Why do i get a square box on my home screen when i press the bottom button three times?
Why do i get a square box on my home screen when i press the bottom button three times?
You are enabling VoiceOver.
-> https://www.apple.com/accessibility/ios/voiceover/
Settings > General > Accessibility > VoiceOver and turn it off.
Similar Messages
-
Help, my iphone 5 is locked and will not function! I've turned it off and on and it has the same fault. What ever you press on the screen highlights with a box round it. When you press the round button with the square in the centre the voice on the phone tells you the time. Then the voice says screen lock. If I try and unlock the phone the voice says phone unlock but you can't put the code in. If you hight the box it will say the number but not put the code in?! What's the crack?
Quickly Triple tap the home button to de-activate VoiceOver.
-
Why isn't my Face Time view expanding to show the entire screen when I press the arrows on the corners of the screen? I'm only getting a narrow view.
If you've tried holding down both buttons together for 30-60 seconds and still nothing, you need to make an appointment at your nearest Genius Bar to have it evaluated. They will give you your options at that time.
-
recently recieved a second hand Iphone 4. I was testing the Camera, the rear one worked perfectly fine, however when i pressed the switch button the front facing camera shutter freezed and started flickering. In order to get it back to the rear camera I have to reset my settings. Does anyone know why the front facing camera is doing this and how i can fix it.
iPhone 4, iOS 5.1.1I would ask the person you received it from if they've had this issue.
You can completely close out of the camera, then do a reset, hold down the home/power button together until yo usee the apple logo and then release, then wait for you phone to boot back up. -
I am trying to install iTunes on my Windows PC (I've tried on a W7 W8 and W8.1) After clicking the Download Now button my browser goes to the Thank you page and I get an Opening iTunes64Setup.exe dialog with a Save File and a Cancel button. I press Save File but nothing else happens.
No, Nothing happened, nothing was downloaded. When I say nothing happened I mean NOTHING HAPPENED, What can I say to make it more clear. How could I run a file that wasn't downloaded.....Nothing happened, rien, nada, b***** all. Why would I post a message saying "When I press the Save button nothing happens" if something had been downloaded.
I've found out why. It is because I am using Firefox. Presumably a case of Apple treating us users of the superior Operating system (Windows) with distain. -
why when I press the command button and number two, yahoo comes up instead of the ‘at’ key? how can I fix the command shortcuts? help me please.
try pressing the shift and 2 key to get the @ symbol.
if that doesn't work for you - go to system preferences - keyboard and change it there.
good luck -
When I press the iTunes button on my ipod touch I get the message 'cannot connect to iTunes store' . My wifi is working fine, I can connect to safari & you tube, no parental setting in place, and time and date are correct. Can anyone help please? I have restored my ipod to factory settings and rest it.
I also tried moving the date forward by a year and then moving it back to normal and it still doesn't work. i can't find an automatic update of time zones on my itouch to turn this off.
-
Love Firefox but it's annoying that if I'm using a search engine (I use lots of subscription legal search databases), when I press the back button all the data I entered in the search boxes has disappeared. I'm sure Firefox didn't use to do that?
Please do the following.<br><br>
#Click the Firefox button, go to '''Options '''| '''Options''' | '''Privacy'''.<br><br>
#In the dropdown menu at the top, change it to "'''Use custom settings for history'''"<br><br>
#Checkmark the option: "'''Remember Search and Form history'''".<br><br>
#Remove the checkmark from: "'''Clear history when Firefox closes'''". -
before updating my i phone 4s , i used to be able to double press the bottom button to delete the unused icons on my phone to stop wasting the battery. since up dating double pressing the bottom doesnt work , so i dont know how to get rid of the unused i cons , can anyone help me.
Double tap the home button and swipe upwards on the preview of the App (not the App Icon).
http://manuals.info.apple.com/MANUALS/1000/MA1565/en_US/iphone_user_guide.pdf -
Workin in Live View when I press the zoom button to focus I get a white screen with a 5x or a 10x wr
Working in Live View When I press the zoom button to focus I get a white screen with a 5x or a 10x written. I don't get the zoom picture. It just started doing this today and I've been using it for years. Any help? Thank you. OH I have a 450D (rebel xsi)
Solved!
Go to Solution.Which camera model?
Also, what are your exposure settings? Canon DSLRs do exposure simulation in live-view. So if the settings would result in an over-exposure you might be cropping in to view an all white area.
