Why do I get a foggy picture when I  use my flash on my phone

Why does my iphone have foggy pictures when I use my flash?

If you are using a protective case on your iPhone, make sure it is not interfering with the flash.

Similar Messages

  • Why do my pics come out blue and hazy when i use my flash on my phone

    Is there something i can do to keep my  pics come out blue and hazy when i have my flash on?

    It could be the case you are using.  If your iPhone is in a case, take it out of the case and try taking a flash photo again.  If it comes out ok, you may want to get another case.  Look for a case with a larger camera hole.  If you are using a transparent case make sure it is painted black around the camera hole.

  • Why do I get a blue screen when I use the NIDAQ driver.

    I get IRQL_NOT_LESS_OR_EQUAL.
    Address fc792324 has base at fc6f8000 Nidaq32.sys and Address fc7028e3 has base at fc6f8000 Nidaq32.sys.
    The system is running on Windows NT 4.0. The application is built using Application Builder and LabView 5.1.1. The NIDAQ 6.9.0 is used.
    Please help me.

    uffe:
    You seek...Yoda...Help you...I...will..
    This is a kernel mode problem with your NIDAQ32.SYS driver. I believe
    that you can pretty much rule out problems with LV5.1.1 or app
    builder. Your problem
    You have run into a classic BSOD message. It may not always occur so
    it can be really frustrating to diagnose. There may be some
    workarounds you can implement at the application level but it still
    needs to be fixed at the kernel (O/S) level so you're going to need to
    contact NI.
    I've had this same problem error message in the past but not with DAQ
    cards. As I recall, in one case there was a problem with a spinlock
    in the SCSI driver (.sys) file which protected access to the hardware
    I was using.
    What is a spin lock? A spin lock is a special synchronization
    construct used by device driver developers to protect access to
    critical sections of their code usually for hardware access. It is
    the kernel mode equivalent to a VISA resource lock or a semaphore in
    LabVIEW.
    For more on spin locks see:
    http://msdn.microsoft.com/library/default.asp?url=/library/en-us/kmarch/hh/kmarch/k101_97hu.asp
    Work-around Possibility #1: Do you have two different parts of your
    code trying to access the DAQ card simultaneously? If so, providing
    your own VISA resource locks or semaphores at the application level
    may cure the problem even if the kernel mode driver is failing to
    protect access to the card like it should.
    Even if this fixes the problem PLEASE report it to NI so that they can
    fix it properly in the .sys file and let other users know that the
    workaround I suggested works.
    See:
    http://msdn.microsoft.com/library/default.asp?url=/library/en-us/network/hh/network/103ndisx_7mk2.asp
    Work-around Possibility #2: I don't know the details of setting up
    your DAQ card so if this question doesn't make any sense don't worry
    about it. Are you setting up the card with some empty array, zero
    memory size, or empty string value or something? I had this problem
    with a reflective memory card driver.
    Sometimes this can screw up a driver that isn't checking for this sort
    of thing with the result of it trying to reference a null ptr or
    something. Again, even if you fix the problem by error checking the
    values before you give them to the DAQ driver VI, make sure you tell
    NI about it.
    This explanation also jibes with what Microsoft has to say on
    IRQL_NOT_LESS_OR_EQUAL. See:
    http://msdn.microsoft.com/library/default.asp?url=/library/en-us/w2kmsgs/6077.asp
    3) There may be other explanations for your problem but these are two
    that I've run into personally. Try going to www.microsoft.com and
    doing a search on IRQL_NOT_LESS_OR_EQUAL if my two possibilities
    aren't the cause of your problem.
    4) Make sure you have the latest driver from NI for the NIDAQ. NI may
    have already fixed your problem in a later version of the NIDAQ
    driver.
    5) Also I would recommend making sure that you have the latest service
    pack (SP6A) installed or that you go ahead and upgrade to Win2000. As
    I recall when I had my one of my driver problems it was with an
    earlier SP release and upgrading SP's helped.
    6) If none of these suggestions help, you need to call NI help line
    (800-IEE-E488) and report this to see if they know about it so that
    they can give you a work around and see if they can recreate the
    problem and then fix it.
    Doug De Clue
    LabVIEW developer
    [email protected]
    uffe wrote in message news:<[email protected]>...
    > I get IRQL_NOT_LESS_OR_EQUAL.
    > Address fc792324 has base at fc6f8000 Nidaq32.sys and Address fc7028e3
    > has base at fc6f8000 Nidaq32.sys.
    >
    > The system is running on Windows NT 4.0. The application is built
    > using Application Builder and LabView 5.1.1. The NIDAQ 6.9.0 is used.
    >
    > Please help me.

