Why do computers change the list they are in?

I have created several list of computers in ARD 3.4. Several computer names change the list they are in in. Each mac has a unique share name. I cannot figure out why they would change list. Any one that has any suggestions please help. Thank you in advance.

Are they smart lists, or regular lists?
This sounds like buggy behavior to me, which is not unheard of in ARD. Perhaps try deleting your clients and re-adding, although I know that's a pain if you have more than a couple dozen Macs.

Similar Messages

  • I am new to Final Cut Express and don't understand why I am unable to drag transitions into Canvas? Something wrong in my setup? It's not the overlays they are "on" so can anyone advise me please?

    I am new to Final Cut Express and don't understand why I am unable to drag transitions into Canvas? Something wrong in my setup? It's not the overlays they are "on" so can anyone advise me please, by the way the "L" doesn't appear in the bottom left hand corner either? and by the way how can I get rid of that irritating Blue badge saying "AutoFill your contact details" all mine are in "address book" already!

    You can't drag a transition into the canvas. If you're dragginmg a transition from the effects tab you drag it between the edit point of two clips in the timeline.
    Make sure show edit overlays is turned on in the Canvas view popup.

  • Why are the factory apps placed in the slots they are in when the phone is factory, what is the significance of their assigned spots

    Does anybody have any idea on why the stock/factory apps are placed in the dock and springboard in the slots they are when you do a full restore?

    the best answer anyone here can give is "Because that's what Apple decided."
    beyond that, nobody here knows.

  • I use premiere and cannot access all of the transitions, they are grayed out. Why is this?

    I use premiere and cannot access all of the transitions, they are grayed out. Why is this?

    Maybe you have them "filtered" at the top of the FX Window (Icons)

  • Composed looks / Change the look themes are missing when creating site from saved template

    Hi,
    I found an issue when save you own site template and then want to create a new site from that template the "Change the Look" themes are missing and if you go to site settings, Comosed looks where the themes are stored is empty! Anyone else has
    the same experience? Any workaround for this?
    regards
    Martin

    I've just seen this exact problem on a SharePoint 2013 farm as well this morning, but have managed to fix the blank "Composed Looks" list issue, although am still working on the "Change the look" wizard pages.
    Edit: found a fix for this too now. See my next post below.
    It appears that the process of saving a site as a template and then creating a new site from that template causes the original XsltListViewWebPart used to display the default view of the "Composed Looks" list, to be replaced with a ListViewWebPart,
    which appears to be broken.
    Edit: have also seen this behaviour on sites created from the built-in templates but haven't determined exactly whether this is a bug. ULS logs never show any errors when this occurs so it appears to be "by-design". Ugh.
    There may be a tidier way to fix this, but for now, I used SharePoint Designer 2013 to copy an XsltListViewWebPart from a working "Composed Looks" list, AllItems.aspx page and replaced the ListViewWebPart in the broken Composed Looks list, AllItems.aspx
    page with it. There is also some additional post copy-paste tidy up to do on the pasted-in XsltListViewWebPart HTML to get it to work within the context of the site it is now in as it will contain GUIDs and URLs that are only relevant within the site
    that you copied it from and these need to be replaced with the GUIDs/URLs from the replaced ListViewWebPart - paste it in a notepad session before deleting/overwriting it so you can grab those bits.
    I'll write a more detailed step-by-step if anyone wants it, but this doesn't seem to fix the broken "Change the Look" wizard still, only the "Composed Looks" list default view. I'll look into that now and post back more complete solution if I can
    find a fix.
    Edit: Found a fix. see my next post below.
    Edit Edit: One more thing - on some Composed Looks lists we are seeing empty lists once the default view webPart is fixed up. To correct this, you can copy selected Composed Looks from a working site with a full set.
    Before you do that, edit the default view in both the source and destination Composed Looks lists and include the Title field as it is a required field.
    Then, you can use Datasheet View (just click the edit list link to put it in Datasheet View mode) to bulk copy/paste Composed Looks between the source and destination lists.
    Do a little post-paste tidy up on the URLs as above to make sure that they are correct for their new location and then click on over to your Change the Look wizard.
    You should see all of your Composed Looks displayed nicely on the page.
    Note that the Current Look might not represent the sites actual appearance as it's settings will reflect the source sites appearance, but you can tweak it with the Wizard now.
    Regards,
    Glenn
    Can you confirm your sharepoint patch level?

  • How can I transfer photos in an iphoto album to a usb in the order they are in the album?

