Why do i continuously get corrupted content message after installing newest updates?

I use Project Free TV quite a bit. It was working great, but after I installed new updates for Firefox, most of the links don't work and gives me Corrupted Content message. The links work fine through Explorer.
For example:
'''Corrupted Content Error'''
The page you are trying to view cannot be shown because an error in the data transmission was detected.
The page you are trying to view cannot be shown because an error in the data transmission was detected.Please contact the website owners to inform them of this problem.''

I use Project Free TV quite a bit. It was working great, but after I installed new updates for Firefox, most of the links don't work and gives me Corrupted Content message. The links work fine through Explorer.
For example:
'''Corrupted Content Error'''
The page you are trying to view cannot be shown because an error in the data transmission was detected.
The page you are trying to view cannot be shown because an error in the data transmission was detected.Please contact the website owners to inform them of this problem.''

Similar Messages

  • Keep getting error 2 message after installing iTunes9

    When trying to install the new iTunes I keep getting this error message after installation:
    *Apple Application Support was not found.*
    *Apple Application Support is required to run iTunes, Please uninstall iTunes, then install iTunes again.*
    *Error 2*
    I don't know how to fix this. I have tried multiple times to uninstall and reinstall. I don't understand how to fix this problem. From previous posts, I can't figure out where to go on my computer.

    I too am having this exact same problem. Is it a coincidence that both of us have HP Pavillions'? Very interested in finding a solution.

  • HT4943 Error during download - I keep getting this error message when installing or updating apps

    I subscribed to wired magazine and I am trying to download the first mag, however I keep getting an error message stating "error during download, try again later". I also get an error message when trying to resume paused updating of apps. I've tried turning ipad2 off and then on again but this doesn't  work. Can anyone help?

    There are all basic troubleshooting steps that have worked for other users in the past that were having problems downloading and updating apps. YMMV .....
    Make sure that you do not have a stalled download in iTunes - a song or podcast .... if you have a download in there that did not finish, complete that one first. Only one thing can download at a time on the iPad so that could be what is causing the problem.
    If that doesn't work - sign out of your account, restart the iPad and then sign in again.
    Settings>Store>Apple ID. Tap your ID and sign out. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
    Go back to Settings>Store>Sign in and then try to update again. Tap one waiting icon only if necessary to start the download stream.
    You can also try deleting the waiting icons - tap and hold down on an icon until it wiggles - the tap the X on the icon to delete it. Then try to download again.
    You can try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your app preferences and device settings again.

  • I'm getting  an error message after completing an update.  Help?

    I'm getting  an error message that says "This version of iTunes has not been correctly localized for this language.  Please try running the English version." after completing an update.  Help?

    Thanks for your help! I imported the table into Muse, then exported the site as html and opened it in Dreamweaver. I should've tried that in the first place but gave up when I couldn't edit it in Muse. I didn't know you could edit the html right in Muse. Also, my styling and the images I was using weren't showing up in Muse but once I opened it in Dreamweaver, everything fell into place. AND I could edit it! My client needs to edit this page every week, so I needed to be sure she could do that. She doesn't use Muse but does use Dreamweaver. At this point, I think I'll leave it alone and not try to style it with inline css. Maybe when I get a little more time, I'll try it. I just don't want to mess things up now that the're working.

  • I Keep getting this error message after installing elements 7

    I Keep getting this error message,-Photoshop Elements Help could not be found. Please re-install Photoshop Elements to fix this problem.

    Moving this discussion to the Photoshop Elements forum.
    Philipk91962784 what operating system are you installing Photoshop Elements on?

  • Getting this error message after installing and clicking getting started

    I have been getting this error message when i click the Getting Started option for oracle
    "Windows cannot find 'http://127.0.0.1:%HTTPPORT%/apex/f?p=4950'. Make sure you typed the name correctly, and then try again."
    any ideas on what to do about this?

    Obvious thing to do is to correct Get_Started url shortcut.
    If you had searched the forum, you'd found previous threads and solutions to go, e.g.:
    {thread:id=2279339}
    {thread:id=2277895}

  • Error message after installing latest update

    Since installing latest update 11.0.2.26, I am receiving error message:   An unknown error occurred (-42110)
    Itunes does work, however, when I close this message down.
    Can anything be done?  What does it mean?  Am I better off just holding out until the next update and hope it fixes itself?

