Why do I get a dotted orange render line

Why do I get an orange dotted line in part of time line?

Possibly a corrupted render file (s). Are you having trouble editing or exporting? If so, turn off Background Rendering and try deleying project render files.
Russ

Similar Messages

Can I zoom in with camera? Why do I get red dot when camera turned on?

Can I zoom with camera on I pad? Why do I get red dot sometimes, when camera turned on?

The red dot usually means it's in video mode and that red dot is a simulation of a normal video camera's red record button. If you are on photo mode you can zoom in by putting 2 fingers on the screen and spreading htem out (just like you'd zoom on a website)
but it's a digital zoom, not an optical zoom...so it's really the same as zooming in on the finished photo. Your image will be lower quality if you zoom in. (the iPad camera is mediocre at best to begin with)

Why would I get a bright green vertical line down the center of my screen after playing a game?

Why would I get a bright green vertical line down the middle of my screen after playing a game?

Hi @DustMidnight85
Welcome to the HP Forums!
It is a wonderful place to find answers and information!
For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide Learn How to Post and More
I grasp that you are having an issue with the display but if you adjust the position of the display it disappears.
Here is a link to Display Quality Issues that may help.
As you stated it goes away when you reposition the display the connection cable may have become loose or damaged from opening and closing the display.
Here is a link to the HP Pavilion 14 Notebook PC, HP Pavilion 14 Touchsmart Notebook PC, HP Pavilion 14 Touchsmart Ultrabo.... Chapter 4 page 36 has removal instructions that may assist you in checking for that problem.
If your notebook is in warranty or you would like help please contact HP support for assistance.
Please call our technical support at 800 474 6836. If you live outside the US/Canada Region, please click the link below to get a support number for your region.
World Wide Phone Support
Best of Luck!
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Orange Render Line???

What's the orange render line mean? I recently changed a couple of my settings for a new project and now when a clip needs rendering I see an orange line instead of the usual red one.
Bones

What's the orange render line mean?
It means you can SORT OF play back in real time.
You will see an approximation of the final product.
Option-P plays back the real deal but only as fast as your Mac can handle.
Al

Orange render bar on native DV or DVCPRO HD footage in matching timelines

Okay, I've searching and calling people to figure this one out. I've captured DV footage, removed the pulldowns correctly to make it 24p, and I've used easy setup and checked my timeline settings. All correct and matching. So, why are the raw clips dropped onto the timeline presenting me with an orange render bar. This is happening with DVCPRO HD footage too. I don't remember this being an issue until updating to 5.1.3. I upgraded, so I have to downgrade to test my theory.
I have 5.0.4 still installed, so I tried it. Used XML to reopen project in 5.0.4, I have no such problems, no orange render line. What's the deal? Is 5.1.3-5.1.4 have to use core video or something that my graphic card in my old G4 tower can't handle?
Please somebody tell me this is happening to them too. It doesn't occur on my MacBook Pro, just my tower.
PPC G4 1.4Ghz, 1.5Gig RAM Mac OS X (10.4.8)

Sorry, I didn't mention all that I tried. I did dump the prefs, still no use. I'm trying to find 5.1.2 right now, see if it did it. I don't remember an issue under 5.1.1 either.
This is very frustrating because it's supposed to be running natively on the media that FCP runs natively. Even the old versions work better at this. Not a problem if you're on an Intel box with the new stuff. Seems like it's purposely crippled.

Why would I get ReferenceError #1065: "Variable title is not defined."

Well of course it's not defined. It's a dynamic class, and strict mode compilation is turned off so that I don't have to declare the property to compile it.
I've created a library item named "Page" with a single TextField instance named "title".
Page's class is defined in an ActionScript file, and it's assigned to the library item in export for ActionScript.
Page's ActionScript file defines the class as a "dynamic" class, so I should not be getting this runtime error. I turned off strict mode compiling, since it seems to be designed to check the presense of property definitions at compile time for dynamic classes like MovieClip.
public dynamic class Page extends MovieClip
    public function Page()
        super();
        var text:String = title.text; //title can be moused over in the debugger here and shows the correct value, but the flash player throws a runtime error when it tries to access it, but it shouldn't because this is a dynamic class.
So why am I getting a runtime error for the field "title". It makes no sense, because if I step to that line in the FlashDevelop debugger and hold the mouse over "title", it shows that it is in fact the instance of the TextField that I'm trying to access. Yet the player throws an error when I actually try to access it.
Is it a problem or limitation with the access style (i.e. would it work fine if I accessed it as "this.title" or "this["title"]"?

