Why do I get a prompt to authorize when switching from an HTTP GET to an HTTP POST?

Have you created an iCloud account? This is not the account or ID you use for iTunes. And where exactly are you turning on notes? In what area within settings of your devices?

Similar Messages

Getting the "beach ball" freezes, when switched to Intel 330 120gb SSD in my blackbook (2006, C2D, 10.6.8)

Getting the "beach ball" freezes, when switched to Intel 330 120gb SSD in my blackbook (2006, C2D, 10.6.8).
But switching to Crucial M4 SSD, everything is just fine & great~
Any genius, know why?
Do I need to enable TRIM for Intel 330 SSD (Sandforce)?
THX for help!!
Info:
MacBook (Black, 2006, C2D, GMA950, 4gb Ram, OSX 10.6.8)
-Both tried clone OS & clean install OS

I just installed a 120 GB 330-series Intel SSD in my late-2008 aluminum MacBook and I have experienced the beachball problem on a fresh install of Lion and a fresh install of Mountain Lion. I never saw this behavior with my old Western Digital 500 GB HDD. Does anyone have any suggestions about how to avoid the "freezes" associated with the 330-series SSDs?

I'm getting message Lightroom encountered error when reading from its preview cache needs to quit. Lightroom 5 on Windows 7

I'm getting message Lightroom encountered error when reading from its preview cache needs to quit. Lightroom 5 on Windows 7

To delete the preview cache, do this:
1. Quit Lightroom.
2. In your Operating System, locate your Lightroom catalog. Typically catalogs are in /Pictures/Lightroom on Mac and My Pictures\Lightroom on Windows.
3. Find the folder whose name ends with "Previews.lrdata" and delete it. (note, you may also have a folder whose name ends with "Smart Previews.lrdata." You shouldn't need to delete that one.)

When exporting from Imovie I get the following error? OSStatus error -2009

when exporting from Imovie I get the following error? OSStatus error -2009

Hi
Apple Support pages says.
Error 2000-2009 (2001, 2002, 2005, 2006, 2009, and so on)
If you experience this issue on a Mac, disconnect third-party devices, hubs, spare cables, displays, reset the SMC, and then try to restore. If you are using a Windows computer, remove all USB devices and spare cables other than your keyboard, mouse, and the device, restart the computer, and try to restore. If that does not resolve the issue, try the USB issue-resolution steps and articles listed for Error 1604 above. If the issue persists, it may be related to conflicting security software.
Yours Bengt W

Personal Hotspot switches from LTE and gets stuck in 3G. Won't switch back

Hi There,
My Personal Hotspot on my iPhone 6 switches from LTE and gets stuck in 3G service. The hotspot stays in the 3G service even when I'm back in an LTE zone. The only reason I know I'm back in an LTE service zone is because if I disable hotspot, put my phone in airplane mode, and turn it back on I get LTE service. Please note that if I wasnt using personal hotspot the phone seems to find LTE, go to 3G, and then back to LTE just fine.
This happens while I'm commuting to work on the train and consistently pass between multiple cell phone towers.
Any help?
Thanks!!!

JeffinSF wrote:
To recreate this...First make sure WiFi is off and that you have 3G turned on (go to Settings-->General-->Network) and that you're in a real 3G area (you'll see a "3G" symbol in the upper left of the screen
Then turn off 3G (go to Settings-->General-->Network and turn off 3G.) Wait a few seconds for the phone to switch to EDGE (you'll see the "E" indicator in the upper left of the iPhone screen once it's on EDGE). Then simply go back and turn 3G back on in Settings->General->Network. The phone SHOULD automatically reselect 3G and you'd see the "3G" again in the upper left part of the screen but instead you'll just see the same "E" in the upper left because it's not switching. To force the switchback to 3G after performing the above example, turn on Airplane mode and then turn it back off after a few seconds. For me, this always resets the radios such that 3G will again appear in the upper left of the screen and the phone will run on 3G. Otherwise it will just sit on EDGE even though I've turned 3G on. Strange but consistent.
I just tried this and my IP4 switched to 3G after turning back on the 3G and accessing a web site. It took about 5 seconds, but it did switch on its own. It did not happen just sitting there, I had to make it do some work (by loading data).

How do I authorize my new computer when I'm not getting a prompt to authorize?

I'm trying to authorize my new computer, however I'm not being prompted with a tab to authorize! Also I need to deactivate my old computer. How do I do these?

