Why do I get 3 digits for the day in Finder listing of files?

Yesterdy I upgraded to Mavericks; now when I open my files in Finder, the day shows 3 digits in the date modified column, e.g. 331 October 2013; anyone see this or have a solution to get real dates back?

UPDATE: I played around with this...seems the 3 digits may indicate the day of the year counting from 1 Jan as 1. I used Excel to calc the number of days from 1 Jan to 1 Oct and got 273; then I subtracted that from the "day" on a file I revised within the last few days. The date was 297 Oct 2013. The difference between the 297 and the 273 is 24, which is a reasonable date for me to have updated the file on 24 Oct. That may be the "what" its doing; qusetion is "why"?

Similar Messages

Why am I getting billed twice for the same thing

I ordered 9 songs off of Itunes on 12/29/12 and my visa was billed $10.50 an email was sent to me confirming this.
today (1/2/13) I was sent another email billing my visa for $7.32 for 6 of the same songs I ordered on 12/29/12.
Why am I getting billed twice for these songs.

This a user to user forum. We don't know why you where billed twice. Please navigate to the Contact Us link at the bottom of this page and contact Apple. They will be better suited to answer your question.
Regards

Why do I get three notifications for the same email?

When I receive an email I get three notifications for it. I have no clue why...

Yeah, it's just mail, and it's totally random, most of the times it's three notifications, and when I'm lucky it's just one i'll try the reboot - remove - add algorithm

Why do I get dozens of Spam the day after making a Tech Services Call to India?

Lately I have had to make numerous calls to Tech Support. Each time the following day I find a dozen or more SPAM in my inbox. Normally I get maybe 1 or 2 per week but after making these Tech Services calls ( either chat or phon) I get dozens. Seems to me that someone in India is doing this. Please find the culprits and stop them. It is very disturbing when one of these tech tries to gain access to my computer, especially when every call results in a different excuse for internt connection issues. To allow somone half-way across the world access to your computer is very dangerous because you have no way to legally punish them for any information thefts. Demand US based service only. and to VERIZON Stop selling my email to Spamers. I do not use my Verizon email for any internet purchases, forums or anything that can result in spam yet with in hours of a contact to Verizon I get dozens of Spam so I know that Verizon is the problem.

No body likes spam, so I could see how frustrating this would be. Are the spam emails you are receiving from Verizon or other senders?
Anthony_VZ
**If someones post has helped you, please acknowledge their assistance by clicking the red thumbs up button to give them Kudos. If you are the original poster and any response gave you your answer, please mark the post that had the answer as the solution**
Notice: Content posted by Verizon employees is meant to be informational and does not supersede or change the Verizon Forums User Guidelines or Terms or Service, or your Customer Agreement Terms and Conditions or plan

Why am I getting different results for the same resolution but different Windows boxes, Win 7 and XP

I am running an .exe on two different windows boxes, one in Win 7 and one on XP. I set both for resolution 1024 x 768.
On Win 7 (laptop and old Dell desktop) I have a great looking app. On the WIn XP boxes all the fonts to large. THis doesn't make sense to me as all the PC's have the same resolution.
Has anyone run across this before?
Mark Ramsdale
Solved!
Go to Solution.

The system fonts for XP and Vista/Win7 are different.
See
http://forums.ni.com/t5/LabVIEW/Elements-have-moved-when-opening-vi-with-f3-patch/m-p/1054817
http://forums.ni.com/t5/LabVIEW/What-can-affect-the-size-of-a-front-panel-object-between/m-p/1058607...
http://forums.ni.com/t5/LabVIEW/Font-size-on-Windows-7-with-LabVIEW-2009/m-p/1055114/highlight/true#...
and several other similar threads.

Why do I get "cannot open" for the second video I stream on my home share?

I have home share setup with the latest available iTunes 11x, and I have tv shows I've purchased from iTunes that I try to watch on my ipad. I can often watch one show, then when I go to the next video from my iPad I get a message that I cannot open the video.
This will persist until I reboot the iPad. I don't consider this a long term fix, any suggestions?
I also have an Apple TV, and this seems to stream fine from my home share.

Open Pictures folder and move the files named lrcat-journal and lrcat.lock to Desktop.
Make sure that , they are not inside Pictures folder any more and try to open backup from Lighrtroom and check..
Any LRcat file with .lock extension , move it to Desktop.

