Why do I get a apple id - not my own - come up onmy iPad?

I am getting an apple ID - not my own - popping up on my iPad screen all the time. Does anyone know why,and if I can stop it?

Thanks for your input, I purchased iPad new. I haven't put any new apps under new ID's either. This has only happened in the last 3 days, so as you can imagine I have no idea why...... Not sure what setting you are talking about though....

Similar Messages

Why do I get an error message when I try to sync my IPAD with ITunes? Message reads Cannot be used because Apple Mobile Device Service has not been started.

Why do I get an error message when I try to sync my IPAD with ITunes? Message reads Cannot be used because Apple Mobile Device Service has not been started.

AMDS for Windows
http://support.apple.com/kb/TS1567

Why do i get 2 curves and not just 1 when i create a diagram from a row of data in a table ?

Why do I get 2 curves and not just i when I create a diagram from a row af data in a table ?

Erik,
Thank you for giving me the points. Generally you wait to award points until your problem is solved. It is totally your at your descretion.
OK.
This is still not clear. To post a screenshot get the "stuff" you want to show in view on your screen, then type the key combination <Command>+<Shift>+3. The cursor will change to a crosshair. Click and hold on the top-left corner, then drag to enclose what you want to show (to the bottom-right corner), then release. The screenshot will appear on your desktop and will be named something like "".
Now click the camera icon in the tool bar for this forum:
, click the text box to allow you to navigate to, and select your screenshot.
Here is what you sent me:
The graph does not seem to be associated with the table of data you are showing. Generally when you highlight a graph the corresponding table will highlight and show the source of each of the series in the graph (dark and light blue).
This is what I would expect to see when highlighting a graph:
Right now I think there is ANOTHER table arround that is the source for the graph and the table you show is "just another table". You can move your data into the table the graph refers to by copy and paste, or simply typing the values. You can change how many series there are by grabbing the little circle at the bottom right of the highlighted cells (when you have the graph highlighted) and dragging as shown:
The Numbers Users' Guide is a great resource you should utilize and can be found here:
http://support.apple.com/manuals#macosandsoftware
The chapter on graphing (or charting) is 7 and starts on page 134.

HT200109 Why do all my other Apple devices not care if the movie I rented from iTunes if it was downloaded directly to that device or not, but the stupid Apple TV won't allow you to play rented movies unless you rented it directly from the Apple TV?

Why do all my other Apple devices not care if the movie I rented from iTunes if it was downloaded directly to that device or not, but the stupid Apple TV won't allow you to play rented movies unless you rented it directly from the Apple TV?
Great, so now I have to airplay it by linking my computer to my Apple TV and then the movie has to buffer! So, all that time I spent downloading the HD video has to technically "download" again by buffering. The more I use Apple TV, the more I feel like this item was not created by Apple. I don't even use it for what I originally purchased it for. If I would have known that anytime I wanted to sync a movie from my computer to Apple TV by using airplay that it would have to buffer the movie, I would have never ever ever ever ever purchased this waste of time device. So the video has to technically play all the way through one time first so Apple TV can "remember" the movie to play it back in real time afterwards.
Am I missing something here? Am I doing something wrong that can be fixing my problem? I should have known that the Apple TV had so many things backwards when simple things like when you are using the remote and you reach the bottom of your list, in order to cycle back to the top of your list you have then press the directional buton back the other way rather than most modern day devices that will automatically cycle you back to the top or to the other side when you reached the bottom or end but keep on pressing the button. That **** annoys me when I am doing a search for a movie and have to type the name in manually and have to cycle back and forth to the letters. It makes me feel like I am using a rotary phone or something!

I was told by someone to try and purchase something directly from my Apple TV and that will help authorize my Apple TV. So I picked something that was free and it downloaded.
Then I went back to the Movie that would not work and it played just fine.
So it seemed to work. I will have to try it on other movies and TV shows later.

Why does the password of Apple Id not paste from the clipboard at the Ipad?

Why does the password of apple id not paste from the clipboad at The ipad 2 ?

In most apps, you can't paste into the password field. It's a security risk.

Captivate 8: Why am I getting a HTTP 404 Not Found error when I try to preview a responsive project?

Captivate 8: Why am I getting a HTTP 404 Not Found error when I try to preview a responsive project?