Tim Campbell
5D II, 5D III, 60Da -
Hallo ,I have an IMAC 21.5. which does not start.When i press the power button i hear only beep with an interval of 4-5 seconds.Some times when i take off the RAMS and put them again then get a white screen and shows that i have to insert a bootable device.Then i bought OSX mountainlion on line and wrote it on a DVD and tried with a USB key board to start the DVD.But does not work.Please help me to get this imac work.
Thankyou in advance for your help.
TerrenceHey terremo,
Thanks for the question. From the information you provided, it sounds like the iMac is successfully turning on, however video is not displayed. These symptoms can usually be isolated further by the troubleshooting steps in this article:
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/HT1573
Thanks,
Matt M. -
My probably 10 year old MaycBook died. It won't start. When I press the power button, it gets power, but it only lights up and a scratching noise starts like something is spinning. A file folder with a question mark periodically flashes... Help!!!
You don't have a Macbook if you are running OS 9 and it's 10 years old. The first Macbook is an Intel Mac that came out in 2006 running 10.4.x. You most likely have a Powerbook. Try posting in the Powerbook forum.
A flashing question mark appears when you start your Mac -
Hello
I have a small problem which I hope someone can advise me on ......
Everytine I press the Latecny button on Logic 9 the audio will stop coming out of the LEFT and RIGHT speakers and only come out of the LEFT speaker ?
Audio sent out of DAW --------> Mixng Deck ------> back into Soundcard via SPDIF (digital) on inputs 9/10
I am sening al my sounds out of the computer to be summed on a mixing decks and then the 2 channles of audio from the deck is coming back into my soundcard as an digital a signle on INPUTS 9/10.
Can anyone please advise ..........!?!Might want to read on what Low Latency mode does + why and when you should use it.
It's basically only used in realtime monitorinr when recording and/or when recording softsynths.
By reading the docs you should be able to figure out why the right side is being muted.
http://documentation.apple.com/en/logicpro/usermanual/index.html#chapter=41%26se ction=2%26tasks=true
Be sure software monitoring is Off when recording the summed input. -
Why do I get a red static line across my screen when putting in my apple ID
Why do I get red static lines across my screen when I put in my apple ID ??
Crafting Actions Package UPDATED May 2, 2014 Updates some text and added StampExif Action and Script.
Contains
Action Actions Palette Tips.txt
Action Creation Guidelines.txt
Action Dealing with Image Size.txt
Action Enhanced via Scripted Photoshop Functions.txt
CraftedActions.atn Sample Action set includes an example Watermarking action
Sample Actions.txt Photoshop CraftedActions set saved as a text file.
More then a dozen Scripts for use in actions
Example
Download -
Have just tried to open iTunes, and I get a blank window (no dialogue, just a blank window) with an OK button. When I press OK, it closes down (not having opened anything) and shuts down. I've tried opening while holding down the option key, as I would to open with a new iTunes folder, and I"m getting the same empty window with an OK. Very frustrating, has anyone seen this, and can anyone help? Thanks in advance, Kate
so, I called a friend who's more experienced than I am. He walked me through some steps, checking iTunes and we got the same dialogue -free window with the OK button. We then uninstalled iTunes, downloaded it afresh, and it opened with no problems. Seems to all be there, music, tv, etc. Not sure what the issue was, but it has stopped this problem.
Maybe you are looking for
-
Oh. When I pushed the "Ask your question of the community" I got this empty box. But I've already asked my question. Should I copy and paste it into this box? > I want to ask a question but is it supposed to go in this "Ask Your Question" field or sh
-
My pictures application will not open since i got the new ios5 update
After I updated my Iphone to the new ios5 i can no longer open the pictures app and my phone won't allow me to take or save pictures. The HDR feature ruined my phone and tech is less than helpful with fixing this problem. I have restored, turned off,
-
Identifying the failed node name
I use javax.xml.bind.Unmarshaller to unmarshall the xml object. When the schema validation fails, the unmarshaller throws the invalid value found in the xml. I need to identify the invalid value as well as the node name which failed the validation. I
-
Video Capture - How to Shut off the Internal Camera on a MAC?
Have MAC CS4...BUT im a PC GUY!! Need help with capture. I have a MAC BOOK Laptop OSX-10 and when I try to capture from the firewire attached sony camera I get the built in laptop camera instead of the Sony Camera. I have tried different standard and
-
VcmFailure received: Not Ready
Hi, I get an error which i cant figure out :- steps followed : 1> upgrade of WebAS 640 to SP17 on the JDI server 2> successful import of SAP-JEE, BUILDT, & JTECH into a track 3> failure of MSS & ESS package imports into CMS 4> error message specified