Why do i get a daq hardware configuration required window when trying to run the daq solution wizard?

i have recently installed the ni 4552 for pci dynamic signal analyser, and am attempting to configure my system and teach myself labview. when attempting to run the daq solution wizard i am presented with the daq hardware configuration required window.
Attachments:
DAQ_Hardware_Configuration_Required.ppt ‏38 KB

hi brian, thanks for your help. i have recently received version 6.1, and done a complete re-install. i have also downloaded the latest ni daq (6.9.2) and ni dsa (6.11) versions and installed them, but still i get the same error message when trying to open the solutions wizard (please see attached powerpoint presentation).
upon selecting the "go to ni daq config utility" option MAX opens. everything appears to be in order (device passes test, test panels run ok and virtual channels are configured correctly). i am unable to go any further.
i would appreciate any guidance that you are able to give me in this matter. many thanks in advance of your help.
best regards,
ben halkon

Similar Messages

  • I'm getting a -2003F error when trying to run the internet recovery after installing a new hard disk in my macbook pro, any suggestions?

    After installing a new hard drive in my 2011 macbook pro, I'm getting a apple.com/support -2003F error when trying to run the internet recovery.  Any suggestions?

    Did you format the new HDD?  What is the status of the old HDD?
    Do you have an early or late 2011 MBP?
    Ciao.

  • PS CS5 Extended on Windows -  When trying to use the clone stamp and/or healing brush as soon as I move the cursor over the image I get an exact copy of the existing layer that moves around the window with the movement of the clone stamp/healing brush.  W

    PS CS5 Extended on Windows
    When trying to use the clone stamp and/or healing brush as soon as I move the cursor from the toolbar over to the image I get an exact copy of the existing layer that moves around the window with the movement of the clone stamp/healing brush.  This just started tonight.  What's causing this weird behaviour?

    What are the settings in Window > Clone Source?

  • HT4796 I keep getting a Windows Mail error when trying to run the assistant on my pc, but I don't have any email programs open.

    I keep getting a Windows Mail error when trying to run the assistant on my pc, but I don't have any email programs open.

    You could of course use Safari your default browser as a quick method of accessing gmail until you figure out the Firefox problem. (More than one browser may be used on a Mac or other computer).
    Is this the only site you have problems with ? and does Safari work ok ?
    Often this problem requires the page to be reloaded
    * try pressing the shift key as you reload the page
    Another problem is sometimes the cookies for that site need clearing
    * see [[Delete cookies to remove the information websites have stored on your computer#w_delete-cookies-for-a-single-site]]_delete-cookies-for-a-single-site
    * see also [[Firefox and other browsers can't load websites]] or[[Firefox can't load websites but other browsers can]]

  • Why im i getting "an unknown error has occurred" message when i sign into the app store

    Im getting "an unknown error has occurred" message when i sign into the app store. I don't have a problem signing into anything else. What could the problem be?

    Were you able to find a solution to this issue? I am also getting the 'an error has occurred' message when trying to download or update any apps on my iPhone. Restarted, updated, re-booted, etc etc, nothing has worked.

  • Why do i get error 7 at new file when trying to run the calibration?

    We have installed the DAQ software/drivers and then installed the Labview calibration program all according to the user manual.  As soon as we try to start the calibration after clicking "OK" when prompted to insert the standard unit, I get a message saying "Error 7 occured at New File".  How do I change the file path manually?

    Ummm... well, that's a little more information, but it doesn't help to shed any real light. You still have not explained what LabVIEW program you're running. Is this something you wrote? Is this something you got from somewhere? Did it come with the light meters? Can you post the code?

  • Why I am getting an error stating incorrect media types when trying to setup playlists?

    I recently created a new playlist I wanted to setup on my iPhone, but I get an error message telling me that iTunes & iCloud cannot use the playlist as it has file types it cannot use.
    The only file types in the playlist are AAC's & MP3's.
    I don't gget it. I understand that iCloud will not do really large files or videos, but I checked the file sizes, bit rates and types of each song and none of them are anything that iCloud says it cannot use.
    What the heck is going on?

    iCloud also doesn't do tunes with bitrates below 96 Kbps.