Nevermind. This was apparently a browser caching issue.   The Page base class is defined in the main interface swf, and is externally referenced through its swc in an external "lesson" file that declare a subclass of Page. It was this custom subclass of Page which was throwing the error (basically the same as the simplified example I wrote for my post, where it simply tried to access "title" as a dynamic property of the Page). What happened is the browser was caching an old version of the lesson file with the old definition of the class that was not declared as dynamic. I had received the error before, then updated the class, then I was surprised to see the error persist. It suddenly dawned on me that the browser was probably caching the old version, so I cleared the cache and it seems to work fine now.
Actually, it is a problem after all. I forgot I had updated it to use "this.title" syntax on the page I tested after clearing the cache, but the other pages that try to access title directly as "title" still throw the error. So it seems to be some sort of quirk in how flash accesses properties of a dynamic class. If you try to access them direclty, it must do so in a way that requires the property to be defined, but if you access it via "this.title" or this["title"], the it seems to resolve the property value without throwing the error.
This sucks. I was really trying to not have to write "this." for every property. The entire display list is dynamically generated from some custom XML that allows me to call constructors and set complex type-safe properties, and during construction it was copying each item into a Dictionary by name. This Dictionary was then assigned to the page class as "items", so I was accessing each display object as "item.name". Then I got the brilliant idea of just making Page and its subclasses "dynamic" so that I could just add the DIctionary values on the Page instance itself. I thought I would be able to access the dyamic properties just by their name such as "title", but lo and behold, Flash strikes again, and I have to use dot notation anyway. What do you all think? Any solutions?

Riddle me this-. Orange Render bar for some clips

I hope my system isn't getting tired and old but I have never had a project where all the clips needs to be rendered. No effects applied or anything. I converted these clips to Apple Pro Res(LT) and I still need to render. When I convert my RED footage, it works fine. But not the MVI files. See picture on this link. The files have same codec, one needs to render but the other doesn't!
http://www.redmoonlight.com/PictsOnWeb/OrangeRender.png
Thanks for you time or any solution you can give.
Things I did: Trash prefs, restart, video scope closed

The orange render bar-
"Indicates effects that exceed your computer’s real-time playback capabilities but are enabled anyway because Unlimited RT is selected in the RT pop-up menu in the Timeline. Unlimited real-time playback lets you play more effects but increases the chances that your sequence will drop frames during playback. This mode is useful for getting a real-time preview of complex effects compositions." - form the manual.
I interpet that it mean it will playback withourt requiring rendering until you apply an effect.
One of your clips is set to "maximum" quality with a higher bitirate than the one set to "Normal" quality. Not sure if that is causeing it.
MtD

Why do I get different tag icon combinations?

This is really bugging me and I can't fing an answer anwhere. I've just started organizing my photos by adding albums and keyword tags. I add the album to all the pictures and get a green album icon on the thumnail. Then for most of the images when I add a tag the album icon is gone and is replaced by a beige tag icon. But for some of the images, when I add the tag I get separate green album and blue tag icons. Why do i get different icon combinations depending on the image? Please help!!.

Yeah I’m sorry it’s not been fixed. I did complain to Adobe shortly after PSE9 was issued, when everything got given an orange tag. It seems to make no difference what icon you choose from the list, it ends up with something that looks like a luggage label colored beige. Of course the keywords will work but it’s all a bit frustrating.

Why am I getting an "error" every single time I send a message?

I keep getting an error while I'm composing mail to be sent. It says "ERROR The message could not be saved." It actually happens every single time I write a e-mail.
What does this mean, and why am I getting it?
Thanks!
Geneve

Some base info is needed to give a guesstimate for an answer ... such as computer system & program info ... specifics on each of course. Including versions including dot-numbers of each program, and what the error message says.

Why do titles take so long to render?

I have to continually stop and wait for my title to render every time I make a small change. This eats up a lot of my time. So, why do titles take so long to render?

I am sorry all but I am seriously rethinking my potential switch to FCPX. I am in the fifth hour of rendering a 1-minute 10 second title. I really cannot move on because I need to see what is happening. The entire project hangs and I get the spinning beach ball of death (SBBOD) if I try to do anything else. This all reminds me of when I had fairly large applications on my 9500 and it would get so far behind in executing commands that I had to stop, walk away, to let the computer catchup. This should NOT happen on a 8-core (16 virtual) MacPro 4.1 with 20Gs of RAM.This just *****!

Why do I get a red or green flicker when i update my current iMovie project?

Why do I get a red or green flicker when i update my current iMovie project?