Log into iTunes Store on your old computer. Select De-authorize This Computer from the Store menu.
Log into iTunes Store on your new computer. Select Authorize This Computer from the Store menu.
About De-authorizing Computers (contributed by user John Galt)
You can de-authorize individual computers, but only by using those computers. The only other option is to "de-authorize all" from your iTunes account.
1. Open iTunes on a computer
2. From the Store menu, select "View my Account..."
3. Sign in with your Apple ID and password.
4. Under "Computer Authorizations" select "De-authorize All".
5. Authorize each computer you still have, as you may require.
You may only do this once per year.
After you "de-authorize all" your authorized computers, re-authorize each one as required.
If you have de-authorized all computers and need to do it again, but your year has not elapsed, then contact: Apple - Support - iTunes - Contact Us.
Also, see iTunes Store- About authorization and deauthorization.

Reports with prompting stop working when moved from Crystal10 to crystal 11

Issue:
We are having trouble with Crystal Reports XI. It appears that the Crystal 10 runtime included the ability to process reports that used prompting. If we run the same report with the Crystal XI runtime, it fails.
I can send a sample of the report.
Error Dialog:
Title: Internet Explorer Script Error
Error Details:
An error has occurred in the script on this page
Line: 1
Char: 1
Error: invalid character
Code: 0
URL: file: /// C:/Program%20Files/Business%20Objects/3.0/crystalreportsviewers11/prompting/js/promptengine_strings_en.js
Do you want to continue running scripts on this page?
Yes/No
Our Configuration:
We use Merge Modules that install Crystal Reports through the browser via a CAB file that we created. It runs a setup executable
The setup executable project that installs CR XI uses the following Merge Modules:
CrystalReports11_RDC_Reportengine.msm
CrystalReports11_RDC_Runtime.msm
CrystalReports11_HotFix_Merge.msm (This is contrived by us from one of your hot fixes)
Observation:
When the install is finished, the folder structure under u2026. Crystalviewers11/prompting do not have any files like they do if we install the development environment.
Question:
What do we need to do to correct this situation?
*why the reports with*
*prompting stops working when it is moved from a Crystal 10 to Crystal 11*
*environment. I believe that it has something to do with Merge Modules*
*because the files under the prompting folder do not populate with the*
*merge module like they do with the full install of Crystal Reports.*
Please help.
Best Regards,
Peter Freeman
Edited by: Vivek Kumar Sharma on May 19, 2009 3:43 PM

We have JDK 1.6 installed. The License Merge Module is not related to
this issue.
The files under \Program Files\Common Files\Business
Objects\3.0\crystalreportviewers11\prompting are not being installed.
If we copy files, into this folder structure the reports work.
One of the Business Object's Merge Modules should install the files
there rather than just an empty folder structure.
I got was able to figure out how to enter a customer support message.
They said that they could not support us because we were not on CRXIR2
(Crystal Reports 11 Release 2).
I found a download for CRXIR2SP4 (same thing service pack 4).
I installed it the Merge Module names changed to include a "_5"
Was:
CrystalReports11_RDC_Reportengine.msm
CrystalReports11_RDC_Runtime.msm
CrystalReports11_HotFix_Merge.msm (This is contrived by us from one of
your hot fixes)
Now:
CrystalReports11_5_RDC_Reportengine.msm
CrystalReports11_5_RDC_Runtime.msm
CrystalReports11_5_RDC_License.msm (should have been included)
*CrystalReports11_HotFix_Merge.msm (not needed anymore)
I will try to put a installer together with these. If this work there
will be some complexity around uninstalling the old one and installing
the new one.

Why is my ipad still using battery power when switched off & locked away with no one using it?

Why is my IPad still discharging battery when switched off and locked away - with no one using it? Charged it to 100% on holiday and locked in safe. 2 days later it was at 76%!

How is it "switched off"? Are you pressing the button on the top so the screen goes black? If so, that isn't shut off, but put to sleep. I will still be doing things in the background and using battery power.
To shut it fully off, press and hold the button on top, you will get a notification on the screen that says "Slide to power off". Slide the button and it will turn completly off.
If this is how you switched it off, let us know and we will see what else we can figure out.

Why is my Macbook Pro running so slow when returning from sleep mode?

