Why do I get a cross domain error mesage when trying to enter a portal?

I am trying to enter an employee self help section. The relevant site info is as follows:
https://aalawp.aaacooper.com:9600/lawson/portal/
I have tried to also type the above info in the browser section with no success. I used to be able to access the portal, but since I updated some application, I cannot access by any means.
Thanks in advance for any help that is given.

Hello,
Couple of things to note so that we can help you resolve this issue
* The URL https://aalawp.aaacooper.com:9600/lawson/portal/ doesnt' seem to be accessible outside your work network
To make the changes that cor-el suggested, please do this
*Please follow the instructions mentioned in the [http://kb.mozillazine.org/About:config About:Config ] help section
* Accept the warning - this is ok. As long as you are not deleting anything in the page you see, you will be ok
* Once you have opened about:config, you will see a 'Search' field. Please type 'security.csp.enable' to search for this text in the page
* If you see the entry, kindly note the value in the 'Value' column. This is so that you can revert if something doesn't work
* If it is set to False, right click on the field and select Toggle, so that the value changes to True
* Now try visiting the site and let us know if you are able to access it
Hope this helps

Similar Messages

Anyone else getting a timed out error message when trying to check for updates via the app store software on a desktop?

anyone else getting a timed out error message when trying to check for updates via the app store software on a desktop?

Hi, couple of things to try...
Anonymous
Post subject: NSURLErrorDomain error -1100 in OS X 10.8
If you check for software updates using the App Store in OS X 10.8 and get "NSURLErrorDomain error -1100" the problem may be with your Software Update preferences. This is particularly likely if you were using a custom Apple Software Update server. To solve the problem, quit the App Store, move the following two files (if present) to the trash, restart, and only then rerun App Store updates:
/Library/Preferences/com.apple.SoftwareUpdate.plist
/Library/Preferences/com.apple.SoftwareUpdate.plist.lockfile
http://x704.net/bbs/viewtopic.php?f=12&t=6130
I was recently trying to upgrade to mountain lion through the app store. I have unreliable Internet from a cable company whom I will not name, but we all know who they are. My Internet dropped while downloading the upgrade. Once I went through the notorious unplug the modem/router and plugged it back in to gain Internet connectivity again, I could not resume. No matter what I did, the app store kept displaying "an error occurred." I am hoping that those with the same issue read this first to save them hours of skimming through the Internet to find a solution. Here are the steps to take:
1. Make sure you have reestablished Internet connection
2. Chances are you got frustrated when you tried to resume/unpause the download and clicked the "X" to the left. If so, select the "Store" drop-down menu from the App Store and select "View My Account." There should be an option to unhide your purchase. You know what to do.
3. There is also an option to reset all warnings for buying and downloading under "View My Account." Do this, click "Done," sign out of the App Store and quit the App Store.
4. Open the Preferences in safari and select Privacy. Select "Remove All Website Data." Just do it.
5. Launch the app store and sign in.
6. Now, if you "Check for Unfinished Downloads" everything works peachy.
I hope this helps. Not much I can do for your Internet connection though.
JonEz15...
https://discussions.apple.com/thread/4697970?tstart=120

User gets an Content Encoding Error message when trying to access workspace

Hi.
I've created a workspace and added several users to it who can access it without any issues.
However, one specific user (Leslie Elstad - https://beehiveonline.oracle.com/teamcollab/profiles/[email protected]) can't access her workspaces. She is using Firefox on a Solaris 10 machine.
Here is what she told me:
"I clicked on the Start button under Team Workspaces, which took me here:
https://beehiveonline.oracle.com/teamcollab/
and displayed the familiar Content Encoding Error message."
Please advise.

Hi.
Please let me know what is going on when we add people to a Beehive Online group (Solaris Curriculum).
People are frequently getting this same error/message when trying to access several workspaces.
New cases, please help me fix their access:
[email protected] can't access https://beehiveonline.oracle.com/teamcollab/wiki/Transition+to+Oracle+Solaris+11+Express
[email protected]: can't access: https://beehiveonline.oracle.com/teamcollab/wiki/Transition+to+Oracle+Solaris+11+Express
Thanks.

I have just recieved the error message when trying to enter my AI, and PS.I have been paying for the monthly membership for 3 months and still havent been able to use these softwares. they are already installed it just wont let me acess them anymore?

i have just recieved the error meassage when trying to open up both my AI and PS. I have paid the monthly payments for the membership and i have both softwares installed. what can i do to work on them and why are they giving me this error message?

