

I must be a little confused regarding your question.
You can simply change your code frame.setSize(200, 200); to frame.setSize(400, 400);When you say you are unable to see the border are you specifically talking about the border of the frame or the border of the combo box?
Lance

PROMPT WITH DEFAULT VALUES DOES NOT DISPLAY VALUES THE FIRST TIME

Hi,
With one of our scorecard reports, when you select a division, the leader role/leader prompt picklist values do not get populated the first time. Because this is only happening in reports we have written in house, we do not see this happening to the reports that are installed as default.
Is there any workaround known for this error.
Thanks and Regards

Hey can somebody please let me know how to go about this isssue ..
Thanks

The photos on orkut not loading properly,the loading icon is not functioning

while I am visiting orkut by using mozilla-firefox,it is seen that while I open the photo album of my friend, is not working properly.The loading icon found on the photo is not functioning and the picture seems to be hazy.

Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

Page with PartialTriggers is not working when it loads for the first time

Hi All,
I am experiencing unexpected behavior when using partial triggers and this recurres every time the page loads and the second time it works fine.
Here is the requirement, The page has a check box, when checked, two text boxes should be disabled. When unchecked the two fields should be enabled.
(The fields are Start Date Time and End Date Time in the code below). I am also handiling the Date Validations on value change listener of Start Date time and have no issues on that.
When I try to enter the dates on page load (The check box - "Process Full Indicator" is not selected), I enter the required fields (PEID, Dates and check the Process IAF and Process SMS check boxes and click on the ProcessRFI Button, the date fields are emptied and nothing happens. When i redo the same thing the second time, it works.
The button invokes a BEPL process.
One of the links suggested that I use the partialTrigger tag in the parent layout, I used in the panelFormLayout and it sill did not reflect.
I am facing the same issue in an other page that is reteriving data from a DB Table. As I notice, both the pages are invoking dataControlls. Not too sure if it is related.
Kindly help.
<af:panelFormLayout id="pfl1"
inlineStyle="font-weight:bold; height:181px;"
>
<af:inputText value="#{bindings.PEID.inputValue}"
label="PEID"
required="#{bindings.PEID.hints.mandatory}"
columns="#{bindings.PEID.hints.displayWidth}"
maximumLength="#{bindings.PEID.hints.precision}"
shortDesc="#{bindings.PEID.hints.tooltip}" id="it1"
inlineStyle="font-weight:bold;">
<f:validator binding="#{bindings.PEID.validator}"/>
</af:inputText>

<af:inputDate value="#{bindings.StartDateTime.inputValue}"
label="Start Date Time"
shortDesc="#{bindings.StartDateTime.hints.tooltip}"
id="id1" inlineStyle="font-weight:bold;"
binding="#{backing_ProcessRFI.input_startDate}"
valueChangeListener="#{backing_ProcessRFI.assignFromDateValue}"
autoSubmit="true"
required="true" immediate="true">
<f:validator binding="#{bindings.StartDateTime.validator}"/>
<af:convertDateTime pattern="#{bindings.StartDateTime.format}" type="both"/>
</af:inputDate>
<af:inputDate value="#{bindings.EndDateTime.inputValue}"
label="End Date Time"
shortDesc="#{bindings.EndDateTime.hints.tooltip}"
id="id2" inlineStyle="font-weight:bold;"
binding="#{backing_ProcessRFI.input_endDate}"
partialTriggers="id1"
required="true"
valueChangeListener="#{backing_ProcessRFI.checkNullStartDateValue}"
autoSubmit="true" immediate="true">
<af:validateDateTimeRange minimum="#{backing_ProcessRFI.dtFromDate}"
hintMinimum="End date should be greater than the Start Date"
/>
<f:validator binding="#{bindings.EndDateTime.validator}"/>
<af:convertDateTime pattern="#{bindings.EndDateTime.format}" type="both"/>
</af:inputDate>
<af:selectBooleanCheckbox value="#{bindings.ProcessIAFIndicator.inputValue}"
label="Process IAF"
required="#{bindings.ProcessIAFIndicator.hints.mandatory}"
shortDesc="#{bindings.ProcessIAFIndicator.hints.tooltip}"
id="it2"
inlineStyle="font-weight:bold;">
<f:validator binding="#{bindings.ProcessIAFIndicator.validator}"/>
</af:selectBooleanCheckbox>
<af:selectBooleanCheckbox value="#{bindings.ProcessSMSIndicator.inputValue}"
label="Process SMS"
required="#{bindings.ProcessSMSIndicator.hints.mandatory}"
shortDesc="#{bindings.ProcessSMSIndicator.hints.tooltip}"
id="it5"
inlineStyle="font-weight:bold;">
<f:validator binding="#{bindings.ProcessSMSIndicator.validator}"/>
</af:selectBooleanCheckbox>
<af:selectBooleanCheckbox value="#{bindings.ProcessFullIndicator.inputValue}"
label="Process Full Indicator"
required="#{bindings.ProcessFullIndicator.hints.mandatory}"
shortDesc="#{bindings.ProcessFullIndicator.hints.tooltip}"
id="it4"
inlineStyle="font-weight:bold;"
binding="#{backing_ProcessRFI.processFullIndicator}"
valueChangeListener="#{backing_ProcessRFI.handleFullIndicator}"
autoSubmit="true">
<f:validator binding="#{bindings.ProcessFullIndicator.validator}"/>
</af:selectBooleanCheckbox>
<af:panelStretchLayout id="psl1" inlineStyle="height:40px;">
<f:facet name="center">
<af:panelGroupLayout layout="horizontal"
xmlns:af="http://xmlns.oracle.com/adf/faces/rich"
id="pgl2">
<af:commandButton actionListener="#{bindings.ProcessRFI.execute}"
text="Process RFI"
disabled="#{!bindings.ProcessRFI.enabled}"
id="cb2"
attributeChangeListener="#{ProcessRFI.processResult}"/>
<af:resetButton text="Clear" id="rb1"/>
<f:facet name="separator">
<af:spacer width="10" height="10" id="s2"/>
</f:facet>
</af:panelGroupLayout>
</f:facet>
</af:panelStretchLayout>
</af:panelFormLayout>

