Why do I get an attaching message when sending a message with embedded pictures.

Sometimes when I try to send a message with embedded images, I get a message stating "Status: Attaching . . . with a green Progress: bar that appears to be 100% but still running". The problem is that it never goes away and the message is never sent.

Do you have MMS turned on? Do you have a data connection?

Similar Messages

  • Why do I get an undelivered error when sending pictures via iMessage?

    When I send picture messages to other iPhone users, I get an error that it was undelivered even though the other person received the picture. I have to send the message as a text to remove the error on my phone. Then the other person receives the same message multiple times. I do not have this issue when I send a picture to a non-Apple phone

    Have you tried to download anything else?

  • Lost messages when sending email offline with iOS6?

    I'm using iOS6 on an iPad 3rd generation, WiFi only.
    When I'm in airplane mode, or I'm not connected to a Wifi access point I can compose e-mail messages and press Send, and rather than getting an error saying I'm offline, the iPad displays the "sending" progress bar and makes the "wooshing" noise that it normally does if it were offline, but obviosuly the mail isn't sent - 'cos I'm not online.
    However, when I connect to  Wifi point, the e-mail isn't sent - the mail doesn't appear in the sent folder, and it's not in a Drafts folder either, so I can't attempt to resend.
    I'm getting the same behaviour for both an Exchange and an IMAP/SMTP account.
    Both worked previously with iOS 5 (you'd get an error and it wouldn't send the message until you connect to an access point).
    Is anyone else seeing the same problem? Any pointers to a fix or work-around?
    Many thanks,
    Mike

    I have experienced a similar problem. Having sent an email and heard it go (the "wooshing" noise) I noticed a few minutes later the small symbol next to my btinternet mail box indicating that it had lost touch with its server or gone offline. I didnt think much of this but the next day I noticed that this email is not in my sent emails ( I double checked by logging into my BTemail account online and it is not in the sent email folder there either). The email was not sent, and is not saved as a draft. That's 30 minutes work gone to waste and the only reason I have found out is that I suspect this has happened before so I made  a point of checking sent items. On previous occasions I have thought that maybe I deleted the email by mistake, or didnt press send or made some other mistake. This time though I definately pressed send, definately heard the wooshing noise, and the email is now gone.
    The solution would seem to be to stop using Apple's Mail system to send emails and log into the mail account on line.

  • Why do I get an error 1000 when using vi server with invoke nodes?

    I use the invoke nodes with set control value and run vi. I want to use the called vi on the same machine and in parallel and I do not want to wait until it is done. If I set wait until done to true it works, if I set it to false I get the error message. Why is that and how can I solve that problem??

    Hi,
    Using LabVIEW 7 I was able to do what you want. I modified an existing example. The main vi will load the a second VI, and then the main VI will do "set control value" on a numberic labeled "Numeric" and you'll be able to see that it is changing the control value.
    I've attached the modified VI.
    Attachments:
    parallel.zip ‏148 KB

  • HT2736 Why do I get invalid gift error when sending iTunes gift

    How to solve error "invalid gift" enter valid email address?

    Hi,
    Are you trying to send the gift to a contact on your phone? It requires a fully qualified email address to send the gift to.
    E.g. - if your contact for the gift was 'Bob' - you can't send it to him like that. It would need to be his full email address
    Hope this helps,
    D.
    <E-mail Edited by Host>

  • Why do I get and how do I correct the message _ This video is only available in the US - when I am in the US - I am trying to view Downton Abbey on my Ipad using the PBS app.?

    why do I get and how do I correct the message _ This video is only available in the US - when I am in the US - I am trying to view Downton Abbey on my Ipad using the PBS ipad app.? Thanks for your help

    Privacy is an Option in the Settings App, its not in Safari as that applies only to Safaris browsing.  Its called Privacy in  IOS 6  In previous versions the same thing can be found under Location Services.

  • Why am I getting syntax error messages when sending emails thru MS Office:MAC 2011?

    Why am I getting suntax error messages when sending emails thru my outlook on my MacPro?

    What are the exact and complete error messages?

  • Why am I getting two different conversations when the same person txts me and sends me an I message? I thought they should be in the same conversation?

    Why am I getting two different conversations when the same person txts me and sends me an I message? I thought they should be in the same conversation?

    I'm experiencing something similar. My conversations are kept together but if the screen is opened to a conversation and I receive a text from that person it doesn't show up on the screen. The message alert in the upper corner indicates a new text but I have to back out of the screen and go back in to read it.

  • Why do I get error 150:30 when I try and send a photo to Elements 8?

    Why do I  get error 150:30 when I try and send a photo to Elements 8 from a PC with windows8?

