Why do holidays appear more than once?
Why do holidays appear more than once?
I have the new iPad and iPhone 5
both run on ios 6
I have multiple holiday calendars on both devices
Step 1: delete your gmail account and calendars go away
Step 2: DELETE your icloud account under setting on iphone and select also delete on iphone
Step 3: add Gmail and Calendar by following directions below (you will NOT get multiple google calendars)
Step 4: go back under setting and sign up for icloud again and turn everythin you want on, ON, even Calendar
You are done, no multiple calendars
**I struggled for a week with this issue and researched online and tried other methods such as unchecking default Birthday icloud calendar, hard reset, uncheck holidays in Gmail, on iphone, none of it worked.....what worked were Steps 1-4 above!!!!)
My iphone 5 is perfect now..no 20 of the same holidays in one day!!!
By the way if you want multiple Google calendars to show up do it this way:
First of you are a gmail user, do NOT use the default gmail sync option if you want ALL of your calendars from Google to show up, multiple colors etc); use MS Exchange, server address is m.google.com
Then go to m.google.com/sync to sync your iphone calendar ON YOUR IPHONE BROSWER, you check mark the calendars you want
Presto, your Google calendars -- all of them -- show up
Similar Messages
-
Why same fields appearing more than once in a Table like EKPO , KNA1 ???
hi ,
in SAP IDES version u will see :
In EKPO table : Two fields MATNR and EMATNR having same spec. and
showing same redundant data in IDES version .
IN KNA1 table : NAME1 field appears twice ...
why so ? any utilities / Reason ????HI,
kna1 is customer master table.
now 1 customer can have 2 names like 1 official and one nick name or 2 persons or brothers who are given only 1 customer no kunnr by their vendor.
these things are done by seeing all the business scenarios.
now in table EKPO
MATNR IS PRODUCT NO
EMATNR IS MATERIAL NO.
now there is a difference between product and material.
a material can be a raw material semi finished or finished good,but a product is always a material which is been purchased through the purchase order from the vendor.
the matnr is essentially the final stage of the product by the vendor.
in many cases these contain same data but there are a lot of cases when these things worry.
if you have accesss to your production system then you can check there.
thanks
reward if helpful
vivekanand -
Why does 1 cd appear more than once on the ipod
Hi
I have a Classic ipod and use Windows 7; I have a couple of items which are appearing more than once on the ipod but only once on the laptopHi rhduff,
Welcome to the Support Communities!
The following article will help you with this.
Follow the instructions to manually sync your iPad, and remove any songs that you don't want.
iTunes 11 for Mac: Set up syncing for iPod, iPhone, or iPad
http://support.apple.com/kb/PH12113?viewlocale=en_US
I hope this information helps ....
Have a great day!
- Judy -
'PortfolioBacklogs' cannot appear more than once if content model type is "all"
I'm trying to add another level above feature and have followed these instructions https://msdn.microsoft.com/en-us/library/dn217880.aspx
The project is setup as scrum not agile, maybe that is why???, but I get the following error:
'PortfolioBacklogs' cannot appear more than once if content model type is "all"
and haven't been able to find where to change the content model type.Hi Dckennedy1,
Thanks for your post.
What’s the version of your TFS? TFS 2013 Update 4? Your current team project created using default Scrum 2013.4 process template? After which step you received this error? You can share your error screenshot(s) here.
I created a new Scrum 2013.4 template team project in my TFS 2013 Update 4 Server, and followed the steps in that document to add Initiatives work item type in my TFS Web Access, the Initiatives work item type be added into portfolios successfully, you can
refer to the below screenshot:
The only difference with steps in that document is I edited the PortfolioBacklogs section as below in my ProcessConfiguration.xml file.