Sign in, activation, or connection errors | CS5.5 and later
For anything else you have to be more specific. you have not provided any system information nor told us, what the error message actually is.
Mylenium

HT1386 I repeatedly receive an error mesage when trying to sync my ipod touch with my new computer, "some of the items in the itunes library, were not copied to the ipod because you are not authorized for them on this computer." My computer is authorized

I repeatedly receive an error message when trying to sync my ipod touch with my itunes library with my new computer which reads, "Some of the items in the itunes library were not copied to the ipod because you are not authorized on this computer." However when I try and authorize my computer I always receive the message that this computer is authorized. What am I doing wrong? I'm missing about 100 songs as a result of this error!!

See:
iTunes Store: About authorization and deauthorization
iTunes repeatedly prompts to authorize computer to play iTunes Store purchases
Could the items be purchased by another account?

Why do I get a NI-488 error massage when writing into a file and at the same time copiyng this file with a backup softwarre like Easy2Sync?

I have a small LabVIEW program which writes random numbers very fast into a ASCII-file. I want that file to be copied to a new position every 10 min. Therefor I use a backup/synchronisation software which is doing a copy operation every 10 min. It works fine a certian amount of time and after a while I get either an LabVIEW error (LabVIEW: Fiel already open: NI-488 Comand requieres GPIB Controller to be System controller) or an backup-software error (couldn´t open file...whatever). I´m guessing, it has something to do with file-access but I don´t know why?!? If I run the LabVIEW program and I copy and paste the random-number-file with the windows explorer very fast (pressing ctrl+v rapidly) while LabVIEW is still writing into this file, no error appears. Can sombody help me?
LabVIEW 2011

Hi Serdj,
you don't get a GPIB error, the error number has just 2 different explanations...
Well, you have two programs accessing the same file. One program just wants to make a copy, the other (LabView) is trying to write to the file. When copying a file that is written to you get inconsistent results! That's why one of both programs is complaining an error...
You can't have write and read access at the same time! (But you can have more than one read access at the same time...)
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome

Mpavcontroller error domain error 3 when trying to download a movie

I am trying to get on to Apple support as when I try and download a movie it saysmpavcontroller error domain error 3 . But I cant get on to Apple support as it says unsupported browser but my iPad software is up to date. Any solutions for both? My software is up to date and I have tried a hard reset but I still get the same error messages.

Hi stanleyc93647247,
Are you able to download other PDF files? What browser are you using to download the file? Have you tried a different browser? If you're using Firefox or Chrome, please see http://helpx.adobe.com/acrobat/kb/pdf-browser-plugin-configuration.html
If you're unable to download any PDF files, consider reinstalling Reader.
Best,
Sara

Get a internet explorer error message when trying to save the exported document

I get through the export process until it asks to save the exported document and then I get an internet explorer error that tells me it is shutting down the program

Good day,
Sorry to hear you're having trouble! Try the solutions in our Troubleshooting Common Problems with ExportPDF document.
Those steps should resolve this issue.
Kind regards,
David
Adobe Systems

MF Message Error Domain Error 1032 when trying to access my yahoo mail

How do I resolve this issue of retrieving my mail from Yahoo? Message MF Error Domain Error 1032. I've changed my password via my computer. Still
unable to retrieve mail and error message keeps popping up.

All of you are welcome. Glad this worked for you JTGreig, TJE173 and AMBDavid
Cheers

Getting a Not Supported error box when trying to link a subreport to the..

I am trying to build a subreport off of my main report. I am trying to link my subreport stored procedure to my main reports stored procedure. All of the paremeters on the sub report SP are of the same data type of the fields I am linking my parameters to in the main report SP. After I set it all up and go to preview it I get a "Not Supported" error box that pops up. Then I click ok and all i have is a blank white page. Does anyone know what is not supported? This happens when trying to build this report in crystal 2008. I even tried building this same report in crystal 10 and it works perfect. I don't know what I am doing wrong in the crystal 2008 environment. Please help

Thanks Bill. This fix resolved my issue.
I would award some points, but I guess as I didn't post the original question there is no facility to do this. Shame.
Appreciate it, Brendon.
Edited by: Brendon McEvoy on Apr 23, 2009 1:39 AM

Why am I getting a "Disk Full" error message when attempting to export?