    Removing the SC Info folder as per the "Error 3001," "-42110," or "5103" section in the Specific Conditions and Alert Messages: (Mac OS X / Windows) section of the following document seems to help most folks reporting the iTunes launch 42110s:
    iTunes: Advanced iTunes Store troubleshooting

  • Why do I continually get the error message "iTunes Match could not be updated because you were disconnected from the network during processing"? What network?

    Over the last 4 or 5 days, I get this message every time I open iTunes.  I'm not sure what network this error message is talking about.  Any ideas?

    Hello FredJay,
    Thank you for contacting Apple Support Communities.
    iTunes Match needs a network connection to work, either Wi-Fi, cellular or wired. See the following:
    Make sure you have an active Internet connection
    Be sure your computer or device has an active Internet connection by loading a webpage using Safari or another web browser.
    On an iOS device with cellular support, if you are not on a Wi-Fi network, try enabling 3G cellular data1 for iTunes Match.
    For iOS 6, tap Settings > iTunes & App Stores > Use Cellular Data > On
    For iOS 5.1.1 or earlier, tap Settings > iTunes & App Store > Use Cellular Data > On
    1Fees may be associated with downloading over cellular networks; contact your wireless carrier for details.
    From:
    iTunes Store: Troubleshooting iTunes Match
    http://support.apple.com/kb/TS4054
    Regards,
    Jeff D.

  • HT4623 Why do i keep getting this error message when trying to update to ios 5.1 "unable to install update"?

    Ive gotten this when trying to update while connected to iTunes and when I tried to update through general.

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Select
    /var/log ▹ appstore.log
    from the hierarchical list on the left. If you don't see that list, select
    View ▹ Show Log List
    from the menu bar. Then select the messages from the last installation or update attempt, starting from the time when you initiated it. If you're not sure when that was, click the Clear Display button in the toolbar of the Console window and then try the installation again.
    Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
    If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
    When posting a log extract, be selective. Don't post more than is requested.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.

  • HT1338 why do I get an error message when installing the update

    An error occurred while installing the updates.(103)

    ksals wrote:
    An error occurred while installing the updates.(103)
    Try downloading and installing the 10.8.3 Combo Update from here
    http://support.apple.com/kb/DL1640?viewlocale=en_US&locale=en_US
    Cheers
    Pete

  • How do I get firefox to work after installing an update (Can I go back to an older version if possible)?

    I recently updated from Firefox 3.6.3 to 3.6.8. I skipped previous updates because of similar problem I'm experiencing now however now it is worse. Immediately after installation, messages windows pop up. The FIRST window says: “Firefox has stopped working. A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available.”
    The SECOND window (with a red circle surround a white ‘X’) says: “firefox.exe – Unable to Locate Component. This application has failed to start because xul.dll was not found. Re-installing the application may fix this problem.”
    The THIRD window is called the “Mozilla Crash Reporter. We’re Sorry. Firefox has a problem and crashed…” where it gives me the option of submitting a report and restarting (which I have done).
    The problem happened during previous attempted updates which is why I tend to avoid Firefox updates until today. However, in the past all I would do is manually power off the computer and restart the computer. Firefox never completed the installation so I was able to use the older version of Firefox.
    Now I cannot do that because Firefox is updated to 3.6.8 which refuses to open. How can this problem get fixed? I am not “tech savvy” but loyal to Firefox (and for now I have no access to all my bookmarks).
    Thank you.
    == User Agent ==
    Mozilla/5.0 (Windows; U; Windows NT 6.0; en-US) AppleWebKit/533.4 (KHTML, like Gecko) Chrome/5.0.375.125 Safari/533.4

    Hello Michael.
    Hopefully this support article is what you need:
    https://support.mozilla.com/en-US/kb/Firefox+will+not+start
    In any case, it's possible that you are having a problem with some Firefox add-on that is hindering your Firefox's normal behavior. Have you tried disabling all add-ons (just to check), to see if Firefox goes back to normal?
    Whenever you have a problem with Firefox, whatever it is, you should make sure it's not caused by one (or more than one) of your installed add-ons, be it an extension, a theme or a plugin. To do that easily and cleanly, run Firefox in [http://support.mozilla.com/en-US/kb/Safe+Mode safe mode] (don't forget to select ''Disable all add-ons'' when you start safe mode). If the problem disappears, you know it's from an add-on. Disable them all in normal mode, and enable them one at a time until you find the source of the problem. See [http://support.mozilla.com/en-US/kb/Troubleshooting+extensions+and+themes this article] for information about troubleshooting extensions and themes and [https://support.mozilla.com/en-US/kb/Troubleshooting+plugins this one] for plugins.
    If you need support for one of your add-ons, you'll have to contact its author.
    If the problem is not disappears when all add-ons are disabled, please tell me, so we can work from there. Please have no fear of following my instructions to the line, as all can be easily undone.
    Also, if you want to use an older version of Firefox, please use Firefox 3.5.11. Only versions 3.5.11 and 3.6.8 are supported, and both contain all the latest security fixes. Using any other version is unsafe and not recommended.