Firefox will not open or stay open especially when I'm first getting on it for the day. It will sometimes say that firefox is already running and that I have to close it which I don't understand.

Right now I'm staying connected but when I tried it at 2:00 Firefox would not stay connected. It would keep saying not responding. Also sometimes if I would go to fast it would just jam up. I could be connected and then go to my email and it would say lost connection. It just kept changing as though I was getting more that one connection. Hopefully you can help me.

Basically it means firefox didnt Shut down properly and if you close firefox and you try to open it again and you get the message firefox is already running then in windows right click on the taskbar and press on task manager and then once task manager is open press on processes and look for firefox.exe and then where it says End process click that and it will close firefox properly ok and then you can open firefox up again properly ok and for mac its a differnat way ok

Why can't I print embedded images in a Thunderbird E-mail? I just get blank boxes for the images.

I am a copyeditor who receives feedback from my clients re: manuscripts I have edited. They will often sent e-mails that include small screen captures from parts of their style guide or screen captures of the proof that is in question (small sections, like a paragraph or an equation, or a header that needs to be coded/styled differently for HTML). Now, I can see these fine in the e-mail, but when I go to print them out for my reference binder, the embedded images don't print.
Mozilla, I need these to print; they are quite important to my job.
To keep my e-mail from becoming too bloated, I save these important style issue e-mails into a folder on my desktop I call "Print out for binder", queuing them for the day I can print a bunch of them out and arrange them according to subject matter.
Problem is, they are useless if they don't include these illustrative screen captures; blank boxes are worthless to the context.
It is not my printer that is the problem. if I receive a Word doc with these screen captures, they print fine. But if I try to print from T-Bird, no go. Help. (I can't save these e-mails as Word docs either, which might solve the problem; the only options in T-Bird are "Save as file" or "Save as template".)
Thunderbird is a powerful e-mail program, and one I have been using for over a decade. Why can't it perform this function? Please help. Or point me to an add-on. I haven't been able to find one that addresses this seemingly straightforward, common, and simple problem.

When you select File(or AppMenu/Print)/Print Preview, do the images appear? Do the images print if you check 'Print background (colors & images)' under File/Page Setup? I don't have any problems printing a message with an embedded image, at least to an xps file.
I devised a workaround that might help, failing a real solution: install [https://addons.mozilla.org/en-US/thunderbird/addon/unmht/ unMHT] in both TB and Firefox, and then File/Save As MHT in TB. Open the mht file in Firefox, and Print.

Aperture 3 update. Why is there still no eraser for the retouch tool?

Perhaps I'm missing something, but: Why is there still no eraser for the retouch tool?
I realize you can delete retouch strokes, but they are in linear order so you often have to delete useful ones to go far enough back to get the one that you've decided no longer works.
I would rather have the ability to erase strokes back to the original image, much like the way the History Brush works in Photoshop, and indeed the eraser tool works in many other Aperture bricks.
Example, I retouch an eye, and then move on to retouch an ear. Then I decide I don't like the eye brush strokes. In order to remove one stroke on the eye retouch, I have to delete all the successful brush strokes I've made to the ear (i.e. those that came after the stroke I wish to remove from the eye). This is needlessly complicated and inefficient.
Many of other bricks in Aperture have an eraser tool to selectively remove brushstrokes. Why not the retouch tool?
Also, many other bricks in Aperture allow for stacking or layering bricks of the same adjustment with different brush choices. Why not the retouch tool?
Am I missing something?

We are just users here. Feature Enhancement requests need to be made via Apple's official approved channel. You can get there from within Aperture by clicking "Aperture➞Provide Aperture Feedback".
Retouching (and cloning) involves not just applying a transformation to the selected pixels, but basing that transformation on _other, non-contiguous_ pixels sampled from the image. This leads me to think that there may be intractable technical problems setting up the kind of workflow you propose.

Why do i get a window in the lower right corner of the screen that says "high memory usage"

why do I get a window in the lower right corner of the screen that says "high memory usage" on my compaq presario using windows xp home edition?

Hi,
No just turn the monitor off, not the product off. Which version of NIS are you using ? Please see the following screen:
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Why did I get charged again for items I have already purchased?

Why did I get charged again for items I have already purchased?