I am trying to export my movie at large quality or higher and every time it gives me a "disk full" error. However, I was able to successfully export it at medium quality. I don't understand why I would be getting that error though because both my internal hard drive and external drive, which I am exporting from (but onto the internal), have ample amount of space to accommodate for a large or HD quality video. Any help would be much appreciated!

How much space do you have?

I'm getting the apparently "deadly" error 3149 when trying to restore my Ipod Touch 4g

A few days ago I tried to update my Ipod Touch (4th Generation) to the newest software. I pressed update and the apple logo with a loading bar underneath it appeared then the bar got about halfway and all of the sudden went into recovery mode. I followed some steps online to get it out of recovery mode, didn't work. So then I decided to just restore it. I tried restoring directly from Itunes but Itunes never finished the download (tried 3 times). Each time it gave me a different error. So I downloaded the 0.6.1 firmware online (*though it was a 840mb download and the file only says it's 839mb, weird)and tried using the Shift + Restore method. It extracted it then said "Verifying" then gave me the error 3149. I went online, yet again and followed some steps dealing with the "Hosts" file. No luck. I've also tried putting it in DFU mode, no luck.
I should also mentioned that my Ipod is Jailbroken. It was given to me like that when I got it for my B-Day. I never use anything with Cidia or whatever so I think Jailbreaking is pretty useless but I think this is worth mentioning because it could be what's causing the problem, but I don't know if it has anything to with it for sure. I've been told that restoring it will get rid of the stupid Jailbreak but I can't restore it now can I?
Please give me some advice, any advice that I haven't tried already would be helpful. I just want to actually use my Ipod! Why's it so hard to do things?!?
Also, no idea what operating system it was before the craziness happened. I can't check right now either. :/

Did you mean 3194
See the actions for that error here:
iTunes: Specific update-and-restore error messages and advanced troubleshooting
iPhone Error 3194 - How to Fix iTunes Error 3194?
Fix Error 3194 from iTunes during iPhone restore

Getting "java.lang.NullPointerException" error message when trying to run an OATS OpenScript file from Eclipse to Create a record in Oracle EBS

Hello,
I'm trying to run a simple OpenScript script in Eclipse that creates a record (a Supplier in this case) in Oracle E-Business Suite. So I copied the the script file from OpenScript and created it as a Class in Eclipse. Then I created a main class to call the methods within the script class but no matter what method I call (initialize, run or finalize) I'm getting the java.lang.NullPointerException message. The error doesn't seem to be related with any specific line in the script but with the way that I'm calling it.
Should I call the OpenScript class from my main class in a different way? (see my examples below)
BTW, all external .jar files coming with OATS have been added to my project in Eclipse.
1) Here's the main class I created to call the OpenScript method (Eclipse auto-corrected my main class adding a Try and Catch around the method call):
public class Test {
    public static void main(String[] args) {
        nvscript nvs = new nvscript();
        try {
            nvs.initialize();
        } catch (Exception e) {
            // TODO Auto-generated catch block
            e.printStackTrace();
2) Here's the script from OpenScript (the actual script has more steps but I'm just using the first one for a proof of concept):
import oracle.oats.scripting.modules.basic.api.*;
import oracle.oats.scripting.modules.browser.api.*;
import oracle.oats.scripting.modules.functionalTest.api.*;
import oracle.oats.scripting.modules.utilities.api.*;
import oracle.oats.scripting.modules.utilities.api.sql.*;
import oracle.oats.scripting.modules.utilities.api.xml.*;
import oracle.oats.scripting.modules.utilities.api.file.*;
import oracle.oats.scripting.modules.webdom.api.*;
import oracle.oats.scripting.modules.formsFT.api.*;
import oracle.oats.scripting.modules.applet.api.*;
public class nvscript extends IteratingVUserScript {
    @ScriptService oracle.oats.scripting.modules.utilities.api.UtilitiesService utilities;
    @ScriptService oracle.oats.scripting.modules.browser.api.BrowserService browser;
    @ScriptService oracle.oats.scripting.modules.functionalTest.api.FunctionalTestService ft;
    @ScriptService oracle.oats.scripting.modules.webdom.api.WebDomService web;
    @ScriptService oracle.oats.scripting.modules.applet.api.AppletService applet;
    @ScriptService oracle.oats.scripting.modules.formsFT.api.FormsService forms;
    public void initialize() throws Exception {
        this.getSettings().set("formsft.useformsonly",true);
        browser.launch();
    public void run() throws Exception {
        beginStep(
                "[1] E-Business Suite Home Page Redirect (/ebs12cloud.winshuttle.com:8000/)",
                0);
            web.window(2, "/web:window[@index='0' or @title='about:blank']")
                    .navigate("http://ebs12.xxxxxxx.com:8000/");
            web.window(4, "/web:window[@index='0' or @title='Login']")
                    .waitForPage(null);
                think(4.969);
            web.textBox(
                    7,
                    "/web:window[@index='0' or @title='Login']/web:document[@index='0']/web:form[@id='DefaultFormName' or @name='DefaultFormName' or @index='0']/web:input_text[@id='usernameField' or @name='usernameField' or @index='0']")
                    .setText("winshuttle_user");
                think(2.0);
            web.textBox(
                    8,
                    "/web:window[@index='0' or @title='Login']/web:document[@index='0']/web:form[@id='DefaultFormName' or @name='DefaultFormName' or @index='0']/web:input_password[@id='passwordField' or @name='passwordField' or @index='0']")
                    .click();
                think(1.109);
            web.textBox(
                    9,
                    "/web:window[@index='0' or @title='Login']/web:document[@index='0']/web:form[@id='DefaultFormName' or @name='DefaultFormName' or @index='0']/web:input_password[@id='passwordField' or @name='passwordField' or @index='0']")
                    .setPassword(deobfuscate("kjhkjhkj=="));
                think(1.516);
            web.button(
                    10,
                    "/web:window[@index='0' or @title='Login']/web:document[@index='0']/web:form[@id='DefaultFormName' or @name='DefaultFormName' or @index='0']/web:button[@id='SubmitButton' or @value='Login' or @index='0']")
                    .click();
        endStep();
    public void finish() throws Exception {
3) Here's the error messages I'm getting based on the method I call from my main class:
3.a) when calling Initialize():
java.lang.NullPointerException
    at oracle.oats.scripting.modules.basic.api.IteratingVUserScript.getSettings(IteratingVUserScript.java:723)
    at nvscript.initialize(nvscript.java:22)
    at Test.main(Test.java:9)
3 b) when calling Run():
java.lang.NullPointerException
    at oracle.oats.scripting.modules.basic.api.IteratingVUserScript.beginStep(IteratingVUserScript.java:260)
    at nvscript.run(nvscript.java:30)
    at Test.main(Test.java:9)
Any help and/or constructive comment will be appreciated it.
Thanks.
Federico.

