Why do I get a Premiere Pro CS4 symbol in the project folder when I save a CC-project?

When I save a project edited with Premiere Pro CC in the project folder I get a symbol for Premiere Pro CS4 instead ot getting the CC-symbol. I can't open the CC-project by clicking the CS4-symbol. Why?

I found out myself that you can choose in the project folder if you want to save the project in CS4 or CC. Sorry I took your time with my problem.

Similar Messages

'Sorry a serious error has occured that requires Adobe Premiere Pro to shut down. We will attempt to save your current project'. What is the solution? (Mac)

There is an error that says when I am open my project: 'Sorry a serious error has occured that requires Adobe Premiere Pro to shut down. We will attempt to save your current project'. What is the solution? (mac)

This happens to me all the time too. When I attempt to reopen, it makes a "copy of" my project. This is frustrating and happiness often.

Sorry, a serious error has occurred that requires Adobe Premiere Pro to shut down. We will attempt to save your current project.

Every time I place a video into the sequence timeline, this error message pops up, "Sorry, a serious error has occurred that requires Adobe Premiere Pro to shut down. We will attempt to save your current project." and then Premiere crashes.
I tried uninstalling all products and then reinstalling them, and the problem is still there.
What can I do to fix this?

@RoninEdits, Thanks for the response.
But yeah, I've tried both the Mercury Playback Engine GPU Acceleration AND Software Only and its the same issue with both.

Why cant I install Adobe Premiere Pro CS4/Encore ?

So a while ago , my encoder for PP stopped working, so I uninstalled everything today, and I re-downloaded the Premiere Pro trial version - but when I install it , after about 3 min it says that it couldnt install Adobe Premiere Pro CS4 & Encore.
when I press the more information botton it shows me a pop-up with this text:
Adobe OnLocation CS4
Fel:
Error 1603. Ett allvarligt fel inträffade under installationen.
Adobe Premiere Pro CS4
Fel:
Error 1603. Ett allvarligt fel inträffade under installationen.
Adobe Dynamiclink Support
Fel:
Error 2.
Adobe Extension Manager CS4
Fel:
Error 2.
Adobe Media Encoder CS4
Fel:
Error 1603. Ett allvarligt fel inträffade under installationen.
Adobe Media Encoder CS4 Additional Exporter
Fel:
Error 2.
Adobe Output Module
Fel:
Error 2.
Photoshop Camera Raw
Fel:
Error 2.
whats wrong?

I'm not sure that I am getting everything from your post.
my encoder for PP stopped working, so I uninstalled everything today, and I re-downloaded the Premiere Pro trial version - but when I install it , after about 3 min it says that it couldnt install Adobe Premiere Pro CS4 & Encore.
Did you have the full-paid version originally, or the "trial?"
If you had the full-paid version, why did you download the trial?
If you had the trial, it does stop working after a period of time - it is limited that way. If you had the trial, you can never install another trial on that machine. It's a one-time deal.
If you did have the trial, you will want to not only uninstall it, but also run the Adobe CS4 CleanScript a few times, before you attempt to install the full-paid version, or you WILL have problems.
Let us know exactly what you had, and what you wish to do now, and someone can help you.
Good luck,
Hunt

Why do i get Adobe premiere pro family with the Edu plan for CC ?

I bought , the edu plan for creative cloud. And all i get is Adobe Premiere pro ? Any ways i could get the Normal version of Adobe Premiere pro ?

As per the EDU plan, users are entitled to get all the applications mentioned in this webpage.
http://www.adobe.com/products/creativecloud/tools-and-services.edu.html
If you are looking for Premiere Pro CS6 instead of Premiere Pro CC, that's not possible in CC as with cloud you will get the latest applications.

Premiere Pro CS4 - Problem with the monitor program.

Hi. I'm not able solving problems with the monitor using PremiereProCS4. When I drag a photo (also only one photo) in the timeline and play it in the monitor program, vision in the monitor program doesn't run:black monitor or a little part of the photo appear... sometimes distort colours. Asus P5QPRO, Intel 9550 and Sparkle Nvidia GeForce 9800 GTX+ 1024 DDR3; last gpu driver and directX are installed. Different configuration of stratch disks were tested. Where am I wrong?