I got my new Macbook this past Christmas so it is about two months old. I have the 13" Macbook with the standard 4GB of RAM (not sure if that matters), but when I got my mac I downloaded a bunch of games and such which may have slowed it down initially, though I have downloaded OnyX and Appzapper to uninstall apps and clean my computer. Also I have deleted EVERYTHING from "Login Items" which I thought might help. Basically whenever I am done using my computer I just shut the screen, I don't shut it down or actually click "Sleep Mode" so I'm not sure if shutting the screen puts it in "Sleep Mode," but whenever I open my computer back up I get that spinning loading icon when I click on anything on my desktop and it usually takes 5-10 minutes of this super slow loading before I can actually use my computer. Not sure what the deal is but it is clearly super annoying and I'm hoping to find out how to get around this. I have six 2GB sticks of RAM that I am hoping to trade for two 4GB sticks of RAM to speed up my computer but I am not sure if that would even fix my problem. This is my first Macbook, besides my mothers Mac desktop that I have been using for years throughout High School, but I am a windows guy. I consider myself pretty good with computers, not an expert but I can fix 95% of the problems I encounter, but this one has been stumping me! Thanks a million in advance!

Hello Linc -
I hope you don't mind but I have a similar issue. Might I be able to enlist your assistance with this issue? I've done as you said, and I have copied the approximate range of messages during my most recent incident. What I'm noticing is that my Mac is staying busy even while asleep. I'm concerned about this behavior, hoping you might be able to help debug the situation and set me on a good path to resolution.
Here's my data (I don't know for certain that I grabbed the proper amount or range of data, but hoping this will help):
6/4/14 10:06:06.287 PM mds[38]: (Warning) Server: No stores registered for metascope "kMDQueryScopeComputer"
6/4/14 10:06:06.519 PM soagent[231]: [Warning] Services all disappeared, removing all dependent devices
6/4/14 10:06:06.881 PM HyperDock Helper[275]: couldn't get dock children!
6/4/14 10:06:08.414 PM syncdefaultsd[264]: [AOSAccounts] : IAAppProvider::CopyAccountUIDForUser Timed out waiting
6/4/14 10:06:09.178 PM com.apple.internetaccounts[290]: [Warning] Services all disappeared, removing all dependent devices
6/4/14 10:06:12.882 PM HyperDock Helper[275]: couldn't get dock children!
6/4/14 10:06:12.882 PM HyperDock Helper[275]: empty dock rect!
6/4/14 10:06:13.091 PM com.apple.SecurityServer[27]: Session 100014 created
6/4/14 10:06:15.150 PM com.apple.time[205]: Interval maximum value is 946100000 seconds (specified value: 9223372036854775807).
6/4/14 10:06:17.089 PM com.apple.NotesMigratorService[318]: Joined Aqua audit session
6/4/14 10:06:24.000 PM kernel[0]: CODE SIGNING: cs_invalid_page(0x1000): p=330[ksadmin] final status 0x0, allowing (remove VALID) page
6/4/14 10:06:25.057 PM com.apple.SecurityServer[27]: Session 100003 created
6/4/14 10:06:26.712 PM com.apple.IconServicesAgent[293]: main Failed to composit image for binding VariantBinding [0x143] flags: 0x8 binding: FileInfoBinding [0x351] - extension: log, UTI: com.apple.log, fileType: ????.
6/4/14 10:06:26.712 PM quicklookd[307]: Warning: Cache image returned by the server has size range covering all valid image sizes. Binding: VariantBinding [0xa03] flags: 0x8 binding: FileInfoBinding [0x903] - extension: log, UTI: com.apple.log, fileType: ???? request size:128 scale: 1
6/4/14 10:06:27.190 PM com.apple.IconServicesAgent[293]: main Failed to composit image for binding VariantBinding [0x24b] flags: 0x8 binding: FileInfoBinding [0x353] - extension: jpg, UTI: public.jpeg, fileType: ????.
6/4/14 10:06:27.191 PM quicklookd[307]: Warning: Cache image returned by the server has size range covering all valid image sizes. Binding: VariantBinding [0xc03] flags: 0x8 binding: FileInfoBinding [0xb03] - extension: jpg, UTI: public.jpeg, fileType: ???? request size:128 scale: 1
6/4/14 10:06:27.594 PM HyperDock Helper[275]: dockRunloop exited!
6/4/14 10:06:27.687 PM WindowServer[103]: disable_update_timeout: UI updates were forcibly disabled by application "Dropbox" for over 1.00 seconds. Server has re-enabled them.
6/4/14 10:06:28.666 PM AddressBookManager[316]: Validate metadata timed out, cancelling
6/4/14 10:06:30.082 PM WindowServer[103]: common_reenable_update: UI updates were finally reenabled by application "Dropbox" after 3.40 seconds (server forcibly re-enabled them after 1.00 seconds)
6/4/14 10:06:39.079 PM Dropbox[274]: PyObjCPointer created: at 0xcc3fc88 of type {OpaqueJSContext=}
6/4/14 10:06:47.000 PM kernel[0]: fsevents: watcher dbfseventsd (pid: 347) - Using /dev/fsevents directly is unsupported. Migrate to FSEventsFramework
6/4/14 10:06:58.966 PM Dropbox[274]: ICARegisterForEventNotification-Has been deprecated since 10.5. Calls to this function in the future may crash this application. Please move to ImageCaptureCore