UPDATE
Compiling from command line I found out that the class definition for oracle.oats.scripting.modules.basic.api.IteratingVUserScript is missing. Do you know what .jar file contains this class?
Thanks.
Fede.

Hp g6-1278sa get blue screen and error message when trying to load xp pro

I have setup a new 500gb toshiba SATA 2 harddrive to run daul boot.
Windows XP pro 32bit and windows 64bit.
Unable to install XP pro, just goes into error and blue screen.
Ive removed the harddrive and placed it in my Packard Bell, loaded XP pro 32bit and win 8 64bit with no problem, and both run fine.
Removed the harddrive from the packard bell laptop and place it back into the HP g6-1278sa, daul boot screen on start up.
Opptions windows 8 or earlyer windows.
Windows 8 works fine.
Windows XP pro starts to load and then we get the blue screen with error message.

Hi Powlers
Ok read this tutorial ( link below ) in how to install XP within Windows 8 OR running Virtual Machine
  http://www.howtogeek.com/171395/how-to-get-windows-xp-mode-on-windows-8/
  OR
  http://www.fixedbyvonnie.com/2014/03/legally-install-windows-xp-free-windows-8-using-virtualbox/
Quick question :: What operating system was your machine shipped with initially ??? Windows 7 ???
Checkurtech
****Click the White Kudos star to say thanks****
****Please mark Accept As Solution if it solves your problem****

Why pages sometimes tells me : "an unknown error occurred" when trying to export a document into .docx or .pdf ?

Hello !
Since I've done the 5.0 update for Pages (and also with 5.1 and 5.2), I sometimes don't manage to export my documents into .docx or .pdf files. I get a message telling: "an unknown error occured", and the file isn't converted. Could someone help me ?

Other than using the version that works, as VikingOS suggests, look for any distinguishing features or objects that may be common amongst the files that won't convert. Particularly Tables which seem to experience the most problems.
We have had a number of reports of this by other users and not been able to finger exactly what is the cause.
Pages 5.2 has quite a few problems with exporting and this is just another.
Peter

Why do I get a cross domain error mesage when trying to enter a portal?

Similar Messages

Maybe you are looking for