  • Why do I get a memory leak when I use the Write Data Storage VI in a loop

    I have a large application that I am collecting various data points from. For the most part they are simple scalar values that need to be logged on a regular basis.  I was attempting to use the new TDM files and the storage VI's  I though everything was working until I looked at the taskmanager and noticed that when the logging loop ran my CPU eventually went to 100% and the process memory grew from about 80,000K to 100,000K and eventually locks up the system. 
    I am using a state machine arch. 
    State 1 - open file (open create) mode) 
    State 2 - Write Channel Group Properties
    State 3 - Loop writes 24 distinct data points to a TDM files in append mode
    State 3 - Repeats [creating new rows of the same 24 data point (wait time about 1 sec)]
    State 4 - Close file on exit.
    Any help on this problem would be appreciated.

    The way I see it, it should be this way.
    Message Edited by Pana-man on 09-30-2005 08:15 PM
    Message Edited by Pana-man on 09-30-2005 08:18 PM
    Paul <--Always Learning!!!
    sense and simplicity.
    Browse my sample VIs?
    Attachments:
    nextWeek.jpg ‏43 KB

  • Why do i get this error messgae when trying to back up my i phone. "I tunes could not back up the i phone because the back up could not be saved on the computer"

    Hi Has anyone had the error message above when syncing I Phone 4 and if so, how did you fix?
    Thanks
    Colin

    To resolve this issue, delete the backup in iTunes Preferences and then create a new backup. If you would like to retain a copy of the backup, you can move the backup file to a different location. The backup is located in the locations below.
    On a Mac:
    /Users/[username]/Library/Application Support/MobileSync/Backup/
    On Windows XP:
    \Documents and Settings\[username]\Application Data\Apple Computer\MobileSync\Backup\
    On Windows Vista and Windows 7:
    \Users\[username]\AppData\Roaming\Apple Computer\MobileSync\Backup\
    To delete the backup file:
    Open iTunes Preferences by choosing iTunes > Preferences (Mac) or Edit > Preferences (Windows).
    Select Devices.
    Select the device backup to delete.
    Click Delete Backup. iTunes will ask if you are sure you want to delete the backup. Click Delete Backup.
    Click OK.
    To manually create a new backup, right-click (or Control-click) iPhone on the left side of the iTunes window under Devices and choose Back Up from the shortcut menu.
    Please let me know if this resolves your issue.

  • I get a red photo when i use camera flash at night.

    how can i fix this?

    You were right!  The case I has was silver and clearly the flash was reflecting on the silver case.  I put the phone back in it's old case and no more white photos!  Thank you so much.
    My next problem is that when I first go to camera the screen is blurry for several seconds before it focuses.  My hands re not shaking.  It also does this when someone calls me and I swipe to answer.  I've only had this since the upgrade to IOS7.  Has anyone else had this problem?

  • Why do i get the following message when i attempt to open my backup file for lightroom cc?  "Lightroom cannot use the catalog named "Lightroom Catalog" because it is not writable and cannot be opened".  This message just started coming  up after downloadi

    why do i get the following message when i attempt to open my backup file for lightroom cc?  "Lightroom cannot use the catalog named "Lightroom Catalog" because it is not writable and cannot be opened".  This message just started coming  up after downloading lightroom cc (previously using lightroom 5)...am i backing up properly or not???

    Open Pictures folder and move the files named lrcat-journal and lrcat.lock to Desktop.
    Make sure that , they are not inside Pictures folder any more and try to open backup from Lighrtroom and check..
    Any LRcat file with .lock extension , move it to Desktop.

  • Why do I get a black version when I convert my document to PDF?

    I have been using Microsoft Publisher 2007 with XP to produce a newsletter for over 11/2 years. Today when I converted the file to PDF it is black with all kinds of wierd colors. It looks nothing like the document I produced. This has never happened before. The PDF version last month looked exactly like the white background document I produced with all the fonts in the right colors, including the pictures. This one looks like a 4 year old got ahold of it and colored it any way she wanted. Nothing looks the same as my document. What happened?