  • I am getting the message error when trying to run the labwindowa/CVI adapters for debug

    See attachments for error message and teststand settings. I am running testand 4.0.1
    It was working before and suddenly it crash and then I am getting that error message every time
    Regards
    Attachments:
    ErrorLoadCallback.jpg ‏32 KB
    ErrorLoadCallback2.jpg ‏134 KB

    It seems that something might still be corrupted or not registered properly. Have you tried running the TestStand Version Selector to re-select your current version of TestStand as the active version?
    Also, you mentioned that it crashed and now things aren't working. What exactly occurred when it crashed? Was this just TestStand freezing, or did the entire system freeze or crash? Did you see an error message of any kind?
    If the version selector doesn't help things, I would suggest a reinstall of TestStand (and possibly CVI, but let's start with TestStand). To clarify, we want to do an uninstall/reinstall rather than a repair, because the repair will only replace missing files. If a file is corrupted, the uninstall/reinstall should replace it.
    Let us know how it goes!
    Daniel E.
    TestStand Product Support Engineer
    National Instruments

  • HT201365 why am i getting an unknown error code of  4013 when trying to restore my 4S

    Hi can anyone help please?, my Iphone 4s died on me early hours lthis morning.  It was whilst on charge and it made the noise as if plugging in and out the charger!!!
    I have tried to restore in Itunes, however, I keep getting the above error message!
    Thanks

    In the article http://support.apple.com/kb/ts3694 it says:
    Error 4000, 4005, 4013, 4014, and 4016
    After you perform each step, try to restore your device.
    Restart your computer.
    Disconnect all your USB devices from your computer and connect to another USB port.
    Use a different USB cable.
    Uninstall third-party security software.
    Try restoring using an alternate computer.

  • Why do I get an "Array element prototype" -17001 error when trying to "View Paths"?

    I added some custom types to my sequence file and to MyTypes.ini, and then opened and updated all of the .seq files under "Components/User". I'm a TestStand Newbie, but I think I did this correctly.
    Now, if I try to "View Paths" in the sequence file, I get the following error:
    Array element prototype does not have a location string!
    Error Code: -17001, Program Error.
    Source 'TSAPI'
    Any idea what's going on?
    Jim Polstra

    Jim,
    Thanks for the explanation and instructions for reproducing the problem.
    I was able to reproduce this here as well and this is definitely not the intended behavior. As far as when this specific problem will be fixed, you can be assured that is being addressed in future releases of TestStand. For now though, we will have to consider a workaround, and it goes as follows:
    It appears that this is happening only with specific type definitions such as "Path" (we haven't identified any others but we can't rule out yet that others don't exist), and it doesn't really have to be placed inside of a custom container type such as you illustrated. If you simply create a custom type that is just an array of "Path"s it will behave the same way when you View >> Paths. What's really funny about this though is that "Path" is simply a custom type based on the "String" intrinsic type. If you create your own custom string type called "MyPath" and replace the "FilePath" field in the "DataFile" container type with a new "FilePath" field based on the "MyPath" datatype, the error won't occur. This is also exactly what we recommend as a workaround. So, simply do the following to implement this:
    1) Open MyTypes.ini and create a new custom type of type "String" named "MyPath".
    2) Delete the field named "FilePath" from the "DataFile" custom type.
    3) Create a new field in the "DataFile" custom container type, again called "FilePath", but make it of type "MyPath".
    4) Save MyTypes.ini
    5) Now try doing a View >> Paths on the MyTypes.ini file as before.
    As a final note, we don't really believe that much concern should be placed on this by end-users in relation to a run-time scenario, as the only thing that is really being affected by this is an edit-time tool. We acknowledge the importance of having all of the design time tools work flawlessly, but it should be made clear that this will most likely not affect anything at run-time.
    I hope this helps, and thank you again for reporting this issue to us. Let me know if you need anything else.
    Jason F.
    Applications Engineer
    National Instruments
    www.ni.com/ask

  • Why do I get a message to install Adobe Flash when I already have the latest version?

    Certain websites will not let me enter unless I install the latest Adobe Flash, but when I do so I still get the same message, even after re-booting?

    you don't need a cc subscription to use the purchased copy.
    download the installation file and use your serial number to activate when given the licensing option during installation.  you should install 5.7 instead of installing 5.0 and updating.
    Downloads available:
    Suites and Programs:  CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
    Acrobat:  XI, X | 9,8 | 9 standard
    Premiere Elements:  13 |12 | 11, 10 | 9, 8, 7
    Photoshop Elements:  13 |12 | 11, 10 | 9,8,7
    Lightroom:  5.6| 5 | 4 | 3
    Captivate:  8 | 7 | 6 | 5
    Contribute:  CS5 | CS4, CS3
    Download and installation help for Adobe links
    Download and installation help for Prodesigntools links are listed on most linked pages.  They are critical; especially steps 1, 2 and 3.  If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.
    window using the Lightroom 3 link to see those 'Important Instructions'.