<PortfolioBacklog category="MyCompany.InitiativeCategory" pluralName="Initiatives" singularName="Initiative">
<States>
<State value="New" type="Proposed" />
<State value="In Progress" type="InProgress" />
<State value="Removed" type="InProgress" />
<State value="Done" type="Complete" />
</States>
<Columns>
<Column refname="System.WorkItemType" width="100" />
<Column refname="System.Title" width="400" />
<Column refname="System.State" width="100" />
<Column refname="Microsoft.VSTS.Common.BusinessValue" width="50" />
<Column refname="Microsoft.VSTS.Scheduling.TargetDate" width="100" />
<Column refname="System.Tags" width="200" />
</Columns>
<AddPanel>
<Fields>
<Field refname="System.Title" />
</Fields>
</AddPanel>
</PortfolioBacklog>
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Ld: warning: option -z[defs|nodefs] appears more than once
Wondering, why I get this warning, as soon as I try to link with -xipo. E.g:
cc -zdefs -Bdirect -m64 -L/export/scratch/elkner/build/root4build/usr/lib/amd64 -L/usr/sfw/lib/amd64 -xipo -xO4 -G -h libgif.so.4 -o .libs/libgif.so.4.1.6 .libs/dev2gif.o .libs/dgif_lib.o .libs/egif_lib.o .libs/gif_err.o .libs/gif_font.o .libs/gif_hash.o .libs/gifalloc.o .libs/qprintf.o .libs/quantize.o -lX11
ld: warning: option -zdefs appears more than once, first setting taken
Actually I can't see a second -zdef|-znodef and -## doesn't show a 2nd one either.
So is this a compiler bug?
Regards,
jel.Version is SS with latest patches applied:
cc: Sun C 5.10 SunOS_i386 Patch 142363-03 2009/12/03
Strange - for some unknown reasons, ipo seems to add -znodefs -zmuldefs :
cc -xstrconst -fsimple=1 -xlibmil -xlibmopt -m64 -xarch=sse3 -xdepend -xO4 -I/export/scratch/elkner/build/root4build/usr/include -I/usr/sfw/include -xipo -xvector=simd "-#" -zdefs -Bdirect -o gif2epsn gif2epsn.o ../lib/.libs/libgif.so ../lib/libgetarg.a
### cc: Note: NLSPATH = /usr/share/locale/%L/LC_MESSAGES/%N.cat:/usr/share/locale/%L/LC_MESSAGES/%N.cat:/local/apps/sunstudio12.1/prod/bin/../lib/locale/%L/LC_MESSAGES/%N.cat:/local/apps/sunstudio12.1/prod/bin/../../lib/locale/%L/LC_MESSAGES/%N.cat
### command line files and options (expanded):
### -xstrconst -fsimple=1 -xlibmil -xlibmopt -xarch=sse3 -xdepend=yes -xO4 -I/export/scratch/elkner/build/root4build/usr/include -I/usr/sfw/include -xipo=1 -xvector=simd -# -zdefs -Bdirect -ogif2epsn gif2epsn.o ../lib/.libs/libgif.so ../lib/libgetarg.a
/local/apps/sunstudio12.1/prod/bin/ipo -phase2 -# -level=1 -ir2hfpath /local/apps/sunstudio12.1/prod/bin/ir2hf -ubepath /local/apps/sunstudio12.1/prod/bin/ube -fbepath /local/apps/sunstudio12.1/prod/bin/fbe -iroptpath /local/apps/sunstudio12.1/prod/bin/iropt -ipo_ldarg_start /usr/ccs/bin/ld /local/apps/sunstudio12.1/prod/lib/amd64/crti.o /local/apps/sunstudio12.1/prod/lib/amd64/crt1x.o /local/apps/sunstudio12.1/prod/lib/amd64/values-xa.o -zdefs -Bdirect gif2epsn.o ../lib/.libs/libgif.so ../lib/libgetarg.a -o gif2epsn -Y "P,/local/apps/sunstudio12.1/prod/lib/amd64:/usr/ccs/lib/amd64:/lib/64:/usr/lib/64" -Qy -lmopt -lc /local/apps/sunstudio12.1/prod/lib/amd64/crtn.o -ipo_ldarg_end
/usr/ccs/bin/ld /local/apps/sunstudio12.1/prod/lib/amd64/crti.o /local/apps/sunstudio12.1/prod/lib/amd64/crt1x.o /local/apps/sunstudio12.1/prod/lib/amd64/values-xa.o -zdefs -Bdirect gif2epsn.o ../lib/.libs/libgif.so ../lib/libgetarg.a -Y "P,/local/apps/sunstudio12.1/prod/lib/amd64:/usr/ccs/lib/amd64:/lib/64:/usr/lib/64" -Qy -lmopt -lc /local/apps/sunstudio12.1/prod/lib/amd64/crtn.o -o /dev/null -znodefs -zmuldefs
### Note: __IPO_LD_FILE_=/tmp/ipo_fAAAErayNZ
### Note: SGS_SUPPORT_32=/local/apps/sunstudio12.1/prod/bin/../lib/ipo/ipo_ld_support.so
### Note: SGS_SUPPORT_64=/local/apps/sunstudio12.1/prod/bin/../lib/ipo/amd64/ipo_ld_support.so
ld: warning: option -z[defs|nodefs] appears more than once, first setting taken