6/4/14 10:07:07.421 PM Creative Cloud[252]: objc[252]: Class HTTPHeader is implemented in both /Applications/Utilities/Adobe Creative Cloud/utils/AdobePIM.dylib and /Applications/Utilities/Adobe Creative Cloud/AppsPanel/AppsPanelIL.dylib. One of the two will be used. Which one is undefined.
6/4/14 10:07:07.421 PM Creative Cloud[252]: objc[252]: Class ProxyManager is implemented in both /Applications/Utilities/Adobe Creative Cloud/utils/AdobePIM.dylib and /Applications/Utilities/Adobe Creative Cloud/AppsPanel/AppsPanelIL.dylib. One of the two will be used. Which one is undefined.
6/4/14 10:07:13.408 PM Creative Cloud[252]: file path : file:///Applications/Utilities/Adobe Creative Cloud/ACC/resource/SelfUpdate/html/selfUpdateScreen.html?locale=en_US
6/4/14 10:07:13.479 PM Creative Cloud[252]: size: 440.000000, 664.000000
6/4/14 10:07:14.280 PM apsd[63]: Failed to send activation record to service com.apple.ManagedClient.enroll
6/4/14 10:07:16.843 PM Adobe CEF Helper[359]: Internals of CFAllocator not known; out-of-memory failures via CFAllocator will not result in termination. http://crbug.com/45650
6/4/14 10:07:26.859 PM Adobe CEF Helper[359]: The function `CGFontSetShouldUseMulticache' is obsolete and will be removed in an upcoming update. Unfortunately, this application, or a library it uses, is using this obsolete function, and is thereby contributing to an overall degradation of system performance.
6/4/14 10:07:28.000 PM kernel[0]: CODE SIGNING: cs_invalid_page(0x1000): p=364[ksadmin] final status 0x0, allowing (remove VALID) page
6/4/14 10:07:29.000 PM kernel[0]: CODE SIGNING: cs_invalid_page(0x1000): p=365[ksadmin] final status 0x0, allowing (remove VALID) page
6/4/14 10:07:29.000 PM kernel[0]: nspace-handler-unblock: did not find token 1531
6/4/14 10:07:29.821 PM com.apple.mtmd[37]: handler unblock failed. (status=-1/errno=2/token=1531/fd=4)
6/4/14 10:07:31.773 PM System Events[363]: .sdef warning for part of complex type 'any | number | boolean | date | list | record | text | data' used in suite 'Property List Suite': 'data' is not a valid type name.
6/4/14 10:07:31.773 PM System Events[363]: .sdef warning for type 'text | missing value | any' attribute 'uniqueID' of class 'XML element' in suite 'XML Suite': AppleScript ID references may not work for this property because its type is not NSNumber- or NSString-derived.
6/4/14 10:08:10.728 PM WindowServer[103]: disable_update_timeout: UI updates were forcibly disabled by application "Google Chrome" for over 1.00 seconds. Server has re-enabled them.
6/4/14 10:08:13.572 PM WindowServer[103]: common_reenable_update: UI updates were finally reenabled by application "Google Chrome" after 3.85 seconds (server forcibly re-enabled them after 1.00 seconds)
6/4/14 10:08:24.544 PM com.apple.time[205]: Interval maximum value is 946100000 seconds (specified value: 9223372036854775807).
6/4/14 10:08:33.130 PM VDCAssistant[370]: AVF encoder error: fail to create accelerator instance
6/4/14 10:08:33.432 PM VDCAssistant[370]: AVF encoder error: fail to create accelerator instance
6/4/14 10:08:42.340 PM ntpd[131]: ntpd: time set +0.479444 s
6/4/14 10:08:42.372 PM com.apple.time[205]: Interval maximum value is 946100000 seconds (specified value: 9223372036854775807).
6/4/14 10:08:42.375 PM com.apple.time[205]: Interval maximum value is 946100000 seconds (specified value: 9223372036854775807).
6/4/14 10:09:04.258 PM mds[38]: (Normal) Volume: volume:0x7fc5fc894000 ********** Bootstrapped Creating a default store:0 SpotLoc:(null) SpotVerLoc:(null) occlude:0 /Volumes/firmwaresyncd.is9q0A
6/4/14 10:09:55.988 PM fontd[212]: BUG in libdispatch client: dispatch_mig_server: mach_msg() failed (ipc/send) invalid memory - 0x1000000c
6/4/14 10:10:00.000 PM kernel[0]: process Creative Cloud[252] caught causing excessive wakeups. Observed wakeups rate (per sec): 175; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 45095
6/4/14 10:10:00.943 PM ReportCrash[380]: Invoking spindump for pid=252 wakeups_rate=175 duration=258 because of excessive wakeups
6/4/14 10:12:07.846 PM ntpd[131]: FREQ state ignoring +0.080428 s
6/4/14 10:12:45.031 PM mds_stores[89]: (Error) SecureStore: Access token 7 changed uid from -1 to 501
6/4/14 10:13:16.989 PM ntpd[131]: FREQ state ignoring +0.109128 s
6/4/14 10:14:53.101 PM ntpd[131]: FREQ state ignoring +0.148578 s
6/4/14 10:17:30.190 PM ntpd[131]: FREQ state ignoring +0.207557 s
6/4/14 10:20:22.536 PM configd[57]: network changed: v4(en1-:192.168.1.159) v6(en1:2602:306:ce95:48a0:1240:f3ff:fea1:8e1e) DNS! Proxy SMB
6/4/14 10:20:22.541 PM netbiosd[184]: network_reachability_changed : network is not reachable, netbiosd is shutting down
6/4/14 10:20:25.616 PM configd[57]: network changed: v4(en1+:192.168.1.159) v6(en1:2602:306:ce95:48a0:1240:f3ff:fea1:8e1e) DNS! Proxy SMB
6/4/14 10:20:29.454 PM apsd[63]: Unrecognized leaf certificate
6/4/14 10:20:32.011 PM com.apple.launchd.peruser.501[201]: (com.google.Chrome.31536[278]) Job appears to have crashed: Bus error: 10
6/4/14 10:20:34.500 PM ReportCrash[410]: Saved crash report for Google Chrome[278] version 35.0.1916.114 (1916.114) to /Users/colton/Library/Logs/DiagnosticReports/Google Chrome_2014-06-04-222034_Coltons-MacBook-Pro-2.crash