  • Why did my iPad go into recovery mode after installing latest update?

    I installed the latest update for the operating system and when my ipad 3 restarted, I get a unresponsive screen with a iTunes logo in the middle and a picture of the charging cord on the screen.  It does not let me do anything with it.  Any ideas?

    Why it happened nobody can know for sure. Did the download stall? Do you run antivirus software that can interfere with the download? Did your internet connection cut out?
    There could be any number of reasons why it happened. Were you able to restore the iPad and get it up and running again?

  • Cannot get QuickTime to run after Installing latest update.

    After going through install and final "FINISH" window appears and "OK'ed".
    Try to launch QuickTime, get QuickTime Unavailable window with RED X, and message "QuickTime failed to initialise. Error # -2096, Please make sure QuickTime is properly installed on this computer."
    Does anyone have an idea what could be the problem?

    The following document is probably worth a shot with that one. (Make sure that none of the checkboxes are filled in the compatibility tab, not just the compatibility mode box itself.)
    Error -2096 message when opening QuickTime for Windows in Compatibility Mode

  • Sent Items Folder Showing Blank Messages After Installing Exchange Update Rollup

    Hi all,
    Over the weekend I installed Update Rollup 8 on my Exchange 2010 SP2 servers.  Some users today have reported that their "Sent Items" folders in Outlook 2007 are either showing up as empty or populated with "Blank" items (depending
    on how the fields are sorted). 
    If they login to OWA their items are all there. 
    The only commonality I can find between the people experiencing this issue thus-far is that they aren't using "Offline Mode" (which they should be, so I have been the support desk enabling it for the people calling in), but I am kind of curious
    as to why this may have happened.  Does anyone have any insight they can share here? 
    Additionally, I have found the "outlook.exe /cleanviews" command which may help as well (have yet to try it on anyone's system where the problem exists), but it would be nice to know what the culprit may be. 
    Thanks in advance!

    Hi Niko,
    Thanks for your reply.
    As I mentioned in my original thread, I have not used the /cleanviews switch yet, as each person who has experienced the issue has had it resolved by enabling Offline Mode (weren't in Offline Mode to begin with). 
    Additionally, I have found that this issue has been around since UR 6 (see the comments section):
    http://blogs.technet.com/b/exchange/archive/2013/02/12/released-update-rollup-6-for-exchange-server-2010-sp2-and-exchange-2007-sp3-ru10.aspx
    There are also some other threads on here where people have had similar issues that were either resolved by going Offline mode, running the /cleanviews switch, or completely removing UR 6 (like this one:
    http://social.technet.microsoft.com/Forums/exchange/en-US/211b662f-c5e6-4233-86b3-aaf7dd9408c5/outlook-sent-folder-all-email-items-missing?forum=outlook).
    Unfortunately, as is my understanding, Microsoft isn't doing any new updates (other than security fixes) for SP2, which I'm stuck on at the moment until I remove an old archive program from my network. 
    So now I'm just curious as to if there may be a QFE or fix for this issue. I'll place a call to support if necessary, but I will need to grab some screenshots of users' Outlook that may still be experiencing this first.

  • After upgrading to FF7, I get Corrupted Content Error on certain web pages, Why?

    After upgrading to FF7, I get Corrupted Content Error on certain web pages, Why? When I try to log in to certain sites to get email or when I try to access a few sites I get a Corrupted Content Error message. If I use Internet explorer the sites work fine. I disabled my entire Norton internet security program and there was no change. Current OS is windows 7 on a hp platform.

    You can get such an error if there are multiple location redirects send via the HTTP response headers.<br />
    Firefox doesn't allow that for security reasons.
    *[https://bugzilla.mozilla.org/show_bug.cgi?id=681140 bug 681140] - Corrupted Content error due to multiple Content-Disposition header field instances
    ''(please do not comment in bug reports)''

Maybe you are looking for