Out of curiosity, some here have recommended renaming an EXE file behind the scenes to eliminate that firewall message when starting up. Are you one of those folks that tried this? My thought is that if so, perhaps this is a result?
Cheers... Rick

HT4972 why am i getting an error -48 when updating to iOS5 on my iPad

why am i getting an error -48 when updating to iOS5 on my iPad and how do I fix it? Apple's suggestion does not work.

I'm sorry but I don't what the error means other than the ipsw file is bad - which is what it says in the article and it usually relates to something in the specific user account.
You did try creating a new user account on the Mac and tried updating that way? You have no security software running on the Mac?
The app that was downloaded using your son's ID should not affect the update to the best of my knowledge.
jparrsies wrote:
On a related question, I would not care so much if i could make a good backup and not have the upgrade overwrite this backup. Once I start the upgrade, iTunes thinks I've never done a successful backup of the iPad and yet I've done at least a dozen over time.
I'm not sure I understand what you mean here by "iTunes thinks I've never done a successful backup". Are you trying to do a manual backup?

Just got an iPad mini 3 and have not reset my iPad mini 3; is that why the photos from iCloud backup are not showing up in the new iPad?

Just got an iPad mini 3 and have not reset my iPad mini 3; is that why the photos from iCloud backup are not showing up in the new iPad?

Sorry, don't know what you are asking. You have an old iPad Mini 3 and a new iPad Mini 3? How did you set up the new iPad? Did you restore it from a backup of the old iPad? What photos are you not seeing?
Cheers,
GB

Why do I get a blue box with ? In Safari with my iPad?

Why do I get a blue box with ? In Safari with my iPad? It appears to be where pictures should be. Very annoying when trying to read through an explanation of something and I get this dang blue box.

It's usually some graphics element that the iPad can't handle. Maybe it's a flash image, maybe it has another protocol that the iPad just can't display. NO way to say for sure without viewing the same page on a computer then checking the file type.

Why do I get a "NullReferenceException was not handled by user code" error in one situation but not in the other?

We are using Sharepoint 2010 and Infopath 2010. In my form, I have a Managed Metadata field that I need to test for a Null value. I found, with the help of this forum's participatns, that a [field]_Changed event for one MMD field runs multiple
time because of the underlying XML elements (Terms, TermInfo, TermName, TermId). So I'm trying to figure out how to test the XML to see when the TermName has a value. By doing this, I hope to limit when the additional code in my form runs, i.e.
I'll only trigger it when TermName is not null.
Just to test for null/empty (before doing anything that calls the addtional code) when I run this code, it completes correctly but always shows a message box:
Dim strTest As String = Me.CreateNavigator.SelectSingleNode("/pr:properties/p:properties/documentManagement/ns2:h2b59c4ae4144c01973b1d8571d217ad", Me.NamespaceManager).InnerXml
            If String.IsNullOrEmpty(strTest) Then
            Else
                MessageBox.Show("This is the value of the States InnerXML   " & strTest)
            End If
But when I run this code, I get a "NullReferenceException was not handled by user code. Object reference not set to an instance of an object" at the "Dim strTest..." line:
   Dim strTest As String = Me.CreateNavigator.SelectSingleNode("/pr:properties/p:properties/documentManagement/ns2:h2b59c4ae4144c01973b1d8571d217ad/pc:Terms/pc:TermInfo/pc:TermName", Me.NamespaceManager).InnerXml
            If String.IsNullOrEmpty(strTest) Then
            Else
                MessageBox.Show("This is the value of the States InnerXML   " & strTest)
            End If
Can any one explain why drilling down like this gives me this error? And can you tell me how to get around it so I can limit how many times the code in my Infopath form needs to run?
Thanks in advance. Carol.

Never mind, I think I've got it figured out. When I do it this way, I get to the If Not...Nothing at the correct time. Thanks for sending me down the correct path, Scott. Carol.:
Dim
firstStr As
String =
String.Empty
Dim xNav
As XPathNavigator = MainDataSource.CreateNavigator()
Dim xFirst
As XPathNavigator = xNav.SelectSingleNode("/pr:properties/p:properties/documentManagement/ns2:h2b59c4ae4144c01973b1d8571d217ad/pc:Terms/pc:TermInfo/pc:TermName",
Me.NamespaceManager)
If
Not xFirst
Is
Nothing
Then
Dim strxFirst
As
String = xFirst.InnerXml
                MessageBox.Show(
"Value of InnerXML   " & strxFirst)
Else
                MessageBox.Show(
"Empty or Null")
End
If

Why do I get window adobe flash' NOT INSTALLED AFTER I HAVE JUST UNINSTALLED AND THEN REINSTALLED IT

why do I get a "correct version of adobe flash not installed"message after I have uninstalled and reinstalled the program several times. It worked on this computer for the last six months?