Crystal Reports prompting for creds when viewed from BO 4

The environment:
Business Objects Enterprise 4, sp2 patch 8
SAP ECC 6.0, kernel 701, sup. pkg. lvl 137
This is a new BOE 4 installation on a test system. The BOE installation has been configured to use Windows AD authentication with SSO. When I run a Crystal Report that is based on SAP ECC data, I am prompted for credentials. So I used the following document to configure BOE for SSO to DB:
http://wiki.sdn.sap.com/wiki/display/BOBJ/HowtosetupSSOagainstSAPBWinSBOBI4.0forLDAPusers
This didn't fix the problem. SAP ECC reports in BOE still prompt for creds when viewed. SAP Authentication is verifiably working, but I'm not sure if SSO to DB is working. One thing I've noticed is that when I log in to BOE using SAP authentication and view the report, I'm not prompted for creds. In BOE I added my Windows AD acct as an alias in my SAP acct, but I may have either done this incorrectly, or there may be something I need to do in addition.
question 1: Is there an easy way to verify if SSO to DB is working correctly?
question 2: In CMC --> Authentication --> SAP --> Entitlement Systems --> User Name, I'm assuming that this is an SAP user name. What roles/profiles does this account need? Should it be a dialog acct?
question 3: Our ECC system is configured to use SNC. Do I need to configure SNC in BOE for SSO to DB to work?
question 4: I added my Windows AD user as an alias on my SAP user record. I'm not sure this is correct... can someone verify?
Any help or suggestions are much appreciated.