### ---- Invoking iropt for all files
/local/apps/sunstudio12.1/prod/bin/iropt -xipo=1 -F -od /tmp/ipo_dBAAFrayNZ /tmp/old_iCAAGrayNZ -o /tmp/ipo_iGAAKrayNZ -is /tmp/ipo_aFAAJrayNZ -a /export/scratch/elkner/build/giflib-4.1.6/util/gif2epsn.o -Qy -O4 -fstore -xarch=sse3 -m64 -xchip=generic -xcache=generic -fsimple=1 \
-fstore -depend -xbuiltin=%none -xlibmopt -xprefetch=auto,explicit -xprefetch_level=1 -xprefetch_auto_type=%none -xvector=simd -F
rm /tmp/ipo_fAAAErayNZ
rm /tmp/namelEAAIrayNZ
....So probably anannoying bug? -
Messages receive appear more than once in my mailbox
The problem is the messages that i receive appear more than once and it keep doing this.
Its like they were cloning or multiplicand, I have until 8 messages of the same thing and this thing continuous happening.
What can I do?, i all ready try the suggestions in the support area in apple, but this does not works with my problem.
I even think that cold be a virus.
Any suggestions will be very appreciate.
ThnaksPlease, try to provide as much information as possible, instead of as little as possible. What’s the time interval chosen in the Remove copy from server popup menu?
It looks like Mail has lost track of which messages have already been downloaded and is downloading them again, or maybe it’s failing to remove them from the server according to your settings.
Try to remove from the server all the messages that have already been downloaded by clicking the Remove now button -- check for new mail first, just in case there is something amiss and that function doesn’t work as expected.
If Preferences > Accounts > Advanced > Remove now fails to remove the messages from the server, you can try to do so manually using the Account Info window. In order to use that feature, choose Get Info (⌘I) from the Action menu (gear icon) located below the mailboxes list in the main Mail window. -
Error: An attribute cannot appear more than once in the same start tag
Hi Everyone,
when i run the page sometimes it works fine but sometimes it throws Compilation Error as below.
"Error(502,1224): file:/C:/Jdeveloper/jdevhome/jdev/myhtml/OA_HTML/fwk/t/Session_2055663493/region1.uix<Line 502, Column 1224>: XML-20124: (Fatal Error) An attribute cannot appear more than once in the same start tag."
And i delete the particular file from the path and run the page so this time it works fine.
But later after sometime i get the same error but the session number will be changed, then again i need to delete it and run.
What can be the permanent solution for this issue?
Plz let me know any suggetions.
Thanks.Seems like the mdl file is corrupted or was not generated correctly.
Can you try to create the mdl file again and then try the import ?
If it doesn't work then try contacting Oracle Support. -
Members from same dim appearing more than once in a record
I have a dimension, "Day of the Week", with each day of the week as a member. My source data has a field for each day of the week. If the flight ( this is an airline flight database ) operates on that day of the week, there is a value, otherwise, its null. Is there a way to load this as is, or will I have to have a record for each day of the week that the flight operates? The Admin guide states "No member from the same dimension can appear more than once in a record", which I think answers my question, but I wanted to throw it out there to see if anyone else has a solution.thanks
So, the days of the week are columns in your data source? That is no problem for a load rule. Normally you tag a column with the dimension it maps to in the cube. In this situation, when you reach the first week, you tag the column with the MEMBER in the day of the week dimension that it maps to.If this doesn't make sense, perhaps you could post the field layout of your file and myself (or someone else) could tell you how to map the columns in the load rule.Regards,Jade--------------------------------------Jade ColeSenior Business Intelligence ConsultantClarity [email protected]
-
Why would aperture load more than once?