Dear Bill,
thanks for your answer and your article. I tried with your NTSC 4:3 720x480 PAR 0.9 and, "magically", no more problem!!! I used the script pocedure in Photoshop CS4 to resize my images. Now, before starting my workflow and hoping not to overuse your patience, I would like to indicate you my equipment and my target: I use a Canon Eos 7D (generally for still images, 90% are vertical, and just some videos) and I use Premiere Pro CS4 to burn a dvd (normal, 4.7 Gb or double side, more than 8 Gb) with a 16.9 lcd tv (I'm Italian); my camera save as .jpg and .raw (but why use heavy .raw files if I've to redute to 720x480?!??).
So, according to your "everyone wants the highest quality that they can obtain when doing theri videos..." and "your video project may vary, so you will need to plug in the dimensions for YOUR video project in that case", I've a question: which is the best for me?
And then:
1 - Premiere Pro CS4 havn't a batch or a script procedure for still image like PS (only for videos)!?!
2 - Premiere does'nt allow you to import images like 4.181 Kb (a too large dimension file error appears)!
3 - In the timeline of Premiere, after you dragged images, you can select them and right click to perform "resize to frame size": it seems to run good without problem, but what appen to the photo? Which is it's pixel?
4 - In the general preferences of Premiere you can to optimize rendering for "memory" or not: which is the best for you?
5 - I attached file with a screen of something strange in Premiere: dragging an image (the first of the project) in the timeline, the timeline appears distort (you can see the part in the yellow square): then, when I render the project and play in the monitor program, it becames normal.
Thanks!

How to get serial premiere pro cs4

I bought a premiere pro cs6 but I want to install in a machine with 32 bits. I saw in the site that I can install premier pro CS4 and ask a serial for the suport.
Any one have this problem ?

>bought a premiere pro cs6
How/what/when did you buy?
As I remember (this is from 3 years ago, so I may be wrong) the boxed SUITE came with P-Pro CS4
If you bought only P-Pro CS6, especially the current download only version, I don't think CS4 is included

Laptop editing with Premiere Pro CS4: what are the most important specs

Laptop Editing: What are the MOST important specs?
Hello everybody, I have been a long time lurker, but I decided to join in and share my voice.
I've been editing, for a while now, various projects of various lenghts shot on my HV20, on an IMac using Adobe Premiere Pro. Actually, I bought the CS4 Extended Production Suite last year thinking that it made sense to be able to edit, do the coloring and effects+ sound all within the same suite.
AND, it came with OnLocation, wich is, I think, a fantastic tool. I really want to be able to record and monitor my future shoots using OnLocation. I've seen how useful monitors and scopes are on set, and the idea of being able to shoot in HD and actually checking the focus on something larger than a few inches is very appealling!
So a laptop is in my future. Now, what are the most important specs?
I could buy 1) a barely used Macbook pro early 08- 17" HD led display ,4g Ram ddr2 ,nvidia 8600M GT 512 VRAM ,800Mhz BUS, 200G 7200HD
and have enough money left to buy an Apple Display 30" refurb
OR 2) a new Macbook pro 17, 4 g Ram ddr3, 512 VRAm, 4g Ram ddr3, double procsessors 9400M+9600M GT 512 VRAM, 1066 BUS, 500G 7200HD
and wait for a second display!
Plus, of course, a portable External Scratch Drive on the Express Card. Now, if that fast drive is handling the footage, could'nt I settle for a 5400HD in the laptop,, they seem much less prone to problems-clicking noise, heat-than the 7200, especially in the new unibody model. Is 800 versus 1066 BUS a terrible trade-off? In terms of secondary displays , I've heard less than lukewarm things about the new Apple 24 LED (glossy is no-no for me).
My intentions are to make documentaries and short fictions as well. I make a living as an actor so I don't need to be performing as a director/editor business wise!
I do want to explore that side of the craft, in a professional and enjoyable way though. I know that, in addition to the laptop, I will get a MacPro in a few years.
Thanks a lot for the inputs!