My theory is that because the original appleID wasn't an email, they're making you switch to it when you update to iOS5. So that creates essentially a new appleID and it isn't recognized as the one that originally made all your purchases. Sign out of the Store and then sign in using your old ID and it should do the trick.
The other alternative is to sync your apps rather than reinstalling them....if you can. Hope the phone service helps.

Why haven't I received credit for the cancelation of Adobe CC subscription?

Why haven't I received credit for the cancelation of Adobe Creative Cloud subscription? I was changed $9.99 on 1 November 2013 for the subscription, but I found out that the application had some limitation to my Mac OSX, so I cancelled my subscription on November 9, 2013. My credit card company informed me that I have not received credit. My concern seems to be a problem for many Adobe customers. Adobe is quick to charge, but not so quick on the refunds.

Hi Eastwindpolarman ,
We are sorry for the inconvenience you have been facing. Please contact our chat support to get the status of the refund: http://helpx.adobe.com/x-productkb/policy-pricing/cancel-membership-subscription.html.
Regards,
Romit SInha

Hi, I have the DPS Single Edition is but the Folio Producer public when the folio I alone was deprived. Why? How do I publish for the public? Thank You

Hi, I have the DPS Single Edition is but the Folio Producer public when the folio I alone was deprived. Why? How do I publish for the public? Thank You

You should look at our Single Edition publishing guide. You don't use Folio Producer with Single Edition. http://help.adobe.com/en_US/ppcompdoc/Step_by_step_guide_to_dps_se.pdf
Note that support for Single Edition in Creative Cloud ends on May 1st. Make sure you get your app completed and approved by Apple before then.
Neil

HT201359 Why am I getting billed twice for a song download

Why am I getting billed twice for a song download

If you are being charged double the listed price then you can contact iTunes Support via this page : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption (if you are downloading the song twice then in some countries you will be charged again as redownloading is not currently possible in all countries).
Or are adding or changing credit card details on your iTunes account ? If you are then each time that you do so a small temporary store holding charge ($1 or the approximate local equivalent) may be applied to check that the card details are correct and valid and that it's registered to exactly the same name and address as on your iTunes account - it should disappear off your account within a few days or so.
Store holding charge : http://support.apple.com/kb/HT3702

How can I get null values for the later weeks

Hi All,
When I execute this code I get the records till current week.
How can I display the output so that I get null values for the later weeks. (with the help of v_numOfWeeks variable in the code)
Thanks,
Vikram
DECLARE
   v_query VARCHAR2(4000);
   TYPE ref_cursor IS REF CURSOR;
   v_refcur ref_cursor;
   v_sum NUMBER;
   v_id NUMBER;
   v_name VARCHAR2(1000);
   v_weeknum NUMBER;
   v_pernum NUMBER;
   v_numOfWeeks NUMBER := 5;
BEGIN
v_query := ' SELECT SUM(product_bkg), postn_id, postn_tbl.postn_name, b.week_num, b.period_num
                          FROM ops_cv_extract b, (SELECT row_id, desc_text postn_name
                      FROM s_postn) postn_tbl
                      WHERE lvl_6_id = 5767
                      AND fiscal_year = 2008
                      AND b.week_num < 4
                      AND b.period_num = 3
                      AND b.postn_id = TO_NUMBER(postn_tbl.row_id)
                      GROUP BY postn_id, postn_tbl.postn_name, b.week_num, b.period_num
                      ORDER BY postn_tbl.postn_name, b.week_num';
OPEN v_refcur FOR v_query;
LOOP
   FETCH v_refcur INTO v_sum, v_id, v_name, v_weeknum, v_pernum;
   EXIT WHEN v_refcur%notfound;
   dbms_output.put_line('P'|| v_pernum||'W'|| v_weeknum||' '||v_name||' '||v_sum);
END LOOP;
END;
This is the output when I execute this code.
P3W1 COMM CNTRL ISAM 213 26961.61
P3W2 COMM CNTRL ISAM 213 12870.4
P3W3 COMM CNTRL ISAM 213 245.88
P3W1 COMM CNTRL ISAM 273 72831.2
P3W2 COMM CNTRL ISAM 273 8739.38
P3W3 COMM CNTRL ISAM 273 3764.92
P3W1 COMM CNTRL TAM 213 49844
P3W2 COMM CNTRL TAM 213 20515.17
P3W3 COMM CNTRL TAM 213 16167.46
P3W2 COMM CNTRL TAM 216 12561.4
P3W3 COMM CNTRL TAM 216 2027.1
P3W1 COMM CNTRL TAM 273 -3336.71
P3W2 COMM CNTRL TAM 273 -1376.68
P3W3 COMM CNTRL TAM 273 19707.42
P3W1 Damon Walters -609.07
P3W2 Damon Walters 30030.24
P3W3 Damon Walters 37475.1
This is the output I'd like to get
P3W1 COMM CNTRL ISAM 213 26961.61
P3W2 COMM CNTRL ISAM 213 12870.4
P3W3 COMM CNTRL ISAM 213 245.88
P3W4 COMM CNTRL ISAM 213
P3W5 COMM CNTRL ISAM 213
P3W1 COMM CNTRL ISAM 273 72831.2
P3W2 COMM CNTRL ISAM 273 8739.38
P3W3 COMM CNTRL ISAM 273 3764.92
P3W4 COMM CNTRL ISAM 273
P3W5 COMM CNTRL ISAM 273
P3W1 COMM CNTRL TAM 213 49844
P3W2 COMM CNTRL TAM 213 20515.17
P3W3 COMM CNTRL TAM 213 16167.46
P3W4 COMM CNTRL TAM 213
P3W5 COMM CNTRL TAM 213
P3W1 COMM CNTRL TAM 273 -3336.71
P3W2 COMM CNTRL TAM 273 -1376.68
P3W3 COMM CNTRL TAM 273 19707.42
P3W4 COMM CNTRL TAM 273
P3W5 COMM CNTRL TAM 273
P3W1 Damon Walters -609.07
P3W2 Damon Walters 30030.24
P3W3 Damon Walters 37475.1
P3W4 Damon Walters
P3W5 Damon Walters Edited by: polasa on Oct 28, 2008 6:42 PM