Thanks, Ingo. Once I got snc configured, everything began working wonderfully.
I used this document as a guide:
https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/sno/ui_entry/entry.htm?param=69765F6D6F64653D3030312669765F7361706E6F7465735F6E756D6265723D3134343630363726

When downloading photos I get "LR encountered and error when reading from its preview cache --?

When attempting to download images I get "LR encountered an error when reading f rom its preview cache and needs to quit. Only downloads ~ 10 of 300 photos and shuts down. What to do?

Have you tried to delete the preview cache?
Axel

Flex GUIs get a bad performance in normal screen mode when switched from full screen mode

Hi, there :
I encountered an odd situation and it is only happens on IE. Our project is a Flash 3D Game using Stage3D, and the Game's GUIs are created by CS6. When our game switch from the full screen( StageDisplayState.FULL_SCREEN_INTERACTIVE or StageDisplayState.FULL_SCREEN ) to normal screen ( StageDisplayState.NORMAL ), the performance of the Game GUIs decline to approximate a half FPS of full screen mode. But this condition is only happens on IE.
The Game is normal screen when it is initialized and the performance is as same as fullscreen. The performance degradation only happens after switching to normal screen mode from full screen mode.
p.s. : When the mouse is out of the view, the performance become better, from 20 fps up to 50 fps. But is still not as same as the original 60 fps.
p.s. 2 : My colleague told me the Flash Pro CS6 be used to built a single swc file per GUI, and then package all ui swc files to one swc file by Flex Framework SDK( the command is "compc" ). and the IE version = 9.0.8112.16421, the Flash Player Version = 11.6.602.155.
p.s. 3 : I have utilized Adobe Profiler Scout to observe the application, and I found that when it switches to normal screen mode from full screen mode, the time 「Waiting for GPU」 in 「Inactive」 grows up from 10ms to approximate 30ms which is triple. And in the 「Activity Sequence 」tab, it shows that the 「Waiting for GPU」 happens in the 「Copying to screen 」in 「DisplayObject List」.
Thanks

This does sound like a specific bug with IE. It would be great if you could file a bug report here (https://bugbase.adobe.com/), so we can get somebody to look into it.
btw, Flex is really not a good framework for games - it's really slow and heavyweight. If you're just wanting some lightweight UI elements, you might want to check out the Feathers framework, which is built on top of Starling: http://feathersui.com/

When Approving from notificaiton attachement getting wrong message page.

Hi,
I am getting a mail for approving with notification attachment.
When I am opening it asking me password twice to open the page.
After entering the password for 2 times I am getting into the page.
When I am pressing the button Approve I am getting the following message page.
" The request was successfully reassigned"
How can I change this to the correct message.
Can anybody help me in this.
Regards,
Sunil.l

Do you also have this issue if you temporarily switch to Private Browsing mode?
*https://support.mozilla.org/kb/Private+Browsing
*Tools > Options > Privacy, choose the setting <b>Firefox will: Use custom settings for history</b>
*Select: [X] "Always use private browsing mode"
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
See also:
*https://support.mozilla.org/kb/fix-login-issues-on-websites-requrie-passwords

Lost authorization when switching between users

Hi,
My wife and I have our iPods (a nano and a shuffle) set up on my PowerBook in different user accounts. We also buy songs from the iTunes Store using our separate Apple IDs. Every time one of us logs in, we are told that we have to authorize the computer to play our own purchased songs. Once authorized,
everything is fine until the other one of us logs in and...we have to re-authorize the computer again and so on.
This is a real pain, especially as we do not have a permanent internet connection. Can anyone help?
Thanks very much! Mike
PowerBook G4 Mac OS X (10.3.7)

Thankyou, VHteacher (see today's posts).
The solution here is ensuring that all users are at Admin level and to authorize both users from each iTunes account. It now works beautifully.
Thanks once again! Mike

Why am I getting ErrorCode: OperationNotSupported _Code: 204 When I am trying to get campaigns from sandbox account