Successful video editing (as compared to tear your hair out video editing) requires at least two hard drives... one for all software and one for all data... some people use 3 drives, with data on one and scratch files on the 3rd drive
I'm not sure about software, but everything I've ever read in this forum says 5400 is NOT fast enough for the data drive
If you want to edit video... you have to buy the hardware that works

Premiere Pro CS4 won't boot - keeps crashing when trying to load VST plug-ins

This problem has been a thorn in my side for ages - after a recent software update to some of my VST plug-ins, Premiere Pro will no longer boot. I have to re-name the VSTPlugins folder to a different name. It used to be that it would scan the VSTPlugins folder, crash a bunch of times, then eventually boot up because it figured out that it should ignore that folder. It no longer does this, so I have to manually rename the VSTPlugins folder every time I run premiere.
Obviously, this is a hassle. And is extremely easy to fix from a programming point of view: stop scanning my VSTPlugins folder!!!!!
Is there a workaround for this, or a way to tell Premiere to stop scanning that folder for plug-ins?
Thanks,
rgames

Hi Bill - as I mentioned in my first post, the behavior you describe is what used to happen: keep launching PPro until it finally boots (pretty lame solution, by the way).
However, as I also mentioned, that no longer works. PPro keeps crashing on the same two or three .DLL's and they never get "blacklisted" because it tries again on the next boot. These .dll's were recently updated, so I'm guessing that's why it's an issue now. I was able to boot-crash-boot-crash ... boot-crash-boot before, but not since the .dll's were updated.
The coding solution is so simple I can't believe it's never been implemented: give the option to stop scanning the VSTPlugins folder! Seriously, this is probably 2 minutes of coding for someone who knows where to look in the code.
Anybody have a fix for this problem?
Thanks,
rgames

"sorry, a serious error has occurred that requires Adobe premiere pro to shut down. We will attempt to save your current project" What should I do?

j@m,

More information needed for someone to help... please click below and provide the requested information
-Premiere Pro Video Editing Information FAQ http://forums.adobe.com/message/4200840
Especially needed is...
•What is your exact brand/model graphics adapter (ATI or nVidia or ???)
•What is your exact graphics adapter driver version?
•Have you gone to the vendor web site to check for a newer driver?
•For Windows, do NOT rely on Windows Update to have current driver information
•-you need to go direct to the vendor web site and check updates for yourself
•nVidia Driver Downloads http://www.nvidia.com/Download/index.aspx?lang=en-us
•ATI Driver Autodetect http://support.amd.com/en-us/download/auto-detect-tool

Premiere Pro CC (2014 version) crashes (beach ball) when trying open certain large Projects

Hi,
I'm currently editing for a TV channel using the latest version of Premiere Pro CC and certain projects (it seems to be with ones with a lot of footage) crash when I open it. Basically, it doesn't even load all the footage up, one that crashed just now said it had around 140 files left to load, but the beach ball arrives and I sat there waiting for half an hour and nothing happen, apart from the beach ball spinning.
Now, we're on an high spec iMac 3.5Ghz i, 32GB ram, 512gb Flash Storage, 4GB Geforce Graphics card, so I don't think the issue can be the mac, unless the macs faulty, but seems to work fine, when I create new projects etc.
Also, their workflow uses USB 3.0 drives, could this be the bottle-neck making them crash? That being said I've edited lots off my USB 3.0 drive at home and my desktop is a lot weaker then this iMac.
Any ideas what the issue may be?
Thank you,
Matt

Hi Matt,
Please mention the exact version of Premiere Pro. Assuming you are using 2014 version, please try some steps mentioned below.
1. Clean the media cache files by navigating to /Users/User Name/Library/Application Support/Adobe/Common
2. Check the version of the drivers of your NVidia card. So, go to Apple Menu>System Preferences and check if you have a CUDA Preference pane if it is not there then go to the below link and update the Card to latest drivers.
CUDA Drivers for MAC Archive | NVIDIA
3. Also, please mention if you have any third party plugins used in the project. If yes, then try to update those Plugins or copy and paste those plugins to some other location and Trash them from MediaCore of Premiere Pro. The location of third party plugins is mentioned below.
Startup Drive or MAC HD /Library/Application Support/Adobe/Common/Plug-ins/7.0
Hope it helps.
Regards,
Vinay