What is your operating system, version & edition?
What is your web browser?
What is your Flash Player version?
What are you doing when you get that message?
[topic moved to Flash Player forum]

Why should i get an apple tv?

What does an apple Tv do? why should i get one? are they any good? how do you use them?

Any good? Im a grumpy "doesn't like anything person" AppleTV is far and above worth the $100 cost of same.
Tons of free content. You can wifi beam your screen to your TV via the AppleTV, beam movies, youtube content on the screen.
AppleTV doesnt even have a bottom, plug it into the wall, plug HDMI cable from IT to your Tv set.....
3 mins to set it up with remote and then its all cruising from there.
If you get one, youll only be upset that you didnt buy one earlier.

Why do I get a boot drive not found error only when laptop lid has been closed?

I've got a HP Mini 210 P/Number: VX818EA with Windows 7 Starter.
It works fine when turning on after shutdown, but when I've put it to sleep by closing the lid it won't 'wake up', and I get a blank screen. On restarting the computer I get a 'boot drive not found' error, (3F0) which can be resolved by following the steps on this page: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01443463&tmp_task=solveCategory&lc=en&dlc=en&cc...
I've run disk check etc as suggested on that link, no errors are found, but nothing seems to resolve the problem more than temporarily. Seems odd that this only happens if I close the lid (sleep mode with the lid up is fine, doesn't crash the computer).
Can anyone advise?
Thanks

Hello,
Very strange, can you go to BIOS and reset the setting " By Default " ?. How did you check the disk ?
This is an unusual probleme Hp Mini 210 . And notice me after your reset the bios settings.

Why am I getting this err -Could not complete the Split Extrusion command because of a program error

To recreate this error, draw 2 simple shapes in Illustrator CS6, copy and paste them together as a Shape layer in Photoshop CS6.
Then go to 3D > New 3D Extrusion from Selected Path. I just accept the defaults.
Then go to 3D > Split Extrusion.
The error is thrown at this point. No matter what I do, I can't get it to work.
I've tried rasterizing the shape, but then I get a different error. When I select 3D > New 3D Extrusion from Selected Layer, I get the error: "Could not complete the New 3D Extruions from Selected Layer command because the path is too complex." This is ridiculous. I can't get the 3D to work at all.
Is Photoshop just this buggy or am I trying to do something that should not be possible? If so, the error message certainly should be more helpful than what I'm seeing.

You may have answered my question. I AM using the 64bit version of Illustrator CS6. I had no idea there were bugs in it that affected paths copied and pasted from Illustrator to Photoshop.
A bit more about what I'm trying to accomplish... I'm trying to follow Deke's tutorial (http://www.deke.com/content/dekes-techniques-018-creating-a-3d-pie-chart) which is already difficult since so much has changed between CS5.5 and 6, but then on top of that, I keep getting errors!
So I created the pie chart exactly as he shows and copied and pasted into Photoshop exactly as he does. Before submitting this post, though, I tried drawing just two very simple triangle shapes, copying them both and pasting them into Photoshop as a shape layer. The shapes weren't overlapping, but they were a part of the same shape layer just like the pie chart tutorial.
Thanks for your help. If there is anything else I should try before just giving up because of the 64bit bugs, please let me know.

How do I get my Apple TV NOT to control my Macbook volume?

We just recently bought an Apple TV. We synced it to our new remote to control volume and everything. Now, when we're on the Apple TV, when we move up and down on the screen, my volume on my Macbook Pro goes up and down with the tv. How do I get that to NOT happen.

If you don't want to use a remote with your computer the easiest thing to do is just to turn the IR off. (System Preferences > Security > General, click on the Advanced button in the bottom right corner - If the button is greyed out, click on the lock icon and enter your administrators password)
If you still want to use your computer remote then you must pair your computers remote with the computer AND the Apple TV remote with the Apple TV.
To pair a remote with a device hold down the menu and FF buttons together for six seconds or until you see a chain icon on screen (best take the computer into another room, or turn it off, when you do this)

Why do I get a apple id - not my own - come up onmy iPad?

Similar Messages

Maybe you are looking for