Hi All,
Seasonal Greetings.
I am new one to bing ads . I am trying to get Campaigns from my sandbox account. The following is my code.
<?php
// To ensure that a cached WSDL is not being used,
// disable WSDL caching.
ini_set("soap.wsdl_cache_enabled", "0");
try
//$accountId = <youraccountid>; // Application-specific value.
$accountId = "8951263";
// Use either the sandbox or the production URI.
// This example is for the sandbox URI.
$URI =
"https://api.sandbox.bingads.microsoft.com/Api/Advertiser/v8/";
// The following commented-out line contains the production URI.
//$URI = "https://adcenterapi.microsoft.com/api/advertiser/v8/";
// The API namespace.
$xmlns = "https://adcenter.microsoft.com/v8";
// The proxy for the Campaign Management Web service.
$campaignProxy =
$URI . "CampaignManagement/CampaignManagementService.svc?wsdl";
// The name of the service operation that will be called.
$action = "GetCampaignsByAccountId";
// The user name, password, and developer token are
// expected to be passed in as command-line
// arguments.
// $argv[0] is the PHP file name.
// $argv[1] is the user name.
// $argv[2] is the password.
// $argv[3] is the developer token.
if ($argc !=4)
printf("Usage:\n");
printf(
"php file.php username password devtoken\n");
exit(0);
$username = $argv[1];
$password = $argv[2];
$developerToken = $argv[3];
$applicationToken = "";
// Create the SOAP headers.
$headerApplicationToken =
new SoapHeader
$xmlns,
'ApplicationToken',
$applicationToken,
false
$headerDeveloperToken =
new SoapHeader
$xmlns,
'DeveloperToken',
$developerToken,
false
$headerUserName =
new SoapHeader
$xmlns,
'UserName',
$username,
false
$headerPassword =
new SoapHeader
$xmlns,
'Password',
$password,
false
$headerCustomerAccountId =
new SoapHeader
$xmlns,
'CustomerAccountId',
$accountId,
false
// Create the SOAP input header array.
$inputHeaders = array
$headerApplicationToken,
$headerDeveloperToken,
$headerUserName,
$headerPassword,
$headerCustomerAccountId
// Create the SOAP client.
$opts = array('trace' => true);
$client = new SOAPClient($campaignProxy, $opts);
// Specify the parameters for the SOAP call.
$params = array
'AccountId' => $accountId,
// Execute the SOAP call.
$result = $client->__soapCall
$action,
array( $action.'Request' => $params ),
null,
$inputHeaders,
$outputHeaders
print "Successful $action call.\n";
print "TrackingId output from response header: "
. $outputHeaders['TrackingId']
. ".\n";
// Insert a blank line to separate the text that follows.
print "\n";
// Retrieve the campaigns.
if (isset(
$result->Campaigns
if (is_array($result->Campaigns->Campaign))
// An array of campaigns has been returned.
$obj = $result->Campaigns->Campaign;
else
// A single campaign has been returned.
$obj = $result->Campaigns;
// Display the campaigns.
foreach ($obj as $campaign)
print "Name : " . $campaign->Name . "\n";
print "Description : " . $campaign->Description . "\n";
print "MonthlyBudget : " . $campaign->MonthlyBudget . "\n";
print "BudgetType : " . $campaign->BudgetType . "\n";
print "\n";
catch (Exception $e)
print "$action failed.\n";
if (isset($e->detail->ApiFaultDetail))
print "ApiFaultDetail exception encountered\n";
print "Tracking ID: " .
$e->detail->ApiFaultDetail->TrackingId . "\n";
// Process any operation errors.
if (isset(
$e->detail->ApiFaultDetail->OperationErrors->OperationError
if (is_array(
$e->detail->ApiFaultDetail->OperationErrors->OperationError
// An array of operation errors has been returned.
$obj = $e->detail->ApiFaultDetail->OperationErrors->OperationError;
else
// A single operation error has been returned.
$obj = $e->detail->ApiFaultDetail->OperationErrors;
foreach ($obj as $operationError)
print "Operation error encountered:\n";
print "\tMessage: ". $operationError->Message . "\n";
print "\tDetails: ". $operationError->Details . "\n";
print "\tErrorCode: ". $operationError->ErrorCode . "\n";
print "\tCode: ". $operationError->Code . "\n";
// Process any batch errors.
if (isset(
$e->detail->ApiFaultDetail->BatchErrors->BatchError
if (is_array(
$e->detail->ApiFaultDetail->BatchErrors->BatchError
// An array of batch errors has been returned.
$obj = $e->detail->ApiFaultDetail->BatchErrors->BatchError;
else
// A single batch error has been returned.
$obj = $e->detail->ApiFaultDetail->BatchErrors;
foreach ($obj as $batchError)
print "Batch error encountered for array index " . $batchError->Index . ".\n";
print "\tMessage: ". $batchError->Message . "\n";
print "\tDetails: ". $batchError->Details . "\n";
print "\tErrorCode: ". $batchError->ErrorCode . "\n";
print "\tCode: ". $batchError->Code . "\n";
if (isset($e->detail->AdApiFaultDetail))
print "AdApiFaultDetail exception encountered\n";
print "Tracking ID: " .
$e->detail->AdApiFaultDetail->TrackingId . "\n";
// Process any operation errors.
if (isset(
$e->detail->AdApiFaultDetail->Errors
if (is_array(
$e->detail->AdApiFaultDetail->Errors
// An array of errors has been returned.
$obj = $e->detail->AdApiFaultDetail->Errors;
else
// A single error has been returned.
$obj = $e->detail->AdApiFaultDetail->Errors;
foreach ($obj as $Error)
print "Error encountered:\n";
print "\tMessage: ". $Error->Message . "\n";
print "\tDetail: ". $Error->Detail . "\n";
print "\tErrorCode: ". $Error->ErrorCode . "\n";
print "\tCode: ". $Error->Code . "\n";
// Display the fault code and the fault string.
print $e->faultcode . " " . $e->faultstring . ".\n";
// Output the last request.
print "Last SOAP request:\n";
print $client->__getLastRequest() . "\n";
?>
http://msdn.microsoft.com/en-us/library/bing-ads-campaign-management-php-samples-get-campaigns(v=msads.80).aspx
But I am getting responce
GetCampaignsByAccountId failed.
ApiFaultDetail exception encountered
Tracking ID: efa654c5-b112-4e96-8c3d-79bac7e70112
Operation error encountered:
Message: This operation is not supported.
Details:
ErrorCode: OperationNotSupported
Code: 204
s:Server Invalid client data. Check the SOAP fault details for more information.
Last SOAP request:
<?xml version="1.0" encoding="UTF-8"?>
<SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:ns1="https://adcenter.microsoft.com/v8"><SOAP-ENV:Header><ns1:ApplicationToken></ns1:ApplicationToken><ns1:DeveloperToken>BBD37VB98</ns1:DeveloperToken><ns1:UserName>-XXXXXX-</ns1:UserName><ns1:Password>-XXXXX-</ns1:Password><ns1:CustomerAccountId>8951263</ns1:CustomerAccountId></SOAP-ENV:Header><SOAP-ENV:Body><ns1:GetCampaignsByAccountIdRequest><ns1:AccountId>8951263</ns1:AccountId></ns1:GetCampaignsByAccountIdRequest></SOAP-ENV:Body></SOAP-ENV:Envelope>
Please Help me to get out of this .
Thank you in advance.
Deepa Varma