Hi John,
My page is not a part of a task flow. The whole app is an Admin app comprising of multiple individual pages navigated using Menu.
I have tried to run this page individually on my local machine as well as when deployed on the WLS server. The behavior is the same.
Kindly advice,
Thanks,
Ram

New Mac Mini. Can not boot for the first time.

Hello Mac to all the mini community. I recently buy a mac mini and it is not able to boot for the first time.
The only progress is the apple logo, the grey screen and the loading circle.
I was able to boot in safe mode by holding the power button and plug the power cord and i saw the following message:
'Unable to find driver for this platform: \ACPS\.\n'0/sourcecache/.....
debugger called <panic>
can't perform kext scan: no kext summary
OSD process name correspondling to current threat: unknown
MAC OS Version:
Not yet set
Kernel Version:
Orvin Kernetl Version 11.0.1....
So can you please provide any feedback on how to reslove the issue?
Thanks in advance

A new Mac should already have OS X installed on it and boot right up .....?
Mac Pro & Mac mini Fast Start: The new user's guide to the Mac
You should be able to open the box, plug in the power cord, your Display, Keyboard and Mouse, push the power button and start using it.
If not, then you need to return it or exchange it for one that works properly.

Buttons are not displayed for the first time when drawImage method is used

Hi
In my swing window 2 buttons are there and when clicking these buttons, it should display an image . The two buttons are displayed at the first time and I can click on it . While clicking a button , the corresponding image is also got displayed. [ I am using drawImage() function for it] But what the problem is, then the two buttons are not displayed and it will be displayed again when the mouse moves along the position of these two buttons. And this problem occurs only at the first time..When they are on the window on a second time, they won't vanish when the image is displayed when clicking it. Is this the problem with paint() method?. I am using start() method also.
Please help me!
Thank You

Hi
This is not my exact program, that has a large no: of code. So I am putting here a sample one. One thing I would like to point out is that , I can see the buttons at the time of loading the applet and suddenly it vanishes and the image is drawn. Then if I move the mouse along the position of these buttons , they got displayed.
import java.awt.*;
import javax.swing.*;
/*<applet code = MyClass width = 500 height = 500>
</applet>
public class MyClass extends JApplet
Image img;
JButton b1,b2;
Container cp;
Canvas1 cv;
class Canvas1 extends JPanel
public void paint(Graphics g)
super.paint(g);
g.setColor(Color.black);
g.fillRect(0,0,500,500);
img = getImage(getCodeBase(),"image1.jpeg");
g.drawImage(img,20,20,this);
public void start()
cv = new Canvas1();
cv.setBounds(0,0,500,500);
cp.add(cv);
public void init()
setLayout(null);
cp = getContentPane();
b1 = new JButton("Button1");
b1.setBounds(1,1,100,30);
cp.add(b1);
b2 = new JButton("Button2");
b2.setBounds(200,1,100,30);
cp.add(b2);
It would be very helpful to me if you could fix the problem.
Thank You.