Sure, in a Single SQL ->
satyaki>
satyaki>select * from v$version;
BANNER
Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - Prod
PL/SQL Release 10.2.0.3.0 - Production
CORE    10.2.0.3.0      Production
TNS for 32-bit Windows: Version 10.2.0.3.0 - Production
NLSRTL Version 10.2.0.3.0 - Production
Elapsed: 00:00:00.01
satyaki>
satyaki>
satyaki>-- Start Of Test Data --
satyaki>with week_tab
2 as
3    (
4      select 1 period_num, 1 week_num, 10 bkg1 from dual
5      union all
6      select 1, 2, 40 from dual
7      union all
8      select 1, 3, 30 from dual
9      union all
10      select 1, 2, 20 from dual
11      union all
12      select 1, 1, 10 from dual
13      union all
14      select 1, 1, 20 from dual
15      union all
16      select 1, 3, 10 from dual
17      union all
18      select 2, 1, 15 from dual
19      union all
20      select 2, 2, 20 from dual
21      union all
22      select 2, 3, 10 from dual
23      union all
24      select 2, 1, 15 from dual
25      union all
26      select 2, 2, 30 from dual
27      union all
28      select 2, 3, 20 from dual
29    )
30 -- End Of Test Data --
31 select period_num,
32         week_num,
33         (
34            select sum(week_tab.bkg1)
35            from week_tab
36            where period_num = m.period_num
37            and   week_num   = m.week_num
38            group by week_num, period_num
39         ) sum_bkg1
40 from (
41        select dum.week_num,
42              wk.period_num
43        from (
44                select 1 week_num from dual
45                union all
46                select 2 from dual
47                union all
48                select 3 from dual
49                union all
50                select 4 from dual
51                union all
52                select 5 from dual
53              ) dum ,
54              (
55                select distinct period_num
56                from week_tab
57          ) wk
58      ) m;
PERIOD_NUM   WEEK_NUM   SUM_BKG1
         1          1         40
         1          2         60
         1          3         40
         1          4
         1          5
         2          1         30
         2          2         50
         2          3         30
         2          4
         2          5
10 rows selected.
Elapsed: 00:00:00.48
satyaki>Regards.
Satyaki De.

Why do I get 3 digits for the day in Finder listing of files?

Similar Messages

Maybe you are looking for