Hello Nalin,
Thank you for the reply . Now I am using
$campaignProxy ="https://api.sandbox.bingads.microsoft.com/Api/Advertiser/CampaignManagement/v9/CampaignManagementService.svc?wsdl" ;
// The API namespace.
$xmlns = "https://adcenter.microsoft.com/v9";
$xmlns = "https://bingads.microsoft.com/AdIntelligence/v9";
But I am getting
GetCampaignsByAccountId failed.
AdApiFaultDetail exception encountered
Tracking ID: ca31d743-7b7b-4479-8082-44997d60d549
Error encountered:
Message: Authentication failed. Either supplied credentials are invalid or the account is inactive
Detail:
ErrorCode: InvalidCredentials
Code: 105
s:Server Invalid client data. Check the SOAP fault details for more information.
Last SOAP request:
<?xml version="1.0" encoding="UTF-8"?>
<SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:ns1="https://bingads.microsoft.com/CampaignManagement/v9" xmlns:ns2="https://adcenter.microsoft.com/v8"><SOAP-ENV:Header><ns2:ApplicationToken></ns2:ApplicationToken><ns2:DeveloperToken>BBD37VB98</ns2:DeveloperToken><ns2:UserName>vbridgellp</ns2:UserName><ns2:Password>XXXX</ns2:Password><ns2:CustomerAccountId>8951263</ns2:CustomerAccountId></SOAP-ENV:Header><SOAP-ENV:Body><ns1:GetCampaignsByAccountIdRequest><ns1:AccountId>8951263</ns1:AccountId></ns1:GetCampaignsByAccountIdRequest></SOAP-ENV:Body></SOAP-ENV:Envelope>
I am able to login to sand box UI and see my campaigns. What may be reason for the error ?
Thank you in Advance.
Deepa Varma

Why do I get a prompt to authorize when switching from an HTTP GET to an HTTP POST?

Similar Messages

Maybe you are looking for