TS1398 Just got the mini, specifically to get jobs on a certain website. Jobs change all the time. When I go to website, it has not updated from the first time I logged in on the mini. It works on my laptop just fine. HELP!

My sons just bought me an ipad mini especially so that I could check a certain website on which I sign up for jobs throughout the day. The website is updated constantly throughout the day with new jobs and the status of the jobs I already have accepted and worked on. (It shows the percentage of the job that has been done.) It worked fine only the first time I logged on with the mini. Since then (yesterday,) when I check the website, it lets me log in, but I only see the same exact information that was there the first time I went to the website using the mini. It seems to be 'frozen' on that particular first look. It doesn't update at all.
I know it is not updating because I have also been checking with my notebook computer and with the notebook, the website is up to date.
Maybe its Safari?
I had the same problem when I used a friend's iPad.
I wonder if there is a setting or something that I could change to allow the website to update to the time I check it.
If not, then the ipad mini is a terrible disappointment and I would like to return it.
If you can help me, I would be extremely grateful.
Thanks in advance...

This issue can be caused by corrupted cookies or cookies that are blocked.
*check the permissions on the about:permissions page and in "Tools > Page Info > Permissions"
Clear the cache and remove cookies only from websites that cause problems.
"Clear the Cache":
*Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Firefox/Tools > Options > Privacy > "Use custom settings for history" > Cookies: "Show Cookies"
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
*Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
*Do NOT click the Reset button on the Safe Mode start window
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

My ipad won't turn on. Have tried to reset by pressing the two button at the same time. It work. Why is this happening? For the first time it happened to me after using the ipad 4 running on ios 7, for almost a year and a halftime

My ipad won't turn on. Tried to reset and it work. I'm using ipad 4 with ios 7 and this is the first time that this happened to me.what is wrong with the ipad?

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

How to clear all data when the form loading at the first time

hi
I am using JDevloper 10g and I have adfForm page, I want to clear all data when I load the page for the first time.
When I did it using RefreshCondition on the pageDef in the executables like(
<executables>
<iterator id="FinCompaniesInformaton1ViewIterator" RangeSize="10"
Binds="FinCompaniesInformaton1View"
DataControl="AppModuleDataControl" *RefreshCondition="#{adfFacesContext.postback==true}"* />
</executables>
the form didn't bring any data but the problem is the field in the form at the run time changed to read only. So how to make it inputText and clear the data inside it at the run time
best regards
Tarek Al Soudani

thank you for your help,my spec is I have ADF Form and I have creat and Edit CommandButton I made it befor also Commite to save.
so when I run the form the Field should be disabled and there are no data inside it,and when I chose the creat button the fields should be enabled and I have to insert data inside it then I save.
So I have FinCompaniesInformatonView as view object based on entity object name FinCompaniesInformaton and applicationMoudul.
I tolde you befor that I made refreshcondition to solve the data clearence problem but the field changed to read only so please if you now any way to leave the fields as inputText whitout make the form as creation form
beast regards

Pr Pro CC 2014 not startup (for the first time)

Premiere CC 2014 wil not startup on my iMac. (for the first time)
It shows:
" Adobe Premiere Pro coult not find any capable video play modules. Please update your video display drivers and startup"
My iMac:
O.S. 10.9.5
3,5 GHz i7
32 GB 1600 MHz DDR3
Video:
NVIDIA Geforce GTX 780 m 4096 MB
I foud a CUDA driver:
version 6.5.18
What to do?

Hi,
Please go this location on your computer:
Click on Go on the top- Go to folder- Type ~/library then go to application folder- rename the adobe folder to old adobe
go back to ~/library then go to preferences and rename the adobe folder to old adobe
go to documents and rename the adobe folder to old adobe.
After doing this you will loosed your synced settings and customized keyboard short cuts and effects if any.
Thank You
Arjun

HT201272 How do I re-download a tv show that didn't download properly the first time?

i purchased a copy of Downton Abbey Season 3 and the first episode did not download properly. It's showing already downloaded and isn't letting me re-download. How do I get this episode into my library?

If you are looking at the Purchased link under Quicklinks on the right-hand side of the iTunes store homepage then deleting the incomplete version from the TV Shows part of your library (i.e. where you would click on it to play it) should change it from 'Downloaded' to have the cloud symbol against it for redownloading.

Why do blgs not load properly the first time

Similar Messages

Maybe you are looking for