Why do i get a thin tear moving thru my video when playing on my lcd?

Why do i get a tear thru my video when playing on my lcd? I have tryed 60mhz monitors & 120's but I still get a single thin tear moving through the image. It happens mainly with HD footage when there is a lot of camera movement. I have an invidia gtx580 card, 24 gigs ram, cs5.5, 6 core proc. I'm using HDMI as I have a 42" tv hooked up to it at the moment. When I open the invidia software, the highest it goes to is 60 hertz & that is what it is set to.
Is there a setting that will take away this moving tear?

Different monitors, totally dif systems. They are DVI.
This sys is 3 ft sheilded hdmi. I only see the thin line tear when the camera moves fast. The monitor is 120 refresh rate & i tryed a 60 & it did the same thing. Mainly on HD foot when the camera moves quickly the thin horizontal tear appears temporarily then disappears when the action slows

Similar Messages

Why do I get a constant clicking through my ear buds when playing music or videos?

Why do I get a constant clicking through my ear buds when playing music or videos? I am using Samsung phone earbuds. The clicking is at a 1 second intervals, and actually partially drops out the sounds. Thanks

Have you tried another set of earbuds so that you can rule out a problem with the Samsung's?

Why am I getting a delay on one of my tracks when I have added no effects?

Why am I getting a delay on one of my tracks when I have added no effects? It sounds like a latency problem.

AVI should never be used for iDVD. Even Microsoft abandoned AVI and moved to WMV. The reason for this is that AVI is limited to 2 GB is file size and has limited video codec support. If you have problems with AVI in iDVD, convert it to Quicktime right away.

Why do I get a spinning wheel during a youtube dideo when my ISP download speed is over 30 meg?

Why do I get a spinning wheel during a youtube dideo when my ISP download speed is over 30 meg?

You may have a 30meg connection onto the internet but a page will only come in as fast as the server can deliver it. A popular site like YouTube will have very many concurrent users making page requests, and the nature of YouTube's content means that each connection is very data intensive. If you are trying to access a particular popular video, or if you are trying to access YouTube at a peak time when a lot of other people are trying to access it at the same time, like early evening say, then the server may be struggling to service all the requests hence you may experience a delay in viewing your video irrespective of the speed of your internet connection.

Why do I get a black exclamation mark blocking a photo when I click on a thumbnail in iPhoto?

Why am I getting a triangle with a black exclamation mark when I click on theumbnails in iPhoto?

That's an indication that the file path/link between the thumbnail and master/original file has been broken. Try the following to fix the links:
1 - launch iPhoto with the Command+Option keys held down to open the First Aid window. Be sure to follow the circled recommendation in the screenshot.
2 - run Option #4, Rebuild Database.
What system and iPhoto versions are you using?

Why do i get a square box on my home screen when i press the bottom button three times?

Why do i get a square box on my home screen when i press the bottom button three times?

You are enabling VoiceOver.
-> https://www.apple.com/accessibility/ios/voiceover/
Settings > General > Accessibility > VoiceOver and turn it off.

Why do I get a humming noise from my stereo speakers when I plug in airport?

Why do I get a humming noise from my stereo speakers when I plug in my airport?

Temporarily, please turn off your amplifier and/or powered speakers and disconnect the plug that goes into the AirPort Express audio jack.
Plug a pair of headphones directly into the AirPort Express and listen for a few minutes.
Do you hear the "hum" that way?

TS3406 why do i get the message (LG-HBM760,I phone, speaker)when trying to make a call?

why do i get the message (LG-HBM 760,iPhone,speaker) when trying to make a call?

If you have a bluetooth device connected to the phone, it is allowing you to select the audio device you want to use to handle the call with. There should be a checkmark by the device it is going to use, and you can change that if you like.

Why do I get white lines surrounding PSD or Tiff transparencies when exported as a PDF for print ?

Why do I get white lines surrounding PSD or Tiff transparencies when exported as a PDF for print - Indesign Version 9.2?
I recently upgraded creative suite - now I am having issues with white lines surrounding any tiffs or PSDs when exporting for print.
I initially thought it was an acrobat viewer problem, but it seems to be effecting print. Please let me know if anyone knows the answer to this problem. thanks!

Thanks Bob, to date I have simply used the High Quality Print default, which is actually Acrobat 4 (PDF 1.3) - I have never had issues before - until now when I upgraded my software..

Why do I get "Not enough RAM to launch" pop up when I try to open PhotoDeluxe 4 on my new PC?

Why do I get "Not enough RAM to launch" pop up when I try to open PhotoDeluxe 4 on my new PC?

Which version of windows are you using?
Is your windows system 32 or 64 bit?
It may be that PhotoDeluxe 4 just won't work on newer windows operating systems.
Have you tried right clicking on the PhotoDeluxe 4 shortcut selecting Properties and trying a Compatibility mode such as windows xp or windows 2000 under the Compatibility tab?

Why do have to download adobe flash player every other day, when playing facebook games?

I play facebook games and some need adobe flash player. I have to download it everyother day why?

windows 7 is the system
Internet explorer
In a message dated 7/14/2013 12:41:31 P.M. Mountain Daylight Time,
[email protected] writes:
Re: Why do have to download adobe flash player every other day, when
playing facebook games?
created by C F McBlob (http://forums.adobe.com/people/CFMcBlob) in
Installing Flash Player - View the full discussion
(http://forums.adobe.com/message/5498048#5498048)

Why am I getting different values based on order of input when the task type remains the same?