Hi Cactusbarb,
If the LCD screen is turning red, your camcorder will require service to correct this issue. If you're seeing the red "Rec" dot, then the recording stops, you may need to use a faster memory card.
We recommend the use of Speed Class 6 or 10 memory cards with this camcorder.
If you determine that y our camcorder requires service, please contact us at [email protected] for service options. Let us know the model camcorder and your zip code.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Why is Final Cut so slow to render in HDV

I recently switched to a Mac Pro and FCP after being a PC & Premiere Pro user for years.
I have a 8-core 3GHz 6GB RAM machine with a 600GB RAID 0 dedicated for video usage.
I have been asking around here about how many HDV streams I should be able to get without having to render and I can't get a straight answer. Also, I have almost never seen the 8-core system go above 50% CPU usage ..... with Apple software.
So I did a test. I loaded Premiere Pro CS3 for the MAC and captured native HDV footage. I had a background video with 4 others shrunk down. Now I will say that PPro wanted me to render when I added the second stream but would still play it real time with no discernible change in video quality. After the fourth stream was added, I started to drop frames. I also saw the CPU usage would go up to about 60% for each core.
The amazing thing happened when I "preview rendered" (same as FCP rendering to screen). The CPUs shot up to 98% on all 8 cores. And a 1 minute HDV with 4 streams (three of which were shrunk back) rendered in 48 seconds. Not too bad.
I repeated the exact same thing in FCP 6.01 and was quite disapointed (especially after just having spent $1200 on the software). Same exact thing took over 4 minutes to render.
I also noticed another strange thing with FCP. After I added the second shrunk-back box (HDV video), FCP wanted to render just like PPro did. I set FCP to unlimited render and it went orange but did it. The background video went to what looked like quarter resolution. The second stream looked fine. This same thing repeated when I added the two other boxes of video. The background video looked, well, yucky, and the boxes looked ok.
Anyone else having issues like this? Is this just because the Adobe software is newer than the FCP software? I am really stumped by the lack of multi-core usage on FCP as compared to Adobe. I was certain that FCP would fly compared to PPro.
Best regards,
Stacy

I experience problems with Pro Res on all systems (ie not just Final Cut) but it seems to me that Apple aren't all that interested in it as a format for finishing. I'm with Apple on this, I've been converting to ProRes on ingest (prior to that I was doing uncompressed or PhotoJPEG) and my machine (8 Core) flies through renders. HDV just *****. Simple as that. Capture your footage using the HDV-ProRes setting.
Only downside is bigger files, but Hard drives are so cheap now, who really cares. HDV can't hold up to extreme Colour corrects or FX anyway, so even when I did edit in HDV, I'd usually do my finishing renders in uncompressed, depending on the length of the piece. Having said all that, I have noticed some improvements in HDV with 6.02 At the end of the day however, switch to a man's codec and stay there, unless you need to go back out to HDV tape, in which case, switch to Prores or something else for editing and switch your sequence back before you go out to tape. It'll mean rendering everything again, but that's what daytime is for.

Why am I getting emails twice?

Why am I getting emails twice. Not all the time ... but sometimes. An email comes in ... five minutes later the same email comes in again. And theyre not spams ... theyre legit emails.
Im puzzled by this.

Hi Kara38,
Thanks for using Apple Support Communities. This article contains information on the conditions that have to exist for an iPad to trigger that email:
iCloud: Locate your device
http://support.apple.com/kb/PH2698
Find the approximate location of your iOS devices and Mac computers. You can locate your device if:
Find My iPhone is set up on the device.
The iOS device is online, or the Mac is online (awake and in range of a Wi-Fi network).
Note: If Find My iPhone can’t locate a device, the last known location is displayed for up to 24 hours. Select “Notify me when found” to get an email when it comes online.
Note: Maps and location information depend on data collection services provided by third parties. These services are subject to change and may not be available in all geographic areas, resulting in inaccurate or incomplete maps or location information.
In the above quotes, the term "online" leads to this article:
iCloud: online
http://support.apple.com/kb/PH2593
That article goes on to further define being online as:
An iOS device is online if it’s turned on (with or without a passcode lock) and connected to a data network, such as EDGE, 3G, or Wi-Fi. A Mac computer is online if it’s turned on and connected to the Internet via Wi-Fi or Ethernet.
If a device is online, a green dot appears beside the device in the My Devices list.
I hope this helps,
- Ari

Why do i get f4 on field in alv report ?

i done general (MM) alv report
And i display "MATKL" (Material Group) in one of the column.
I don't know why, but when i stand on the data , i get f4 option
, when i asking for f4 i get message, u201CNo input help is availableu201D.
In the definition, I didnu2019t put the matkl original data element ,
I just put char9, i didnu2019t ask/build and double click or
Event for it.
so why do i get f4 option in this column ?
thanks .

Ajay said the correct answer...
chech this sample code:
CLEAR wa_catalog.
wa_catalog-fieldname = 'BANFN'.
wa_catalog-ref_table = 'EBAN'.
APPEND wa_catalog TO catalog.
Edited by: Sebastian Bustamante on Oct 6, 2008 9:40 PM

Why do we get the data from a view to a report.

hi
why do we get the data from a view to a report. is it possible to get the data from a view in all the cases?

hi Jyotssna,
Suppose you are planning to get the data from multiple tables then you got to specify seveal condtions and make use of joins which results in poor performance in fetching the data . In order to improve the performance we make use of views where the conditions of different tables are defined and the data is fetched accordingly.
Regards,
Santosh

Why do I get a dotted orange render line

Similar Messages

Maybe you are looking for