  • Why do we get First operand...error message when trying to change password

    Hi
    I'm new at posting here, so sorry if I'm doing this wrong. I did search first to see if there was info on this already, but I didn't find anything. (If there is already something out there, please point me to it.)
    We are using PeopleSoft Financials 8.8 SP1.
    We have basic workflow enabled in expenses which generates an email to an approver with a link into PS Expenses (right to their worklist area) when they have an expense report to review. When the user clicks the link they are directed to the PS sign on page. Normally they can sign on without any problems. However, if their password has expried they will be redirected to a page which says "Your password has expired. Click here to change your password." When they click the link they recieve a blank page with an error message that starts out as "First operand of. is NULL, ".
    I cannot replicate it in our test environments.
    I have confirmed that we have the PSWDEXPR permission list in our environment.
    I have also confirmed that our template for Change Expired Password is correct (PeopleTools > Portal, Structure & Content > Folder, "Tools - Hidden" > Change Expired Password > Template is PRTL_TEMPLATE_PASSWORD_EXP)
    I have also tried changing our brower cache to 0. (PeopleTools >Personalization >Personalization Options > Option Category Level = PeopleTools, Format tab, User Option of METAXP. I changed METAXP to 0 instead of 900 which was set by default).
    The odd thing is that if the user waits one day, they can use the link in the expense workflow email and change their password no problem.
    Also, when our users do experience this problem, if they log into PeopleSoft without using the link from the expense workflow email the change password function works fine.
    The link seems to be okay since it works fine at all times unless the user is prompted to change their password.
    Any suggestions?

    Try the troubleshooting tips here:
    http://www.infosemantics.com.au/adobe-captivate-troubleshooting/basic-troubleshooting-tech niques
    You may have something in your project on one of the slides that is tripping up the publishing process.

  • Why am I getting missing plugin error in CS4 Indesign when trying to open indd or PDF files?

    Any help would be appreciated?

    PDF files cannot be opened in InDesign.
    InDesign files which are not able to be opened might come from a newer version, you might ask for an IDML file, but better to upgrade to the same version.

  • Upgraded to OS X 10.9.4 and Safari 'is no longer supported' Also get the error when trying to run the App Store, ' PowerPC applications are no longer supported. This is on a MAC Book Air, purchased in late 2013.

    Safari and the App store icons are both deactivated. I also cannot a software update check, as it gives the 'PowerPC applications are no longer supported error'
    Very frustrating, cannot do anything with this laptop now. Any help is greatly appreciated.

    If you don't already have a current backup, back up all data. There are ways to back up a computer that isn't fully functional. Ask if you need guidance. You can skip this step if you don't care about the data that hasn't been backed up.
    Reinstall the OS.* Your data should be unaffected unless something goes wrong. If the system was upgraded from an older version of OS X, you may need the Apple ID and password you used.
    If you use FileVault 2, then before running the Installer you must launch Disk Utility and select the icon of the FileVault startup volume ("Macintosh HD," unless you gave it a different name.) It will be nested below another icon with the same name. Click the Unlock button in the toolbar and enter your login password when prompted. Then quit Disk Utility to be returned to the main Recovery screen.
    If you installed the Java runtime distributed by Apple and still need it, you'll have to reinstall it. The same goes for Xcode. All other data will be preserved.
    *The linked support article refers to OS X 10.9 ("Mavericks"), but the procedure is the same for OS X 10.7 ("Lion") and later.

  • Getting "HP imaging device not found" error when trying to use the scanner in mountain lion. Anyone else have this problem?

    The odd thing is the printer works, but the scanner isn't recognized.
    I ran the latest Mac software update first, and then reinstalled the HP software. I checked all the settings as suggested from the HP site, but nothing seems to work.
    Has anyone had this problem and found a solution?
    Thanks
    Steven

    The odd thing is the printer works, but the scanner isn't recognized.
    I ran the latest Mac software update first, and then reinstalled the HP software. I checked all the settings as suggested from the HP site, but nothing seems to work.
    Has anyone had this problem and found a solution?
    Thanks
    Steven

Maybe you are looking for