    I just got a digital photo frame and want to transfer pictures from an iPhoto album in the order they are in the album. When I try and move them to a usb or card they are rearranged according to the number of the photo. How can I transfer them in the order they should be for an album or slide show?

    Here's one (of several) way(s) to do what you want:
    Make an Album of the photos, then drag the pics into your preferred order.
    Then Photos Menu: Batch Change -> Set Title to Text "John's Birthday", for instance, and tick the box to append a number to each Photo. Now your photos are titled 'John's Birthday 001, John's Birthday 002 ... etc'
    Then File -> Export and in the Export dialogue set the Filename to "Use Title"
    Sort on Filename in the FInder and you end up with a folder full of images in the same order as the Album in iPhoto.

  • IPod updates 2 touch with the new software, and from the update they are not connected with Time phase. They appear calling but never they enter the calls. I make calls with other users and if one connects but in these two not from the update

    iPod updates 2 touch with the new software, and from the update they are not connected with Time phase. They appear calling but never they enter the calls. I make calls with other users and if one connects but in these two not from the update

    I use Firefox 95% of the time, and there's no problem with flash content (and I'm still at .55 - downloaded .64 last week but I haven't got round to making the change yet). At the rate they've been changing it recently it may well be out of date already .
    I've been trying it in Safari, too with no problems apart from You Tube, but that's because I'm blocking Google cookies.
    One thought does occur - if your Flash preferences are set to block all Local Storage, it may be that the problem site is trying to use Flash cookies (LSOs). I had this problem recently with the BBC iPlayer streaming content. Little Snitch notified an attempt to connect to a new URL - emp.bbci.co.uk.
    If I disallowed it, no streaming; when I allowed the connection, it still wouldn't stream, so I did a bit of digging and came to the conclusion that it was trying to set a Flash cookie. When I unblocked, lo and behold - streaming resumed as normal.
    I now have LSOs blocked in a more subtle way that lets the site think it's being set (but it ain't) and the streaming still works.
    As for permissions repair - always repair from local; the permissions on the original disc will have been superceded by updates and new installations of Apple software.
    DU needs to be reading the packages on the HD, not the (now out of date) install disc.
    The recurring repair messages are normal and don't mean anything's wrong. As long as the final message is 'repair complete' there's no need to dwell on it.
    http://support.apple.com/kb/TS1448 (for Leopard and Snow Leopard - Lion no doubt has it's own set).

  • HT201303 I want to change the email you are sending confidential answer him

    I want to change the email you are sending confidential answer him                                  

    first of, if you also don't remember the alternate email you have registered it to, the only available option is:-
    you can only reset/update them (security questions) by CALLING the apple support team..
    don't worry, they are very polite and friendly.. =))
    all u need to do is verify their questions..
    BUT
    (1) make sure you don't signed out of your apple ID;
    (2) prepare you apple device’s serial number;
    and also,
    (3) be sure you are connected to the internet, so that u can help the speed up the "verifying" process..
    it only took less than 20minutes to have my security questions reset without losing the balance in my apple ID ^__^
    hope this helps.. merry christmas y'all ~.~

  • Oracle insert problem(records not in the order they are inserted)

    hi, all:
    I tried to insert a word list into a oracle table, everything is fine except that the words are not in the order they are inserted. For example, the words are inserted in the following sequence:
    accreted     
    accreting     
    accretion     
    accretionary     
    accretive     
    bladebone
    bladed     
    bladeless
    bladelike
    When I retrived the resultset from the table and iterate through each of the record, the words are not in the order inserted, i.e., it may look like this,
    accreted     
    accreting     
    bladebone
    bladed     
    accretion     
    accretionary     
    accretive     
    bladeless
    bladelike
    This strange phenomenon won't happen when the word list is small, like 500 words or so, but when the number of words reaches around 10,000, it takes place. My coworker also experienced this problem when trying to insert large volume of data into oracle table.
    The code I used to insert into the DB table:
    BufferedReader reader=new BufferedReader(new FileReader("C:\\Dictionary.txt"));
    while( (line=reader.readLine())!=null )
         sql="INSERT INTO DICT " +
         "VALUES ('" + line +"')";                         
         statement.executeUpdate(sql);
    Any advice will be highly appreciated,
    thanks

    Well, the best thing to do is follows scsi-boy's advice and add the additional column and either put a sequence number in it from the Java side as you insert, or use an Oracle sequence object to put a sequence number in it from the Oracle side (which is sort of like an auto-generated value, but different).
    Note that an Oracle sequence generates numbers in sequence, but possibly with gaps (usually if the database is rebooted), unless you do some things that slow sequences down substantially. Sequences can also be something of a bottleneck on RAC clusters. See:
    http://www.dizwell.com/oracle/articles/autonumbering.html
    However, if your coworker is commiting after each and every insert (which is bad form and slows the database down, -10 points), and if your coworker is also never ever ever updating the columns after they've been inserted, and if your coworker is using Oracle 10g and not some older version such as 9i, then your coworker could use the ORA_ROWSCN pseudo-column to order by. Those are very very severe constraints and you shouldn't begin to consider doing it that way without a very good reason, and right now you and your coworker wouldn't know a good reason if it snuck up and bit you on the butt, you've got a lot of learning the basics first.