I'm having a hard time understanding the results I'm getting when I input task information. Here are the scenarios with different, unlinked fixed work tasks:
I estimate a task will take 2 hrs to complete and put this into work. If I add 1 resource, work = 2 hrs, duration = 1 day?, Resource A = 25%
On the same task, if I add Resource B (along with keeping A), duration = 0.2 days, Resource A remains 25% and Resource B = 100% (no % shown)
If I try the same scenario (adding first resource, then adding a second) on another task, occasionally it will give a duration of 0.91 days??? What the hell is that about?
If I add 2 hrs for work then add both Resource A and Resource B at the same time I get duration = 0.5 days, Resource A = 25% and Resource B = 100%. Why is it giving a duration of 0.5 days and why does it not adjust the unit % for Resource B?
This one is really blowing my mind. If I don't add work but instead add both resources at the same time first it's either making work 8.2 hrs OR 16 hours! I've gotten this result on the same exact task doing the same exact input. How can this differ?!
No work input, both resources added initially and IF I get the correct 16 hours with 1 day duration, then I go ahead and change work to 2 hours, which produce Resource A & B = 100% and duration = 0.13 days.
This last scenario is the duration result I want to see so the resources can work on multiple tasks in 1 day, but I typically try to input the work or duration estimates into the schedule and then resources last. I also don't understand how there can be
such a wide range of results based on such similar scenarios. Also, having to do it this way creates another step since I have to go back and change the work...although I guess I would be doing that if I input estimates first.
Can anyone explain why I'm getting those very head scratching differences, as well as provide some insight into how you initially develop a schedule (order of inputs)? I'm wondering if this has something to do with the change in 2010 regarding resources
that I still don't understand?

Thank you Julie for the quick reply. As indicated in the first part of my question all these scenarios are dealing with Fixed Work, so yes by default they are effort driven. I should have clarified on the 1st scenario the question mark was just to show duration
had not changed, I wasn't actually questioning why it hadn't changed. Scenario 1 worked as expected. Although I don't fully agree with it, Scenario 2 also worked as expected.
Scenario 3: Yes it is effort driven (fixed work). Resources are just test/fake resources so all information, including calendars, is default. This is one of those cases where I can produce that unusual result only on occasion, not everytime.
4. In my scenario it's fixed work, but I do get the same result as you with fixed unit. Question still remains in both cases of why is the duration 0.5 days on 2 hours total work? Also, why are both units 25% in fixed units, but in fixed work Resource A
is 25% and Resource B is 100% when in both cases they are working 1 hour? Lastly, if Units is going to be changed in this case then why isn't it 13% (1/8 hours)?
5. This is also fixed work and I'm not touching duration in any of the scenarios. Day is still default at 8 hours. I was assigning resources via Resource Names on the Gantt View. I'm thinking this had to be some sort of glitch because I can't consistently
produce the 8.2 hours result, but it happened multiple times.
I also follow the same steps you do, other than I guess the last one. When you say you enter work estimates while assigning does that mean you do that in the split pane/task details form? I've typically done it from the Gantt View, but that seems to be what's
causing my issue because when I tried doing it from task details it is giving me the duration I want. So thank you for that. I still don't understand why there is such a wide range of results, but at least it makes more sense to me that 100% Unit working on
a task duration of 0.13 days is 1 hour.
I apologize for how long this, but I'm trying to get out of some bad habits I've picked up by being forced to develop dumbed down schedules for the past few years.

Why am I getting a mf error domain 1032 message and when I put my password in it keeps coming up?

Why am I getting a mf error domain 1032 message when trying to get my email? I put password in and it keeps going back to error message?

Try what Google threw out:
Tap Settings > Mail, Contacts, Calendar and delete your email account.
Then tap Settings > Safari > and Tap Clear History and Clear Cookies and Data.
Now tap Settings > Mail, Contacts, Calendar and re-enter your email account details.

Why do I get "Secure Link to iTunes store Failed" message when trying to access iTunes store?

Why do I get the message "Secure Link to iTunes store failed" when I do diagnostics checks on the iTunes version 10.6 that I just installed? I have reinstalled it three times and have never been able to access the itunes store, or any Help sites thru the itunes app. I have disabled my firewall, etc. to no avail. Any ideas? I have XP running.

Close your iTunes,
Go to command Prompt -
(Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
(Win XP SP2 & above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
In the "Command Prompt" screen, type in
netsh winsock reset
Hit "ENTER" key
Restart your computer.
If you do get a prompt after restart windows to remap LSP, just click NO.
Now launch your iTunes and see if it is working now.
If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/TS4123?viewlocale=en_US

Why do I get error due to lack of cashe memory when uploading a web gallery?

I have already uploaded several galleries without any issues using the same template. Now have recieced this message for several different collection. I have increased the avilable cache meomry in the setting and restarted the computer.
I have changed template using LR6.
This is in Swedish but the message says; The export was not completed correctly
JPEG - files were created with best available pixel data in image cache memory

> Why do i get "error #3: "E:\lv45\mgsource\memory.c at line 515" when i
> call a dll from labview? one of the inputs is a cluster whisch i set
> to adapt to type input.
>
This happens when one of the elements of the cluster has been
overwritten. Look closely at any strings or other variable elements in
the cluster. It is important that the buffer be allocated to the size
expected by the DLL before it is called.
Greg McKaskle

Why do i get a thin tear moving thru my video when playing on my lcd?

Similar Messages

Maybe you are looking for