I understand that when I first load my RAW photos into Aperture it needs to generate a preview and so that's why it slows down and shows me "loading...". If I want to bypass this I can use quick preview mode. That's how I understood it so far. But I don't understand why it would need to load again at a later time? If I browse elsewhere and come back to this project, it'll start loading again. Does Aperture for some reason deletes the preview?
1) How do I force aperture to generate preview for everything, and not one by one. I'd rather go away and let the computer do its thing for a while than get disturbed every time I hop to the next photo.
You can select all images in the Browser and use the command "Photos > Update/Generate Previews" (Update will turn into "Generate", if hold down the ⌥ alt/options key). This way you can generate the previews over night.
2) Also this still doesn't explain why it needs to be done more than once? Why would it generate the preview again if I haven't changed any adjustments etc?
It will only keep and store the preview permanently, if you have enabled the sharing of previews in the "Preferences > Preview" tab. If you do not enable this, Aperture will not store the previews, to save space. -
Why the "Basic" crawled properties appear more than once for each property name?
When i map a managed property and want to select for example "Basic:9" - i see 2 lines of "Basic:9".
why is that so? are there more than one "Basic:9" property?
keren tsurHi keren,
The properties have different types, Basic:9 which has mapped to Path is Text type, the other one is Yes/No type. You could refer to:
http://technet.microsoft.com/en-in/library/hh134087(v=office.14).aspx
If you would like to know about Crawled property data types, please refer to:
http://blogs.technet.com/b/speschka/archive/2010/08/21/finding-which-crawled-property-data-types-match-a-managed-property-data-type-in-sharepoint-2010.aspx
Regards,
Rebecca Tu
TechNet Community Support -
Heading for Report appearing more than once
Hi All,
I am running a report, the report contain more than 1 lakhs records, how can I avoid the heading of the report to repeat, because as of now heading information is repeating for 50 records.
Please advice how to proceed on this issue.
Thanks,
Mohan Rwrite the code like
top-of-page.
keep page condition..
here write the heading
or
loop at itab.
at first .
here write the heading . This event will trigger only once ;i mean first record of the internal table
endat.
endloop. -
Why Cant I Space More Than Once?
Hi Im a noob at DreamWeaver and for some reason it wont let
me space my words out with more than one space. Is there a way to
be able to space more? ThanksBe aware tht this is definitely NOT a best practice.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"David Powers" <[email protected]> wrote in message
news:edcbe5$7vt$[email protected]..
> SirEskimooo wrote:
>> Hi Im a noob at DreamWeaver and for some reason it
wont let me space my
>> words out with more than one space. Is there a way
to be able to space
>> more? Thanks
>
> That has nothing to do with Dreamweaver, but with the
way that HTML works.
> HTML ignores all whitespace between text and replaces it
with a single
> space.
>
> If you want to insert more than one space between words,
you need to
> insert a non-breaking space. The keyboard shortcut is
Ctrl+Shift+Space.
> This inserts in the underlying code.
>
> --
> David Powers
> Adobe Community Expert
> Author, "Foundation PHP for Dreamweaver 8" (friends of
ED)
>
http://foundationphp.com/ -
Mapping for field which appear more than once.
Hi experts.
My source and target structure is:
Field1
Field2
Field3
___Child1
___Child2
___Child3
Field4
Field3 may appear a few times in the source message.
For example:
Field1
Field2
Field3
___Child1
___Child2
___Child3
Field3[1]
___Child1
___Child2
___Child3
Field3[2]
___Child1
___Child2
___Child3
Field4
I need to pass to the target structure the "Field3" who's "Child1" is greater than 5 and "Child2" is greater than 10 and "Child3" is greater than 15.
My problem is that the condition is executed only once for the first "Field3",
and if the check returns
"True" all the "Field3" are copied.
if "False" is returns no one of the "Field3" is passed.
How should i hold the context for it, in order each of the "Field3" elements passes the condition?
Regards Max.hi,
map required Field3& Child1 field with the target with the required conditions and set the context of both to the higher level.