  • Primarily using the ipad air as an art portfolio but photos i upload in order get rearranged. other than changing the date they were shot, is there any solution to this? can they be reorganized in iphoto on the ipad?

    primarily using the ipad air as an art portfolio but photos i upload in order get rearranged. other than changing the date they were shot, is there any solution to this? can they be reorganized in iphoto on the ipad?

    You are welcome.
    Sorting and organizing photos on IOS devices is one of the things that really need to be improved. It looks like the developers simply did not expect the users to want to keep large photo libraries on an IOS device, where the ordering would matter. I'd send feedback to the developer team, so that they see, what the users want and need:
    You can use this form:  Apple - iPhoto - Feedback

  • Change the Credit control area with balances

    Hi,
    The requirement is there are two credit control areas, XX10, XX12. Now they want only one credit control area ie  XX12,( all customers which are in XX10, should be now with XX12 credit control area) but when  changing the credit control area of a particular customer from  XX10 to XX12, the credit limit and exposure is not displayed in new credit control area. ( Tcode Fd32)
    How can we upload all customers and balances to new Credit control area.
    Thanks
    SM

    Hi
    Please see note 335295 which can help you
    with kind regards
    Cora

  • Hi, I have a problem with fonts because in the window I can't see the font, they are transparent. how can I fix this?

    Hi, I have a problem with fonts because in the window I can't see the font, they are transparent. how can I fix this?

    giadad,
    It sounds as this issue:
    Open System Preferences and go to Accessibility. Next, select Display from the source list along the left, then check the box labelled Reduce transparency.
    It was first presented in this post #15 by TheUlser:
    https://forums.adobe.com/message/6854594#6854594
    It has been described on this Adobe page:
    http://capitalmacservice.com/font-preview-working-illustrator-cs-5-yosemite-fix/

  • Shared objects update the things they are bound to

    Shared objects (my_so) don't seem to be update the things they are bound to
    <mx:Button toolTip="{(my_so.data.wantMusic)?'Turns off music':'Turns on music'}"
                   id="musicOn"
                   icon="{(my_so.data.wantMusic)?imgPlayClass:imgPlayOff}"
                   >
    When my_so.data.wantMusic changes the icon doesn't change

    I've also done the following:
                    private var my_so:SharedObject;
    maybe I also need to make the   my_so.data bindable as well so that the
    following code works as well?
    <mx:Button toolTip="{(my_so.data.wantMusic)?'Turns off music':'Turns on
    music'}"
                   id="musicOn"
                   icon="{(my_so.data.wantMusic)?imgPlayClass:imgPlayOff}"
                    cornerRadius="9" fillAlphas="[1.0, 1.0]"
    fillColors="[#0FEFBD, #7106D5]" width="26">
            <mx:click>
                    <![CDATA[
                        my_so=SharedObject.getLocal("mediaCenter");
                        if (my_so.data.wantMusic)
                            stopIntroSound();
                            my_so.data.wantMusic=false;
                            my_so.flush();
                        else
                            playIntroSound();
                            my_so.data.wantMusic=true;
                            my_so.flush();
                    ]]>
                </mx:click>
        </mx:Button>
    best wishes
    Nikos

  • I have my mac pro with the keyboard in spanish and i didn't knew that it was going to be a big problem because i can't use the key pads the way they are printed, how can i use them the way they r printed?

    i have my mac pro with the keyboard in spanish and i didn't knew that it was going to be a big problem because i can't use the key pads the way they are printed, how can i use them the way they are printed?

    why can't you use the keyboard the way it is printed?

  • Why do we change the user group when doing LSMW?

    Hi experts,
    I just wanted to know why do we change the user group Tcode SU3 when we are doing upload of data using LSMW?
    Thanks,
    JEss.

    As Rajesh suggested if you are uploading data for action in which infotype group is based on User Group then you need to change User group.
    Otherwise there is no need to change user group for using LSMW.
    Rgds,
    Lata

Maybe you are looking for