    I found out that if I waited about 15 minutes the PDF file became normal. Thank heavens! I've now sent out my newsletter for my Quilt Club to our 90 e-mail subscribers and all of them I have heard from have gotten it the way I had written it. It must just have been a quirk that happened, but I sure am glad it fixed itself. I only have 5 more newsletters to write and then I am done. Thank Heaven. Thank you for trying to help. I was about to become even more crazed than I get when I have to publish the newsletter. I do it once a month and I never would have volunteered for the 2 year job if I had know how much work it is. My husband walks gently when he knows I am trying to put the newsletter together. I'm not usually crabby, but this has made me a nut case once a month. It's a good thing we've been married for 37 years, so he knows that it is only the "newsletter editor nutty lady" that is getting mad at everything and everyone, including him! Thanks for trying to help. You were the only one that answered. JO
    Date: Tue, 6 Jul 2010 03:29:03 -0600
    From: [email protected]
    To: [email protected]
    Subject: Why do I get a black version when I convert my document to PDF?
    How did you convert the file to PDF?
    >

  • Why do I get a black screen when i click on a PDF in a web page?

    why do I get a black screen when i click on a PDF in a web page? Firefox works as is should.

    Hi,
    From your Safari menu bar click Safari / Preferences then select the Extensions tab. If you have any installed, turn that off, then relaunch Safari. Try a PDF file.
    If it's not Extensions, open a Finder window. Select MacintoshHD in the Sidebar on the left. Now open the Library folder then the Internet Plug-Ins folder. If you see any files such as this:
    AdobePDF Browser or Viewer Plug-in
    Move it to the Trash, relaunch Safari.
    Carolyn :-)

  • Why am I getting an error message when trying to use a template?

    Why am I getting an error message when trying to use a Pages template?

    You are getting an error message because there is an error.
    Knowing wht version of Pages you are using, what template you are attempting to open, and what error message Pages is sending you might help determine why you are getting that specific rror message. Without those, the first sentence above i pretty much all that can be said with any assurance.
    Regards,
    Barry

  • Why do I get "generic error" message when trying to upload a self-created, 1hr .wmv file?

    I went through the forums and made sure that any blocks or copywrites weren't triggered by the file, it's clean and can be opened using a media player and other video editing software like windows MovieMaker. I keep getting "The importer reported a generic error" message and have no idea how to proceed. Can someone please help?

    Re: Why do I get "generic error" message when trying to upload a self-created, 1hr .wmv  file?
    This ARTICLE starts with a checklist on setting up a computer to run PrE best, then goes into a series of links for tuning up one's computer and OS, and then links on troubleshooting.
    There is also a link on posting all necessary info, to help others help you.
    Without knowing much more about your system, it is impossible to say much beyond that WMV's are tough assests to work with, requiring a lot of CPU horsepower.
    Good luck,
    Hunt

  • Why do I get an error message when I try to sync my IPAD with ITunes? Message reads Cannot be used because Apple Mobile Device Service has not been started.

    Why do I get an error message when I try to sync my IPAD with ITunes? Message reads Cannot be used because Apple Mobile Device Service has not been started.

    AMDS for Windows
    http://support.apple.com/kb/TS1567

  • Why am I getting error code 1402 when trying to update adobe reader 10?

    Why am I getting error code 1402 when trying to update adobe reader 10?

    Impossible to guess the "why" with so little information, but this may be helpful if you want to solve the problem: Error 1402 | Error 1406 | Acrobat, Reader

  • Why do I get this error message when I open Organizer in Photoshop Elements 11 "Elements Organizer has stopped working"? My only option is to Close Program so I am effectively locked out of my photo catalogue.  I have reinstalled the program to no avail.

    Why do I get this error message when I open Organizer in Photoshop Elements 11 "Elements Organizer has stopped working"? My only option is to Close Program so I am effectively locked out of my photo catalogue. I have tried reinstalling the program but it made no difference to the error message.
    Could someone help please?  Steph

    Hi,
    Please give a try to Photoshop Elements (PSE) knowledge base. steps mentioned on this and see if it works.
    Regards
    Kishan

  • Why do i get a black screen when i open a pdf file?

    why do I get a black screen when I open a pdf file?

    I'm seeing the same thing, as well as "zombie" AcroRd32.exe *32 processes.
    (I'm seeing this on Windows 7, not Windows 8.)

Maybe you are looking for