    My wife had this problem for the past few days for a specific phone number. These instructions fixed it -- without having to restore from backup or contact the carrier.
    http://www.timothydeblock.com/blog/2014/5/12/fix-message-sent-using-invalid-numb er-of-digits-msg-2114
    Open Contacts -> select the contact -> select edit -> scroll all the way to the bottom and delete contact (delete multiple entries of the same phone number, my wife had five).
    Open the Messages app -> select Edit -> select the red circle and then select delete. Do this for both the person and the messages you received.
    Open the Settings app -> scroll down and select Messages -> turn off messages, by selecting the switch, and any other options turned on.
    Turn off your phone and then turn it back on.
    Go straight to messages and compose a new message and put in the phone number of the person you're trying to text. Send and that person should receive the text message. Add the person to your contacts and go back into message settings to turn on any other options you want on that you turned off.
    John

  • Why do i get an error 8003 when trying to download apps for my IPAD?

    why do i get an error 8003 when trying to download apps for my IPAD?

    There's some advice on that one in the "Error -50," "-5000," "8003," "8008," or "-42023" section of the Specific Conditions and Alert Messages: (Mac OS X / Windows) section of the following document:
    iTunes: Advanced iTunes Store troubleshooting

  • Why do I get "error on page" when I try to contact anyone at apple anywhere?

    Why do I get "error on page" when I try to contact itunes billing support?

    Yes, I have NI-Watchdog  2.1.5 installed on my FP.
    In fact, I figured out what the Error-22011 problem was all about and I'm almost too embarrassed to say. I had Watchdog Configure.vi inside a while loop... so only the first iteration would be error free and for every iteration after that, the hardware would be "already in use". Hence, Error-22011.
    I've made it over that hurdle, but I'm still having problems.
    Now,I have both Watchdog Configure.vi and Watchdog Clear.vi outside the while loop and I put Watchdog Whack.vi inside the while loop (mainly to monitor the watchdog status output). I also wired the occurrence output of Watchdog Configure.vi to a second while loop in which there is a wait for occurrence.vi wired to a boolean indicator.
    If I disconnect the ethernet cable while this vi is running, the program pauses and I get a Labview generated message informing me of a lost connection however, there is no occurrence generated and the watchdog stays in "running" status.
    Apparently, I've misunderstood how to implement the watchdog vi's and I'll need someone to set me straight.
    Is there anyone who can help?
    Thanks,
    pmac

  • Why do I get faint horizontal lines when I print from elements 12 mac

    why do I get faint horizontal lines when I print from elements 12 mac

    Hi Ben,
    I can't reproduce that behavior.  The only two things I can think of at the moment are (1) you accidentally added a shortcut as a panel shortcut instead of a diagram shortcut or (2) the name of the object you specified isn't for the "Multiply" node, but for some other node (you said "Multiplication" in your initial post) that can only be dropped in certain places (i.e. maybe it's a node that is only valid in Simulation diagrams).  Can you post the following lines from your LabVIEW INI file so I can look into it further:
    QuickDropDiagramShortcuts
    QuickDropPanelShortcuts
    Let me know,
    -D
    Edit:  Yeah, what he said. 
    Message Edited by Darren on 10-13-2008 11:28 AM
    Darren Nattinger, CLA
    LabVIEW Artisan and Nugget Penman

  • Why do I get a black screen when i click on a PDF in a web page?

    why do I get a black screen when i click on a PDF in a web page? Firefox works as is should.

    Hi,
    From your Safari menu bar click Safari / Preferences then select the Extensions tab. If you have any installed, turn that off, then relaunch Safari. Try a PDF file.
    If it's not Extensions, open a Finder window. Select MacintoshHD in the Sidebar on the left. Now open the Library folder then the Internet Plug-Ins folder. If you see any files such as this:
    AdobePDF Browser or Viewer Plug-in
    Move it to the Trash, relaunch Safari.
    Carolyn :-)

  • HT3275 Since updating OS to Mountain Lion from leopard, I get the following error message when trying to backup with time machine on external drive.  Could not complete backup to media share.  The network backup disk does not support the required AFP feat

    Since updating OS to Mountain Lion from leopard, I get the following error message when trying to backup with time machine on external drive.  "Could not complete backup to media share.  The network backup disk does not support the required AFP features."  What are AFP features and how do I get Time Machine to backup to my current external backup?

    This means that your NAS does not support the required encryption. Update your NAS to the latest firmware or ditch it and buy a Time Capsule (they are the most reliable when using TM).

  • Why am I getting error code 1402 when trying to update adobe reader 10?

    Why am I getting error code 1402 when trying to update adobe reader 10?

    Impossible to guess the "why" with so little information, but this may be helpful if you want to solve the problem: Error 1402 | Error 1406 | Acrobat, Reader

Maybe you are looking for