Regards,
NJ -
MIGO - Posted lines can appear more than once
Hi Gurus,
when posting inb. dlvs. with MIGO, sometimes we get some of the lines posted multiple times, I guess we've understood the reason why but we're still looking for a solution (instead of saying to the user "leave the transaction and get back in later..."):
The "multiplication" of lines happens when MIGO is executed several consecutive times and at least one material/batch is still being processed by the previous MIGO posting:
1) start MIGO, key in inb. dlv. number, execute Post
2) perform the same as # 1 with a new inb. dlv. number and execute Post
if at least one of the materials/batch from inb. dlv. # 1 is also contained within inb. dlv. # 2, due to slow performance, you could get the following error message: "Batch xy of material abc is already locked by asdfg"; MIGO screen will remain empty, field to key in inb. dlv. number will be cleared.
At this point, if the user will type in (again) the same inbound delivery number + F8, assuming the lock had been removed in the meantime, the program will "double" the lines (or add the lines up to the one the program reached before to raise the error message).
Sounds like a program bug, error message M3682 should stop the program or clear the buffers, otherwise there's no way the use can know something was read and stored "behind the scenes" and is going to be used as soon as the lock will disappear.
Any help/suggestion will be really appreciated.
EnricoPlease, try to provide as much information as possible, instead of as little as possible. What’s the time interval chosen in the Remove copy from server popup menu?
It looks like Mail has lost track of which messages have already been downloaded and is downloading them again, or maybe it’s failing to remove them from the server according to your settings.
Try to remove from the server all the messages that have already been downloaded by clicking the Remove now button -- check for new mail first, just in case there is something amiss and that function doesn’t work as expected.
If Preferences > Accounts > Advanced > Remove now fails to remove the messages from the server, you can try to do so manually using the Account Info window. In order to use that feature, choose Get Info (⌘I) from the Action menu (gear icon) located below the mailboxes list in the main Mail window. -
The same album appears more than once in cover flow
*1st question:* I just got my i-pod and i-tunes pulled album artwork automatically for the songs i put in i-tunes (not all of them of course), but when i view them on my i-pod using cover flow it will have the same album cover 2 or 3 times side by side. How do i get the cover flow option to only show one album? Why is it doing this - doubling up on an album with the same songs? Do i have to rename the album within the properties of the mp3 files to make them all the same?
*2nd question:* Can i assign a mp3 file or song to a specific album within i-tunes? If i have a song that i don't know the album name of or if i don't care and just want it with other songs for an artist can i add that song to an album that is already established within i-tunes and has album artwork? I also want to use this to get rid of the grey boxes for songs that i-tunes could not find album art for - i just want to put all of these random songs into one album. Can i do this somehow?Can i assign a mp3 file or song to a specific album within i-tunes?
Right click - get info and type in an album name.
If i have a song that i don't know the album name
I'd give it an album name of Unknown Album
I also want to use this to get rid of the grey boxes for songs that i-tunes could not find album art for - i just want to put all of these random songs into one album. Can i do this somehow?
Select all the songs, right click - get info.
Give them an album name (such as Unknown Album) and paste in a picture of your choosing.
Maybe you are looking for
-
Poor OTA reception with Windows 7 Media Center but fine with other software and my TV
I installed a new tuner (ASUS EHD3-100 dual ATSC tuners) into my Inspiron 518 (7 Enterprise, C2Q 2.4GHz, 3GB RAM, 640GB HDD, Radeon 5450 512MB, most recent drivers and updates installed). Tried to set up the tuner in windows 7 media center and had t
-
Why do I have 2 iPhoto windows open?
Why do I have 2 iPhoto windows open? When I click on the dock iPhoto app it gives me 2 iPhoto window options. Do I officially have double iPhotos or have I some how duplicated it? How can I get back to one as Im already struggling with lack of memory
-
Achieving Redundancy with Cisco Routers and Switches
I have two 2600 routers connected to two different ISP and in turn these are connected back to our head office to a 3560 series switch.Iam trying to set up the different connections such that if one ISP connection fails the other one takes over immea
-
Each time I try to download Adobe Air, I keep getting an error pop-up stating that I need to go to adobe to get a newer version. Each time I attempt to do this, I receive the same error. I'm able to get to the point where Adobe Air Installer icon a
-
I have a mac. How can I view PDF files within firefox?
If possible I would prefer to use Adobe's solution if there is one.