My adobe premiere pro Cs4 was working since 2008 but now i can load one project but when i click to anyone menu the screen become white and cs4 not reply?why?

pourquoi lorsque je charge un projet sur cs4 il apparait,mais dés que je clique sur une fonction mon écran devient blanc et le logiciel ne répond plus?je travaille avec ce logiciel depuis 2008.Merci de bien vouloir m'éclairer.André

Nobody can tell you anything without proper system information and other details.
Mylenium

Premiere Pro CS4.2.1 crashes/jittery playback when scrubbing timeline

With just PP CS4.2.1 open, my program crashes when scrubbing the timeline as well as exhibits jittery playback after scrubbing the timeline. This is a PC system, Microsoft Vista Business 64bit with SP2, 500GB SATA2 hard drive (system), (3) 1-TB SATA2 hard drives (storage), (2) Intel Xeon Quad Core E5560, 2.8 ghz processors, 8 mb cache.
I have (2) workstations with similiar setups and show the same issue. It doesn't happen with any consistency but requires constant control-S saves to make sure the project doesn't crash when you don't want it to.
I just converted from PP 1.5.1 to this with a complete new setup. This setup (on both machines) has proven to be less stable than the older system with 1.5.1
Figure it's something similar with system build as it's happening on both machines and/or it's something in/with Premiere CS4.

Read Bill Hunt on a file type as WRAPPER http://forums.adobe.com/thread/440037?tstart=0
What is a CODEC... a Primer http://forums.adobe.com/thread/546811?tstart=0
What CODEC is INSIDE that file? http://forums.adobe.com/thread/440037?tstart=0
Then, Work through all of the steps (ideas) listed at http://ppro.wikia.com/wiki/Troubleshooting
If your problem isn't fixed after you follow all of the steps, report back with ALL OF THE DETAILS asked for in the FINALLY section, the questions at the end of the troubleshooting link... most especially the codec used... see Question 1

Premiere Pro CS4 Crashes all the time

CS3 worked well for me, but I updated my system to CS4 and no matter what I do, the program crashes and gives me the error screen. I updated the program and still have this error happening. Is there any fix for this? Any help would be greatly appreciated.

>Make sure you update all your hardware drivers.
Which is what the link I provided recommends among many other things. ;)
We still need a lot of details to try to help the OP.
Cheers
Eddie
PremiereProPedia (
RSS feed)
- Over 300 frequently answered questions
- Over 250 free tutorials
- Maintained by editors like
you
Forum FAQ

Is iMac Quad Core Good Enough for AVCHD In Premiere Pro CS4

Hi there.
I have a quick question....
I'm thinking about buying a new 27" iMac so that I can edit my AVCHD files in Premiere Pro CS4. I'm presently using a Macbook Pro with a Dual Core and the video playback in Premiere Pro is choppy.
I also read that Premiere Pro doesn't support AVCHD without an expensive plugin.
Does anyone know if the iMac, with the specs below, will playback AVCHD in PP smoothly?
2.8GHz Quad-Core Intel Core i7
8GB 1066MHz DDR3 SDRAM - 4x2GB
1TB Serial ATA Drive
ATI Radeon HD 4850 512MB
Thanks,
David

Hello again.
I have now upgraded to an iMac, quad core i7 with 8GB of RAM. I have my AVCHD footage on a striped RAID hard drive connected via FW800 and the scratch disks on a separate 1TB hard drive that is not striped and that is connected via USB. I am using Premiere Pro CS4 to edit the footage.
When I play the video in PP, it warps on and off. It's better than when I was using my Macbook Pro dual core 4GB RAM, but it's still not playing smoothly. I have the presets set to 1080i30(60i), which is correct for this footage.
I would prefer to not have to convert the AVCHD footage, unless there is a clear advantage to doing this.I have tried converting to a P2 file, but it increases the file size from 284MB to 2.8GB.
Any suggestions?
Thanks,
David

Why do I get a Premiere Pro CS4 symbol in the project folder when I save a CC-project?

Similar Messages

Maybe you are looking for